318255006 Frigidaire Oven ā¤Range Bake Element is a ā¤tubular āresistive heating element used in frigidaire electric oven ranges to generate theā primary radiant heat for the bake function. As a highātemperature, metalāsheathed ā¢resistanceā device, theā£ element contains a resistance conductor withinā¢ an insulating filler ā¤andā¢ terminatesā£ at lugs āthat connect toā¤ the oven’s powerā feed; it is indeed designed āfor continuous duty at oven operatingā temperatures and āto āinterfaceā mechanically with oven ācavity mounts and electricalā¢ connectors.
Inside the appliance, the bake element serves as the main heat source for ā¢the bake ā£cycle āand interactsā¤ directly with the oven’s control system, temperature sensor/thermostat, terminal block orā£ relays, wiring harnessand protective thermal devices (fuses or thermal cutouts). Its electrical characteristics (wattage and resistance) determine heat output and warmāupā rate, āwhile itsā physical placement and condition affectā¤ heat distribution and temperatureā stabilityā in the cavity.Failures orā¢ impedance changes in the āelement can produce open circuits, shortātoāground conditions, uneven ā¢bakingorā incorrect temperature feedback to control electronics, so āthe āelement’sā¤ integrity is vital both forā¢ performanceā¢ and electrical safety.
In āthis article readers ā£will find a ātechnical overview āof the 318255006 bake āelement including its construction and function, guidance on how to verify compatibility and identify the correct replacement, commonā£ failureā¤ symptoms ā¤to watch for,ā¢ and diagnostic approaches such asā visual inspection āand basic continuity/insulation checks.The article will also cover āpractical ā£replacement considerations-matching physical dimensions, terminal ā£type and āpowerā£ ratingand postāreplacement checks-alongā with pointers on when to investigateā associated systems (controls, sensors, wiring) ratherā than replacing theā£ element alone.
Table ofā Contents
- Functionalā roleā and Performance Specifications of the Bake Element
- How theā 318255006 Frigidaire Oven Range Bake ā¢Element Operatesā£ Within the Oven Cavity
- Diagnostic signs: Common āFailureā£ Symptoms and Thermal Fault Indicators
- Compatibility, Model Fitmentā£ and Replacement Installationā¤ Considerations
- Q&A
- To Conclude
Functional Role and Performance Specifications ofā¢ the Bake Element
theā¢ 318255006 Frigidaire ā¤Oven Range Bake Element isā a ā¢tubular resistive heater mountedā at the oven floorā thatā£ provides the primaryā radiant and convective ā¤heat used during ā£baking. Its construction typically ā£consists ofā a high-resistanceā¢ alloy conductorā sealed insideā a metal sheath with ā¤compacted insulating fill; electricity passing through theā conductor produces heat distributed āalong the length of the element. ā¤In operationā¢ the elementā cycles on and off under thermostat or control-board commands to maintain set temperatures,and āits thermal performance ā¢isā resolute by the element’sā¢ wattage,the oven’s ā¢voltage supply (commonly 208-240 V in residential ranges),and the integrity ofā¤ theā£ sheath andā terminals.ā For replacement and compatibility, āmatch the physical mounting, terminal type (spadeā or bolt)andā the rated voltage/wattage rather than relying solely on ā¤appearance, ā£sence mismatched wattage ā£can change heat-up time and temperature regulation behaviour.
technically,ā common āfailure modes areā an open circuit ā(loss of continuity), a short to āchassis ground, localized sheath ā¤damage or ā£overheating that alters the element’s resistance profileandā connector corrosion.Simple diagnostics useful toā techniciansā¤ include verifying continuity with aā multimeter and calculating expectedā¢ resistance from theā element’s wattage ā¢and supply voltage āusing R = VĀ²/P; a measuredā¤ open circuit confirmsā replacement is needed,ā while a measuredā low resistance to chassis indicates a ground fault. Practical installation context: always ā¢isolateā¤ power, confirmā terminal orientation and bracket spacing before āfasteningand inspect the āoven’sā controlā¢ relay/thermostat if intermittent heating āpersists, since faulty controls ā¤can mimic element failures.
- Common symptoms: āno heat (open element),ā¢ uneven baking (partial element failure or ā£localizedā hot spots), visibleā blistering or deformation,ā and tripped breakers (short to ground).
- Repair guidance: verify voltage and wattage match, confirm continuity, replaceā£ with identical mounting and terminal āconfiguration.
| Item | Description |
|---|---|
| Voltage | Typical residential electric ranges operateā£ on ā£208-240 V; confirm āmodel-specificā rating. |
| Mounting/Terminals | U-shaped or straight tubularā element withā¢ spade or bolt terminals; physical ā¤fit must match ovenā cavity bracket ā¢locations. |
| Test method | Multimeter continuity and resistance check; use R = VĀ²/P to estimate expected ā¤resistance from rated ā¤power. |
| Failure modes | Open circuit, short to chassis ground, sheath corrosionand localized overheating ā¢altering resistance. |
How theā 318255006 āFrigidaire Oven Range Bake ā¢Element Operates within āthe Oven Cavity
The 318255006 Frigidaire Oven Range ā£bake āElement is the primary resistive heater mounted at the base of the ā¤oven ācavity that provides the radiant heat required for baking cycles. Internally it contains a ānichrome heating coil within a metal sheath; applying line voltageā causes the coilā toā dissipateā¤ power as heat, whichā radiates into theā¢ cavity and transfers by conduction through the ovenā£ floor and convection via internal air movement. The element isā¤ switched by the oven controller āorā¤ thermostat through relaysā¤ or solidāstate devicesā to modulate temperature; proper ā¤operation depends on ā¤matching theā¤ element’s āwattage,ā terminal spacingand mounting bracket to the specificā Frigidaire model to ensure ācorrect heatā¢ output andā reliable electrical connections.
Operational behavior andā¢ compatibility inform practical service steps: a ā£uniformly intactā¢ element cycles predictably ā¢and shows continuity, while sections with internal breaks, corrosionor sheath damage produce cold spots, uneven baking, āor visibleā¤ arcing.ā¤ Techniciansā diagnose faults by ā£visual inspection, measuring resistance (typical fullāsize ā¢bake elementsā produce resistances in the tens of ohms ā£depending onā£ wattage)and checking for continuity ātoā£ ground that would indicate a short.ā examples: an oven that fails to reach set temperature but has a working broiler often points to aā£ failed bake āelement āor ācontrol relay; repeated breaker trips with the element energisedā suggest insulation failure to āchassis ground. For ā£replacement, āverifyā£ mechanical fit,ā electrical ratingandā£ connectorā¤ type to maintain safe operation andā¢ consistent cooking ā£performance.
- Common symptoms: ā£no heat,ā£ uneven heating, visible blisteringā£ or breaks, tripped breakers.
- Basic checks: visual inspection, continuityā£ (ohms) āmeasurement, groundāleak test, verify control voltage atā element terminals.
- Compatibility notes: confirm terminal type, terminal spacingand ā£wattageā¤ beforeā£ replacing.
| Item | Description |
|---|---|
| Typical resistance | Generallyā¤ in the range of ~20-40 Ī© forā£ common 2,000-3,000 W elements (varies with model and power rating) |
| Connection type | Spade ā¤terminal ā£connectors; ensure ā£correct ā¤terminal spacing andā secure insulation ā¤boots |
| Location | Mounted āat the bottom rear of the oven cavity with two fasteners and externalā wiring routed toā the control module |
Diagnostic Signs: Common Failureā Symptoms and Thermal ā£Fault indicators
Theā 318255006 ā¤Frigidaireā Oven Rangeā¢ Bake Element isā a ā¤resistive heating component installed across ā¢the bottom of the oven ā¤cavity to convert electrical energy into heat for baking ā¢cycles. It functions as a ā¢passive resistor that the oven control applies voltage ā¢to in āorderā to maintain set temperatures; its ābehavior under load-steady glow, uniform surfaceā temperature-indicates normal operation.ā£ Compatibility is primarily with Frigidaire electricā¤ rangesā£ that specify theā same mounting and terminal configuration; mismatched elements can āfit physically but produce incorrect wattage and resistance,ā which alters ā£heat āoutput and control timing. Physical failure modesā include open circuits from internal breaks, local hot spots or blistering ā¤from insulation ābreakdownand shorts to the chassisā thatā¤ can blow fuses or trip breakers.
- No bake heat whileā£ other functions (broil,ā¢ convection fan) āoperate normally.
- Unevenā cooking or areas of ā£the oven that ā¢run hotter or ācooler than expected.
- Visibleā discoloration, ā¤blisteringor ābreaks in theā element sheath.
- Tripped circuit breakersā or blownā thermal fuses correlated with oven use.
- Burning āor ā¤electrical odor coming from the oven during operation.
Technicians diagnose element faults withā a visualā£ inspection followed byā¢ electrical tests: check for continuity between āthe element terminals āwith a multimeter and measure resistance to chassis ā£ground. Typical 240 V bake elements ā¢used in household rangesā present low tens of ohms ā¤at ā¤room temperature; an infinite ā¢reading between terminals ā¢indicates an openā element, while ā¢a low resistance between a terminal andā£ chassis indicates a short-to-ground. If the element ātests within expected resistance but symptoms persist (long preheat times, erratic cycling),ā£ confirm the oven ācontrol relay, thermostat sensor,ā¤ and wiringā¢ before replacing theā elementā to avoidā£ unnecessary partā changes.
| Item | Description |
|---|---|
| Typical resistance | Approximately 15-40 Ī© atā£ room temperature āfor commonā 240 V oven bake elements (varies with wattage). |
| Failure indicators | Infiniteā terminal-to-terminal resistance = open; low terminal-to-chassis āresistance ā¤= short-to-ground. |
Compatibility,ā¢ Model Fitment and Replacement Installationā Considerations
The 318255006 Frigidaire āOven Range Bake Element is a direct-heating resistanceā element āused to generate ā¢the bakeā¤ function āin compatibleā£ electricā ranges.ā£ Compatibility depends on electrical rating, physical dimensions, terminal type and mounting geometry ratherā than brand alone; technicians should match the oven’s model tag ā£and part numberā against the element’s specifications ā£before ordering. Verify the element’s nominal voltageā and theā£ number and āorientationā¤ of spade terminalsand compare the length and position of mountingā tabsā because a ācorrect fit ensures even heat distribution and proper sealing ā£ofā the oven cavity.
Replacement installation requires ā¢basic ā£electrical ā£and mechanical checks:ā disconnectā¢ mains power, remove ātheā¤ old element and ā¢compare the replacement for identical terminal spacing and mounting hole ā£alignmentand confirm ā¤continuity with āa multimeter (an open circuit indicates a failed element). During reinstallation, use the original insulating āwashers or grommets,ā¤ secure mounting screws to maintain correct element spacing from the ovenā£ floor,ā and run a ā¢shortā heat-up test ā£atā a moderateā¢ temperature to confirm even heatingā¢ and that control circuits āoperate normally. If the oven exhibits uneven baking afterā£ replacement, verify element straightness, thermostat calibration and that the oven door gasket provides an adequate seal.
- confirm ovenā£ model number and OEMā¢ part cross-reference
- Check voltage rating andā terminal type ā¢(spade vs. screw)
- Measure element length and mounting tab positions
- Test element continuity before and after installation
- Retain insulating hardware āand verify gasket/seal integrity
| Item | Description |
|---|---|
| Part number | 318255006 Frigidaire ā£Oven Range Bake Element (OEM reference) |
| voltage | Nominal 240 V for most full-size electric ranges;ā£ confirmā with oven data plate |
| Terminal type | Two flat āspadeā¤ terminals āaccessible āfromā oven cavity;ā¢ orientation mustā match chassis wiring |
| Mounting | Two screw studs/tabs with insulatingā washers; tab spacing affects fitment and clearance |
| Compatibility | Fits select Frigidaire/Kenmore models – āalways verify against ā£the appliance āmodel number |
Q&A
What āis the 318255006 Frigidaireā Oven Range Bake āElement?
Theā 318255006 isā an OEM replacement bake element usedā in many Frigidaire electric ovens ā¢and ranges.It is indeed the heating element mountedā¤ in the bottom of the oven cavity āthat provides the radiant heatā¢ used forā baking and āroasting. ā¢it’s a direct-replacement part for specific Frigidaire models – always confirm fit ā¢by modelā number orā¢ part diagram before buying.
What are ācommon symptoms that the 318255006ā¢ bake element isā£ failing?
Common signs include: the oven not heating or taking much ā¢longerā£ to reach temperature, uneven cooking or cold spots, visible damage āsuch āas blisters, ābreaksor ā¤burn marksā on the elementor visible sparking when the oven is running. Aā¢ failed element can also cause the ovenā¢ to trip breakers if it shorts ā£to theā¤ chassis.
How do Iā¢ test the 318255006 ā¢bake element with a āmultimeter?
Disconnect āpower toā the āoven first. Access the elementā terminals (usually by removing the oven back panel or inside rear panel) andā¢ disconnect theā wires. Set yourā multimeter to the low ohms range. Place probesā£ on the two ā¢elementā terminals: a healthy element will show āa finiteā resistance (typicalā range for residential elements is roughly 10-50 ohms; such as a 2,500 W ā¢element āat 240 V reads ~23 ohms).An infinite/open ā¤reading means the element is broken. Also test from each terminal to the metal chassis – āthere should ā¢be no continuity (infinite) to ā¢ground;ā continuity ā¢to ā¢groundā£ indicates a shorted element and it should be replaced.
How doā£ I know if 318255006 is compatible withā my Frigidaire oven model?
Check your oven’s āexact āmodel number (usuallyā¤ on āa ālabel inside the door frame or āon the oven frame). Then compare that model to the partā compatibility list provided by āFrigidaire or a trusted āparts distributoror consult the oven’s parts diagram. Pay attention ā£to element length, āmounting ā£bracket ā¤styleand terminalā type – small differences canā£ affect fit andā¢ electrical connection. If unsure, provide the appliance model āto the partsā¤ supplier or technician.
Can I replace the 318255006 bake element myself?ā¢ What are the basic steps?
Yes, manyā DIYers can replace it,ā but always ā¤cut power first ā¢at the breaker. Typical steps: remove ā¤oven racks, remove screws/fasteners ā£securingā the āelement (inside the oven or at ā¤the rear panel), pull the element forward to accessā¢ and note the wiring, disconnect the terminal connectors ā£(use needle-nose pliers), mount ā£the new element, reconnect the wires to theā correct terminals, secure ā¢screws, restore powerā and test the oven at a low temperature. If you’re uncomfortable working ā¢withā mains electricity or the oven’s ā¤wiring, hire a qualifiedā technician.
Canā the bake element be repaired ā¤or cleaned instead of ā¤replaced?
Superficial surface grime ā¢can be cleaned with ānonabrasive cleaners while the element ā¤is coolā – doā¤ not soak or immerse. However, ā¤physical damage ā(broken coil, blistered insulation, damagedā¢ terminals or internal ā¢open circuit) cannot ābeā¤ reliably repaired andā the element should be replaced.Corroded terminal connectors can sometimes be replaced separately if the āelement ābody is otherwise good, butā replacing theā¢ entire element is commonly recommended for safety and longevity.
What safety precautions should Iā take when ā£handling or installingā the 318255006 element?
always disconnect power at the circuit breakerā before workingā on the oven.Allow ā¢the element to coolā entirely.ā Use insulated toolsā and avoid letting wires contact metal surfaces. do not overtighten mounting screws orā damage the element’s ceramic insulators. After installation,verify ā£there ā£are noā shorts by checkingā¢ for continuity to ground and make ā¢a brief functional test at low ā¢temperature while monitoringā¤ for smoke,burning ā¤smells,or sparking. āIf youā detect any unusual ābehavior,cut power and consult a ātechnician.
How long does a bake element ālike the 318255006 typically lastand āwhatā about ā£warranty?
Lifespan varies with usage but many bake elements last ā¢several years to a ādecade. Frequent high-heat use ā¢or physical ā¢damageā£ shortens life. OEM parts such as 318255006 frequently enoughā¤ come with a limited seller or manufacturerā warranty (commonly 90 days to oneā year) – check the seller’s warrantyā terms before purchase. āKeepā proof of purchase and ā¢confirm return/replacementā policies in case the partā isā£ defective on arrival.
To Conclude
The 318255006ā Frigidaire Oven Range Bake Element is a primary heating component āresponsible for generating the consistent, controllable heat required forā baking and roasting. as an OEM-designated element,it playsā¤ a key role in temperatureā uniformity,cooking performance ā¢and overall appliance ā¢efficiency; āa āproperly functioning bake elementā¢ helps theā range achieve ā£intended bake results and āmaintain safe āoperating conditions.
Accurate diagnosis ā£and timely replacement ā£are important when a bake āelement exhibitsā¤ symptoms such ā£as no heat, unevenā heating, visible damage or electrical faults. Verifying the element’s condition using established diagnostic methods, confirming part compatibility with theā¢ specific āFrigidaire modelandā following ā¤manufacturer-recommended safety practices ā£reduce āthe risk of misdiagnosis and āimproper installation. ā¤When there isā uncertainty āor when electrical repairā isā¤ required,engaging a qualified technician āhelps ensure the jobā isā¤ completed safelyā and to specification.
maintaining aā£ functional 318255006 Frigidaireā¢ Oven Range Bake Element supportsā consistent cooking results,appliance reliability ā¤and safety. Properly diagnosing issues and replacing the element when necessary-using the correct part andā procedures-helps restore performanceā¢ and ā£contributes to the long-term serviceability of the oven.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
