316011200â Frigidaire Oven⤠Top Burner Ignitor is an ignition âcomponent for Frigidaire gas ranges and cooktops designed to initiate combustionâ of the top burners. As an âignition element, it âcanâ take âthe formâ of a⢠spark electrode or âŁa hot surface ignitor depending on the⤠specific⣠range design; âin either case â˘its â˘primary âŁpurpose is⣠to create the âinitial energy-either⢠a highâvoltage spark or a heated surface-that causes gasâ issued at the âburner ports to ignite reliably.
Inside the âappliance, the âŁignitor interfaces with the burner head, the range’s ignition controlâ module or spark⤠generator, the gas⤠valve assembly,⢠andâ the wiringâ harness and grounding system. For sparkâtypeâ ignitorsâ this means receiving pulsed⢠high voltage from the module â¤and producing a⢠visible spark gap at the burner; for hot surface types it âmeans drawing current until the element reaches â˘ignition temperature and then allowing âthe gas⢠valve âŁto open under control⣠logic or a safety circuit.Because it sitsâ at the gas/combustion interface and is⢠part of the ignition control chain, the⣠ignitor’s electrical characteristics, mounting position, electrode gap or âsurface conditionand proper grounding allâ affect safe â˘and consistentâ burnerâ operation.
Inâ this article âŁyouâ will find â¤a technical overview of the 316011200 âignitor’s â¤function,⤠its common points of compatibility and fit onâ Frigidaireâ models, typical âfailure symptoms (for⢠example no spark, continuous clicking, delayed ignition, weakâ or uneven flameor visible element damage)and systematic troubleshooting steps (visual âinspection, âcontinuity and resistance checks, voltage andâ spark testsand diagnostic checks of âthe ignition moduleâ andâ gas valve). The⤠piece also covers replacement considerationsâ such as connector and mounting compatibility, correct orientation and clearances, recommended âtest procedures after installationandâ necessary⣠safety precautions âŁ(isolatingâ electrical âpower and gas before service) so technicians âand informed owners can make accurate⣠repairâ decisions.
Table of⢠Contents
- Function and Role of the Oven Top âBurner Ignitorâ in âGas Flow⢠Control â˘and Safety Interlocks
- How âthe 316011200 frigidaire Oven Top Burner Ignitor Works Inside â˘the â˘Appliance’s Ignition Circuit
- Common Failure â˘Symptoms and Measurable Diagnostic Indicators for a⤠Faulty Ignitor
- Replacement Considerations and âŁStepâbyâStep âInstallation Requirements for Safe Operation
- Q&A
- Future Outlook
Function and Role of â˘the Oven⢠Top Burner Ignitor in gas Flow⣠Control and Safety Interlocks
The 316011200 Frigidaire Oven Top Burner⣠Ignitor is the ignition elementâ used on compatible Frigidaire cooktop/burner assemblies to initiate combustion at⢠the âburner port.⤠In operation the ignitor supplies the required ignition energy-either a rapid spark or a heated surface depending onâ the specific burner design-and coordinates with the ârange control module so gas âŁis admitted only âwhen a âvalid ignition event is detected. The ignitor â¤itself dose âŁnot usually modulate gas flow; â¤instead it provides the ignition source and a presence/absence signal that the control â¤system uses as part âof âŁthe safety âinterlock to âallow or shut off the âgas valve within defined timing windows.
Functionally, the ignitor âmustâ match⢠theâ mechanicalâ mounting, electrical connector, âand thermalâ environment of theâ burner⤠to be a reliable replacement.â From⣠a troubleshootingâ perspective, common⣠behaviors to observe â¤are âloss of spark/heat, âŁcontinuousâ sparking without flameor intermittent ignition; theseâ indicate wiring faults, damaged ignitor âŁceramics/electrodesor failed control timing rather than a â¤gas valve issue. Technicians âshould verify connector compatibility âand insulation⤠integrity before⤠replacement; when fitted correctly theâ element will restore â¤the control board’s ability⢠to detect⣠ignition and re-enable gas flow.⢠Practical examples include an ignitor with hairlineâ cracks⤠that increases resistance âandâ fails to produce âa consistent⢠spark,or a mismatched replacement that fits mechanically but lacks the required electrical pinout and timing response.
- Ignition role: provides spark or⤠hot surface to initiate combustion.
- Control interaction: feeds presence/absence âfeedback â¤to the âŁcontrol moduleâ for safety shutoff.
- Compatibility factors:â mounting, âconnector typeand thermal â˘rating.
- Common failure symptoms: no ignition, continuous sparking, â¤or intermittent flame.
| Item | Description |
|---|---|
| Function | Provides the âŁignition source and âenables the control board’s safetyâ logic to permit gasâ flow. |
| Interface | Electrical â¤connector and mounting that must match the burner assemblyâ and âcontrol âŁtiming. |
| Common symptoms | No spark/heat, constant clicking, âŁor âdelayed ignition indicating element, wiringor timing faults. |
How âthe 316011200 Frigidaire Oven⣠Top⤠Burner Ignitor âWorks Inside the Appliance’s Ignition Circuit
The 316011200⣠Frigidaire âOven top Burner âIgnitor is the replaceable⣠element that delivers the ignition energy â˘from âthe âŁappliance’s â¤control/spark module to the burner assembly. Installed âŁat âthe â˘burner,⣠the part provides the electrical âpath and physical âŁelectrode âor hot surface required to initiate combustion when⢠theâ gas valve opens.⣠In the ignition⣠sequence theâ controlâ sends timed pulses or âvoltage to âthe ignitor; the ignitor either âproduces an electrical⢠discharge⢠across the burner gap â¤or heats⤠a âŁceramic element⣠so that fuel-air mixture⤠ignitesand its âelectrical âŁbehaviour must match the restâ of the circuit soâ the module senses properâ operation and allows⣠valve actuation.
Within the â¤broaderâ ignition circuit, âthe ignitor must present the correct connector, mountingand electrical⤠characteristics to be compatible with âŁthe âoven’s spark âmodule or control board. Technicians typically verify âcompatibility by confirming connector type and âby performing⢠a continuityâ and âresistance check-an open circuit or âvisible damage (cracked ceramic,carbon tracking) indicatesâ replacement. Practical diagnostics include listening for repetitive clicksâ from the module âwithout flame, visually inspecting for a spark or glow âduring a manual ignition commandand isolating⢠the ignitor from the moduleâ to ruleâ out â¤wiring or control faults; â¤replacing â¤the âŁignitor is the correct corrective action when measurements âand âinspection point to an internalâ failure⣠rather than⣠aâ module or valve issue.
- Common â¤symptoms: continuous âclicking with no ignition, intermittent ignition, visible arcing or a non-glowing element.
- Diagnostic steps: visual âŁinspection, continuity/resistance test, verify⣠connector fit and âŁmounting orientation.
- Compatibility factors: connector type, mounting âbracketsand matching electrical behavior with the range’s ignition module.
| Item | Description |
|---|---|
| Electrical connection | Matches⢠the rangeâ harness and âmust â˘seatâ securely to⤠allow⢠the module âŁto drive the ignitor. |
| Role in circuit | Provides the ignition energy path (spark â˘or hot surface) and⤠must present expected electrical characteristics so the control recognizesâ successful ignition. |
| Common failure signature | Open circuit, physical damage, âcarbon âtrackingâ or âŁintermittent conductivity causing noâ ignition despite correct â¤module signals. |
Common Failure Symptoms and⤠Measurable Diagnostic Indicators for a Faultyâ Ignitor
The ignitor on a âŁgas cooktop⣠provides the initial energy-either âa momentary spark or⢠a heated electrode-needed âtoâ ignite the burner’s gas flow.â The 316011200 Frigidaire Oven Top âŁBurner⣠Ignitor â¤is an⢠OEM-style replacement designedâ to match the electrode geometry, mounting pointsand insulation required for⢠compatible⤠Frigidaire ranges; correct mechanical alignment andâ gap between âŁelectrode and ground âare critical so the ignition energy⣠is deliveredâ at the burnerâ throat rather thanâ being shorted⤠to the cooktop. Failures typically manifest as no ignition, prolonged⤠sparkingor⢠intermittent ignition; âŁthese behaviors âaffect âburner response,⢠can allow gas to accumulate before ignitionand may stress the âspark moduleâ or gas valve if left unaddressed.
Diagnostic confirmation relies on⢠measurable electrical and visual indicators rather âthan subjective impressions. Technicians should verify the presence ofâ an ignition signal at âthe electrode when a burner control âis actuated,â inspect the ignitor âfor visible âŁcracks, carbon tracking or corrosion,â and⢠use an ohmmeter⢠to â¤check âŁfor âcontinuity; a complete open circuit or heavily unstableâ resistance trace indicates anâ internal failure. â˘Practical assessment also includes timed âresponseâ (milliseconds from â¤call âtoâ spark or flame) and observingâ whether the sparkâ energy is consistent⢠across âmultiple attempts, âwhich helps⣠distinguish ignitor defects from valve âor control issues.
- No⤠spark âor no glow during a call for ignition⣠– verify presence ofâ ignition voltage at the electrode â¤and check for open circuit with an ohmmeter.
- Continuous or ârepeated clicking âwith delayed flame – inspect electrode insulation and mounting gap,â and measure responseâ time from âŁcontrol signal to first spark.
- Weak or inconsistent spark – check for corrosion, carbon trackingorâ erosion at the electrode âtip andâ assess spark energy under âload.
- Intermittent⣠operation -⤠perform multiple⢠call cycles while monitoring voltage and⤠resistance to reveal thermal or intermittent â¤contact âfailures.
| Item | Description |
|---|---|
| Continuity/Resistance | Use an ohmmeter acrossâ the ignitor; âŁa persistent open circuit or large resistance drift indicates internal⢠failure. |
| Ignition Voltage⢠Presence | Measure for ignition voltage at the âelectrode⢠during a burner call; voltage âpresent with⢠no spark points to â¤electrode/insulation or gas⤠delivery issues. |
| Visualâ Condition | Inspect for⤠cracks, enamel loss, carbon trackingor tip âerosion⢠that degrade spark âpath or heat transfer. |
| Response⤠Time | Record timeâ from control actuation to spark/flame; consistent, rapid response⣠indicates healthy⤠ignition circuitry andâ ignitor function. |
Replacement⣠Considerations and âStepâbyâStep âInstallation requirements for â¤safe Operation
The 316011200â Frigidaire Oven Top Burner Ignitor is an electromechanical⤠ignition element thatâ provides the highâvoltage spark⢠(orâ hot surface in some model variations) required to ignite gas at a âŁsurface burner. Functionally, the ignitor⤠must âŁmatchâ the physical âŁmounting footprint,â electrode lengthand connector type of the â˘cooktopâ assembly so the⢠spark is positioned correctly relativeâ to the burner ports; mismatches can cause delayed ignition,â crossâfiring betweenâ burnersor persistent sparking. Technicians should verify model compatibility by matching the OEM part number and inspecting the harness and ceramic insulators for heatâ damage; a visual âŁinspection⢠combined with a quick continuityâ check with a multimeter helps â¤distinguish âŁa failed ignitor from a wiring or controlâmodule fault.
- Disconnect power and gas supply before any âdisassembly âto eliminate shock or gasâleak⣠hazards.
- Remove grates and burner caps, then detach the ignitor harness âand âcarefully⣠unfasten mounting screws; avoid contaminating ceramic insulation or electrode⤠tips with oils or grease.
- Install the replacement so the electrode tip and âinsulator align⣠with⢠the burner ports; secure âŁfasteners⣠snugly but âdo not âoverâtorque to prevent⢠cracking âtheâ ceramic.
- Route wiring clear of highâtemperature paths and reattach connectors; restore power and gas, then âŁobserve ignition timing â˘and flame shape for stable combustion and â¤absence of delayed ignition orâ gas odor.
| Item | Description |
|---|---|
| Part | 316011200 âFrigidaire⤠Oven âTop⤠Burner Ignitor – OEM replacement; confirm model fitment |
| Function | Generates ignition spark/hot surface at burner; interfaces with range âignition module |
| Required checks | Visual insulation integrity, harness âŁconnector type, âcontinuityâ test with multimeter |
| Safety | Shut⣠off electrical âpower and gas; verify no gas accumulation before final testing |
Q&A
What âŁis âŁthe 316011200 Frigidaire oven topâ burner âignitor and â¤what does it⢠do?
The 316011200 is a replacement ignitor assembly used on some Frigidaire/Frigidaire-branded gas cooktops⢠and ranges. It is indeed the electrode that produces the âspark â¤(orâ couples toâ the igniter âmodule) to igniteâ gas at the surface burners. Its job is âto create the high-voltage spark at the burner ports each âŁtime a burnerâ control is turned onâ so the gas lights reliably.
How do I know â˘if the⣠ignitor 316011200 is the â¤correct partâ for my ârange?
Verify âŁcompatibility by⤠matching your appliance model number (usually âon a tag⤠behind the oven door, on the â¤frame, â¤or under â¤the â¤cooktop) âto⣠the part listing from the manufacturer orâ a trusted partsâ supplier. Also compare the electrical connector, mounting tabs and⤠physical dimensions of the replacement to the original âpart.If⢠you are âunsure, provide the full appliance model ânumber to aâ dealer⣠or⣠parts retailer for confirmation.
What âare common symptoms that this ignitor âneeds replacement?
Common signsâ include: one or more burners â¤fail to⣠light⢠or take much longer to light, visible⣠arcing or âweak/no spark⤠at the âŁburner, continuous⢠clicking â˘without âignition,â or intermittent operation (works â˘sometimes, ânot others). Visual damage suchâ as cracked ceramic, âŁcarbon tracking (black soot âŁbridging theâ electrode), âor corrosionâ alsoâ indicates replacement is highly likely needed.
Can I test âthe 316011200 ignitorâ myselfandâ how?
Yes. Start with a⤠visual⣠inspection for⤠cracks or carbon tracking.â For electrical checks, disconnect power andâ remove the ignitor assembly. If the ignitor⣠has two terminalsâ you can check forâ continuity with aâ multimeter-an open âcircuit usually means âthe element⣠is failed. Keep in⢠mind: continuity alone doesn’t guarantee the ignitor⣠will produce a â˘spark; you can also test â¤the ignition module output (voltage) while a â˘burner is turned on-this should be done carefully by â¤a qualified person because it involves live âŁhigh-voltage. Ifâ you are not comfortable testing live circuits, replace the ignitor⣠or call⣠a technician.
How do⢠I replace the 316011200 ignitor âandâ whatâ tools are required?
General steps: turn off the â¤gas and power to the appliance,â remove the burner grates⤠and caps, remove the cooktop or access panel to reach the ignitor, disconnect â¤the electrical â¤connector,⤠unbolt or unclip â¤the âŁignitor and install â¤the new unitâ in the same orientation, reconnect wiring, reassemble âand restore power/gas, then test burners. Typicalâ tools:â screwdriver set,nut â˘drivers,needle-noseâ pliers and a multimeter⢠if testing.Always follow the⤠appliance’sâ service manual and safety procedures; if you’re not comfortable â˘working âŁwith gas or electrical⣠components, â¤hire a â˘qualified technician.
Is replacing the 316011200 ignitor difficult âand âhow long⤠does it take?
Difficulty â˘is moderate: for âa⣠mechanically-inclined homeowner it frequently enough⣠takes 20-60⤠minutes depending on cooktop design and âŁaccessibility. âDifficulty increases if âthe cooktop must be removed from the countertop âor if mounting⤠hardware is corroded. If you lack⣠basic electrical and mechanical skills â˘or access to the service manual, consider â˘professional service.
How much⤠does the 316011200â ignitorâ cost andâ areâ there aftermarket options?
Prices vary by seller⢠and⢠region; the part alone typically ranges from a modest OEM price to a â˘similar aftermarket âreplacement âprice. â¤Aftermarket equivalents âexist and can âbe cheaper, but verify connector fit and â˘mounting compatibility before buying.â Factorâ in any labor cost ifâ you choose professional installation.
Are there safety precautions â¤I âŁshould take when replacing or testing this ignitor?
Yes. âAlways shutâ off the â˘appliance’s electricalâ power and gas â˘supply before disassembly.â Avoid touching live wiring â¤or the ignition⤠module when the appliance is powered. Handle ceramic-insulated electrodes carefully to prevent cracking.If you âsmell gas âŁor suspect a leakâ at⣠any time, stop work, ventilate the area and contact a⤠qualified technician or gas⣠utility. When in doubt, hire a certified appliance technician.
Future Outlook
The 316011200⢠Frigidaire oven âtop burner ignitor is a â¤critical componentâ that initiates âand sustains the burner flame onâ compatible⣠Frigidaire ranges. By âŁreliably âproducingâ the required âsparkâ orâ heat to ignite gas, it âŁdirectlyâ affects cooking âperformance, efficiencyand⢠the safe operation ofâ the appliance.A functioning⣠ignitorâ helps ensure consistent âheatâ delivery,⣠minimizes ignition delaysandâ reducesâ the risk of gasâ accumulation that can create a safety hazard.
Accurate diagnosis is essential when â¤ignitionâ problems arise.â Simple observations-such as failure to light, delayed ignitionor⤠visible damage to the ignitor-should be followed by systematic testingâ using recommended procedures and tools. Confirming the symptom source before replacing â¤parts⣠avoids needless expense and ensures that the â¤root cause (electrical, control âmodule, gas supply,⤠or the ignitor itself) â¤is addressed correctly.
When âreplacement is required,â installing a compatible OEM part such âas the 316011200 and adhering toâ manufacturer instructions maintains appliance performance⢠and âsafety.⢠If there âŁis⢠any uncertainty about diagnosisâ or⤠safe âinstallation, engaging⤠a qualified service technician âis⣠advisable. âProper diagnosis, correct replacementand professional âŁinstallation when needed all contribute to reliable operation, âŁextended service lifeand user safety.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
