240338001 âFrigidaire â˘Refrigerator Gallon Door Bin is a âmolded polymer storage bin designed â˘to attach â˘to the⤠interior âŁof a refrigerator âdoor and accommodate large containersâ such as gallon jugs. Itâ is indeed a passiveâ mechanical component-typicallyâ injection-molded plastic-formed with â˘mounting tabs or clips that âengage the door â¤liner and a shaped shelf surface that supports stored items. The â¤piece is intended for use in compatible âŁFrigidaire door⤠assemblies where it⣠provides â¤organized storage capacity⢠and predictable load-bearing â¤behavior.
Insideâ the â¤appliance, the gallon âdoor bin interfaces mechanicallyâ with the door âŁliner, âŁmounting clipsand occasionally with â˘retaining rails or seals; it does not contain electrical or refrigerant-carrying parts. Its primary role is toâ securely restrain tall containers⤠during door operation, distributing static â˘and dynamicâ loads to the door structure and helping toâ prevent container movement⤠that could â¤impede proper door closure or damage other components.Improperly secured, crackedor deformed bins can changeâ loadâ paths on theâ door hinges and seals, so understanding⣠their mounting geometry âand material âproperties is important forâ diagnosing door sag,⢠seal gapsor abnormal wear.
In the article â˘you will find a technical review of⣠the part’s functionâ and common design variants, guidance on model âcompatibility and how to verify fitment, typicalâ failure symptoms (for⢠example cracked mounting⣠tabs, saggingorâ interference with door closure)and âstep-by-stepâ troubleshooting checks to isolate âa bin-related âissue.⣠The⣠article will also cover practical⤠replacementâ considerations-how to confirm âOEM versus aftermarket fit, âŁwhat measurements and fastening details to verifyand basic installation notes relevant to a technician,⣠engineeror appliance âowner preparing to repair or replace âthe bin.
Tableâ of Contents
- Functionâ and Role of the â˘Gallon Door Bin in Frigidaire Refrigerator Door Assemblies
- How the 240338001 â¤Frigidaire Refrigerator Gallon â˘Door Binâ Interfaces with Mounting Clips, Door Sealsand Load â˘Distribution
- Common Failure Symptoms, Wear âPatternsand âVisual Inspection Criteria for the Gallon Door bin
- Replacement Considerations, â¤Compatible Frigidaire Models, â˘and StepâbyâStep Installation â˘Procedure with Diagnostic Checks
- Q&A
- To âŁWrap it Up
Function and Role â˘of the Gallon â¤Door Bin in frigidaire Refrigerator Door Assemblies
The 240338001 Frigidaire âRefrigerator âGallon Door Bin functions as a load-bearing storage module integrated into⢠the refrigerator door assembly to⤠secure tall containers âsuch as gallon milk jugs and large⢠beverage bottles. It is indeed molded⤠to engage specific âdoor peg patterns âand retentionâ clips so that lateralâ andâ vertical⢠forces âfrom âstored items â˘transfer⣠into âtheâ door frame rather than theâ liner; correct engagement of the bin’s⣠mounting tabs preserves door geometry and helpsâ maintain the gasketâ seal when the⤠door isâ closed. âIn â˘practical terms, this bin controls container movement during door opening/closing and resists tipping under normal use, âso installers should verifyâ pegâ spacing â˘and clip orientation toâ confirm compatibility⤠with âŁa âgiven Frigidaireâ door panel â¤before âreuse or replacement.
- Capacity/function:â supports one or more largeâ beverageâ containers and limits lateral movement.
- Mounting: snap-in retention tabs⢠that align with door peg pattern; proper seating is required to avoid âstress on âhinge âandâ gasket.
- common failure modes:⣠cracked âŁmounting âtabs,â material creep from⢠heat âexposure, âandâ surface â¤wear that reduces âgrip.
Technicians troubleshooting door âstorage issues should inspect the binâ for visible damage⣠atâ the âpeg⣠interfaces and perform a simple load test: âseat⣠the binâ fully, place âŁa representative containerand operate the door to âŁobserve stability and seal behavior. A damaged âor improperly seated 240338001â bin⢠canâ allow⤠containers âtoâ shift and âstrike theâ door gasket or prevent the door from closing squarely,which may lead âto higher compressor run time and temperatureâ variance. â¤When replacing the bin, confirm âthat replacement dimensions and peg geometry match the original; if available,â use the OEM âpart to ensure⤠correct mechanical âfit âand âpredictable performance within the door assembly.
| Item | Description |
|---|---|
| Material | Moldedâ thermoplastic designed⣠for low-temperature durability and repetitive load cycles |
| Mounting interface | Snap-in tabs/pegs that⢠align with Frigidaire door âliner pegâ pattern |
| Typical service action | Inspect/replace âif mounting tabs are cracked âor if bin allows excessive movement underâ load |
How the 240338001 Frigidaire refrigeratorâ Gallon Door Bin interfaces âwith Mountingâ Clips,Door âSeals,and⢠Load Distribution
the 240338001 Frigidaire Refrigerator Gallon Door Bin connects to the door⤠by seating its molded hinge tabs into âpurpose-built mounting âclipsâ or continuous rail channels molded into the âdoor inner âliner.The⢠engagement isâ a press-fit/friction interface: â˘theâ bin tabs insert into clip recesses and are retained axiallyâ while âŁstill permitting a controlled pivot for âloading and removal. âProper seating positions the bin against âa shelf-stop to prevent forward travel and ensures âtheâ doorâ gasket âcompressesâ uniformly aroundâ the door perimeter rather than⤠being âlocally⤠distorted by the bin.Variantsâ of â¤Frigidaire âdoor designs⢠use⢠either⣠discrete snap⣠clips âor longitudinal rails;â compatibility âŁdepends âon tab spacing, tab âŁthicknessand clip geometry rather than cosmetic appearance.
Loads applied to the⣠bin are âtransmitted through the âtab-to-clip⤠interface â¤into theâ door structure, concentrating shear and bending stresses atâ the clip attachment points. A filled gallon jug â˘weighs roughly 8.3-8.6 lb (3.8-3.9â kg),so typicalâ design intentâ is for⢠single-gallon loading and âŁlight condiments;⢠stacking several âfilled gallons â¤or âplacingâ concentrated heavy⤠objects increases⢠plastic creep âandâ clip fatigue,which can cause bin âtilt,partial disengagement,or⢠a localized â¤reduction in door-seal compression that raises air â˘leakage.inspect for symptomatic â˘signs-bin sag, an uneven gasket gapor creaking on â˘opening-and address them by reseating â˘the tabs, âreplacing cracked clipsor redistributing heavyâ items to interior⣠shelves to reduce âmoment loads on the door bin interface.
- Compatibility check: confirm â˘tab spacing⢠and thicknessâ match the doorâ clips⣠or rail before âinstallation.
- Common symptoms of interface failure: binâ tilt, loose fit, audible movementand âuneven âdoor-gasket âcompression.
- Corrective actions: âreseat tabs, replace brittle or cracked clipsor relocate heavy items âto interior shelves.
- Practical handling: remove loadâ before pivoting bin down to reduce stress on clips during service.
| Item | Description |
|---|---|
| Mounting âŁinterface | Molded hinge tabs â¤that press-fit into discrete clips or continuous door âŁrails. |
| Typical single-load | One filled gallon â â8.3-8.6 lb (3.8-3.9 kg); avoidâ multiple filled gallons on one bin. |
| Failure symptoms | sagging bin, partial disengagement, noisy operationor localized door-gasket â˘gaps. |
| Maintenance | Inspect âtabs and clips âfor cracks, reseat during⤠installation, â˘replace â¤clips if deformed. |
Common failure Symptoms, âwear âŁPatterns,â and Visual Inspection Criteria for theâ Gallon Door â˘Bin
The 240338001 Frigidaire Refrigerator Gallon Door Bin â˘is⣠a⢠molded thermoplastic shelf âdesigned to âretain large containersâ on the âinner door while⣠interfacing⤠with the âŁrefrigerator’s rail and clip geometry. Functionally it transfers âtheâ static â˘andâ dynamic loads âŁof filled jugs to âthe doorâ frame through molded mounting tabs and engagement â¤lips; âtypical materials are impact-modified ABS or â¤polypropylene âselected for low-temperature toughness. Compatibility isâ determined by the⤠spacing and profile of the âdoor rail, the tab thicknessand the bin’s overall widthâ and⤠depth-technicians âshould verify clip spacing and tab orientation against the cabinet door before replacement to ensure⣠correct mechanical engagement and clearance â¤for âŁdoorâ seals and shelving above or belowâ the â˘bin.
Common â˘failure modes are⤠mechanical-fractures at mounting tabs orâ stress concentrations in âmolded â˘ribs, âŁpermanent deformation (creep) of the frontâ lip from repeated⢠heavy loads, âandâ surface embrittlement from long-term cold exposure. Functional⣠symptomsâ that indicate replacement are sagging under load, intermittent disengagement from⢠the â¤rail, audible rattles⤠during door movementor an âinability to retain a standard full-gallon container (â3.8 â˘L).inspect visually for hairline cracks radiating from âclip holes, stress whitening along load⢠paths, missing or⣠shortened â˘tabsand âasymmetrical âwarpage âthat â¤prevents â˘full seating; a â¤simple load testâ using a full â¤jug while observing for â¤downward⣠deflection and â˘secure tab âengagement â¤often⤠reproduces the failure condition for verification.
- Cracks at mounting tabs or alongâ rib intersections – look for⤠propagation toward the lip or clip hole.
- Permanent set/warpage â-â frontâ lip does âŁnot align with seal or lowerâ door âshelf.
- Loose fit or rattling – indicates worn clip âinterfaces or fracturedâ retaining features.
- Surface stress whitening or brittleâ fractures – common after long-term cold exposure and impact.
| Item | Description |
|---|---|
| Mountingâ tab | Check for âfull length, no fracture lines,⣠and proper thickness to engage rail clips. |
| Rib and lip integrity | Inspect molded ribs for âcracks and the front lip for⢠deformation that affects retention. |
| Functionalâ fit | Confirm engagement by seating the âbin and applying aâ loaded⢠gallon toâ observe âdeflection⣠and âŁretention. |
Replacement Considerations, Compatible Frigidaire Modelsandâ StepâbyâStep âInstallation Procedure with Diagnostic âŁChecks
240338001 Frigidaire Refrigerator Gallon Doorâ Bin is a⤠molded door-storage component engineered to support gallon-size âcontainers and â˘organize door-mounted storage. The bin uses snap-fitâ posts that âŁengage moldedâ receptacles in âthe⢠refrigerator door rail; load is transferred⤠to âŁthe door structure through these posts, so damage âtypically occurs at âŁthe receptacles or⣠clips rather than the â˘bin âbody. Functionally, the bin must seat flush â¤with âŁthe door profile⣠to avoid gasket interference and⣠to maintain proper door sealing; a correctly fitted âbin willâ notâ impede⣠door closing andâ will⣠remainâ stable under normal loading conditions.
Replacement requires visualâ verification⢠of rail geometry âand â¤post receptacles against the service parts diagramâ or part âcross-reference â¤to confirm compatibility with⣠the refrigerator âŁdoor. Typical âŁinstallation âsteps are straightforward: remove stored items and âthe â˘old âbin,â inspect and if needed⢠replace âdamaged âŁclips or rail inserts, install the replacement bin until both postsâ audibly â˘engage, then perform⣠diagnostic checks such as a manual load test and â˘a door-close testâ to â˘confirm no binding or⣠gasket deformation. The âfollowing checklist⣠and âreference table â¤summarize common installation actions and technical attributes⢠to âhelp technicians and appliance owners complete âthe âreplacement reliably.
- Remove⤠contents and disengage the old bin by flexing âto releaseâ snap posts.
- Inspect door rail, post receptaclesand⤠gasket for cracks, wearor foreign debris.
- Seat⤠the new bin fully âuntil both mountingâ posts âclickâ into place;⢠verify even seating along the lip.
- Perform âdiagnostic checks: load bin with typical items, â˘close door to confirm gasket sealingand checkâ for unusual⣠noise or interference.
| Item | Description |
|---|---|
| Part number | 240338001 |
| Material | ABS plastic (rigid, impact-resistant) |
| mounting | Snap-fit dual post to door rail; âŁverify receptacle condition |
| Function | Support gallon-size containers and organize door storage |
| Compatibility | Doorsâ using standardâ Frigidaire snap-in bin rails – âconfirm with âŁmodel-specific parts âlist |
Q&A
What⣠is âŁpart 240338001 for Frigidaire âŁrefrigerators?
Part 240338001 is aâ replacement ⤔gallon” door bin⢠(door shelf) designed âto mount on âŁthe inside âof a refrigerator door. It is the⣠molded plastic shelf that⢠holds tall containers suchâ as â˘milkâ or juice jugs.It âŁis indeed â˘soldâ as an OEM Frigidaire replacement part and⣠is intended to match the factory fit and function of the original door bin.
Which refrigerator â¤models is⣠240338001⤠compatible with?
Compatibility varies by model year and âŁdoor âdesign. This part is used on a number of Frigidaire and some kenmoreâ refrigerators, but not every Frigidaire door uses the same bin. Always verify â˘compatibility by checking yourâ refrigerator’s model number (found on⤠the interior âwall⤠or⢠door âjamb) against the part listing on Frigidaire’s â˘parts site âor a trusted parts âdiagram. If in doubt, compare the mounting tab spacing and âoverall bin dimensions to the original.
How do I remove the⣠old door binâ and install⢠part 240338001?
Typical removal:â empty the⢠bin, lift⤠the bin up âslightlyâ to disengage âthe lower mounting tabs, âthen pull the⣠bottom away âfrom theâ door and remove. Installation is âthe reverse: engage the bottom tabs âinto the door rail, position the âtop tabsâ or hook, thenâ push theâ top of the⢠bin into place until â¤it snaps in. Useâ even, gentle pressure-don’t forceâ it â¤if⣠it feels misaligned. âŁIf âyour door â˘has a trim piece or âliner that blocks access, consult the refrigerator’s service manual⤠before âremoving additional components.
Will this bin actually holdâ a one-gallon milk âjug?
Yes-âgallonâ âŁdoor bins⤠are shaped and sized to accept⣠standardâ one-gallon âjugs, but actual fit⢠depends on your refrigerator door’s âŁinterior width⢠and theâ bin’s⤠lip â˘height. â¤If you have an unusually wide or tall jug⢠(or a âŁjug with an oversizedâ handle),â measure the âdoor opening and compare it toâ the replacement bin’s âŁusable width⣠and âdepth before purchasing.
What material is the 240338001 âbinâ made of and âŁcan it be washed in a dishwasher?
Theâ bin is made from durable molded plastic designed for fridge use. Most of these âbins are best cleaned âby⢠hand withâ warm water and mild detergent. Avoidâ very hot water, abrasive cleanersor scouring âpads â¤that can scratch or â˘weaken theâ plastic. â¤Dishwashers can⤠expose the part to high heat âŁand harsh detergents that may âwarp orâ cloud the plastic,so hand âwashingâ is recommended unless âthe â¤manufacturer⢠explicitly states dishwasher âsafety.
Why won’t the replacement bin snap into â˘place or why is âit looseâ after installation?
Common⣠causesâ include misalignedâ mounting tabs,â a different mounting rail pattern (part mismatch),⤠or broken/ worn tabs on the door orâ theâ bin.Inspectâ the mounting surfaces for cracked or missing clips and compare⢠the new bin’sâ tab spacing to â¤the original. If theâ door’s tabs are damaged you âmay need replacement clips or a different part number. Avoid forcing the âŁbin-this can âbreak tabs âand make the problemâ worse.
Whereâ can I buy â¤a genuine 240338001 and how â¤do âI verify it’s authentic?
Genuine OEM parts are available from Frigidaire’s âofficial parts website, authorized dealersand â˘many appliance parts retailers. To verify âauthenticity, buy âfrom reputable sellers, check that âthe part number on the⤠listing and⣠on âŁthe part itself matches âŁ240338001and look for OEM â¤packaging âor⢠documentation.If buying from a marketplace, reviewâ seller ratings and return policies.
Can I use an aftermarket⢠replacement instead of the OEM⢠240338001â and are there trade-offs?
Aftermarket bins may be less âexpensive and can fit properly, but quality âand fit âcan â˘vary. âTrade-offs includeâ potential differences in â¤plastic thickness, clarity, mounting-tab âgeometry, â˘andâ long-term durability. OEM âparts are intendedâ to â¤match factory âfitâ and finish and often carry a parts warranty. If you â¤choose⣠an aftermarket bin, verify return âpolicy, check â¤dimensions âandâ tab configurationandâ read âreviewsâ to âreduce the chance âŁof a poor fit.
To Wrap It â¤Up
The 240338001⣠Frigidaire Refrigerator Gallon Door â¤Bin serves a straightforward but essential role⣠in â¤refrigerator organization and⢠functionality. Designed to secure larger containers such as âgallon jugs,this door⣠bin maximizes usableâ storage space,helps prevent⤠spills⢠and shifting during door movement,and contributes âto efficient⣠interior organization. As â˘a component engineeredâ to interfaceâ with specific Frigidaireâ models, it helps maintain the intended layout and âusability of the door shelving system.
properâ diagnosis is critically⢠important⢠when theâ door bin⢠shows â˘signs âof âŁdamage or wear-such as cracks, deformation, loose mounting tabs or⤠an âinability⣠to hold items âŁsecurely-as⣠these â˘issues can reduce storage efficiency and increase the risk of spills or â¤further damage to the refrigerator door.⤠Verifying⤠compatibility âwith the refrigerator model and inspecting adjacent parts (shelves, mounting tracksand âclips) helps determine whether the bin alone requires replacement or whetherâ additionalâ repairs are⣠necessary toâ restore full⣠function.
When⤠replacement âisâ required, â¤selecting the correct part and followingâ manufacturer âguidance or a â˘professional âtechnician’s instructions ensures a secure fit â¤andâ reliable performance.⤠Timely, appropriate replacement helps maintain appliance usabilityâ and safety while⢠avoiding improvised â˘fixes that could causeâ additional damage. responsible disposal âŁor recycling of⣠the â¤old âbin should also be considered âin⣠accordanceâ with localâ regulations.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
