241860801 Frigidaire Refrigerator Ice Container Assembly is⤠a moldedâ ice-storage and delivery component used inâ Frigidaire âŁrefrigerator â¤freezers; it houses harvested ice,⣠guides ice to âthe dispenser or internal binand â¤typically incorporates theâ auger or pickup geometry required for controlled dispensing.As a mechanical subassembly rather⤠than an electronic control, the part generally consists of a plastic â¤bin, ice-guiding vanes, mounting pointsand interfaces for â¤an auger motor or âdispenser actuator. Its design focuses on containment, low-frictionâ deliveryand alignment with the ice maker and dispenser mechanisms.
Inside the appliance, the ice container assembly interfaces directly with the automatic ice maker âŁ(ice production and harvest cycle), the auger or âdelivery motor (mechanical transport)and various user and safety switches or âsensors â(ice level sensing, door interlocks, dispenserâ switches). It âalso aligns with the⣠freezer cavity and âinsulation to maintainâ proper clearance and prevent ice bridging â˘or jamming.Because â˘it sits⣠between the ice maker and âthe user-facing dispenser or storage bin, â¤the assembly affects ice quality flow, auger loadandâ the reliability ofâ dispensing operations; damage, deformationor misalignment⤠can cause increased âmotor current, jamsor⢠inaccurate level sensing that cascade into other system faults.
In this article readers will⤠find a âŁtechnical overview of the 241860801 assembly, including⢠its functional role, physical and electrical â˘interfacesand typical points of wear or failure.Guidance âŁwill âcover compatibility considerations with Frigidaire model families, diagnostic symptoms toâ distinguish container-related problems from motor or sensor faults, step-by-step troubleshooting checksand practical replacement considerations such⢠as mounting orientation, fastener typesand torque or âengagement checks.Theâ goal is toâ provide technicians,⤠engineersand appliance owners with actionable⢠information to identify container-related issues and perform informed repairs orâ replacements.
Table of Contents
- Function and Role of the Ice Container Assembly in Ice Production, Storageand Dispensing
- How the 241860801 Frigidaire Refrigerator â˘Ice Container Assembly Works Within the Ice⤠Maker, Auger Motorand Doorâ Sensor Systems
- Common Failure Symptoms and Diagnostic Tests for the Ice Container âAssembly
- Compatibility, Replacement Considerationsand Step-by-Step Installation Procedures for the Ice Container Assembly
- Q&A
- to sum up
Function and role of âthe Ice Container Assembly in Ice Production, Storageand Dispensing
The 241860801 â˘Frigidaire Refrigerator ice Container Assembly functions as the intermediary storage and dispensing â¤component that receives ice from the ice-maker ejector, isolates the ice â¤to prevent â¤freezer airflow from â˘accelerating melt/frostandâ presents the ice to the dispenser mechanism. Its molded geometryâ contains anti-bridging ribs and a sloped floor that promote gravity feed towardâ the⣠auger or dispensingâ chute; the assembly also âintegrates a fill-level flag or optical/magnetic interface that communicates with the refrigerator control so âproduction stops when the bin reaches capacity. Compatibility depends on exact mounting tabs,sensor flag position,and drive-coupler alignment,so replacement âbins must âmatch the original dimensions and sensorâ interface toâ avoid continuous⣠production,failed dispensing,or auger disengagement.
- Features: âmolded⣠ABS body, anti-bridge interior ribs, fill-level â¤flag or sensor interface, drive/auger â¤coupling âarea.
- Operational behaviors: promotes âgravity âfeed, reduces frost bridgingand âtriggersâ the ice-maker shutoff when âfull.
- Common âsymptoms âof failure: ice jams, frost⢠bridging, sensor âmisreads (overfill or continuous production), cracked bin or broken latch preventing proper engagement.
In dispensing systems the âassembly must allow⢠the auger or drive paddle âto rotate freely under low torque; â¤excessive resistance indicates ice packing or mechanical interference (frequently enough⣠resolved by checking âbin seating, chopping large cubes, âor replacing a cracked bin). Thermal behavior is largely passive-low thermal conductivityâ of the plastic âreduces rapid melting but does not provide insulation-so routine defrosting⣠and cleaning âminimize odor, clumping and bacterial âgrowth. technicians replacing the⤠bin shouldâ verify sensor flag position, â˘ensure the â˘auger âcoupling mates withoutâ play, âand confirm the âbin seals against the ice-maker ejector to restore normal â¤fill/stop cycles.
| item | Description |
|---|---|
| Part number | 241860801 (Frigidaire iceâ containerâ OEM replacement) |
| Typical⢠capacity | Approx.2.5-4.5 lb of cubed ice (varies with cube size) |
| Material⣠& compatibility | Injection-molded⤠ABS with⣠low-friction interior; fits Frigidaire units that share the same mounting tabs, sensor⢠flag geometryand auger coupling-verify OEM fit list before ordering |
How the 241860801 Frigidaire Refrigerator Ice Container Assembly Works â¤Within⣠the Ice⤠Maker, â¤Auger Motorand Door Sensorâ Systems
The 241860801 Frigidaire Refrigerator Ice Container Assembly serves as the receptacle and mechanical interface between the ice maker’sâ harvest assembly and the auger⤠motor. It provides the geometry⢠and mounting features that⢠locate the auger drive, recieve discharged iceand present the container position or actuator to the refrigerator’s full-bin and door sensing mechanisms. In practical terms the container includes a splined couplingâ pocket or drive recess thatâ the auger motor shaft⢠engages; correct axial and rotational alignment of the container is required for reliableâ iceâ transfer,⢠and mis-seating or damaged â˘splines commonly cause symptoms such as â˘a spinning auger with no ice output or intermittent feed due to slippage or binding.
The⢠container⢠also functions as a mechanical/electromechanical âinterface for level and door interlocks: a built-in actuator tab or magnet on the container physically trips a microswitch or is sensed optically/magnetically by the chassis sensor to â¤indicate full-bin conditionand the container’s position contributes to the door sensor â˘interlock to âstop auger operation when the door is âopen. Typical failure âmodes that affect⣠system behavior include cracked coupling splines,â worn actuator âtabs, switch fatigueand ice bridging inside the bin that hold the full-bin actuator closed; troubleshooting normally involves checking container seating, inspecting the coupling and â˘actuator surfaces for wearandâ verifying sensor continuity or signal state before âŁreplacingâ the container assembly orâ associated âswitches.
- Auger drive interface âand seating alignment
- Full-bin actuator/tab â¤or sensor engagement
- Door interlock/magnet position and⤠chassis mounting
- retention tabs and bin capacity affecting ice flow
| Item | Description |
|---|---|
| Auger coupling | Splined ârecess⢠that accepts the auger motor shaft; wear here causes⣠slippage or⢠no feed. |
| Full-bin sensor actuator | Tab or magnet on the container that trips a microswitch or⣠sensor to stop ice production. |
| Door interlock interface | container⣠position and/or magnet that allows the⤠door sensor to permit or inhibit the auger âŁmotor. |
Common Failure Symptoms and diagnostic Tests for the Ice Container âAssembly
Theâ ice container is the passive mechanical interface between the ice maker, the storage binand the dispenser mechanism; correct fit and geometry are â¤critical for reliable operation.The 241860801 Frigidaire Refrigerator Ice Container⢠Assembly âŁsupports the ice augerâ or gravity feed, locates the bin-full âswitchand⤠provides the chute alignment⢠that prevents jamming.⢠Typical failure âmodes are mechanical rather than electronic:â warped or cracked walls âthat permit frost â˘bridging, damaged mounting tabs or dovetail surfaces thatâ allow lateral playand worn internal guides that permit ice to⣠pile against âthe dispenser opening. Compatibility is primarily dimensional and mounting-feature âbased-verify the container footprint, tab spacingand sensor locations⤠against the service⣠manual for⤠a given refrigerator model before ordering a replacement.
- Dispenser jams or motor stalls – âinspect âŁfor obstructions inâ the chute and auger path; perform a âmanual rotation test and check for rubbing or crushed ice; measure clearance between auger âŁandâ housing.
- No dispense despite ice present – test bin-full or â˘door âŁswitches⣠for continuity with âŁa multimeter and verify the⣠container is fully seated (listen for engagement snaps or verify tab alignment).
- Ice clumping or excessive bridging – check for cracks or gaps⣠that let warm air enter andâ measure freezer temperature;⢠perform a controlled defrost to eliminate residual bridged ice and re-evaluate.
- Rattling or loose fit – examine mounting tabs and dovetail rails for roundingâ or breakage and âcompare measured dimensions to the replacement part specification.
- Visible leaks or â˘internal frost accumulation – âŁconduct a water test âaround seams âŁand inspect for sealing failures or stress fractures in the container shell.
A pragmatic diagnostic workflow combines a visual/mechanical inspection with a few simple âelectrical checks: verify seating and mechanical engagement first, thenâ isolate electricalâ inputs such as the bin-full switch and, âif applicable, the auger motorâ supply. Such as, temporarily â¤removing the container and operating the dispenser mechanism empty can distinguish a container-related mechanical jam fromâ an electrical or motor failure. If measurements âshow dimensional deviation or mounting feature⢠damage, replacement is usually the moast reliable repair; when ordering,⤠cross-reference model numbers and physical mounting features rather than relying âsolely⣠on âŁmodel name to ensure⤠correct fit and restore⣠intended clearances and sensor⤠actuation.
Compatibility,Replacement considerations,and Step-by-Step installation Procedures for the⣠Ice Container Assembly
The 241860801 Frigidaire Refrigerator Ice Container Assembly is the⢠molded storageâ bin that receives ice from the icemaker⣠and transfers it to the dispenser or customer-access âshelf. Functionally it must align with the auger drive, chuteand ice-level sensor so that ice advances without bridging⤠or jamming;⣠common failure modes are cracked mounting tabs, deformed â¤guide railsor a misaligned âsensor flag that prevents the optical or mechanical sensor from detecting ice. Verify compatibility by matching the refrigerator model number⤠and checkingâ that the container’s rail spacing,sensor flag⢠location,and mounting bosses correspond to the OEM specification; replacing with an incorrect ârevision can leave the auger misaligned or allow âice to obstruct the dispenser chute,producing grinding âŁnoise⢠or intermittent dispensing failures.
Follow these practical steps⣠for replacementâ and verification to restore reliable operation:
- Disconnect power â and, ifâ applicable, water supply to prevent electrical or water damage.
- Empty the container and remove residual⣠ice to reduce weight and avoidâ further jamming.
- Remove fasteners â¤securingâ the container, noting screw type and location; lift the assembly straight out along its guide rails to âavoid âsnapping tabs.
- Inspect guide rails, sensor flag, auger couplingand chute seals; replace any brittle or worn components before installing the new assembly.
- Slide the replacement âcontainer into âthe guidesâ until the mounting bosses seat, engage the auger couplingandâ reinstall screws-tighten by hand then a small additional quarter-turnâ to prevent striping.
- Restore power, run an automatic harvest or diagnostic cycleandâ observe⢠ice delivery and sensor operation â˘for at least one dispense cycle.
| Item | Description |
|---|---|
| Mount interface | Slide-rail with â˘dual tabs; must match rail⣠spacing âand boss⣠positions on âŁthe refrigerator frame |
| Screw type | Typically â#8 pan-head self-tapping for sheet metal; retain original lengths and locations |
| sensor flag clearance | Plastic âtab engages optical/mechanical sensor with ~1-3 mm clearance; adjust âŁif misaligned |
Q&A
What is part 241860801 (Frigidaire ice container assembly)?
Part 241860801 is the âŁice containerâ (ice bin) assembly⣠used with select frigidaire refrigerators to collect and hold ice produced by the ice maker and feed it to the dispenser or accessâ door. It is an OEM replacementâ part; exact fit â¤and features (agitator/auger recesses, sensor notches, mounting âtabs) depend on the refrigerator model.
Which refrigerators does 241860801 fit?
Compatibility varies âŁby model and⢠production date.Do notâ rely â¤on appliance appearance alone – confirm fit â˘byâ checking your refrigerator model and serial number against Frigidaire’s parts lookup, the owner’s manualor a âŁreputable parts dealer.If you order online, verify the seller lists 241860801 as âcompatible with your exact model.
How do I remove andâ install the â˘ice containerâ assembly?
Typical steps: â1) Stop the ice â˘maker or lock the dispenserâ (or turn the refrigerator off/unplug âif you prefer) to prevent the âmechanism from operating âwhile you work.⢠2) Open the freezer/ice access door and âslide the ice bin straight out; on some models you may need to lift slightly or⢠release a tab. 3) Empty the ice into a cooler if needed. 4) Inspect/mount the replacement so tabs âand notchesâ align,â then slide it back intoâ place until it seats.⣠5) Re-enable the ice maker/dispenser. If the unit has electrical connectors or sensors ânearâ the bin, follow the manufacturer instructions and disconnect power before handling those components.
My dispenser is jamming â˘- could the ice container be the problem?
Yes. Common causes related to the ice container include: ice bridging (packed or melted/refrozen ice),a cracked âor misshapen bin that prevents proper alignment,foreign objects in the bin,or a damaged bin feature that interacts âwith the auger or sensor. inspect the bin for ice⢠bridges,⣠cracksand correct seating. if the bin looks fine, the auger motor, dispenser chute,⢠or ice maker may be at fault.
How can I tell if the ice container is â¤damaged âand needs replacing?
Replace the bin âŁif you see⢠visible cracks or large deformations, if the bin will not seat properly or engages the auger/door incorrectly, if moving parts on the bin (tabs/notches) are brokenor if thorough cleaning does not remove persistent odors/stains. Also replace if the dispenser ârepeatedly jams and the bin inspection reveals âwarping or internal damage.
What is the proper⣠way to⣠clean the ice container?
Hand âwash the bin with â¤warm water and a mild dish soap, rinse thoroughlyand dry fully before reinstalling. Avoid abrasive scouring pads, strong solventsor bleach â˘unless the manufacturer specifically permits⣠them. Most ice bins are not recommended for dishwasher use because dishwasher âŁheat can warp the plastic-check your manual to be sure.
Should I⢠buy an OEM 241860801 or an aftermarket replacement?
OEM (Frigidaire) parts are recommended for guaranteed fit,correct mounting features,and original material quality. Aftermarket bins⤠can be less expensive but may have fitment issues orâ different âclearances that affect dispenser or sensor operation. If you choose aftermarket, buy from a reputable supplier with a clear âcompatibility guarantee and return policy.
Will replacing the ice container fix bad-tasting or foul-smelling ice?
Possibly. If smells or tastes are caused by residue, moldor trapped food⢠particles in the bin, replacing it will eliminate that source. Before replacing, clean the bin thoroughly, replace the refrigerator’s water âŁfilter if applicableand run several cycles of ice production and discard the first few batches. If the problemâ persists after cleaning/replacing the binâ and filter, check the water supply line and ice maker for âcontamination.
In Conclusion
The 241860801 Frigidaire Refrigeratorâ Ice Container Assembly functions as an integral component of a refrigerator’s â¤ice-making and dispensing system,providing secure storage,orderly delivery and alignment with sensors and dispensing mechanisms. Its conditionâ directly affects ice quality, user convenience and overall appliance performance-contributing to hygienic⣠storage, consistent dispensing and reduced risk of âjams or leaks that can impair dailyâ operation.
Timely and âaccurate diagnosis âof issues related to the ice container assembly is crucial to determine whether repair or replacement is required. signs such as visible cracks, misalignment, difficulty dispensing,â sensor errors or abnormal noises warrant inspection. When replacement is necessary, using the â˘correct 241860801 assembly and following âŁmanufacturer guidelines or engaging a qualifiedâ service technician helps ensure proper fit, restore function and protect âanyâ remaining warranty coverage.
Maintaining awareness of the assembly’s condition and addressing problems promptly preserves refrigerator âreliability and ice quality over time. Proper diagnosis and replacement, when indicated, are pragmatic steps to avoid secondary damage and maintain the appliance’s intended performance in a safe, sanitary and cost-effective manner.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
