316272000 Frigidaireâ Igniter and Orifice Holder is a combined ignition and gas delivery mounting component used on Frigidaire gas cooking appliances.As⢠a mechanical assembly it secures â˘the⣠gas âorifice in âthe correct â¤position relative to the burnerâ and holds the igniterâ element and its⤠electrical terminals, providing âthe physical âŁalignment and basic mechanical support required for reliable ignition.
Inside the appliance the part interfaces directly with the burner, the gas⤠valve/orificeand the appliance’s ignition wiring and control circuitry. By maintaining a fixed gap and orientation between the orifice and the igniter, it affects⤠gas flow geometry and flame stability; electrically it provides the connection point for the⤠igniter so that the control module can deliver the appropriate voltage or current forâ spark or hot-surface ignition. Proper sealing⢠and mountingâ of the orifice holder âalso help⢠prevent gas leakage and ensure consistentâ combustionâ across the burner ports.
In the following article readers will find a technical description of the part’s function and design, guidance on model compatibility and fitment, common failure symptoms to watch for (such as, no ignition, delayed ignition, intermittent operation, â˘or gas âsmell), systematic troubleshooting â˘steps toâ isolate electrical or gas-flow issuesand practical â¤considerations for safe replacement and reassembly. The details is presented âŁfor âtechnicians, engineersand appliance owners who need⢠to diagnose, serviceor replace the component while observing appropriate safety precautions (shutting⤠off gas and power, checking for â¤leaks,â and verifying correct operation after installation).
Table of Contents
- Function â˘and Role of the Igniter and Orifice Holder in Frigidaire Gas Burner Operation
- How the 316272000 Frigidaire Igniter and Orifice Holder Worksâ Inside the Appliance: Electrical, Mechanical and GasâFlow Interactions
- Common Failure Symptoms and Diagnostic Indicators for âŁthe â¤Igniter andâ Orifice âHolder Assembly
- Compatibility, Replacement Considerationsandâ Installation Procedures for Service Technicians
- Q&A
- In Retrospect
Function and Role⤠of the Igniter and Orifice Holder in Frigidaire Gas Burner Operation
The⤠316272000 Frigidaire Igniter and Orifice Holder combines two linked functions at the burner: the igniter creates the high-voltage spark that initiates combustion, âwhile the orifice holder secures and aligns âthe metering orifice that controlsâ gas flow into the burner port. In operation, the igniter electrode must be positioned and grounded correctly ârelative to the burner head soâ the spark reliably bridges to ionize the gasand the orifice⤠holder must maintain the orifice’s axial position and seal against the valve outlet to preserve intended â˘flow characteristics. Compatibility is âmechanical âand electrical-correct mounting, electrode gap, âŁand connector type determine whether this assembly will perform as expected â¤on a âŁgiven Frigidaire gas burner model.
- Primary functions: â¤spark generation â¤by the igniter; gas metering and alignmentâ by the orifice â˘holder.
- Common failure symptoms: repeated clicking with no⢠ignition, âweakâ or sooty/ yellow flameor intermittent flame loss due to a loose holder or fouled electrode.
- Diagnostic checks: verify electrode gap and insulation, confirm orifice seating and absence of debrisand inspectâ mounting for proper alignment and grounding.
Technically, the igniter and orifice holder â˘interact to set the initial conditions for stable â˘combustion: the igniter’s high-voltage pulse must occur when the orifice is delivering⣠the properâ pressure/flow âŁand the burner air/fuel⣠mixture is within the combustible range. âSmall âmisalignments of the orifice holder change jet directionâ and effective flow area, which alters flame shape, heat distributionand⤠ignition reliability. For⢠service, technicians typically inspect the electrode tip for â¤erosion â˘or carbon build-up,⤠ensure a consistent â¤electrode-to-burner gap â(commonly a few millimeters),⤠and confirm âŁthe orifice is indexed and tightened â˘to prevent leaksâ or flow distortion; replacing theâ assembly with theâ specified⣠316272000 âŁunit â¤preserves⣠original alignment and fit when those parameters are out of tolerance.
| Item | Description |
|---|---|
| Igniter | electrode assembly that produces⢠the ignition â¤spark; failure modes âinclude cracked⤠ceramic, worn tipor poor grounding. |
| Orifice Holder | Mounting and alignment component forâ the metering orifice; secures âflowâ path and maintains correct jet orientationâ and seal. |
How the 316272000â Frigidaire Igniter and Orifice holder Works Inside the appliance: Electrical, Mechanical and GasâFlow Interactions
the 316272000 Frigidaireâ Igniter and Orifice Holder is a combined mechanical and electrical subassembly that positionsâ the gas orifice and ignition electrode so the control valve, âgas flow, âand spark interact reliably at the burner. Electrically, the cooktop⢠control sends high-voltage pulses to the electrode tip; the insulator and mounting bracket must provide a clean, low-leakage path so the voltage appears âŁacross theâ electrode gap ratherâ than shorting to chassis ground. Mechanically, the⣠holder locates âthe orifice relative to the burner tube and seals the gas â¤passage with a â˘threaded seat or Oâring;⢠correct alignment ensures the gasâ jet intersects the electrode spark at the proper distance for prompt ignition. In practice, technicians â˘must match âthe âholder orientation, mounting tab locationand orifice sizing to the specific Frigidaire model and fuel âtype (naturalâ gas vs. LP) because small changes in orifice diameter or electrode positionâ produce measurable differences in flame stability â˘and ignition timing.
The interactions⢠among electrical, mechanicaland âgas-flow elements determine symptom patterns and diagnostic checks: a cracked insulator or damaged electrode will produce weak or⤠absent sparks, a partially blocked âŁorifice causes delayed ignition and yellowing of theâ flameand âan improperlyâ seated holder can allow gas leakage â¤or flashback. Useful troubleshooting steps include visual spark verification,continuity/resistance checks onâ the igniter circuit,inspection of the orifice for debris,and verifying that the control valve opens prior to or concurrently with⤠sparking. replacement parts âshould preserve the original orifice size⤠and mounting geometry â˘to maintain fuel delivery and safety; for example, swapping to an incorrect orifice can cause âlean/rich combustion, requiring adjustment or part re-selectionâ to restore correct flame âcharacteristics.
- Common technician checks: â˘spark âvisibility, electrode insulation integrityorifice cleanliness,⤠valve timingand secure mechanical seating.
- Symptoms of failure: no ignition, delayed ignition, weak/sooty flame, gas odor near the burner.
| Item | Description |
|---|---|
| Orifice function | Fixed restriction that meters gas flow⣠to the burner and determines jet velocity relative to the electrode⢠gap. |
Common Failure Symptoms and Diagnostic Indicators forâ the Igniter and â¤Orifice Holder Assembly
The 316272000 Frigidaireâ Igniter and Orifice Holderâ combines the ignition element and the gas orifice mounting into â˘a single serviceable assembly thatâ both initiates combustion âŁand sets âthe gas flow geometry⣠for⢠aâ specific burner.In â¤the assembly used on many Frigidaire gas ranges and ovens theâ igniter⢠must present either a reliable hot surface or consistent spark at the proper location while the orifice â˘holder secures and aligns the orifice so the⤠flame pattern is stable and repeatable.Mechanical fit, correct seating of the orificeand uncompromised electrical continuity are⢠all required âfor predictable burner behaviour and proper heat output.
Typical failure symptoms are often diagnostic: repeated sparking without lighting,⢠long ignition delays, a weak or yellow-tinged âflame, visible cracking or blackening of the igniteror a complete open circuit in electrical tests. Troubleshooting begins with a âvisual inspection âfor⤠deposits, broken ceramic or bent mounting âŁthat disturbs the orifice position, âfollowed by⤠electrical checks (continuity/resistance and applied voltage⢠at the connector) and a â˘flame observation test under controlled operation. For example, a steady glowing igniter that does not light the gas indicates either insufficient applied gas pressure, an obstructed orificeor a degraded âŁigniter current; a clicking spark âwith no⤠gas flow suggests an orifice blockage or valve issue rather than an igniter⢠fault.
- Repeated clicking or continuous sparking without ignition – check orifice alignment and gas valve operation.
- Delayed ignition or ignition noise -â measure â¤igniter resistance/continuity and supply voltage during a call for heat.
- Weak,lifting,or yellow flame – inspect orifice for partial blockage or incorrect seating.
- Visible damage to igniter element or holder – replace assembly to restore proper positioning and electrical integrity.
| Item | Description |
|---|---|
| Continuity check | Multimeter should show continuity âacross the igniter; an open circuit indicates a failed element. |
| Visual/flame indicator | Steady blue flame centered at burner port â˘indicates proper âorifice alignment; yellow or â¤lifting flame âsuggests obstruction or misalignment. |
Compatibility, Replacement Considerationsand Installation procedures for Service Technicians
The 316272000 Frigidaire Igniter and Orifice Holder is an integrated assembly that positions the gas orifice relative⤠to the ignition⢠source and secures the igniter element in the âŁburnerâ throat. Its mechanical relationship to the burner ports and electrical connection determine ignition timing and flame â˘stability: if the orifice is misaligned or the igniter element âŁis âcracked or degraded,ignition may be delayed,the flame may lift or âsputter,or âŁthe oven safety sensor can register improper combustion. Technicians should confirm the â˘OEM part number andâ verify âŁphysical fit against the appliance’s⢠burner geometry and mounting points; the âŁassembly is intended for specific Frigidaire gas range and oven families, âso compatibility checks include matching mounting hole spacingorifice thread/seat typeand electrical connector style before installation.
- Safety first: shut off gas and power before disassembly.
- Confirm part number and compare orientation and gasket/seal areas to the original.
- Inspect the igniter for cracks and the âŁorifice for debris or deformation prior to installation.
- After installation, perform an ignition⢠sequence check and⣠a gas-leak test at the orifice/connection.
Replacement procedure for technicians emphasizes controlled access and measured verification⢠rather than force-fitting: remove access panels to expose the burner assembly, loosen retaining fasteners, note the exact orientation⣠of the holder and any heat⢠shields, thenâ remove the old assembly while protecting the igniter element and wiring harness.Reinstall â¤using the original mounting orientation and torque values providedâ in⣠theâ service manual or equivalent âspecifications, reconnect the electrical lead with correctâ polarity and â˘secure strain relief, then restore gas and electrical supply for functionalâ checks -⢠confirm consistent spark or glow, observe steady flame pattern across all simmer â˘and high settings, âŁand perform a soap or electronic leak test⤠at the orifice connection. If ignition irregularities persist⣠after âreplacement, verify voltage at the igniter during the trial cycle and inspect upstream gas â¤pressure and valve operation as part of fault⣠isolation.
| Item | Description |
|---|---|
| Part number | 316272000 – igniter andâ orifice holder assembly |
| Function | Positions orifice relative to igniter and secures the ignition âelement to the burner |
| Typical symptoms | Delayed âŁignition, weak or unstableâ flame, gasâ odor at⢠burner |
| Recommended checks | Physical fit, electrical continuity, ignition current/voltage per service âmanualorientationand âleak test |
Q&A
What⤠is the 316272000 Frigidaire igniterâ and orifice holder and what does it do?
The 316272000 is an igniterâ and orifice holder assembly used on certain frigidaire gas ranges and cooktops. The orifice holder locates the gas orifice (jet) that meters⢠fuel to⢠a burnerâ while the igniter (sparkâ electrode) generates the high-voltage spark to ignite the gas. Together they control and light the burnerâ safely and consistently.
How do I know if the igniter/orifice holder is âŁthe â˘problem when âa burner won’t light?
Common signs include: continuous clicking with no⣠flame, visible spark at the electrode but noâ ignition (suggesting a blocked orifice), no⤠spark at all (suggestingâ a failed âelectrode or wiring)or a weak/uneven â¤flame (which can indicate a partially clogged orifice or wrong orifice size). always check power and⢠gas supply first. Visual inspection for cracked ceramic, loose wiresorâ debris at theâ orifice is useful⣠initial troubleshooting.
Can I test the igniter with a multimeter?
You⢠can check wiring continuity to the igniter with a multimeter; âan open circuit usually indicates a failed â˘electrode. âThough, spark âelectrodes⤠are high-voltage devices and⢠do not show a simple low resistance like heating elements, so a passed continuity check does not always guarantee a working spark.The most reliable test is to observe a spark when the burner knob is turned (with gas off or briefly on and standing back) or to use a qualified technician’s diagnosticâ tools.â Always shut off power and gas before disconnecting parts.
How do I clean or clear⢠a clogged orifice safely?
Turn off the gas supply and remove the⣠burner cap and head to access the orifice holder. Use a soft brush or compressed air to remove loose debris; do not use wire or needles that can enlarge or damage âthe orifice hole. If the orificeâ itself is clogged, replace it ârather than trying to enlarge the hole. Reassemble carefully and restore gas.â If you smell gas at any time, stop andâ ventilate the area; call a professional.
Do I need different orifices forâ natural gas and propane (LP)?
Yes. Natural gas âŁand propane require different orifice sizes because âof different fuel pressures and densities. The 316272000 assembly may be supplied/configured for one fuel type only. When replacing the part or converting the appliance, confirm the correct orifice âsize and follow the manufacturer’s conversion instructions or have a qualified⢠technician perform the â˘conversion.
Is âŁtheâ 316272000 an OEM part or are aftermarket replacements OK?
The 316272000 is âan OEM Frigidaire part number.â OEM parts are recommended for fit and function, especially for gas components where correct orifice size and electrodeâ placement matter. âŁQuality aftermarket parts can work, but verify part compatibility âwith your exact appliance model and prefer partsâ that listâ the⤠same⤠specifications as the OEM.
How difficult is it to replace the igniter and⢠orifice holder myself?
For someone comfortable with⤠basic appliance repairs, replacing⢠the assembly isâ typically âmoderate in difficulty: it requires shutting offâ gas and power, removing the burner head and caps, disconnecting a wire harness âor terminaland⢠unscrewing the old orifice holder. Allow 30-60 minutes. As this involves gas fittings and ignition safety, if you are notâ confident or detectâ gas leaks, hireâ a qualified technician.
After replacement I still have problems – what should I check next?
Verify correct part number and orifice type for your fuel,â ensure⤠the âelectrode tip is correctly positioned and not cracked, check that wiring and grounding are secure, confirm the burner head and cap areâ seated properlyand⢠inspect the âŁmanifold valve for proper gas flow. If âthe igniter sparks but the burner does not light,â the orifice might potentially be blocked or the gas valve may not be delivering fuel. If unsure, stop and call a licensed âŁappliance technician to avoid safety â˘hazards.
In Retrospect
The 316272000 Frigidaire Igniter and Orifice Holderâ is a critical component⣠in gas cooking appliances, combining the ignition element⤠with the orifice positioningâ mechanism to ensure reliable flame initiation and correct fuel delivery. Proper functioning of this assemblyâ supports consistent burner performance, efficient combustion, â˘and overall applianceâ safety by âŁhelping to produce a stable, correctly sized flame and preventing irregular gas flow or ignition failures.
Becauseâ ignition and orifice issues can present with similar symptoms-delayed lighting, weak â˘flameor recurring misfires-accurate diagnosis is essential before replacing the part.visual inspection, continuity testing of the igniterand verification of correctâ orifice alignment can help identify whether the 316272000 assembly is the source of âthe âproblem. When replacement âis warranted, using the manufacturer-specified part⣠and following recommended installation procedures (or engaging a qualified service technician) helps maintain fit, function, âand safety standards.
the 316272000 Frigidaire Igniter⤠and Orifice Holder plays an vital role in burner performance and appliance safety. âŁThoughtful diagnosis, appropriate replacement withâ the correct⢠part,⢠and adherence to safety and âinstallation guidelines will âhelp restore reliable operation, reduce the risk of recurring issuesand preserve⣠the long-term performance of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
