The 241734001 Frigidaire Refrigerator Ice Bucket is ā£a molded storage and interface component used āin Frigidaire refrigeratorsā¤ to receive and retain harvested ā¢ice ā£from the ā¢refrigerator’sā£ automatic āice maker.As a mechanicalā bin, it provides the physical containment ā£for ā¤ice,ā a mounting platform for auger or dispensing interfaces in models with dispensersand in many designs incorporates features such as level-detection arms or sensor mounts ā¢andā alignment tabs āthat ālocate ā¤the bin ā¤within the freezer cavity.
Functionally, the ice bucket sits between theā ice maker ā¤harvest mechanism and any downstream dispenser or auger drive; it therefore interacts directly ā¤with the ice maker’s āejector assembly, the ā£auger or dispenser motor and drive coupler (when ā¢present),ā¤ and āthe ice-level ā¢sensing mechanism ā£that controlsā production.Properā¤ seating and dimensional fit are critical: misalignment āor ā¤damaged mounting tabs can causeā¤ the āauger to ābind, prevent theā¢ level sensor fromā¤ operating correctly,ā¢ or allow ice bridging that blocks dispensing. The bucketā must also operate reliablyā in a low-temperature,ā high-humidity habitat and withstandā¤ repeatedā mechanical impacts from harvested iceā¤ and the dispenser drive.
In thisā£ article readers will find a technical overview of the 241734001 āiceā¤ bucket ā¢covering it’s intended āfunction and typicalā¤ applications, guidance on āhow to determine compatibility with specific Frigidaire models, common failure symptoms (cracks, broken tabs, jammed auger, false ā¤level signals, ice bridging)andā¢ diagnosticā¢ checkpoints a technician, ā£engineer, ā£or appliance owner can āuse whenā¤ troubleshootingā¢ iceā production or dispensing problems.The article will also outline practical replacement considerations-such as verifying model fit, checking alignment and sensor engagementandā£ inspecting associated drive components-so that replacement decisionsā£ are informed ā¤by āmechanical interface andā¤ system interaction rather ā¤than cosmetic ā¢condition alone.
Table ā¢of Contents
- Functionalā¤ role and mechanical Design of the Refrigerator Ice Bucket
- How theā¢ 241734001ā Frigidaire Refrigerator Ice Bucket Integrates with the āIce Maker, Dispenser,ā and āInternalā¢ Cooling Systems
- Common Failure Modes and ā¢Diagnostic Symptoms of ātheā Ice Bucket Assembly
- Compatibility, Replacement Considerationsand Installation Procedure āfor āRefrigerator Ice Bucketā¤ Replacements
- Q&A
- Wrapping Up
Functional Role and Mechanical Design of the ā£Refrigeratorā Ice Bucket
The 241734001 Frigidaireā£ Refrigerator Ice ā¤Bucket functions as the ice storage and dispensing interface between the āautomatic ice maker and theā¤ dispenser mechanism. It collects and contains produced cubes,ā£ presents them to the auger or scoopand provides defined ā¢locations ā£for level sensors and actuator engagement. Proper operation depends āon dimensional accuracy ofā theā bucket’s ālocator tabs, āthe shape of the auger coupling pocket,ā and sensor cutouts; deviations from OEM geometry cause ice bridging, false lowāice signalsor auger disengagement in specific Frigidaire cabinet assemblies.
From a mechanical-design perspective the bucket is an injectionāmolded, foodāgrade polymer component withā£ reinforcement ribs, a drain route for meltā¢ waterand molded mounting features thatā control position and rotation. Service āfailure modes typicallyā involve ā¢brokenā¢ orā£ worn mounting tabs, deformed auger notchesor materialā£ fatigueā¢ from repeatedā freezeāthaw cycles; theseā£ defects alter ā£clearances ā¤and can permit slippage ā£or ā¤jamming. Inspecting mating faces for wear, clearingā¤ compacted ice finesā that promote ā¢bridging,ā£ and replacing the bucket āwhen mountingā geometry is compromisedā¢ areā¤ practicalā¢ maintainance steps ā£that restore reliable dispenserā operation.
- Auger coupling pocket: ā£keyedā recess to transfer torqueā without axial āplay.
- Locator ā£tabs andā¤ latch points:ā ensure repeatable seating and sensor alignment.
- Reinforcement ribs:ā control stiffness ā¢and resistā deformation under load.
- Drain/melt channel: prevents pool formation that leads toā refreezingā¢ and ā¢clumping.
- Material: rigid foodāgrade polymer selected for temperature cycling andā wearā£ resistance.
| item | Description |
|---|---|
| Part number | 241734001 āFrigidaire āRefrigerator Ice ā¤Bucket |
| Material | Foodāgrade ABS/Polypropylene (typical) |
| Mounting interface | Side locator tabs ā¤and ā¤keyed auger pocket for positiveā engagement |
| Typical service issues | Broken tabs, ā¢deformedā£ auger notch, ice ā¤bridging due ā£toā fines |
How theā¤ 241734001 āFrigidaire Refrigerator Ice Bucketā Integrates with the Ice Maker, dispenser,ā¢ and Internal Cooling Systems
The 241734001 Frigidaire Refrigerator Ice Bucketā functions as the primary ā¤ice collection andā transfer interface between the ice maker module and the dispenser or serviceableā¤ storage area. It is indeed a largely passive component that provides a mounting datumā and containment volume for diced or crescent ice produced by the ā¤ice maker;ā¤ in dispenser-equipped models the bucket also alignsā£ with the auger or ā¢chute and may incorporate a ā£drive socket, idler features,ā£ and sealing surfaces to ensure reliable engagement and controlled delivery. Correct mechanical āalignment and fitment are essential: improper seating can allow ice to bridge, prevent āthe āaugerā from engaging, āor permit warm air intrusion ā¤that accelerates melt and clumping. Technicians replacing or ā£upgrading āthe bucket should verifyā£ model compatibilityā with the ācabinetā£ layout andā¤ dispenser drive type rather ā¢thanā assuming āuniversalā¤ interchangeability.
The ā¤ice bucket ā¢interfaces indirectly with theā refrigerator’s internal cooling andā¤ airflow systems; its ā£location relative to the evaporator and the freezer circulationā¢ path determines how quickly ice equilibrates to the freezer ā¢setpoint and how susceptibleā it is to frostā build-up ā¢during defrost cycles. The bucket’s geometry and polymer ā£material reduce thermalā¤ conduction and help ā¤maintainā ice temperature, but obstructionsā to ā¤the evaporator fan or misalignment that exposes the ice to warmer āreturn air āwill increase melt ārate and āpromote blocky ice.Common practical āchecks include ensuring the bucket drive coupling and the dispenser auger areā£ free of brokenā fins or ice buildup,confirming clearance ā¢around theā bucket for properā¢ airflow,and verifying the defrost ā£andā£ fan operation āif recurring clumping is observed.
- Checkā mechanical engagement: drive ā¤socket, tabs,ā and alignment with dispenser auger.
- Inspect ā¤for ice ābridges or hardened clumps that indicate airflow or ā£defrost issues.
- Confirmā clearanceā from evaporator fanā and that āfan cycles during cooling.
| Item | Description |
|---|---|
| Mounting interface | Tabs andā£ recessesā that locate the bucket under the ice maker and againstā£ the dispenser chute. |
| Drive coupling | Socket āorā¢ keyed feature ā¤(present on dispenser-compatible buckets) thatā¢ transmits ā¤torque ā£from āthe auger motor. |
| Material & thermal behaviour | Low-conductivity plastic with internal āribs āto reduce ice adhesion āand ā¢moderate thermal mass to slow āmelt. |
Common Failure Modes and Diagnostic symptoms ofā the Ice Bucketā¤ Assembly
241734001 Frigidaire Refrigeratorā Ice āBucket is the āmolded receptacleā¤ that receives ice from ā¤theā¢ icemaker and positions it for ā¢the auger or ādispenser drive to pick up.ā In normalā¤ operation the bucket must seatā accurately against guide rails and ā¤the auger hub so the ā¤impeller teeth engage the ice reliably;ā tolerances on ā¤the mating tabs and āthe bucket’s central ābore are criticalā£ for compatibility with specificā£ Frigidaire models. Typical mechanical behaviors to watchā for are ice bridging ā(compactionā¢ ofā crystals āthat prevents flow), radial play between the āauger āand bucketā¢ hubā (which causes scraping orā stripped teeth)and cracking or deformation ofā the bucket ā¤lips that prevents proper ā£engagement-each ofā¢ which producesā distinct symptoms at the ādispenser even though the icemaker may be producing ice normally.
- No iceā£ dispensed: āauger spins but noā ice ādelivered – āfrequently enough caused by wornā or broken impeller teeth, ā¢bucket ā£misalignment,ā or excessiveā¤ compaction of āice in ā£the bin.
- Grinding āor clicking during dispense: indicatesā auger tooth slippage,ā£ foreign debris between auger and bucketor aā¢ looseā¢ bucket-to-shaft connection.
- Intermittent dispense or sensorā£ errors: mis-seated bucket orā faultyā level/door switches causing the control boardā to ā¤inhibit the motor.
- Water poolingā£ or icing in the bucket area: can point to a cracked bucket, improper drain pathor ā¢overfill from theā¤ icemaker.
Diagnosing failures ā£requires a mix of visual, mechanicalā and ā¤electrical checks: inspect āthe bucket forā£ cracks, deformationsā£ and worn impeller engagement surfaces; ā¤manually rotate theā auger with the ābucket inā£ place āto verify smooth engagement and checkā for side-to-side play;ā£ measure current draw onā£ the dispenserā¢ motor-high ā¢currentā¤ with no rotation implies a mechanical jamā while ā¤high current with ā¢noisy operation āimpliesā£ stripped teeth or debris.ā¢ Verify sensor continuity and actuator switches that detect bucket presence and level; āfor example, if the motor ā£runs but āthe ācontrol locks out after aā¤ few seconds, measureā the ā¢motor voltage and check the ā£dispenser control ā¢for overload ā£trips.When replacingā¢ the ā¢bin, ā¢confirm model compatibility and āthat mounting tabs, central bore diameterand sensorā cutoutsā match āthe existing assembly to ā£avoid repeat failures.
| Item | Description |
|---|---|
| no dispense / grinding | Likely āworn or brokenā¤ impellerā teeth, misalignment, ā¤or foreign āobject ābetween auger and bucket; inspect engagement surfaces and auger clearance. |
Compatibility, Replacement considerationsand Installation āProcedureā¤ for Refrigerator Ice ā£Bucket Replacements
The 241734001 āFrigidaire refrigerator Iceā£ Bucket functions as āthe primary ice collection and feedā£ component between ā¢the āicemaker and the ādispenser; it ācollects dispensed ācubes, āaligns themā with theā£ auger or āchute, āand provides ātheā mechanical interface ā¢(mounting tabs āand an auger engagement boss) ā¤required for controlledā£ delivery.Different Frigidaire designs useā¤ eitherā a bucket that passively ā¤feeds āan self-reliant auger motor or āaā£ bucket with anā integrated engagement boss āthat āmatesā¤ directly to the ā¤auger shaft; ā¤replacement buckets āmust match āthe tabā¢ spacing, engagement geometryandā any sensorā¢ or switch ālocations to preserve correct alignment and reliable ice deliveryā underā loadā and thermal cycling conditions. Practical compatibility checks include āconfirming ā£tab pitch, depth of ā¤the ā¢auger āreceptacleand clearance dimensions insideā£ the freezerā compartment rather than ārelying solely on model ā£yearā or appearance.
For replacement and installation, start byā disconnecting power to the refrigerator, removingā£ stored iceand checking the auger coupling ā£and anyā¢ bucket-mounted ā¤switches for wear or deformation; damaged ābosses orā stripped mounting ā£earsā£ are common failureā points that can cause intermittent dispensing or jams. ā£Typical installation steps include aligning ā¢the bucket tabs withā the freezer shelf rails, seating āthe auger receptacle over the drive shaft until it fully engagesand confirming free ā£rotation ofā the auger before ārestoring power; if the dispenser still jams,ā¢ verify the bucket āorientation and re-check clearances for frost buildup. Common compatibility/installation considerationsā¤ are summarized ābelow.
- Verify part numberā or ā¢measure tab spacing and augerā¢ boss dimensions ā¢before ā¢purchase
- inspect auger ācoupling, switch mountsand drainage slots forā damage or ice buildup
- Remove residualā£ iceā£ andā test ā¤free rotation of ātheā¤ auger after ā¢seating the bucket
- Use ā¤correct āfasteners ā¢and avoidā£ forcingā theā¤ bucket into position to prevent brokenā¤ tabs
- Perform a dispense cycle and listen forā£ scraping or grinding thatā£ indicates misalignment
| Item | Description |
|---|---|
| Part number | 241734001 – verify against refrigerator modelā or physicalā£ dimensions |
| Material | Rigid food-gradeā¢ thermoplastic (typical: polypropylene/ABS blends) |
| Mount type | Rail-mounted ātabs with āan auger āreceptacle; some models includeā sensor mounts |
| Typicalā failure modes | Brokenā mounting tabs, strippedā auger boss,ā¤ ice jam due ā¢to frost accumulation |
Q&A
What is āpart ā¤241734001ā and what ā£does it ā¢do?
Part 241734001 isā£ the ice bucket/iceā binā¢ assembly used in certain Frigidaire refrigerators. It āstores āand ā¤dispenses cubedā£ or crushed ice produced by āthe refrigerator’s ice maker and (on ā¢models that haveā¢ one) works with an augerā£ or drive coupling to deliver ice to theā¤ dispenser.
how can I confirm 241734001 is the correct replacement for my refrigerator?
Confirm compatibility by checkingā the part number printed on your existing ice ābucket or by looking up āyour refrigerator’s full model ānumber on the back wall or on the owner’s tag. cross-reference that model number with āthe Frigidaire parts list or a reputable parts supplier.Never rely purely on visual ā¢similarity-verifyā OEM part numbers or the ārefrigeratorā modelā¤ to āensure a correct āfit.
How ā¢do I remove and replace the 241734001ā¢ ice bucket?
General steps: ā¢unplug āthe refrigerator or switch ā¢off powerā¤ atā¢ the breaker; open āthe freezer or iceā£ compartment and remove ā£any ā£shelves or drawers blocking access; āif ā¤present, liftā¢ the ābucket slightly and slide it out ā£along its track; disconnect any retaining clips āor the auger ā¢drive ā¢coupling (note the orientation of splines), then installā¤ the new bucket ā£by reversing the steps. Avoid forcing the ā¤bucket; if an auger motorā isā involved, ensure the drive coupling engages correctly before restoringā£ power.
Do Iā¢ need ā¢tools or to disconnect the ā¢iceā maker to replace the bucket?
Often āno special tools are required for a simple drop-in ā¤ice bin-most remove by hand. However,ā some models have screws, trim piecesor a ā¢drive coupling that may require a āscrewdriverā¤ or small wrench. It’s āgood āpractice to disconnect powerā to the iceā¤ maker or unplug the refrigerator when working on the auger or drive components to prevent accidental motor operation.
What are ācommon problems thatā indicateā the ice ā¤bucket āis āfaulty and needs āreplacement?
Signs include visible cracksā or ā¢warping that cause leaks, a damaged lid thatā lets frostā£ form āor causes ice clumping, a broken auger drive coupling or splines that preventā¤ dispensingandā¤ persistentā¤ jams or ice that doesn’t move to the dispenser. If the bucket no longer seatsā properly or makesā¤ excessive noise duringā¢ dispensing,replacement ā¢is likely needed.
How should I clean and maintain the 241734001ā ice bucket?
Remove the bucket and empty old ice. āWash ā¤with āwarm waterā¢ andā mild dish soap; rinse thoroughly and air dry ābefore reinstalling. Doā£ not useā¤ harsh chemicals, abrasive ā¢padsor veryā£ hotā water (which canā£ warp plastic). Regularly checkā¤ and defrost any ice build-up in ā£the bin ā¢and āmakeā£ sureā the freezerā¤ doorā seals are in goodā condition to ā¢reduce humidity ā£andā clumping.
Will replacing theā£ ice bucket fix ice dispensing issues?
Replacing a damaged or severelyā¢ warped bucket can resolve many ā¢dispensing problems, but notā all. If the issue is an auger motor, dispenser motor,ā¤ actuator, ice maker output, āor ācontrol board,ā changing onlyā£ the bucket won’tā help. Diagnose by checking whether the auger turns, whether the dispenser motor ā£runsand whether the ice maker isā producing properly before assuming āthe bucket is the ā£sole cause.
Where can I buy a ā£genuine 241734001 ice bucketā and what about warranty?
Genuine 241734001 āparts are available āfrom Frigidaire-authorized parts dealers, someā¢ appliance parts retailersand recognized online marketplaces. Always verify the seller is supplying anā OEMā£ partā£ if youā want factoryā fit and finish. Warranty terms vary by seller and whether the part is sold through Frigidaire; check the vendor’s warrantyā policy-many parts sellersā£ offer limited warranties (often 30-365 days) but manufacturer coverage depends on purchase source and original applianceā£ warranty.
Wrapping Up
The 241734001 frigidaireā refrigerator ice bucketā¢ servesā aā¤ straightforward butā essential role in everyday appliance function: it collects, stores and dispenses ice ā¤produced by the freezer’s ice-making system while helping to maintain āsanitary storage and āproper alignment with the ice dispenserā mechanism. As an OEMā¢ componentā¢ identifiedā by ā¤its part number,the ice bucket contributesā to consistent ice delivery,correct fitment āin compatible Frigidaire models,andā reliable interaction with āassociated partsā such as the ice ā£maker assembly,auger and dispenser controls.
Accurate diagnosis is important whenā ice-related problems arise, because visible bucketā¤ damage isā¢ only one of several possibleā£ causesā£ for issues suchā as poor ice flow, abnormal noises āor contamination. Verifyingā¢ that the bucket ā¢is cracked,warped,damagedā or incompatible ā¤before replacement helps avoid āunneeded costs and ensures that underlying problems-such as a failing auger motor,clogged chute,or ice maker malfunction-areā£ addressed ā¤appropriately. When inspection confirmsā the bucket is the ā£source of the problem,ā¤ replacingā£ itā¢ with theā correct 241734001 part maintainsā fit, function and safety.
recognizing the ice bucket’s role and āapplying a measured approach to troubleshootingā and replacement supports reliable refrigerator performance ā¤and user convenience.ā¤ Proper identification, timely replacement when warrantedand confirmation of system operation after installation āall help preserve applianceā¢ efficiency and ā¤extend service life ā¢in a practical, cost-effective manner.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
