240457701 Frigidaire Refrigerator Freezerā Door Closing Cam Stop āis a molded cam-stop componentā£ used in Frigidaire refrigerator/freezer doorā hinge assemblies to controlā¢ the final closing movement āadn provide a ā¤defined stop and engagement surface.ā£ It is typically ā¢a small molded thermoplasticā or reinforced polymer āpart thatā¤ mountsā to the hinge or strike area and interfaces withā the door or cabinet strike; its form and profile determine the stopping ā£position and contact surface for the ā¤door asā it reaches āclosed position.
Within the āappliance, theā cam stopā governs door kinematics āat the end of travel, absorbing closing energy, establishing gasket ā£compressionand maintaining repeatable alignment between the ā¤door āseal and cabinet frame.It interacts mechanically with the ā¤hinge ā¤pin or strike,the door leaf,the gasket sealing surface and,indirectly,with āsystems that depend on door state ā¢such asā¤ the interior light,evaporatorā¢ fan control,and temperature management; incorrect operation or wear of the cam stop can produce sealā£ gaps,increased air infiltration and consequential impacts on refrigeration load and defrost behavior.
This article explains the component’s intended function and design role,outlines model ā£compatibility and how to verify the ācorrect ā¢240457701 part for a given refrigerator,and describes common failure āsymptomsā such āas doorā sag,incomplete sealing,unusual noise on closing and visible abrasion orā¢ cracking. Itā alsoā¢ covers diagnostic approaches a technician or appliance ownerā can ā£use to evaluate cam-stop ācondition (visual inspection, hinge play assessmentā£ and door-seat verification), plus replacement considerations including matching ā£OEM orientation and material, ā£addressing associated ā¢hingeā£ or gasket wear,ā and practical installation checks to restore correct door sealing and alignment.
Table of Contents
- Cam Stopā Functional Role: Door Alignment, ā¢Latch Engagementand Sealā Integrity
- How the 240457701 ā¢Frigidaire Refrigeratorā Freezer Door Closing Camā£ Stop Integrates with Hinge Geometry andā Door Seal Compression
- Commonā Failure Symptoms and Diagnostic Indicatorsā¢ ofā a worn or Misaligned Cam Stop
- Replacement Considerations, Model Compatibilityand āInstallation Procedure for the Cam Stop
- Q&A
- To Conclude
Cam Stop Functional Role:ā¢ Doorā Alignment, Latch engagementand Sealā Integrity
The 240457701 Frigidaire Refrigeratorā Freezer Door Closing Cam Stop is a āsmall but critical mechanical component that defines the ā¢door’s end-of-travel ā¢position āand provides theā¢ interface for theā¢ latch/strike to engage. It is typically a ā¢molded polymer or plated ā¤metal cam that mounts āto the hinge or cabinet frame and captures the last degrees of door movement toā align the door face with the cabinet, control the compression ofā the gasket, āand presentā¤ a repeatable surface for the ālatchā¢ to ā£engage. Proper geometry and wear resistance are required so the cam stopā¢ maintainsā consistentā latch engagementā and seal integrityā across many open/close cycles; any changeā£ in ācam profile or mounting position alters door alignment and can produce airā leaks or persistent gaps along the gasket perimeter.
Techniciansā¢ evaluate the camā stop by inspecting for abrasion, flattenedā¢ surfaces, cracksor loose mounting that allow movement under load; symptoms of a failing cam āstop include inconsistent latching, visible gaps atā theā¢ door gasket, increased frost in the ā£freezer, āor a ā¤door that ādrifts open slightly. ā¢Replacementā¤ involves matching theā¤ exact part number to theā¤ refrigerator āmodel and confirming the cam orientation and fastener location before final torqueing. Practical āservice steps often include removing the hingeā£ cover, swapping the cam āstop, reassembling the ā¢hinge, āand then adjustingā hinge screws to re-establish proper ā¢gasket compression and door-to-frame parallelism.ā¤ Examples: replacing aā worn cam stop typicallyā£ restores āa uniform āgasket contact line āand resolves warm spots near the door ā£edge without further sealing modifications.
- Symptoms: door not staying latched, visible gasket gaps, increasedā run-time or frost near the door edge.
- Inspection points: camā profile wear, mounting boss ā¢integrity, fastener torqueand ā¤mating āstrike condition.
- Service note: confirm exact part number and orientation; do ānotā trim āthe gasket ā¢to compensate for alignment faults.
| Item | Description |
|---|---|
| Part | 240457701 Frigidaire Refrigerator freezer Door Closingā£ Cam Stop |
| Function | defines door end-of-travel, ensures latchā¤ engagement and correct gasket compression |
| material | Moldedā£ polymer or plated metal (model-dependent); select replacement per OEM spec |
| Common symptoms | Inconsistent latching, door gaps, frost buildup, increased compressor runtime |
| Compatibility tip | Match part number and hinge/strikeā configuration to model; check mounting boss and fastenerā¢ type |
How the 240457701ā£ Frigidaire Refrigerator Freezer Door Closing Cam Stop ā£Integrates with Hinge ā¤Geometry and Door Seal Compression
Theā£ 240457701 Frigidaireā Refrigerator Freezer Doorā Closing Cam Stop functions as the mechanical endpoint thatā converts hinge ā¢rotation āinto āthe controlled linear displacement required to compress the ā¢door gasket. mounted at the hinge ā¤pivot, the cam surface and stop ā£profile āareā sized andā positioned to engage ā¢a mating boss on ā¢the hinge as the door approachesā closed, creatingā aā smallā inward forceā£ that ā£establishes the seal preload. ā£Because the cam stop āsets ā£the final travel and contact āangle, its āgeometry directly ā¤controls how evenly the gasket compressesā around the cabinet face;ā a worn or incorrectly profiled cam āwillā allow overtravel orā premature seating,ā¤ producing uneven compression, air leaksor acceleratedā£ gasket wear. For example,replacing a ā¢damaged cam stop ā¤with one that has āa different thickness or nose ā¤profile can shift the āsealingā line by several millimeters,changing how the gasket contacts the frame and perhaps ā¤causing cooling loss or rubbing ā¤noise.
Technicians should consider both āpart compatibility ā£and hinge adjustability when diagnosing seal and alignment issues: āthe cam stop must match the hinge boss location and pivot clearance so the cam engages at the designed angle ā¢and travel. Practical checks ā£include observing theā£ cam engagement during a ā¢slow close, looking for lift or rotation at the hingeand confirming uniform gasket contactā£ around the perimeter; minor differences can often ā¤be corrected by hinge shim,ā pivot screw adjustmentor replacingā¤ the cam stopā£ with the OEM item. Typical material āchoices (durable polymer or plated steel) and āmanufacturing tolerances affect wear rate and friction, so ā¤useā parts specified for the model and, after replacement,ā£ verify seal compression and doorā¤ alignmentā¢ under loaded conditions (shelves āand ātypical ā¤contents) to ensure consistent sealing and hinge operation.
- Function: controls final travel and converts rotation to inward ā¤seal preload
- Behavior: wears can cause overtravel, undercompressionor uneven sealing
- Compatibility: must match āhinge boss position and pivot clearance
- Troubleshooting: inspect engagement, checkā gasket contact, verify after replacement
| Item | Description |
|---|---|
| Part | 240457701 Frigidaire Refrigeratorā Freezer Door Closing āCam Stop |
| Primary function | Set finalā hinge travel and generateā¤ controlled gasketā preload |
| Common failureā¤ symptoms | Uneven sealā¤ compression, door rub, air leaksor excessive door play |
| Service note | Install OEM-equivalent profile and verify seal compression with the door loaded |
commonā Failureā Symptoms and Diagnostic Indicators of a worn āorā¢ Misaligned Cam ā£Stop
The 240457701 Frigidaire Refrigerator Freezer Door Closing ā¢Cam Stop functions as the mechanical stop that defines the freezer door’s final positionā¢ and the amount of gasket compression against ā£the cabinet. It is typically molded to engage the hinge or strike plateā at the end ofā travel, absorbing closing energy and maintaining lateralā¤ alignment of āthe door. When this camā stopā¤ becomes worn, chippedor displaced,ā¢ the door can sit out ofā¤ alignment, theā¤ gasket may fail to compressā evenlyand the seal integrity is compromised – symptoms that are directly traceable to the stop’sā geometry and fit within the hinge assembly.This part āis designed to work with specific Frigidaire ā¤hinge and strike arrangements, so physical compatibility and correctā¤ orientation areā¤ essential for restoring correct door behavior.
Common failure symptoms includeā£ uneven seal compression, intermittentā closure, door āsagging orā£ binding, audible clunks at the end ofā¢ traveland localized frosting or ā£water ingressā near the seal. Diagnostic indicators useful for technicians include visible rounding ā¤or missing material āon the ācam ā¢face,ā lateral playā betweenā the camā¢ and hinge boss, inconsistent engagement with the strike during slow closing, āand measurable asymmetryā in theā£ door-to-cabinet gap. Practical field ā£checks include aā visual inspection for cracks or abrasion, using a feelerā¢ gauge to compare gap uniformity at multiple points, observing engagement whileā£ slowly closing the door to confirm where āthe stop contacts ā£the strikeand temporarily shimming or replacing the ācam stop to verify restoration of proper ā£seal compression.
- Door fails to remain closed or requires extra force toā£ latch
- Uneven gasket compression or sealing gaps along one side
- Loud impactā or clunk at end of travel and visible āwear onā camā£ surface
- Localized frost/water accumulationā¢ adjacent to theā£ door ā¤seal
| Item | Description |
|---|---|
| Visual wear | Rounded, chippedorā cracked cam face that ā£no longer provides a positive engagementā¢ surface |
| gap/Seal check | Compare ācompression at top, middleand bottom āwith a feeler ā¢gauge; āinconsistent measurements indicate cam or hinge misalignment |
Replacement Considerations, Model Compatibilityandā¤ Installation āProcedure forā the Cam ā¤Stop
The refrigerator door camā¢ stop ācontrols āthe last degrees of ādoor travel andā¤ provides a repeatable pivot positionā£ so the freezerā door seals reliably. The replacement partā 240457701 Frigidaire āRefrigerator āFreezer Door closing Cam Stop is a small ā£molded component that ā¢interfaces with the hinge carriage āto arrest motion and protect the gasket from over-compression.ā Failure modes include plastic wear or fracture, increased play at the hingeand inconsistent seating of the door that leads to cold-air leakage; technicians should compare the geometry andā¢ mounting holeā¤ pattern ofā¤ the suspectā¤ part āto the OEM piece before ordering to ensure compatibility with the hinge orientation (left/right) ā¤and chassis variant of the specific Frigidaire model.
Typical replacement requires basic hand tools and carefulā door support to preserve alignment; the following concise procedure describes ā¤the safe sequence ā£of actions and verification after ā¤fitting. Start ā¢by supporting the door weight to prevent hinge orā£ gasket damage, remove the hinge fastenersā£ holding the cam stop,ā transfer theā new cam into the sameā orientation,ā andā¢ reassemble while checking for even gapā£ and fullā£ seal throughout the swing. After installation, operateā¤ the door through āitsā£ full range and check that theā£ cam stop engages cleanly without binding; if the door binds or gaps open, backā¢ offā£ the hinge ā¢screws, realign ā£theā stopand retest. Recommended fast steps for fieldā service:
- support the door ā(block or helper), open ā¢to access top/bottom ā£hinge.
- Remove āhinge āscrews,ā£ note any shims or spacers and their orientation.
- Replace the cam stop, reassemble ā£hinge hardware in original order āand torque snugly.
- Cycle the ādoor, inspect seal compression and adjust ā¢hinge alignment if necessary.
| Item | Description |
|---|---|
| Part number | 240457701 – ā£OEM replacement cam āstop for compatibleā¢ Frigidaire ā¤hinge assemblies |
| Function | Limitsā door travel ā¢and provides repeatable āsealing position |
| Typical tools | Phillips screwdriver or torx driver, socket set, door support/block |
| Compatibility check | Match mounting hole āspacing, hinge orientationand cam profile to existing part |
Q&A
What isā the 240457701 Frigidaire refrigerator freezer door closing ācam stop and what does it do?
The cam stop is a small ā¤plastic/nylon component in theā¢ door āhinge assembly that ācontrolsā the door’s travel and final positioning. It engages ā£with ā£the hinge camā¤ to stop the door at the correct open/closed angle and helps keep the door aligned so the gasket seals properly.
What symptomsā¢ indicate the ā£cam stopā is worn ā¢or ā¤broken?
Common symptoms include a āfreezer or refrigerator ādoor that sags,hangs open,slams shut,won’t stay in the intended āopen/closed ā£position,rubs against the cabinet,or āfails to form a tight seal. You may alsoā here clicking or loose movementā atā theā£ hinge.
How can I inspect or test the cam stop toā£ confirm it’s the problem?
Unplug or power down the āfridge for safety and support āthe door. Visually inspect the cam ā£stop for cracks, broken ā£lobes,ā¤ or excessive wear. check forā£ play by āmoving the doorā£ whileā¤ watching ā¢the hinge-excessive lateral āor rotational movement around the cam indicates wear.Compare the partā£ against the partsā diagram or a known-good cam if available.
Can I replace only the cam stopor do I need to replace the entire hinge assembly?
Often the cam stop is available ā¢as a separateā replacement andā can beā¢ swapped āwithout replacing the entireā hinge. However, if the hinge shaft, hinge bracket, ā£or other mating components are heavily worn or damaged, you should replaceā¢ the ā¢whole hinge assembly to restore proper function and longevity.
What ā¢tools and basic steps are required to replace āthe cam stop?
Typical tools: screwdriverā¤ orā torx driver, nut driver orā£ socket ā£set āmatching the hinge fastenersand something to support the door ā(a blockā of wood or an assistant). Basic āsteps: 1) Emptyā door pockets asā needed and support the door, 2) ā¢remove the hinge cover āif present, 3) loosen or remove the hinge screws/bolts whileā supporting the door, 4)ā remove the hinge to access the cam stop and swap the oldā camā¤ for the new one, 5) reassemble, torque fasteners āsnuglyandā check door alignment and sealing.Follow theā model-specific service sheet for exact fasteners and torque recommendations.
Do I need to remove the whole door to change the cam stop?
Not always. On some Frigidaireā¤ models you can access āand replace the cam stopā with the door āpartly supported and the hingeā partially unbolted.ā£ On other āmodels you āmay need to remove the door to safely access the hinge. if unsure, supportā the door securely and consult the model’s service manual or parts diagram.
How do Iā make sure I buy the correct replacement part for my refrigerator?
Verify the part by āmatching the part ā¤number (240457701) and yourā refrigerator model number (found onā¤ the interior wallā or behind a grille). Use the manufacturer’s parts lookup or a āreputableā£ parts supplier. ā¢avoid guessing by model family alone-many Frigidaire models use different hinge components.
Howā£ much doesā replacement typically cost and should I hire a technician?
Theā cam stop itself āis typically aā¤ low-cost part (commonly under $30). Laborā is usually ā0.5-1.5 āhours depending on access and whether the doorā¤ must be removed. If you are comfortable supporting and aligning ādoors andā have ābasic tools, it’s a moderate DIYā£ job. Hire a technician if you’re not confidentā¤ supportingā£ the door, if the hinge area shows broader damageor if correct alignment after replacement is critical.
To Conclude
The 240457701 Frigidaire refrigeratorā freezerā£ door closing ā¤cam stop is ā¢a smallā¤ but āvital componentā£ that ā£helps ācontrol the final motion and seating of the freezer door. By guiding the hinge mechanism āthrough its closingā arc and ā¢limiting overtravel, the cam stopā promotesā¤ consistent door alignment, maintains a reliable seal,ā£ reduces stress on ā¤hinges and gasketsand helps preserve ā¤internalā temperature stability andā energy efficiency.
As symptoms such āasā¤ a doorā¢ that fails to latch, uneven gaps, rattling during closing, āor accelerated gasket wear can stem from a worn or damaged cam stop, proper diagnosis is crucial before proceeding with repairs. Confirming the ācam stopā¤ as the root cause-either through inspection or byā¤ aā qualified technician-ensures the correctā part (240457701)ā£ is selected and installed. Using the āappropriate replacement part and following manufacturer installation guidanceā restores intended function, minimizes risk āof further ādamage,ā£ and supports safe operation.
addressingā issues related to theā¢ 240457701 camā stop promptly and ā£correctly contributes ā£to reliable door performance,appliance longevity,and consistent cooling. Routine inspection and timely replacement of worn closure components, performed or verified by ā£someone familiar with refrigerator door mechanics, is a practical step toward maintaining appliance efficiency and protecting stored food.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
