WB17X5113 â˘GE Oven Oven⢠Cooktop Burnerâ Receptacle Kit is a â¤factory-designated replacementâ receptacle assembly used on âGE ranges and cooktops to provide⢠the mechanical and â˘electrical interface betweenâ the appliance wiring and a surface heatingâ element or burner. The kit typically consists â˘of an insulated âŁreceptacle body,⢠metal contact inserts or spade â˘terminalsand mounting â¤hardware; its primaryâ role is to accept the element plug and maintain a secure,⤠heat-resistant electrical connection under normal cookingâ conditions.
inside the appliance the receptacle functionsâ as a junction point âin the cooktopâ electrical âcircuit,⢠carrying line and â¤neutral (or two hot⣠legs on 240 V appliances) to the âheating âelement⢠and interfacing with control devices such⢠as infinite⢠switches, relays, âor thermal âŁsafety components.⤠It is installed âin⤠the cooktop cavity or under the⢠range â˘top and must withstandâ elevated temperatures, vibrationand current load without âŁdegrading. As part âof⤠the appliance’sâ power-delivery path, the receptacle’s âcontact integrity, insulationand mounting stability directly affect â¤element⤠performance, electrical safetyand the likelihood of arcing or intermittent operation.
In this â˘article readers will âfind a focused âtechnicalâ overview of the WB17X5113 receptacle kit,including its intended function,model⣠compatibilityâ considerations,common â˘failure symptoms âŁ(loose âŁcontacts,overheating,discoloration,intermittent element⢠operation),diagnostic checks a technician canâ perform,and practical replacement considerations such⤠as correct⢠part⢠identification,safe âpowerâ isolation,inspection â˘of mating element⣠terminals,and verification of secure electrical connections after installation.
Table of Contents
- Function and âRole âŁof the⢠Cooktop âBurner Receptacle âin Ovenâ Electrical⣠Systems
- Howâ the âWB17X5113 GE Oven Oven âCooktop Burner Receptacle Kit Interfaces With Wiring â˘Harnesses, Switchesand Ignition Circuits
- Common Failure Symptoms⤠and Electrical Diagnostic Indicators âfor a Faulty cooktop Burner âReceptacle
- Compatibility by Model, Replacementâ and Installation âConsiderationsandâ Stepwise âTroubleshooting Procedures
- Q&A
- In Summary
Function andâ Role of âŁthe Cooktop Burner Receptacle in âOven Electrical Systems
The WB17X5113 GE Ovenâ Oven âCooktop â¤Burner âReceptacle Kit serves as the electrical interface âŁbetween âa cooktop burner or spark electrode âassemblyâ and theâ appliance⤠wiring harness. This⤠molded receptacleâ provides the mechanical âŁretention and conductive paths required forâ spark âignition â¤pulses, standing pilot or surfaceâ element âfeedand sensor/thermostat â¤connections; its high-temperature plastics and plated contacts areâ chosen to âpreserve electrical â˘continuity under⤠repeated thermal⣠cycling. As an OEM-style replacement,the kit matches the original pinâ configuration and mounting points so technicians can restore correct pin mapping âand secure mating with ignition modules,valves,or element terminals without rewiring mods.
In operation the receptacle â˘behaves as a low-impedance⤠contact block: worn orâ corroded contacts introduce resistance⤠that âcan cause â˘weak or intermittent âsparks, arcingor loss of power to âan element. Common practical âdiagnostics include visual inspection âfor melted insulation⢠or oxidized pins,continuity checks⣠with a multimeter across⤠the mating âŁpins,and verifying fitment âagainst the oven’s wiring diagram; replacing the receptacle âŁtypically⣠resolves issues where the harness and âmodule are known-good. Use⢠the correct âOEM kit to ensure⣠compatible pinout and⤠thermal ratings; disconnect line power âŁbefore servicingâ and confirmâ secure âretention to prevent⢠vibration-related loosening.
- Electrical âcontact âŁfor â¤spark and âŁelement circuits
- Mechanical retention and correct pin alignment
- High-temperature insulation and⣠platedâ contacts
- Compatibility with OEM â¤wiring harness âŁand ignition modules
| Item | Description |
|---|---|
| function | Provides âsecure conductive⢠interface⤠for⤠burner ignitionâ and element/sensor⣠connections |
| Materials | Molded high-temp plastic âbody with âplated metal contacts |
| Failure symptoms | Intermittent ignition, arcing, increased⢠resistance, visible melting⢠or âcorrosion |
How the WB17X5113 âGE Oven Oven Cooktop â˘Burner Receptacle â˘Kit Interfaces With Wiring Harnesses,â Switchesand Ignition⤠Circuits
The⢠WB17X5113 GE Oven Ovenâ Cooktopâ Burner Receptacle Kit is a multiâterminal â¤connector⣠assembly that electrically and mechanically joins⣠the appliance wiring⢠harness to each burner â˘section,â switchesand the ignition circuit. The receptacle routes â˘line â˘and neutral conductors, the switchedâ output fromâ the infinite orâ selector âswitch, the â¤ignitor ledand âchassis⢠ground through⤠a keyed plastic housing withâ stamped metal terminals, so thatâ when a switch closes the appropriate⣠terminal is connected to mains and when it opens theâ circuit is isolated. In practice this means the part carries both âthe highâpower supply âfor surface elementsâ (model⣠dependent 120/240â V)⢠and the lowâlevel ignition â˘pulse or continuous ignitor feed, while providing a single âŁserviceable interface⣠for replacement⤠or diagnostics.
- Common⤠terminals: hot line(s), switched element âŁoutput, ignitor/ion sensor leadandâ ground.
| Item | Description |
|---|---|
| Voltage â˘rating | Carries â˘appliance âmains (120/240 V âdepending on model) â˘and ignition âcircuitry |
| Wire â˘gauge | Typically accommodates 14-18 AWG⢠forâ power and control leads |
| Connector style | insulated âŁmultiâpin receptacle with⣠keyed housing and âcrimped terminals |
Technicians use the receptacle as âa test â¤point when⢠diagnosing âŁburnerâ faults: verify continuity across the switch âoutput and element terminal with the switch âin the ON â˘position, confirmâ presence â¤of mains voltage at âthe incoming line pinsandâ check for pulsed voltage on the ignitor terminal⣠during spark âŁattempts. When replacingâ the WB17X5113 â¤GE⢠Oven Ovenâ Cooktop Burner Receptacle Kit or âmating harness, match the housing shape and terminal âarrangement to the OEM harness to avoid miswiring; ensure crimps âare fullyâ seated and theâ locking clip isâ engaged to prevent intermittent connections and arcing underâ load. For safe service, isolate power before disconnecting the receptacle and reconfirm⤠connection integrity after reassembly.
Common Failure Symptoms⣠andâ Electricalâ Diagnostic Indicators for a Faulty Cooktop Burner Receptacle
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit functions as the electrical interface⣠between a cooktop âŁelement lead and⢠the applianceâ wiring harness; its design⤠provides âthe⣠conductive path, mechanical retention âof the element plugand thermal⤠resistance neededâ in the cooktop habitat. When this⤠receptacle âdegrades due to âloosened terminals, corrosion, â¤or heat-inducedâ deformation, âthe electrical behavior âchangesâ fromâ a low-resistance, âstableâ connection to intermittent contact, increased contact resistanceor arcing.Aâ technician will commonly⢠detect⢠these âfailures âŁthrough âvisual signs-melted plastic, discolored terminals, â˘or pitting-and with electrical âchecks:â lack of continuity through âthe connector⢠with⤠power removed,â notable â¤voltage â˘drop measured across âthe receptacle⣠under loador visible sparking during operation when the âcontrol is energized.
- Burner does not heat orâ heatsâ inconsistently
- arcing or visible sparks at the âterminal when âŁthe burner âis â˘engaged
- Burner only works when element plug isâ manipulated (intermittent⤠contact)
- Discolored, â˘cracked,â or âmelted âreceptacle housing
| Item | Description |
|---|---|
| No heat at burner | Measure â˘line voltage at the receptacle with control on; â¤absence of voltage indicatesâ upstream wiring or switch issue, presence â¤of voltageâ with no element heating points âŁto open âelement. |
| Intermittent heating or arcing | Continuity test with power off and âŁa wiggle test under âcontrolled conditions; intermittent⤠contact or increased resistance suggests worn â¤terminalsâ or⢠poor retention. |
| Visible damage | Replace the âreceptacle if housing deformation, meltingorâ terminal â˘corrosion is âpresent, as these âindicate compromised⣠insulation and contact integrity. |
For practical diagnostics, disconnectâ power before performing continuity checks and âthen verify terminal-to-wire â¤continuity⤠and low resistance across the connector âŁbody; acceptable results are near-zero ohms âŁfor the⤠connector itself, while element resistance willâ be higher âand âspecific to the part. Under powered âconditions⣠a â˘controlled voltage check⢠at âthe receptacle while the control is calling for⣠heat⢠will⢠reveal voltage presence⣠and potential voltage drop âŁunderâ load-a significant drop across the⢠receptacle indicates âhigh contact resistance and warrants⣠replacement. in manny field cases, intermittent⣠failures that resolve whenâ the element plug is⣠reseated âpoint⢠to worn â¤retention tabs or loosened âscrew terminals, so â˘confirming â¤mechanical fit and inspecting âthe mating surfaces is as important⢠as the⢠electrical measurements.
Compatibility by Model, Replacement and Installation Considerations, âand âStepwise Troubleshooting Procedures
The WB17X5113 GE Oven â¤Oven Cooktop Burner⢠receptacle Kit is â¤a âŁdirect electrical interface âthat secures the cooktop â˘element’s terminal to the âappliance wiring harness and provides a heatâresistant mechanical âmounting point. In service,⤠the receptacle carries⢠the full branchâcircuit current for the affected heating â˘element and mustâ maintainâ low contact âresistance under thermal⤠cycling; failures typically present as intermittent âheating,â arcing at âŁthe terminal, visible melting or discolorationor a blown element. Technicians â¤should inspect the⢠mating surfaces for pitting⤠or âdeformation and confirm the replacement receptacle matches the original⤠terminal spacing and âconnector â˘style to ensure reliable contact and safe current flow.
Replacement requires âverifying model compatibility and âfollowing safe electrical practices: disconnect power at the âbreaker, confirm the cooktopâ is âcooland âdocument connector orientation⢠before removal. Check⤠conductorâ sizeâ and terminal type-loose or âundersized conductors can cause heating even with a new receptacle-and use a multimeter toâ verify continuity⢠and âabsence⢠of shorted insulation⤠beforeâ reassembly. The troubleshooting approach is stepwise: begin with a â˘visual and mechanicalâ inspection, measure continuity â˘and resistance of the element and receptacle under cool conditions, replace the receptacle if you find high resistance or physical âdamageandâ reâtest under loadâ after reassembly to confirm the symptom is â¤resolved.
- Visually inspect terminals âfor melt, pittingor discoloration; â¤remove⤠and test element and receptacle continuityâ if suspicious.
- Disconnectâ power,⤠then verify conductor gauge and connector type match the replacement; reinstall with firm, fully seated connections.
- Use⢠a multimeter â˘to â¤measure element⤠resistance and terminal contact resistance; significant⣠increases indicate a failing receptacle or âpoor connection.
- After replacement, perform a functional test at operating temperature and recheck connections⣠for overheatingâ signs.
| Item | Description |
|---|---|
| Request | Replaces âŁthe âŁfactory cooktop âŁburner receptacle on compatible GE ovensâ and ranges; confirm âexact model fit using the appliance parts list⤠or service manual. |
| Materials/Construction | Heatâresistant insulating body with⢠stamped metal terminals âdesigned for repeated thermal cycling and⢠secure connector retention. |
| Common Fault Indicators | Intermittent element operation, visible âterminal damage, arcing noiseor elevated âcontact resistance âmeasured with a multimeter. |
Q&A
Whatâ is the WB17X5113 cooktop burner âreceptacle âkit and âwhat does it do?
The WB17X5113 is a replacementâ receptacle kit for âGE electric ranges with coil-style surface âŁburners. It provides â˘the socket/terminal connection that⤠the coil element plugs into and routes â˘power⤠from theâ range wiring and infiniteâ switches âto the element. In âshort, itâ is indeed âthe physical connector that lets the heating element receive electricity.
How do I know if the WB17X5113 receptacle⤠is bad?
Common⣠symptoms⣠of a âŁfailing â¤receptacle include a burnerâ thatâ won’t heat, â¤intermittentâ heating, arcing or sparking at âthe element â¤connection, â¤visible burning or melting of the receptacleor a loose-fittingâ coil element. Visually inspect âfor discoloration, melted âplasticor broken terminals. always disconnect power before inspecting.
Is the WB17X5113 compatible âŁwith all GE cooktops?
No. Theâ WB17X5113 âŁis designed for specific GE⣠ranges â¤thatâ use âŁcoil-style (open) surface elements. â˘It is not used on â¤smooth-top (glass) radiant elements or âinduction cooktops.Always confirm compatibility by âmatchingâ the âpart number⣠to your rangeâ model number or⤠by checking the OEM parts diagram for your specific appliance model.
Can â¤I replace the WB17X5113 âŁmyselfand what âsafety steps should I follow?
Yes, a competent DIYer can replace it, but âyou âŁmust follow safety â˘precautions: disconnect the range from âŁpower at the⣠circuit⢠breaker (do not rely on a surface control only), âŁand if it’s a gas range, ensure controls areâ off and take appropriate gas safety steps if working nearâ the â˘oven.â Remove âŁthe cooktop or access⢠panel per your âmodel’s âservice instructions,⢠note wireâ locations or âŁtake â¤photos, then swap the old receptacle for the new one. If you⣠are⣠not âpleasantâ with electrical work, hire a âqualified appliance technician.
What tools are âneeded to⢠replace the WB17X5113 and how long does⤠replacement usually take?
Typical â˘tools: flat and Phillipsâ screwdrivers,â nut driver⤠set (commonly 1/4â or 5/16â),â needle-nose pliers,⤠and a multimeter for testing. Replacement⤠time varies â¤by range design âbut âis often 20-45 minutes âŁfor someone experienced.⤠Time âincludes removing the cooktop âor lift-up panel, disconnecting and reconnecting â¤wiresand testing afterâ installation.
How can I test the WB17X5113 receptacle⤠with â˘a⣠multimeter?
Withâ power disconnected, you can performâ a â˘continuityâ test between the⢠receptacle terminals and the⢠corresponding wires/terminal points. Reinstall or re-seat the coil â¤element and then (with âpower âŁsafely reconnected) measure for proper voltage at⢠the receptacleâ whenâ the burner control is turned on.If you⣠observe no⤠continuity where expected⢠orâ no voltage at the receptacle whenâ the switch is calling for heat, the⣠receptacle âor â¤upstream wiring/switch â˘mayâ be faulty. âŁExercise caution when testing live circuits and consider a technician⣠if unsure.
Whatâ should I look for⢠when ordering a replacement WB17X5113?
Order by âthe exact GE part âŁnumber (WB17X5113) and⣠verify fitment against your appliance model number. Confirm whether the kit âincludes the full harness or just the receptacleand check that⣠terminal types and mounting âholes match your cooktop. Purchasing OEM âŁparts ensures âŁcorrect fit⣠and materials; aftermarket parts mayâ vary inâ quality.
Are there common repairs to try before replacingâ the WB17X5113?
First try a âvisual inspection and cleaning-remove the coilâ and clean âcarbon/oxide buildup on terminals (with power off). Tighten any loose âŁterminal âscrews â˘and replace any visibly âdamaged⢠spades or wire connectors. If â¤the issue is arcing or melted âplastic, âreplacement is â˘recommended. Also check⣠the corresponding âinfinite switch and wiring forâ damage,⤠as a faulty switch can overheat âand damageâ the receptacle.
In âŁSummary
The WB17X5113⤠GEâ Oven Oven Cooktop âŁBurner Receptacle Kit serves as a â¤critical electricalâ interface between the appliance⢠wiring and the cooktop burners, helping to maintain secure connections andâ consistent power delivery. In âŁnormal service it supportsâ reliable burnerâ operation, reduces the risk âof âarcing or â˘intermittent âŁcontactand contributes to the overall safety and performance of the range. â˘Using the correct â¤receptacle kit compatible with the⣠specific model helps preserve factory specifications and extend the usable life of the cooktop assembly.
as electrical connector failures canâ present as intermittent heating, visible damage, unusual⤠smells âor arcing, accurate diagnosis is essential before replacing components.⣠Timely replacement of a degraded or damaged WB17X5113 receptacle can â¤prevent further damage⢠to⤠wiring and associated⤠parts,â restore â¤safe operation,⤠and avoid costly repairs. Forâ safety and⣠warranty â˘considerations, replacement should followâ manufacturer guidelines⤠and local electrical codes; when âin doubt, consult a qualified technician to confirm â˘diagnosis, âperform the replacementand verify proper function afterâ service.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
