Teh⤠134156200 Frigidaire Screw is a manufacturer-designated fastener used âŁin Frigidaire⤠appliances; it is a mechanical component rather than an active electrical or electronic part. As a screw intended for assembly and retention, it’s defining characteristics include thread form,â length, head styleand material/coating, which together determine how it mates with sheet metal, threaded inserts,â orâ captiveâ nuts withinâ an appliance chassis.
Inside an appliance the 134156200 screw performs âa structural â˘and mechanical role, holding panels, brackets, âŁcontrol modulesor assemblies in proper alignment⣠and maintaining electrical⢠groundingâ or conductive contact where âspecified. It interacts with structural subsystems (cabinetry, mounting frames), thermal subsystems (where differential expansion can affect preload and sealing)and electricalâ subsystems when used to secure ground points or attach components that require a stable electricalâ reference.â Proper selection and installation affect vibration resistance, sealing against moisture or detergentsand the ability to maintain torque over temperature cycling.
This article will describe the screw’s intended function⢠and the technical context needed to identify compatible replacements,list common failure symptoms⢠(loosened or backed-outâ screws,stripped threads,corroded or fractured heads,and loss of grounding),and provide practical troubleshooting steps such as âvisual inspection,torque verification,and thread- and insert-repair options. It will âŁalso cover replacement considerations including matching thread pitch and length,⢠material and coating⢠for corrosion resistance, recommendedâ torque ranges and fastening practiceandâ safety precautions to follow⢠during service.
Table of Contents
- Function and Role of the Screw within Frigidaire Mechanical Assemblies
- How the 134156200 Frigidaire Screw Works âInside the Appliance
- Common Failure Symptoms and Wear â¤Patterns âŁof the 134156200 Screw
- Replacement Considerations, Compatible Models and Installation Procedures
- Q&A
- To⤠Conclude
Function and Role of the Screw within Frigidaire Mechanical Assemblies
The 134156200 Frigidaire Screw serves as an âOEM fastener âŁwithin Frigidaire mechanical assemblies, providing the clamping preload and shear resistance necessary to hold sheet-metal panels, bracketsand component housings together under vibration and⣠thermal cycling. As a threaded machine screw, its primary role is to create and â˘maintain a compressive joint between mating parts; proper engagementâ length and thread fit determine whether the joint resists loosening or concentrates stress⤠that can lead toâ fatigue. In many service situations this screw is used to secure control housings, hinge platesor internal trimâ where repeatable alignment and electrical grounding continuity are required, so compatibility with the mating nut or tapped boss is critical for reliable performance.
Technicians should treat the screw as a precision-fit component rather than a generic â˘fastener: evaluate thread condition, head drive type, material finishand whether a locking compound or captive washer is part â¤of the original assembly before replacing it. Common failure modes that affect function include stripped threads in the tapped boss, a sheared or rounded head from âincorrect driversand corrosionâ that reduces clamping force; replacing â¤the screw with an identical OEM â¤partâ or an equivalent grade and âfinish reduces risk. For field repairs, clean mating threads, verify full thread engagement,â and follow the appliance manufacturer’s torque or fasteningâ sequence to avoid overloading adjacent âplastic parts or deforming thin sheet metal.
- signs to⤠inspect: stripped threads, loose â¤or rattling panels, visible corrosion, âbroken or rounded head
- Installation checks: correct head/drive type, full thread⤠engagement, proper finish for corrosion resistance
- Replacement guidance: match OEM material/grade and use specified locking method if âpresent
| Item | Description |
|---|---|
| head/Drive | Matches original (e.g., Phillips, Torxor hex) to avoid camâout and head damage |
| Material/Finish | Steel with corrosion-resistant plating or stainless steel depending âon location |
| Function | Provides clamping force, shear resistanceand often grounding or alignment |
| Typical Application | Mounting trim, brackets, housingsand hinge assemblies⤠inside Frigidaire appliances |
How the 134156200 Frigidaire⢠Screw Works Insideâ the Appliance
The 134156200 Frigidaire Screw functions as an engineered fastening element that secures panels, bracketsand⣠internal assemblies while also â˘providing mechanical alignment and, in some locations, a reliable grounding point for electrical continuity. In practice this screw engages either sheet-metal threads or a âmating nut/captive insert, soâ its effective performance depends on correctâ thread profile, length and head style for the application. Material and⣠finish (commonly plated steel or stainless in appliance service) determine corrosion resistance and torque tolerance; these mechanical characteristics govern how the screw responds to vibration, thermal cyclingand repeated servicing inside the appliance.
Technicians should âŁexpect the screw toâ resist shear and loosening under normal operating loads but⢠to fail by⢠thread stripping or fracture if overâtorqued or crossâthreaded; using the correct OEM part maintains original clamping forceâ and avoids misalignment of⢠components such as âŁcontrol boards or door assemblies.â For routine repair andâ troubleshooting,confirm that the replacementâ screw matchesâ the original âin thread engagement and length⤠and consider a low-strength threadlocker or⣠a locking washer only in⢠highâvibration locations. practical examples include replacing âa stripped screw that causes a loose control panel â˘(intermittent switches) âor verifying that aâ chassis screw provides continuity âfor an appliance ground path during safety testing.
- Common symptoms of a failing or incorrect screw: loose panels or brackets, intermittent electrical grounding, stripped threadsand vibration-induced loosening.
| Item | Description |
|---|---|
| Application note | Replace with equal thread⤠type and length; match material/finish for corrosion and electrical requirements. |
Common Failure Symptoms and Wear Patterns⢠of theâ 134156200 Screw
The 134156200â Frigidaire Screw is aâ service fastener used toâ clamp small internal components-such as trim âpieces, mounting brackets and control-module housings-against sheetâmetal chassis or molded plastic supports.Its primary function is âmechanical retention and,â in someâ assemblies, to establish aâ grounding â¤path; therefore correct thread engagement, material compatibility and seating against the mating surface determine its behavior⣠in service. Replacement parts must match⢠the original thread form, shank diameter and length to avoid crossâthreading or slack fit;â consult the appliance’s exploded âparts list or service manual for the exact specificationâ rather than relying solely on visual similarity.
- Head rounding or camâout from repeated screwdriver âuse, causing reduced torque transfer and loose assemblies.
- Thread stripping in either the screw or the chassis â˘insert, leading to components thatâ no longer clamp firmly and produce vibration or misalignment.
- Corrosion at the shank or head (galvanic attack where dissimilar⣠metals contact), which can weaken the fastener and increase removal torque.
- shear fractures from excessive lateral loads or impact, observable as a clean break at or below the head.
Technicians typically diagnose 134156200âtype screw failures â¤by inspecting for these wear patterns and âcorrelating them⤠with symptoms such as rattling panels, intermittent electrical grounding, leaks around water fittingsor panels that won’t remain aligned. For practical repair, remove any corroded fastener and⢠inspect the mating thread; if the chassis âŁinsert⣠is âdamaged, repair with an appropriate helicoil or replacement insert rather than oversizing the screw. Use matched material andâ thread form for replacements,apply correct torque per the service manual,and⢠avoid threadlocker or antiâseize unless specified for that application to preserve longâterm serviceability.
Replacement Considerations, Compatible Models and âInstallation procedures
The⢠134156200 Frigidaire Screw is an OEM fastener used to secure interior panels, mounting brackets and small assemblies within Frigidaire appliances. Technically, it functions as a precision machine screw sized to mate with sheetâmetal nuts or molded threaded bosses;â common appliance service practice shows these âscrews are supplied in stainless or zincâplated steel to resist corrosion and maintain âclamping⤠force over⤠thermal cycles. When⢠identifying compatibility, compare âŁthe screw length, thread form (coarse vs. â¤fine), head type (Phillips, Torxor hex) and material against the parts diagram or service manual for the specificâ model âŁ- many Frigidaire families reuse the same fastener across control-panel and doorâtrim locations, but âŁverification by measurement orâ OEM crossâreference prevents mismatches that can cause stripped plastic bosses or poor grounding continuity.
Installation requires correctâ driver selection, controlled seatingand appropriate torque to avoid distortion or⣠stripped threads. Inspect mating threads for damage andâ clean metal interfaces; for steelâtoâsteel joints â¤a removable mediumâstrength threadlocker may be used to reduce vibrational loosening, but â¤avoid anaerobic adhesives on plastic bosses. Typical field practice: handâstart the screw to ensure â¤alignment, tighten with a torqueâlimited driver or controlled wrist forceand replace any screw with deformed threads or a rounded head. If securing parts that serve as electrical ground paths, confirm metalâtoâmetal contact and reassemble in the same order to preserve grounding and sealing integrity.
- Checklist: verify part number/measure â˘length and⤠thread, inspect mating threads, select correct driver, âhandâstart then torque to specification,⣠replace if damaged.
| Item | Description |
|---|---|
| Thread | Appliance machine screw thread; common sizes vary (e.g., 6â32, M4) – confirm by measurement or OEM diagram |
| Head Type | Phillips, Torxor â˘hex – use matching driver to avoid camâout |
| Material | Stainless or zincâplated steel for corrosion resistance |
| Typical Torque | Lowâ torque range for small appliance screws (generally under 20 inâlb; âŁlower for plastic bosses – 4-10 inâlb) |
Q&A
What is Frigidaire part 134156200?
134156200 is⤠a manufacturer⢠part number Frigidaire assigns toâ a specific screw âused âon some of their appliances.The number identifies â¤an OEM fastener (head style, thread form and length) in Frigidaire’s parts database. To know the exact head type and dimensions for your appliance, check â˘the appliance’s parts diagram⢠or the â˘Frigidaire parts⣠lookup for your model number.
where is the 134156200 screw used in Frigidaire âappliances?
The part can be used in a variety of âŁlocations depending on the appliance model (e.g., mounting panels, trim, control boardsor internal components). location varies by model and year; consult the service manual or the parts âdiagram for⢠your specific Frigidaire model to see exactly where 134156200 is fitted.
how can I tell if the 134156200 screw in my appliance is⣠the correct âone or needs replacement?
Visually inspect the screwâ for stripped head, bent or damaged threads, corrosionor broken shank. If the fastener no longer holds components securely, if threads are damagedor if it’s⣠corroded, it should be âreplaced. Verifyâ the replacement by matching⣠the OEM part number (134156200)⣠or by matching the screw’s head style, length, diameter and â¤thread type to the original.
Can I use⣠a generic â¤or aftermarket screw instead of 134156200?
You can substitute with a properly matched screw if âŁyou can match â¤the original’s size, thread pitch (coarse vs.machine), head type (Phillips, Torx, hex, etc.),length,and material/coating. For safety and fit, OEM replacementsâ are recommended. If the screw⢠attaches to safety-critical or sealed components â(gas fittings, door hinges, control boards), use the OEM part âor âŁconsult a âtechnician.
How do I identify the correct size and type if I don’t have the parts diagram?
Remove the screw and measure: the major diameter (in mm or âinches),thread pitch (threads per inch or mm),and overall length.⤠Note âthe head style and driveâ type. Compare those measurements to a screw gauge or take the screw to a hardware store for matching. If you prefer not â˘to remove it,â lookupâ your appliance model⢠on frigidaire’s parts site or contact Frigidaire customer support with your model ânumber.
What tools and âinstallation âtips should I use when replacing 134156200?
Use the correct driver bit to avoid stripping the headâ (Phillips, Torx, etc.). Tighten screws snugly but do not overtighten – sheet metal and plastic parts strip or crack easily. If⣠no torque spec is available, tighten by hand and âŁfinish⢠with a short,â controlled turn using the driver; avoid âpower tools on high âtorque. If theâ screw secures electronic components, disconnect power before working.
Should I use threadlocker or anti-seize on 134156200?
Only âuse threadlocker if specified in â¤the service â¤instructions.A medium-strength threadlocker (e.g., Loctite 242) is sometimes used for â˘vibration-prone screws; avoid â¤permanent/threadlock on screws that âmust be removed during routine service. Anti-seize is generally not used on small machine or sheet-metal screws inside appliances. When in doubt, follow the appliance’s service manual or use the⣠OEM screw without additives.
How do I â˘order an exact replacement for part 134156200?
Search Frigidaire’s official parts⢠website or contact⣠Frigidaire customer support⢠with your appliance model number and the part number 134156200. Authorized â¤parts dealers⢠and appliance âparts suppliers âcan⢠also order OEM fasteners. If the OEM part is unavailable, provide the supplier with the screw’s measured dimensions and head/drive type â¤so they â¤can find a compatible substitute.
To Conclude
The 134156200 Frigidaire screw plays a small but essential role in the structural integrity and reliable operation of theâ applianceâ assemblies in which it is used. As a specific OEM fastener, it helps âŁmaintain âŁproper alignment and secure attachment of components; when intact âŁand correctly installed, it contributes to overall performance, stability and longevity of the âunit.
Because failures or wear of a single â¤fastener can lead to vibration, misalignment âor secondary component stress,⣠careful⣠diagnosis is crucial to⣠determine whether a problem stems from a damaged or âmissing 134156200 âscrew or from another underlying issue.â accurate⤠identification of⢠the part number and assessment of the surrounding components helps ensure that the root cause is âaddressed rather than treating only a symptom.
when replacement is required, using the correct part and proper⤠installation practices preserves fit, function and warranty coverageand reduces the risk of further damage. Ifâ there is âuncertainty about diagnosis â¤or repair, consulting the manufacturer’s service facts or a âqualified technician will help ensure a safe, effective resolution.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
