WB17X5113 GE Oven āOven Cooktop Burner Receptacle Kitā is an electrical connector assembly designed to ā¢provide a secure, serviceable interface between āa cooktopā burner element orā£ igniter and the applianceā wiring harness.ā¢ As a receptacle kit it typically includes mating terminals and an insulated housing intended to replace worn or damaged connections at the burner termination point, restoring mechanical retention and electrical continuity without replacing larger assemblies.
Inside the appliance the receptacle serves as the immediate electrical ājunction between the heating āor ignition element and the range’s power distribution and control systems. It carries lineālevel current to the element or delivers the igniter feed while mating with switches, āinfinite controls, terminalā¢ blocksā or spark modules dependingā¢ on the cooktop design.As it is indeed located at a highātemperature, vibrationāprone area, āthe component must maintainā¢ low contact resistance, resist thermal degradation andā£ prevent arcing or intermittent connections that could affect control inputs or safety circuits.
This article will ādescribe the WB17X5113’s āfunction and physical ācharacteristics, explain compatibility considerations (terminal type, wire gaugeand mounting fit), ālist common failure symptoms such as intermittentā heating, visible burningā¢ or arcingand loss of continuityand present practical troubleshooting checks a technician can use ā¤(visual ā¤inspection, continuity and voltage measurements under safe, deāenergized procedures). It will also cover replacement considerations āincluding matching terminal geometry and insulation materials, proper routing and strain relief of wiring,ā¤ and verificationā£ steps to āconfirm ā¢a reliable repair.
Table āof Contents
- Function and Electrical Role of the Cooktop Burner Receptacle in GE Oven Systems
- How the WB17X5113 GEā¢ Oven Oven Cooktop ā¢Burner Receptacle Kit Works Inside the Appliance
- Common Failure Symptoms āand Diagnostic Indicators of Cooktop Burner Receptacle Faults
- Compatibility,Replacement āConsiderations,and ā¤Installation Procedures for the WB17X5113 Receptacle Kit
- Q&A
- Key Takeaways
Function āand Electricalā¤ Role of the Cooktop Burner Receptacle in GE Oven āSystems
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is the molded ā£electrical connector assembly that provides theā mechanical and electrical interface ā£between a surface āheating element andā the oven’s wiring harness. In practice this receptacle secures the element spade terminals, maintains contact pressure through thermalā£ cyclingand insulates live conductors fromā the cooktop frame; its material selection and retention features ā£are chosen to resist high surface temperatures and prevent movement or arcing at the joint. Technicians replacingā£ a damaged receptacle use this kit to restore the original ā¤connector geometry and mounting arrangement so the element seats correctly and the harness plugs in with the designedā retention force and clearance to surrounding components.
Electrically, the receptacle must carry the element’s full line current with minimal contact ā¤resistance; ā¢any increase in resistance ā£at the connection raises local temperatureā and accelerates housing degradation. Common failureā¢ signatures include intermittent heating of the element,ā£ visible melting or charring at the ā£receptacleand loose or pushed-back terminals.For diagnosis and replacement,confirm the terminalā configuration and locking features match the original part andā inspect the ā£mating spades āfor corrosion or deformation-replacingā the receptacle without matching orientation or terminal count can leave a high-resistance joint or create an unsafe installation. The component is intended for direct replacement on compatible GEā cooktops and should be cross-referenced to model ā£and wiring ā£diagrams ā¤before installation.
- Key features: heat-resistant housing, positive retention clips, low-resistance terminals compatible with element spadeā¢ fittings.
- Typical symptoms of failure: erratic element heat, discoloration ā¢or melting of āthe connector,ā¤ audible āarcing under load.
- Compatibility note: match terminal count, āspacingand mounting footprint to the original receptacle during replacement.
| Item | Description |
|---|---|
| Function | Provides insulated electrical connection and mechanical retention for theā surface element terminals. |
| Common failure ā¤signs | Loose terminals, ā¢plastic deformation, increasedā¢ contact āresistance,ā visible charring. |
| Compatibility | Designed to replace the factory receptacle on specified GE oven ā¤cooktop assemblies; verify part ā¤cross-reference ā¤before use. |
How the WB17X5113 GEā Oven Oven Cooktop ā¤Burner Receptacle Kit Works Inside the Appliance
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit āserves as the electrical interface between a cooktop surface element and the applianceā wiring harness.It is a molded receptacle that accepts the burner element’s spade terminals and providesā high-temperature āinsulation āand mechanical retention so the element maintains reliable contact under repeated thermal cycling. Inside the appliance the kit functionsā¢ to route theā element’s heating current through ā¢secure metal contacts while isolating the connection from the āsheet metal āchassis; a degraded or looseā£ receptacle increases contact resistance and can cause intermittent heating, ā£arcingorā localized overheating. For example, a cracked housing or corroded ācontact in the receptacle often presents as aā burner that heats erratically or not at alland replacing this kit with the correct WB17X5113 ā¤part restoresā¤ the intended low-resistanceā£ connection when matched to the cooktop and harness configuration.
- Electrical: female spade contacts deliver āelement current with minimal added resistance ā¢when fully āseated.
- thermal: molded from high-temperature thermoplastic to resist softening and deformation near āthe ācooktop.
- Mechanical: keyed housing and retentionā¢ features preventā¢ rotationā and ensure alignment of terminals.
- Serviceability: common failure modes are melted housing, loose contactsandā corrosion; replacement is typically a direct swap with the matched harness orientation.
| Item | Description |
|---|---|
| Function | Provides insulated electricalā mating point between burner element spades and appliance wiring harness. |
| Typical materials | High-temp thermoplastic housing with tin- or nickel-plated brass contacts. |
| Common faults | Housing melt, contact wear āorā corrosion, poor seating causing highā resistance and arcing. |
when servicing, always disconnect power before testing ā¤or replacing the ā£receptacle and verify continuity with a multimeter āonce installed; a correctly functioning WB17X5113 kit should ā¤show low ohms betweenā£ theā£ harness conductor and the element terminal āwhen ā£seated. Installation ā¢requires matching terminal orientation and wire gauge of the appliance harness-mismatched terminals or āincorrect wiringā¤ increases contact stress and accelerates failure. in ā£practice, technicians confirm mechanical fit (keying andā clip retention), inspect for heat damage or carbon tracking on matingā¢ surfacesand thenā£ re-test the element under controlled conditions; ā¢if intermittent resistance is observed, a clean, correctly seated āreceptacle is often the definitive repair, whereas additional diagnosis of the element āor harness may be required when resistanceā¤ remains āhigh.
Common Failureā symptoms and Diagnostic Indicators of Cooktop Burner Receptacle Faults
the ā¢WB17X5113 GE Oven Ovenā Cooktop Burner Receptacleā Kit is the replacement receptacle assembly thatā£ provides the electrical and mechanical interface between a surface burner element and the oven/range wiring harness. In normal operation the receptacle maintainsā£ low-resistance contact andā stableā¢ mechanical retention ā¤so the element receives fullā¤ lineā£ voltage; common failures manifest as open circuits, increased ācontact resistance, ā¢arcingor physical deformation of the ā¢nylon housing and terminals.Technicians commonly ā¤see partial heating (burner heats only on high setting), complete loss of a single burner,ā¢ visible discoloration or pittingā¢ of āterminalsor localized melting at theā connector, all of which are ā¢consistent with a failed receptacle rather thanā the element itself. When confirming compatibility, match the kit to the applianceā model and terminal style-spade vs. riveted ā¤lugs-to ensure correct fit and contact geometry.
- Noā heat on one burner while other burners function normally (suggestsā£ open or high-resistance contact).
- Intermittent ā¤heating or flicker between settings (indicates marginal ā£connection or arcing under load).
- Visible melting, carbon trackingor pittedā terminals at āthe receptacle.
- Voltage present at ā¤the harness but absent or reduced at theā¤ elementā terminalā¢ (measurementā¤ required to isolate āreceptacle).
- Measured ā£continuity much higher than expected across connector (typically >1-2 Ī© indicates degradedā contact).
| Item | Description |
|---|---|
| Continuity | With ā¢power removed, resistance āthrough receptacle and element should be very ā£low (<1 ā¤Ī©). Readings above ~1-2 Ī© suggest corrosion or aā£ loose ā¢terminal. |
| Supply voltage | Line voltage to the harness should match theā appliance specification (electric ā¢ranges ācommonly use ā¢~240 V split-phase); presence of voltage at āharness but ānot at the element indicates a receptacle fault. |
| Visual ā¤inspection | Look for melting,discoloration,pitting,or carbon tracks on terminals and ā¤housing-these point to overheatingā and intermittent contact. |
| Operational symptom | Burner that only heats on high or cycles under load often traces to increased contact resistance at the ā¢receptacle rather than the element. |
Diagnostic workflow starts with a cold visual inspection and verification of receptacle style, followed by continuity checks and load-side voltage āmeasurements with safe āprocedures and proper isolation. For example, a front-right element that reaches fullā temperature on high but fails to simmer likely has rising contact resistance at the receptacle; replacing the assembly with the correct WB17X5113 kit or equivalent spade-style receptacle and retesting typically restores stable contact and eliminates heat-related deformation. Record resistance and voltage values beforeā and after replacement to confirm the receptacle was the root cause and to avoid needless element swaps.
Compatibility, Replacement Considerations, āandā¤ Installation āProcedures for the WB17X5113 Receptacle Kit
The WB17X5113 GE Oven Oven Cooktop āBurner Receptacle Kit is an insulated āconnector assembly that provides theā£ removable electrical interface between a cooktop burner or infinite ā£switch and āthe appliance wiring harness. Technically, the kit supplies a high-temperature ā¤receptacle and mounting hardware designed to accept flat quick-disconnect tabs and isolate the connection from heat and vibration. Before ordering or installing, confirm the kit matches theā£ terminal count and tab geometry on the existing component (for example, single-, two- or three-tab āconfigurations and standard āquick-disconnect widths),ā and verify the material and wire-gauge ācompatibility with the oven’s harness to prevent overheating or poor contact under load.
Replacement ā£and installationā require basic electrical safety and attention to mechanical fit: isolate mains power, document wire locationsand inspect theā£ harness and mating terminals for corrosion or heat damage before reuse. typical installation steps ā£include removing the access panel, āreleasing ā£the old receptacle, transferring wires to the new receptacle with correct orientation and secure crimps or push-on terminationsand securing the receptacle to the chassis so it cannot contact hot surfaces. Common operational symptoms that indicate replacement are intermittent element operation,visible melting or charring at the connector,arcing noises,or ā¢a loose fit at the spade terminals.
- Power off and lock out the appliance supply before āstarting work.
- Label wires andā photograph connections to ensure correct reassembly.
- Replace only with receptacles that match ā¤tab style and insulation material for high-temperature āuse.
- After installation, perform a continuity check and a low-power functional test of each burner.
| Item | Description |
|---|---|
| Terminal type | Quick-disconnect spade tabsā (verify number andā¤ width to match harness) |
| Wire gauge | Typically 14-18 AWG for cooktop circuits; confirm against appliance wiring |
| Material | Heat-resistant insulated body (plastic or ceramic reinforced) to resist high surfaceā temperatures |
Q&A
What ā¤is the WB17X5113 cooktop burner receptacleā kit andā what does it do?
The WB17X5113 is an OEM GE āreplacement receptacle (terminal block/connector) that the electric surface (coil) burner element plugs into. āIt provides the ā¤electrical ā¤connection between the stove’s wiring and the ā¢removable cooktop element. If the receptacleā¢ is damaged, the āelement may ā¢not make a reliable connection, overheator arc.
How do I knowā¢ if the receptacle is bad and needs replacing?
Common signs āinclude ā¢intermittent or no āheat from aā particular burner, ā£visible melting orā¢ discoloration of the plastic housing, burntā or pitted terminals, aā¤ burning smellā at the burner areaor arcing/sparking when the elementā is āinstalled. If the element and infinite switch test good but the burner āstill fails, the receptacle is a likely cause.
Is WB17X5113 compatible with my GE/Hotpoint range?
Compatibility depends on the appliance model. WB17X5113 is used on a number of GE and affiliated-brand electric ranges withā¢ plug-in surface elements. Always confirm compatibility by comparing the part number in your appliance’s parts list or consult the āmodel numberā of ā¢your range; many parts suppliers allow āyou to enter the appliance model to verify fit.
Can I replace the receptacle myself and what safety precautions shouldā¤ I take?
Yes, a mechanically competent DIYerā£ can replace it, ā£but you must first disconnect all power at the circuit breaker ā¢(do not rely onā the stove’s controls). Use a non-contact voltageā¢ tester to verify power is off. ā¤Wear gloves andā eye protection,ā¢ and avoid touching live wires. Ifā£ you’re uncomfortable working around 240 V wiring, hireā a qualified applianceā£ technician or electrician.
What tools and tests are needed to ā¢replace āor diagnose the receptacle?
typical tools: screwdriver set, nut driver ā¤or socket set, needle-nose pliers, multimeterand a non-contactā¤ voltage tester. Diagnostic tests: with power OFF, check continuity of the element and continuity through the receptacle terminals using a multimeter. With power ON (only if confident and safe), measure voltage acrossā¢ the element terminals to confirm proper supply (typically the element sees across-the-terminals voltage for an electric cooktop). Always follow safety precautions when measuring ā£live voltage.
Do I have to replace the entire cooktop or element if the receptacle is damaged?
Not usually. Theā receptacleā¢ is a replaceableā£ component; you can replace the WB17X5113 without replacing the entire elementā or cooktop in most cases. However, if ā£the mounting or surrounding components are heavily damaged (melted, warped),ā additional repairs may be required.
are there common installation āmistakesā¢ to avoid?
Avoidā¤ reusing damaged screws or overtightening,ā£ which can crack the receptacleā housing. Make sure wire connections are clean and tight and that the ā£correct wires go to the correct terminals. ensure the orientation matches the original so the element seats properly. never work with power onand double-check that no wiresā¤ are pinched when reassembling.
Whereā£ should I buy āWB17X5113 ā£and is there a warranty?
Buy fromā reputable sources: authorized ā¢GE parts dealers, official GE/Whirlpool parts websitesor well-rated appliance parts retailers.ā£ OEM parts ensure exact fit. Warranty terms vary by seller; OEM sellers often provide a limited warrantyā (check ā¤the product listing). ā£Keep your receipt and the appliance ā¢model/part number for returns or warranty claims.
Key Takeaways
Theā¤ WB17X5113 GE āOven Oven Cooktop Burner Receptacleā¤ Kit serves as a critical electrical interface between the cooktop burners and the appliance’sā wiring, ā£ensuring secure terminal connections, reliable current flowand resistance to heat andā wear.As a relatively smallā¢ component, āit plays a substantial role in maintaining consistent burner āperformance, preventingā arcing or ā¢intermittent operation,ā£ and supporting theā¤ overall safe functioningā of the oven and cooktop assembly.
Because failure of the ā¢burner receptacle can lead to poor heating,intermittent burner operation,or electrical safety concerns,accurate diagnosis and timely replacement are important. Visual inspection, appropriate electrical testingand recognition of symptoms such asā inconsistent ignition,ā¢ visibleā£ damageor burning odors can indicate the need for service.When replacement is necessary, using the correct OEM orā¤ approved replacement part and following manufacturer guidance-or engaging ā¤a qualified technician-helps ensureā a safe, effective ārepair and reduces the risk of further damage.
Maintaining attention to components like the WB17X5113 kit as part ofā routine āappliance care helps preserve performance and safety over the life of the oven and cooktop. Thoughtful diagnosis and professional, standards-compliant replacement āwhen āwarranted ā£provide ā¤theā£ best assurance of reliable operation and user safety.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
