WB16K10026â GE Oven Range Stove Cooktop Double Burner is aâ replacement double-ring cooktopâ heating element assemblyâ designed for use in electric GE ranges⤠and cooktops. âŁThe component is a surface burner assemblyâ that provides âtwo concentric heating zones (inner and outer) âŁwithin a single element, together with it’s mounting hardware and⣠electrical â˘terminals; âit is âintended â¤to beâ installed âbeneathâ the âcooktop surface to transfer heat⤠to cookwareâ through direct conduction or radiant heating.
Within âthe appliance, the double⣠burner serves asâ the âprimary â¤heat-generating element for one âcooking zone and interfaces directly with the appliance’s power â¤distribution, user controls â¤and switching components. Electrically it connects toâ the ârange’s terminal âblock and is⣠controlled âŁby an infinite â˘switch or control board/relay that modulates current to the âinner and outer circuits;⢠mechanically it is supported âŁby the cooktop âŁsurface or â¤drip panâ andâ must maintain⢠proper insulation and grounding.â Proper function depends on correct electrical continuity, âsecure âterminal connections, â¤correct mounting and compatibility with the cooktop’s control scheme and thermal clearances.
This articleâ will âŁdescribe the WB16K10026’s function⤠and construction, outline typical compatibility and specification pointsâ to check (physicalâ dimensions, terminal configuration and rated power),⤠identifyâ common failure symptoms (no heat, partial âor uneven heating, arcing, visible â˘damage)and provide a âstructured approach to troubleshooting andâ replacement. Technicians and appliance⣠owners will find guidance â¤on⤠diagnostic checks (continuity⢠and resistance⣠measurements, verifying supply voltage and controlâ operation)and considerationsâ for safe, correct âreplacementâ including matching mounting, terminal orientation and âratings.
table⢠of Contents
- Functionalâ Role âŁand Performance Requirements of the â¤Cooktop Double burner â¤in GE âoven Range⣠Systems
- How the WB16K10026 GE Oven âŁRange Stove Cooktop Doubleâ Burner Works Inside the â˘Appliance: Internal Components, Electrical Interfaces,⢠and Heat Transfer âPathways
- Common⣠Failure Symptoms, Diagnostic Measurementsand Root-Cause Indicators for âthe Cooktop Double Burner
- Compatibility,â Replacement Considerations, Installationâ Proceduresand Troubleshooting⣠Guidelines âfor WB16K10026 on GE Range Models
- Q&A
- In Retrospect
Functional Role and Performance Requirements of the Cooktop â˘Double Burnerâ in GE Oven Range Systems
The WB16K10026 GE Ovenâ Range Stoveâ Cooktop Double Burner âis a⢠two-zone surface âŁelement â¤designed to provide selectable âŁheat areasâ for different cookware⤠sizes byâ energizing either the inner coil, outer coilor both. In operation, the part is driven by âthe range’s control switchâ or electronic control board â¤and must match âthe stove’s mounting footprint, terminal configurationand electrical ratings to behave correctly;⢠mismatched resistance, incorrect âŁterminal spacing,â or â˘wrong voltage⤠can cause poor heat output, slow âthermal responseorâ control âfailure.â Technically, the â¤double⤠burner combines â¤two⣠concentric⣠heating elements that share a⤠singleâ mounting bracket and â˘thermal⣠mass, so heat-up time, steady-state wattage distributionand the element’s guarded âinsulation determine⤠how well it â˘sustains simmering⤠versus high-powerâ boiling cycles.
- Dual heat⤠zones:⢠select inner,â outeror both for cookware-size versatility.
- Compatibility: check terminalâ type, mounting hole âpatternand â˘rated wattage/voltage before replacement.
- Common âsymptoms: uneven heating, openâ coil (no âcontinuity), visible breaksor intermittent operation⢠under control load.
Performance â¤requirements for a replacement element focus on⤠electrical âcontinuity,⤠ratedâ power densityand mechanical fit. A â¤technician will verify the WB16K10026 GE⢠Oven range Stove Cooktop Double⢠Burnerâ by measuring â¤cold resistance across theâ terminals (expecting a low-ohm value consistent⢠with theâ range’s wattage),inspecting terminal tightness and insulation,and âconfirming âŁthat the elementâ reaches stable temperature under âtypical supply voltage without drawing excessive current. In practical â¤service scenarios, replacing the element with the âcorrect part â˘number or âa verifiedâ equivalent resolves issues such as â˘localized hot âspots or âfailureâ toâ maintain âset heat; âadditionally, matching the element’sâ thermal response âcharacteristics to the âŁcontrol strategy (infinite switchâ versus⣠electronic⢠modulation) ensuresâ consistent user-controlled power steps and safetyâ cutoutsâ operate as intended.
| Item | Description |
|---|---|
| Element zones | Inner âŁand âouter coils provide selectable âheatingâ areas for small or large⢠cookware. |
| Electrical checks | Measure continuityâ and cold resistance; compare to range specifications⣠to confirm wattage âŁclass. |
| physical fit | Verify terminalâ type,⣠spacing, âand⢠mounting bracket dimensionsâ for â˘correct installation. |
How⢠the WB16K10026 âGE âOven Range Stove âŁCooktop Double Burner Works âInside âŁthe Appliance: Internal Components, Electrical âInterfacesand âHeat Transfer pathways
the WB16K10026â GE Oven âŁRange Stoveâ Cooktop Double Burner is a âŁresistive âŁsurface element⤠assembly that converts supplied mains power⤠into âheat⤠through a â¤coiled heatingâ conductor mountedâ inside a stamped metal cup and insulated by ceramic or mica supports. Internally the âassembly consists of âŁthe resistiveâ coil,â terminal â¤lugsâ that mate with⣠the âcooktop wiring harness, anâ element mounting cup⢠or pan âthat⤠forms the⢠heat-transfer and mechanical⢠interface to âthe cooktopandâ in some âinstallations a âthermal limiter or sensor that provides overtemperature protection. The electrical interface⢠is âŁsimple: the element connects to the range control â(typically an infinite switch â or⤠electronic relay) via the cooktopâ terminal block; the control modulatesâ voltage or duty cycleâ so the âcoil produces the required wattage.For âŁpractical compatibility, a âŁreplacement element must match âthe mounting flange, terminal type and orientationand âthe â¤wattage/voltage rating of the original assembly⤠to ensure âproper fit and safe â˘operation in the appliance.
- Resistive coil: source of heat,⢠insulated by ceramicâ spacers.
- Terminal lugs: provide low-resistance⣠connection to theâ cooktop âcontrol and wiring⤠harness.
- Mountingâ cup/pan: transfers heat toward the cooktop surface and secures â¤the element.
- Overtemperature âŁlimiter/sensor (if present): interrupts power on unsafe thermal conditions.
- Control interface: infiniteâ switch or relay supplying âmains voltage and â¤duty-cycle âcontrol.
Heat transfer from the coil⣠to⢠cookware occurs âprimarily by conduction throughâ the element mounting and⢠cooktop surface, withâ additional losses by radiation and convection;â this explains residual heat after⣠power is removed âand why⢠secure mechanical contact and a clean⤠surface improveâ thermal âefficiency. typical⤠operational failures include â˘open coils (no âŁcontinuity),â intermittent connections at corroded lugsand shorts to⤠the chassis; diagnostics â¤use a multimeter â¤toâ verify continuity across the element and⢠to check⤠for leakage to groundand a visual âinspection âof the terminals and mounting cup for⣠deformation or overheating. When replacing⣠or troubleshooting a WB16K10026 â˘GE â¤Oven Range Stove âŁCooktop âDouble Burner, confirm the element’s terminal âlayout and âwattage⢠ratingand verify that âŁtheâ range control⣠supplies the correct line â¤voltages before assuming the element is defective.
Common Failure Symptoms, Diagnostic⢠Measurementsand Root-Causeâ Indicators for the Cooktop⢠Double Burner
The WB16K10026 GE Ovenâ Range Stove⤠cooktop Double⤠Burner is a concentric, dual-circuit surface⣠element assembly designed to deliver selectable inner or outer-ring heating on âcompatible GE ranges. âEach ringâ is drivenâ independently through the range’s infinite⤠switch or relay, âso failure modes frequently enough appearâ as a single-ring loss (innerâ or outer only), reduced âheat output,⣠or âintermittent⣠operation. Visual indicators include warped or broken âcoil sections, âdiscolored or overheated terminalâ fittings, âand separation at âthe element-to-terminal⢠joints; electrically, the element should present low resistance⢠on a cold continuity check and be isolated⢠from the chassis except where⤠a dedicated ground is present âŁby design.
- No heat on one ring while⤠the other ring works – often⤠an open element segment or broken internal connection.
- Weak or uneven heat – elevated element âŁresistance from partial breaks⤠or degraded alloy; or a failing infinite⢠switch⢠producing reduced current.
- Intermittent heating -â lose⣠terminal,corroded connector,or intermittent âswitch âŁcontact.
- Tripped breakers or blownâ fuses⤠when â¤element selected â- possible short toâ chassisâ or shorted insulation at⢠a terminal.
Techniciansâ should perform the followingâ checksâ with powerâ removed: measure continuity â across each⢠ring segment and between each terminal and â˘chassis âto detect â¤opens or shorts to ground,and with the element connected⢠and the circuit switched on,measure line âvoltage at the âŁelement terminalsâ to confirm the controlâ is supplying power. A true open (infinite ohms) on a ring indicates an internal⤠fracture and requires replacement of the⣠WB16K10026 âŁassembly; a present line voltage with no continuity⣠points⢠to the â¤element âitself,â whereas absenceâ of line voltage⢠suggests an infinite switch, wiringor terminal-block⢠fault. âThermal âŁfatigue, repeated overheat âcycles, âand oxidized or loose terminal connections are common root causes that match⢠these âdiagnostic measurements âand the symptom patterns⤠listed below.
| Item | Description |
|---|---|
| Open element | Infinite resistance on⢠continuity test; âouter orâ inner⣠ringâ will ânot heat⤠and requires âŁreplacement. |
| Short⤠toâ chassis | Low â˘resistance between elementâ conductor and chassis;⢠may trip protection and âŁindicates insulation â˘breakdown or damaged âŁterminal. |
| High resistance /â degraded alloy | Elevated âohms causingâ reduced heat; manifests â˘as slow boil or uneven temperature⢠across â¤ring. |
| Intermittent⤠connection | Intermittent continuity and variable heating; typically due to loose/corroded terminals or a failing switch. |
Compatibility, Replacement Considerations, Installation Proceduresand Troubleshooting Guidelines for WB16K10026 on GE Range Models
Theâ WB16K10026 âŁGE Oven Range Stove⢠Cooktopâ Double âBurner is a replacement surface heating elementâ designed for coil-style GE ranges that use concentric heating â¤zones. â¤Functionally,theâ part provides two selectable âheating areas â(inner â¤and outer rings) so a single control can vary the effective heating diameter and power â˘delivered to cookware.Compatibility depends⢠on mechanicalâ mounting,terminal spacing⢠and type,and electrical ârating: âthe element must match the â¤original â¤part’s bracket locations â˘and terminalâ orientation (typically â˘insulated spade connectors) and âmust be rated for the same circuit⤠and switchâ arrangement. This part is not compatible â˘with sealed glass-ceramic radiant cooktops or non-coil heating systems; confirm fit by comparing the existing element’s physicalâ mounting and the oven range service manual or âmodel parts list before ordering.
Replacement âand troubleshooting⢠require basic electrical checks⤠and safe disassembly procedures. Before servicing,shut off âpowerâ at theâ breaker â˘and verify zero voltage â¤at âthe âŁcooktop âterminals with â¤a multimeter; then⢠remove the burner âand inspect for âopen circuits,shorted⣠rings,or visible âdamage. Typical⤠troubleshooting steps âincludeâ continuity⤠and resistance⣠checks acrossâ inner and outer⤠ring terminals, verifying the surface control switch operates both zonesand confirming proper contact at âspade terminals.If a burner exhibits intermittent heating âor âonly one ring works, replace the element only after âconfirming the control switch and wiringâ are functioning; if multipleâ components fail, âreplace â˘theâ burned element and retest â¤the switch and wiring harness for continuity and proper voltage under load.
- Safety first: âdisconnectâ powerâ and discharge any capacitiveâ components before touching terminals.
- Inspectâ terminal type and spacing; measure resistance across ârings⣠to detect open circuits.
- When â˘installing, align⣠mounting bracketsâ and fully⢠seat spadeâ connectors to prevent arcing.
- After replacement, perform â˘a functionalâ test on each ring â˘and verify no excessive current draw.
| Item | Description |
|---|---|
| Connector type | Typically insulated spade terminals; confirmâ orientation and number of terminals match the original part |
| Mounting | Bracket locations andâ element diameter âmust⤠match⢠the cooktop cutout and⤠support clips |
| Testing | continuity and resistance checks across inner/outer rings; âcompare âto âŁexpected values in service manual |
Q&A
What is theâ WB16K10026 and what doesâ “double burner” mean?
The WB16K10026â is an⤠OEM GE replacement surface⣠heating element (cooktop burner) â¤described⣠as a “double” or â”dual” burner.â That means â˘it has âtwo â¤concentric heating rings (inner and outer)â so you can use either a â˘smallerâ or âlarger cooking zone depending on the pan size. It âis used⣠onâ electric ranges â¤/ cooktops,⤠not on gas models.
Which GE⢠ranges and model numbers is⤠this part compatible âwith?
This part âis intended⢠for specific GE â¤electric ranges and cooktops. Compatibility depends on model andâ year, so always verify by checking âyoru âappliance model number⤠(usually on a tag behind theâ oven door or on the back of the unit) against the part number in GE’s⢠parts âlist or an authorized parts distributor.Doâ not rely on visual match alone – confirm compatibility âŁbefore purchase.
What are â¤common symptoms that indicate the WB16K10026 needs replacement?
Typical⢠signs include one or bothâ rings ânot heating, unevenâ heating (hot spots), visible damage such as cracks or breaks, the element glowing⢠intermittentlyorâ a tripped breaker when the burner is turned on. In some âcases âthe element may show âcontinuity âbut still fail to heat properly due to internal partial shorts or poor terminal connections.
How do I test the doubleâ burner to⣠determine if it is faulty?
First,disconnect power â˘to the range. â˘Remove the â¤element per the service instructions and visually inspect terminals⢠and wiring.Use a multimeter set to continuity or resistance (ohms): check for continuity between⣠the element âterminals – there should be continuity; an openâ circuitâ indicates⢠a failed element. Also⣠checkâ for shorts â¤between each terminal and the element âbody/ground; âthere⢠should be no continuity to ground. If â¤the element passes âthese tests but still âmalfunctions, test the infiniteâ switch and wiringâ for proper â˘voltage and â¤connections.
How do I replace the WB16K10026 safely and what tools are required?
Safety first: â¤disconnectâ power at the breaker â˘panel. Typicalâ tools include a screwdriver, nut driver,⣠and possibly pliers. Pull the cooktop âor⣠lift the range⢠access â¤panelâ as ârequired to access theâ element terminals.Disconnect the wiringâ from the old element (note terminal positions or take a photo), âŁremove mounting hardwareand install the new⣠element in the reverse order.â Reconnectâ wires to the correct â¤terminals, secure the element, restore powerand test. â¤Followâ the âfactoryâ service⣠instructions for your model forâ detailed steps.
After â˘installing a new âWB16K10026 the burner still won’t heat – what should I check?
Ifâ the newâ elementâ does not heat, re-check that power wasâ restored and the correct breaker is on. Verifyâ wiring connections at âthe element⤠andâ at the range switchâ (infinite/range⢠switch).Use aâ voltmeter (withâ power âon) to confirm â˘240â Vâ is âpresent across⢠the element terminals âŁwhen the burner isâ turned on. If⢠voltage is present âand the element still â¤does not heat,the replacement may⣠be defective. If voltageâ is absent, the problem is â˘highly⣠likely the infiniteâ switch, wiringor control⤠board.
Are there aftermarket alternatives, âand is âthere âany⣠disadvantage âtoâ using ânonâOEM â˘elements?
Aftermarket elements⤠are â˘available, but⢠quality⤠and fit can vary. OEM parts⤠are made to the⣠manufacturer’s specifications for fit, performanceand safety.â if using an â˘aftermarket element,⢠verify dimensions, âterminal type, wattage and voltage⢠rating match the⣠original.⢠Poorly âmatched elements can cause overheating,⤠fitment problemsor reduced lifetime. Using ânonâOEM parts may also affect warranty coverage.
Is there âŁany maintenance to prolong the⢠life of the double burner?
Keep â¤the⢠element and⤠cooktop surface clean-spills âshould be wiped up promptly once âthe surface has cooled. Avoid dragging âŁheavy âcookware across⢠the element or banging cookware on⢠the element terminals. do not âŁuse cookware muchâ larger thanâ the outer â˘ring for âextended periodsand avoidâ operating the âelement empty atâ high settings. âŁProper use and cleaning reduce⢠thermalâ stress and help extend elementâ life.
In Retrospect
The WB16K10026 double burner for GE oven ranges serves as a⢠critical heating âŁcomponent thatâ directly âaffects cooking performance,⣠temperature consistencyand overall appliance reliability. As theâ interface between the⢠appliance’s electrical supply and âthe⤠cookware, this element plays an â¤important ârole in ensuring⣠even âheat distribution, efficient âŁenergyâ useand predictable âcontrol responseâ during everyday cookingâ tasks.
As â˘symptoms of aâ failingâ burner can be similar to other electrical or⢠control âissues, accurate⤠diagnosis âis essential before replacing parts. Identifying the root cause-whether theâ burner element itself, âŁa terminal, wiringor a control module-helps avoid unnecessary expense and ensures the problem isâ resolved effectively. When replacement is required, selecting â¤the⤠correct OEM⤠part number andâ confirming⢠compatibility with â˘the specific⤠range model supports safe and reliable operation.
Professionally diagnosing and, when necessary,⢠replacing the WB16K10026 element helps restore appliance âperformance,â maintain safety⤠standardsand⣠extendâ the useful life of the range. Engaging â˘qualifiedâ service personnelâ or following manufacturer guidance for installation and testingâ minimizes risk and delivers the most cost-effective⣠outcomeâ for homeowners and⢠service providers alike.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
