The â¤WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit⤠is a replacement electrical interfaceâ assembly used on GE âranges and ovens to connect burner ignition âelectrodes â˘and related wiring to⣠the appliance â˘harness. â˘As a receptacle â¤kit, it provides the physical terminals, insulating âbody and mounting featuresâ necessary âto secure and electrically âisolate the igniter or electrodeâ while maintainingâ a reliable conductive path between the ignition source and the control circuitry.
Functionally, the⤠receptacle kit sits at the burner-to-wiring interface and interacts withâ the ignition module or⣠spark generator,⣠the main control âboard, the wiring harnessand-depending on â¤design-flame-sensing circuits and ground paths. It is indeed exposed to elevated temperatures, vibration and occasional contamination from cooking residues, so its materials âand contact design must maintain â˘low contact⢠resistance⢠and dielectric isolation under thermal stress. âIn practical terms âthe component ensures proper transfer of the ignitionâ pulse⤠or sensing signal⣠to and from the burner electrode, enabling controlledâ spark â¤generation, flame detectionand safe operation of the gas valve and control âŁsystems.
In the article that â¤follows you will findâ a technical overview of the WB17X5113 part: how it functions within ignition and⢠sensing systems, typical appliance models and locations where it is used, common failure symptoms (intermittent ignition, no spark, arcing, visible damage and âincreasedâ resistance), diagnostic checks a technician can perform â(visual inspection, continuity â˘and resistance checks, voltage verification with â¤safe isolation procedures)â and practicalâ considerations for â˘selecting and installing a replacement (correct âŁpart number, heat-resistant connections,⤠secure mounting and postâreplacement verification).The aim is to âprovide the technical context needed for informed troubleshooting and reliable replacement decisions.
Table of Contents
- Function and Role of the⣠Cooktop⤠Burner Receptacle in GE Gas Range Electrical âSystems
- How the WB17X5113 GE Oven Oven Cooktop Burner Receptacle⣠Kitâ Interfaces with the Ignition Module and Wire Harness
- common Failure Symptoms and Diagnostic Procedures â¤for a Faulty Cooktop Burner Receptacle
- Replacement Considerations, Model Compatibilityand Installation Procedures for the WB17X5113 Kit
- Q&A
- in summary
Function and Role âof the Cooktop Burner Receptacle in GE Gas Range Electrical Systems
The cooktop burner receptacle provides the physical⢠and âelectrical interface between â¤a gas range’s wiring harness and the ignition/flame-sensing elements at â¤each burner.â The WB17X5113 GE Oven oven â˘Cooktopâ Burner âReceptacle kit replaces the molded insulator and terminals that deteriorate from heat, vibrationand combustion byproducts, restoring the connector geometry and â˘contact surfaces required⣠for consistent ignition and sensing. âTechnically, the receptacle maintains low-resistance, mechanically retained connections for â¤theâ electrode or thermocouple leads while isolating conductors to prevent shorts; compatibility depends âon matching terminal style, pitch, âand wire â˘gauge to the range harness and burner assembly, so⣠technicians should verify fit against the original part before installation.
- Provides secureâ electricalâ contact⢠for ignition or flame-sensing circuits
- Uses heat-resistant insulation to limit â¤deformation⣠and electrical leakage
- Matches specific terminal spacing and connector types for OEM fit
- Reduces risk of arcing, increased â˘resistanceand intermittent ignition
Inâ operation the receptacle transmits âŁeither⢠the low-voltage sensor signals or the high-voltage ignition pulses generated by the â¤range’s âignition module; thus, degradationâ manifests as intermittent⢠sparking, â¤visible arcing at the connectoror â˘a measurable increase in circuit resistance.â During troubleshooting, inspect the receptacleâ for⣠melted âŁor carbonized insulation,â loose female terminalsor corrosion on âŁcontact⢠surfaces;â a continuity check and a visual inspection under load (with safety precautions) will frequently âenough reveal the fault. â¤When replacing the receptacle, ensure crimped terminals â˘are properly seated and that the replacement matches the original connector’s terminalâ typeâ and âthermal rating to avoid repeat failures.
| Item | Description |
|---|---|
| Terminal type | High-temperature⤠female spadeâ style (OEM-specific pitch) |
| Insulator material | Heat-resistant thermoplastic designed for stove-top environments |
| Typical wire gauge | Commonly â16-18â AWG for ignition and sensor circuits |
| Primary function | Maintain low-resistance, vibration-resistant electrical connection |
How the WB17X5113 GE Oven âOvenâ Cooktop Burner Receptacle Kit Interfaces with the Ignition⤠Module and âŁWire Harness
WB17X5113 GE Oven Oven Cooktop Burner Receptacle â˘Kit is an OEM⣠electrical interface that provides the physical and electrical connection between the â˘burner igniter electrodes, the appliance â˘wire âharnessand â¤the ignition control module.â The receptacle routes⢠both the ignitionâ pulse and⣠the return/flame-sense path so âŁthe ignition module sees the intended load and feedback; correct terminal mapping and insulation geometry reduce the risk of high-voltage leakage or false flame signals. In practice, replacing a damaged connector with this kit preserves terminal polarity and mechanical spacing-avoiding intermittent sparking or moduleâ fault codes that often â˘result from swapped or corroded connections. Technicians use a continuity meter and a visual inspection of terminal seatingâ to confirm the⢠receptacle is⣠transmitting the â¤high-voltage⤠pulse â˘to⤠the igniter and returning the flame-sense signal to the control module before declaring âthe igniter or module faulty.
- Keyed housing to prevent mis-mating of wires
- High-temperature insulation material to resist cooktop heat
- Locking tab and strain⤠relief to⤠maintain consistent contact under vibration
- Terminal design that minimizes arcing and maintains consistent impedance
| Item | Description |
|---|---|
| Ignition feed | High-voltage pulse path â¤from ignition module to igniter⣠electrode |
| flame-sense/return | Low-voltage feedback âor ground return that the module⤠monitors for flame presence |
| Housing/mount | Mechanical retention and thermal protection for terminals |
Electrically, the receptacle functions as â¤a consistent impedance and âcontact interface so the ignition module’s timingâ and sensing algorithms behave predictably; a degraded connector can â¤change âcontact resistance enough to prevent the module from recognizing⢠a accomplished ignition or to trigger a safety⢠lockout. Compatibility is primarilyâ steadfast⢠byâ terminal âŁspacing, housing keying and wire-gauge rating-match the WB17X5113 kit â¤to the originalâ harness and module âto maintain âelectricalâ characteristics. For field troubleshooting, check for discoloration,â loose terminals,â or melted insulation and verify that each terminal passes the relevant âcontinuity and resistance checks; replacing the âŁreceptacle is a âpractical first step before replacing the igniter or control module when connection-related symptoms are present.
Common Failure Symptoms and⣠Diagnostic Procedures for a Faulty Cooktop Burner â¤Receptacle
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle⢠kit âserves as the electrical⤠interface between the â˘cooktop element and â˘the oven’s wiring harness; its function is to provide aâ low-resistance, mechanically secure⤠terminal that withstands thermal cycling and vibration. Failure modes⣠typically include open circuits, increased contactâ resistance, carbonizing or melting â¤at theâ terminal facesand intermittent âcontactâ thatâ can produce arcing. Compatibility is largely mechanical and electrical – the receptacle mustâ match the element terminal â˘shape and the oven harness layout to prevent loose connections. âIn practical âterms, a âfailing receptacle frequentlyâ enough presents after many heat cycles or after a localized heat event where insulation âdeformation⢠or corrosion compromises the metal mating surfaces.
- No heatâ (open circuit) or â¤a burner that works intermittently depending⣠on plug position.
- Visible discoloration, âŁpitting, meltingor degradation of the terminal body or insulation.
- Electrical â˘noise, buzzingor arcing observable â˘at the receptacle under â˘operation.
- High resistance measured across the âreceptacle leading to reduced element power and slow heating.
Disconnect power before any inspection. Diagnostic procedures begin with a visual inspection and proceed to⢠electrical â˘verification: remove the element from the receptacle and check for⢠continuity across⢠the receptacle terminals with a digital⤠multimeter; a healthy contact yields â˘continuity and typically low resistance (single- to low double-digit ohms depending on element wattage), whereas an open or very high reading indicates failure. With the element disconnected, measure supply â¤voltage at the harness to confirm the⣠oven’s hot legs (typically ~240 V across two hot legs on ranges); if supply voltage is present but the receptacle shows⤠open or intermittent continuity, the receptacle or terminal connection is the likely fault. âA wiggle test while monitoring resistance or voltage can reproduce intermittent âŁfailures. Replace theâ receptacle withâ the correct partâ (such as, WB17X5113) when mechanical deformation, corrosionor persistent âŁhighâ resistance is observed to restore reliable electrical contact.
| Item | Description |
|---|---|
| Continuity âtest | Low resistance expected; open circuit indicates failed receptacle or broken âconductor |
| Supply âŁvoltage | Approx. 240 V âacross two hot âlegs on typical⤠ranges; verify with element removed |
| Visual inspection | Look â¤for⣠discoloration, melted insulation, pittingor loose âterminals |
Replacementâ considerations, Model Compatibilityand Installation Procedures for the WB17X5113 kit
WB17X5113 GE Oven Oven Cooktop â¤Burner Receptacle Kit is a replacement â˘receptacle assembly intendedâ to restore the mechanical retention âŁand insulated electrical connection between âa surface heating element and the âcooktop wiring harness. The receptacle houses⣠the spade/terminal contacts and mounting flange that âlocateâ the element on the cooktop, so correct terminalâ count, âtab spacing and mounting hole alignment are âŁessential⢠forâ compatibility.Technically, failure modes that indicate the receptacle needs replacement include intermittent element heating,⤠visibleâ carboning or melting of the â¤plastic housing, loose push-on terminalsor arcing at the connection;⤠these symptoms arise from increased contact resistance, oxidation of contactsor degraded insulating material under repeated thermal⣠cycling.
- Confirm part â˘fit: match terminal count/spacing and mounting âŁtab locations to âthe âexistingâ element and cooktop.
- Isolate power â˘at the breaker before removing the element and receptacle.
- Inspect⣠wire insulation âand replace frayed leads;â ensure wire⤠gauge matches appliance specifications.
- Reinstall receptacle so⣠terminals fully seat on element tabs⤠and the bracket secures to the cooktop to prevent movement.
- After reassembly,⤠verify âcontinuity and perform a low-power functional test to check for arcing or overheating.
| item | Description |
|---|---|
| Function | Provides insulated terminal housing and mountingâ bracket for surface heating element connections. |
| Terminalâ configuration | Designed to⣠accept standard snap-on element terminals; confirm⢠2- or 3-terminal element compatibility before ordering. |
| Material considerations | Heat-resistant thermoplastic body âŁwithâ stamped copper or â¤nickel-plated contacts; replace if housing is degraded âŁor contacts show âcorrosion. |
During installation, align the receptacle so the element tabs are fully engaged and the mounting flange sits flush with⣠the cooktop; loose mechanical retention⢠increases contact resistance and accelerates failure.Use a multimeter to confirm correct â˘continuity between element terminals and the harness before restoring powerand visually inspect for proper âclearance from nearby heated surfaces âand from vent openings.â For â¤practical compatibility checks,compare the replacement kit’s terminal spacing and bracket footprint âagainst the original⤠part or service manual diagrams-on some GE ranges the same element âŁtype is used âacrossâ several models â¤but with different mounting orientations,so â¤minor bracket repositioning or use of the supplied spacer may be required to⢠achieve aâ secure,heat-resistant installation.
Q&A
What is âtheâ WB17X5113⢠and what does it do?
The WB17X5113⢠is an OEM âGE â˘replacement burner receptacle (terminal/harness connector) used on electric ranges/cooktops. It⢠provides the electrical connection between the cooktop surface element (coil or smooth-top â˘element terminal)â and⣠the âoven/cooktop wiring harness, allowing the⢠element to receive âpower from â¤the range.
How âdo I âŁknow if the WB17X5113 needs to be replaced?
Common signs include one or more surface burners not heating or heating intermittently,â visible â¤burn âmarks or â¤melting on the connector,⣠loose or wobbly element â˘fit, sparking/arcing at the element connectionor a bad/charred smell near the âŁterminal area. If âŁthe connector âŁshows corrosion, deformation, discoloration from heat, âŁor a poor electrical connection, replacement is recommended.
Is the WB17X5113 âcompatible âŁwith my GE range or cooktop model?
Compatibilityâ depends on the exact GE/Hotpoint/RCA model. âWB17X5113 is an â¤OEM part number used on many GE-built electric cooktops and⤠ranges, but you should confirm compatibility by⢠checking yoru appliance model number against the part listing (parts diagrams, owner’s manualor the retailer’s compatibility lookup). If in doubt, provide your appliance model âŁnumber to the parts supplier or technician.
Can I â˘replace the â˘WB17X5113 myself or do I need a⣠technician?
Many competent DIYers can replace this part because replacement â¤typicallyâ involves disconnecting power, âŁremoving the element⣠or cooktop access panel, â¤and swapping the connector. However, you⤠must be cozy working safely around live circuitsâ (you should not work⣠with power on)and able to reassemble the cooktop correctly. âIf you are unsure,uncomfortable âwith electrical work,or theâ cooktop has additionalâ damage,hire a qualified â¤appliance technician.
What â˘are the basicâ safety âsteps for âreplacing this receptacle?
1) Disconnectâ power at the circuit⢠breaker (do not rely on surface controls alone). 2) Verify⤠power is offâ with a multimeter. 3) Allow components â¤to cool.⣠4)â Remove only the panels/parts necessary to access the connector. 5) â¤Note orâ photograph wiring locations âbefore disconnecting. 6) âŁReplace the receptacle with the correct OEM part âand secure⢠connections properly. 7) Reassemble and restore âpower,then test. â¤Never work⢠on the âŁappliance with power applied unless you are trained and using proper tools âŁand PPE.
How do I test the connector and element to be â˘sure the âproblem is fixed?
With the new receptacle installed and the appliance reassembled enough for safe âtesting, restore power and turn the burner on to verify it heats â¤evenly and there is â¤no sparking orâ burning smell. If you prefer electrical tests: with the element disconnected, check element continuity with a âmultimeter (resistance shouldâ be â¤within⤠the âelement’s spec) and check for no short to chassis. To test the â˘harness/terminal voltage, only measure with power on and appropriate precautions-if youâ are not trained, have⤠a technician âŁperform live-voltage checks.
Can I use an aftermarket or worldwide receptacle instead âof the WB17X5113?
You âcan sometimes use a⣠compatible aftermarket or⤠universal connector, but OEM parts⢠like WB17X5113 âare recommended because they match the original terminals, fitand heat rating. If you choose an aftermarket part, ensure it is rated for the same temperature and amperage, matches the terminal layoutand provides a secure, low-resistance⣠connection to avoid overheating and arcing.
Where can I buy the WB17X5113 and how much does â˘it typically cost?
WB17X5113 is â¤sold âthrough authorized GE â˘parts dealers, appliance parts websitesand some local appliance repair âshops. Prices⤠vary by⤠seller and â˘region but are generally âinexpensive⣠relative to othre âŁappliance components (often under $50 retail). Always verify the part number against your appliance model before purchasing.
In Conclusion
The WB17X5113 GE oven cooktop burner receptacle kit serves as the electrical and mechanical interface â¤betweenâ the cooktop burner and the ârange⤠wiring, providing a secure, heat-resistant connection that enables⢠consistent heating andâ safe operation. As a small but âŁcritical component, the receptacle supportsâ reliableâ current transfer, âŁhelps prevent arcing and intermittent contactand contributesâ to overall cooktop âperformance and longevity.
Timely and âŁaccurate diagnosis is important when burners exhibit intermittent heating,⢠failure to ignite, visible discolorationor âsigns of melting or arcing. Confirming the receptacle âas the source of âthe problem-using visual⤠inspection and appropriate⤠testing-helps avoid unnecessary parts replacement. When replacement is required, installing the correct WB17X5113 kit restores proper function and reduces the risk of electrical hazards or further appliance damage.
For safety and â˘durability, power â¤should be disconnected before inspection or serviceand installationâ should follow the appliance manufacturer’s âinstructions â¤or be performed by⣠a qualified service technician.Using âŁthe proper OEM replacement part and ensuring correct installation provides⣠a cost-effective solution to restore performance and maintain safe operation ofâ the cooktop.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
