316558300 â¤frigidaire Oven 9.5L Sealed âBurner is a factory-designated burner assembly used on compatible Frigidaireâ ranges and cooktops; it is a sealed gas burner component âthat âŁcombines the⣠burner⤠head, cap,⣠and⣠mating⣠orifice/venturi interfaces in a âconfiguration intended to limit spill ingress and provide a defined⤠combustion port⢠geometry. The “316558300” identifierâ and the “9.5L” qualifier denote the specific â˘cataloged âpart âŁand its size/configuration â¤within â¤Frigidaire’s partsâ system,distinguishing⢠it from othre burner sizes andâ assemblies.
Functionally, the â˘sealed â˘burnerâ serves as âŁthe primary combustion element for a cooktop cooking zone, producing the controlled flame used for heating cookware. It interfaces directly⢠withâ the appliance’s âŁgas manifold and inlet orifice, the ignition system â¤(spark⣠electrode orâ hot surfaceâ igniter), â¤and the user control (valve or⢠infinite switch) âor âelectronic âcontrol module. Because it is âŁa sealed â¤design, the assembly⤠also interactsâ with the burner box and top surface âto âlimit liquid⣠and debris entry into the âinternalâ cavity,â which affects both flame stability and âthe â¤reliability of flame sensing and ignition â¤components.
In this articleâ readers will find⤠a technical⣠examination⤠of âtheâ 316558300 âsealedâ burner âcovering its function and typical installation contexts, how to determine compatibility with specific Frigidaire models and gas types,⢠common âŁfailureâ symptoms (for âŁexample uneven or âyellow flame, delayed ignition,⣠continuous clickingor gas odor), âstepwise⢠troubleshooting âŁchecks (visual inspection,⣠port cleaning, igniter and electrodeâ testingorifice verificationand pressure/leakâ checks),â andâ practicalâ replacement considerationsâ such âas â¤matching âŁpart numbers and orifice sizes,â sealing and â˘mounting practicesand safety steps to follow whenâ removing âand installing the â¤assembly. The goal is to provide âŁactionable technical information useful to technicians, â˘engineersandâ applianceâ owners⢠without â¤prescribingâ manufacturer-specific service⤠procedures beyond generalâ best practices.
Table of Contents
- Function and Role â˘of theâ Sealed Burnerâ Assembly in Oven Heating,â Gas Flowand â¤Safety Regulation
- How theâ 316558300 Frigidaire â¤Oven 9.5L Sealed burner Integrates with Ignition, Gas Supplyand Thermal Sensor âŁsystems
- Common Failure âSymptoms and⢠Diagnostic Indicators⢠for âIgnition, Heat Outputand Gas Leakage
- replacement Considerations, Modelâ Compatibility, â˘and StepâbyâStep âŁInstallation Procedures
- Q&A
- Toâ Wrap⣠It⢠Up
Function âand âŁRole⢠of the âSealedâ Burner Assembly in Ovenâ Heating, â¤Gas Flow,⢠and Safety Regulation
The 316558300 frigidaire Oven 9.5L Sealed Burner is a â¤sealed burnerâ assembly designed to regulateâ gas flow and deliver consistent heat to the⣠oven cavity and cooktop surface while minimizing⣠intrusion âof spills âandâ debris intoâ theâ burner box. The⤠assembly controlsâ gas â¤via a⤠calibrated âorifice and âŁprimary-air mixing⤠upstream âof the â¤burner ports; correct orifice sizing and âmanifold pressure âdetermine the volumetric flow rateâ and âflame shape. The⢠sealed configuration isolates the combustionâ zone from the appliance underside, which reduces⤠corrosion and⣠stabilizes heat transfer⢠characteristics; whenâ replacing or servicingâ this⤠part, technicians should âverify orifice type, mounting alignmentand electrodeâ gap â˘to maintain⢠properâ ignition and combustionâ performance.
Safety regulation⣠ofâ the sealed burner â¤relies on coordinated hardware: a shutoff/safetyâ valve⢠and flame-sensing circuit prevent unburnedâ gas â¤flow, the sealed pan reduces âthe risk of flare-ups âfrom spilled⢠liquids, âŁand a⣠correctly adjusted air-gas mixture prevents sooting or yellow flames that indicate incomplete combustion. Typical troubleshooting steps include inspecting burner âports for blockages, âmeasuring manifold⤠pressure with â˘a manometer, confirming spark electrode positionand performing a pressure-and-leak check⣠after reassembly. Practical âindicatorsâ of improper behavior are uneven âŁflame rings, persistent âyellow tipping,⣠delayed ignitionor⣠strong⢠odor of gas;⣠these symptoms⤠point to clogged ports,â mismatched orifice/regulator configurationor failed⤠safetyâ components and should⤠be addressed before returning the oven to service.
- Key inspection âpoints: flame color and pattern,electrode âgap,orificeâ identification,manifold pressure,and leak-tight fittings.
| Item | Description |
|---|---|
| Orifice | Controls âgas flowâ rate; must⢠match gasâ type â(NG vs âLP)â and appliance âŁpressure. |
| Sealed pan | Prevents âŁfood/debris⣠from entering⤠burner cavity and âŁaffects heat distribution. |
How the 316558300 âFrigidaire Oven 9.5L âSealed Burner integrates with Ignition, Gas Supplyand Thermal sensor Systems
The 316558300 Frigidaire Oven 9.5L Sealed Burner serves as the âmechanical âand fluid interface between⤠the oven’s âgas manifold, the ignitionâ systemand flame/thermal sensing devices. Physically, the sealed burner mounts âŁto the oven floor and aligns with the â˘manifold orifice; its âport â¤geometry âand orificeâ size âŁdirectly determine nominal gas flow and flame shape. Ignition⤠is⤠normally provided by a⣠separate spark electrode or âhot⢠surface igniter âŁthat must be positioned and gapped⢠correctly ârelative to the âburner ports to obtain âŁreliable⢠ignition; âthe control module supplies high-voltage pulses âor timed hot-surfaceâ power while the â˘manifold valve meters gas. Theâ sealed construction reduces airflow âperturbations andâ prevents food and debris from entering âŁthe combustion âarea, which improves long-term ârepeatability â¤of ignition and sensor readings⢠but requires correct sealing and alignment âduring replacement or service.
- Ignition â¤compatibility: spark⣠electrode or hot-surface igniter; electrode gap⣠and positioning are critical for consistent spark transfer.
- Gasâ supply: manifold orifice sizeâ and inlet pressure determine heat⢠output; conversion between Natural Gas and LP ârequiresâ specific orifice changes and â˘pressure⢠regulator checks.
- Sensor interfaces: flame âŁsensor/thermocoupleâ placement â˘senses âpresence/quality âof flame; ovenâ temperature sensor provides control⢠feedback separateâ from burner flameâ sensing.
- Troubleshooting cues: âno â˘spark, delayed ignition, weak âŁflameor âŁflame dropout typically point â˘to electrode misalignment, clogged orifice,⣠incorrect pressureor sensor failure.
In practical âservice, technicians âverify three relationships: that the ignition system produces a reliable spark or heat at the âcorrect timing, that the gas manifold and âorifice deliver âstable pressure and flow, âand that the thermal/flame sensor responds within expected âvoltage âor resistance ranges. For â¤example, a burning odor with no sustained⤠flame usually indicates the control⣠is opening the valve but the flame sensor âis not detecting a flame and commandsâ shutoff;⢠conversely, a strong âŁsparkâ with aâ thin, lifting⣠flame suggests low âinlet pressureâ or a partially â¤blocked orifice. When replacing the burner, match orifice size andâ mounting orientation, confirm electrode gap⣠with a feeler gaugeand use a manometer toâ check manifold⢠pressureâ against â˘the â˘oven specification to ensure â˘safe, compatible operation.
| Item | Description |
|---|---|
| Ignition⣠interface | spark electrode or hot-surface igniter;⢠must âalign âwith burner ports and meet control timing |
| Gasâ requirement | Orifice-specific flow; requires conversion âand regulator âcheck for LP⢠vs Naturalâ Gas |
| Thermal â¤sensing | Flame sensor/thermocouple for flame detection;â separate âoven temperature âsensor⤠for control |
Common Failure â˘Symptoms and Diagnostic âIndicatorsâ for Ignition, Heat Outputand Gas Leakage
The 316558300 â¤Frigidaire Oven 9.5L âŁSealed Burner integrates a âŁspark ignition electrode, a safety gas âvalveand a set of â˘sealed burner ports that together âŁcontrol ignition âŁand heat âŁoutput while minimizing⣠spills into the âŁburner â˘box.â In normal operation the âŁignition module⢠generates a high-voltage â˘spark âatâ the electrode âto open the⣠safety âvalve, allowing gas to flow through a precisely âsized orifice and theâ sealed âports to â¤produce an even flame. Because the burner assembly is sealed,â performance problems frequently relate⤠to port blockage, electrode âmisalignmentor valve seating; compatibility of replacement âcomponents⣠(orifice size, â˘electrode lengthandâ manifold⢠fittings) must⤠match the oven’s⣠specifications toâ preserve proper⢠pressure-to-flowâ characteristics andâ combustion behavior.
- Continuous clicking with⣠no flame – ignition module or electrode⣠fault.
- Delayedâ ignition or flash – partial port blockage orâ slow valve response.
- Low âor uneven heat -⣠clogged ports, incorrect orificeor regulatorâ pressure issue.
- Yellow/sooty flameâ or strong odor ⢠– incomplete combustion or gas leakage.
Diagnostic âŁindicators combine visual flame âcharacteristics,audible cues,and simple electrical or pressure checks. â˘Verify a visible,⤠consistent blue flame pattern across â¤ports for correct combustion; a yellow tip or sooting indicates an air/gas âŁmixture⤠or blocked â˘port. Confirm spark presence andâ correct electrode⤠gap by observing the âelectrode during a start cycle; âif there is sparkâ but âno valve activation, measure continuity of the safety valve â¤coil and listen âforâ its mechanical click. âFor suspected leakageâ perform a soap-bubble â˘test at âfittings and the manifold while the gas isâ off but âpressurized,and isolate âŁwhether the leak isâ at⢠aâ flexible⣠line,valve seat,or the burner-to-manifold interface. âPractical âfixes â¤frequently enough start with a port-cleaning and electrode alignment, progress to ignition module or valve â¤replacement when â¤electrical âŁtests fail,⣠and use aâ calibrated manometer⢠or â˘service âgauge when regulator âor âŁsupply pressure is⤠in question.
| Item | Description |
|---|---|
| No ignition | Check electrode â˘spark, ignitionâ module outputand valve coil continuity; replace faulty ignition components. |
| Low/uneven flame | Inspect⤠and clear âsealed ports,confirm â¤correct orifice andâ supply pressure,check⤠regulator. |
| Gas odor/hiss | Perform soap test â¤atâ fittings⢠and manifold, shut off supplyâ and repair/replace leaking valve or âŁconnection. |
Replacement âŁConsiderations, âModel Compatibilityand StepâbyâStep Installation Procedures
The 316558300 Frigidaire Oven 9.5Lâ Sealed Burner functions â¤asâ the⢠primary combustion component in âŁcompatible Frigidaire ovens, delivering a⤠controlled gasâ flow to âthe cook chamberâ while âisolating âthe burner ports⢠fromâ spillover and debris.Internally the â¤assembly combines âthe âburner â˘tube, burner headand the ignition/thermocouple interface; correct â˘operationâ depends on matched â¤orifice size, âmanifold pressure, âŁand aâ secure â˘mechanical and electrical â˘connection âto the âoven’s valve and⣠ignitor.â Replacement is required when you observe persistent ignition failures, an irregular flame patternâ (large yellow⤠tips orâ lifting)or â¤visible⣠corrosion that changes the burner portâ geometry. Confirm compatibility⤠by checking â˘the mounting flange pattern,⢠gas type (Natural⤠vs LP)and â˘the⢠ignitor/thermocouple lead termination -⣠physical âfit alone is not âsufficientâ because orifice sizing and valve interface âmust match the oven’sâ service specifications.
Follow a controlled sequence during replacement to â˘avoid âleaks, ignition faultsor sensor misalignment. Beginâ by isolating both gas âand âelectrical supplies, then remove oven access panels and disconnect the ignitor/thermocouple leads before unbolting theâ burner assembly. After installing the âŁnewâ sealed burner,verify that the burner gasket seats evenly,reconnect sensors using⤠the âŁoriginal connectors or approved replacements,and⤠perform a low-pressure gasâ leak check and a functional⤠run to inspectâ flame shapeâ and steady ignition. If⢠flame adjustment is necessary,â adjust⤠the primary air⢠shutter orâ replace the⤠orifice with the correct size âŁfor the appliance’s manifold⣠pressure; final verificationâ should âinclude temperatureâ rise and cycle testing âunder ânormal loads.
- Safety â˘first: shut off gas and power before startingâ work.
- Confirm part cross-reference and â˘orificeâ size against the oven service manual.
- Replace gaskets and âmounting hardware;⣠hand-start fasteners,â then torque âto service specification.
- perform a leak check (soapy âwater or electronic detector) atâ fittings and manifolds beforeâ restoring normal use.
- Observe flame: steady blue cone âwith minimal yellowâ tips; adjust â˘air shutter or recheck orifice if necessary.
| Item | Description |
|---|---|
| Part | 316558300 sealed burner⤠assembly – includes burner head and â˘ignition/thermocouple interface;â replace as a âunit âfor reliable combustion. |
| Compatibility | Fits Frigidaire âŁovens âdesigned for the â˘9.5L sealed burner profile;⤠verify valve interface, mounting flangeand gas âtype against the⤠serviceâ parts list. |
| installation checks | Confirm gasket seating, lead connector âpolarity, âorifice sizing, manifold pressureand perform⢠leak and functional flame testsâ per service procedures. |
Q&A
What is part 316558300 (Frigidaire â¤9.5L sealed burner)?
Part number â316558300â refers to a sealed surface burner assembly used onâ certain⣠Frigidaire gasâ ranges. ââ9.5â commonly denotes the burner size â¤(about â¤9.5 âinches across the cap/crown) and âLâ indicates it’s used⢠in a left/front position on some models.â A sealed burner assembly includes the burner base,⤠cap/crown and the ignition/electrode areaâ designed so spills â˘are kept out of the cooktop⢠cavity.
How⣠do⣠I know if the sealed âburner is⢠failing or â¤needs replacement?
Common signs of a failing⣠sealed burner: â¤uneven or⢠unstable flame, persistent yellow tipping on the âflame, â˘burner âŁthat won’t light âor repeatedlyâ goes out, âvisible cracks or damage â¤to the⢠burner crown/cap or electrode,â or â¤ignition sparking but no sustained flame. If cleaning and â¤basic troubleshooting âdon’t restore ânormal operation, the burner assembly or â¤the associated⢠electrode/igniter may need replacing.
Can â˘I replaceâ part 316558300 myselfand what safety âsteps âŁshould âI follow?
You can replace⣠a sealed burner yourself if you are comfortable working on⢠appliances, but â˘follow safety steps: disconnect electrical power to â¤the range,⤠turn off the gas âsupply, allow all parts to⢠cooland â˘work in a wellâventilated area. Remove grates âand caps, unfasten any retaining âscrews, disconnect the igniter/thermocouple harness if present, swap inâ the new assembly, reconnect wiring, âand restore gas/electric service. If you are not â˘confident or âŁif gas fittings need⢠work, hire a qualified technician.
How should I clean a 9.5L sealed burner without⣠damagingâ it?
Do not soak the sealed burner base in water while âattached. âRemove the burner⢠cap/crown and soak onyl the removable â¤cap in warm, soapy water; scrub gently with a nonâabrasive padâ to removeâ deposits. Use a soft brush or aâ small nylon brush to clear âclogged gas ports. Wipe the burner base with a damp⢠cloth and dry thoroughly beforeâ reassembly. âAvoid⣠abrasive cleaners, âsteel woolor forcing debris intoâ the electrode area-damage there can cause⣠ignition⤠failure.
Why is my burner flame yellow or sooty after installing a⣠new sealed burner?
A yellow or sootyâ flame âŁindicates incomplete combustion. Possible causes: clogged burner ports,â misaligned cap,⢠incorrect burner-to-cap seating, âwrong burner type for the âmodelor an issue âwith gas pressure/air shutter â(air mixture). First ensure the cap âis seated âcorrectly and ports are clean. If the flame remains⣠yellow,stop using⤠the⤠appliance⣠and have a licensedâ technician check gas pressure,the air mixture,andâ any regulator âŁor⢠valve settings.
How do I verify compatibility of â316558300 with âmy Frigidaire⣠range?
Check your appliance model number (usually on a tagâ inside the oven doorâ or âbehind the back panel) and crossâreference âit⢠with Frigidaire parts diagrams or âthe OEM parts website.⢠Ifâ you have access â¤to a parts â˘fiche âor authorized⤠parts dealer,â confirm â¤that â316558300⣠isâ listed for your specific â¤model. â˘When in doubt,⣠provide the range model number⤠to a Frigidaireâ dealer or certified technician before purchasing.
After replacing theâ sealed burner, howâ do I test for â¤safe â˘operation and gas leaks?
After âreassembly âand⤠restoring⣠gas/electric service: (1) visuallyâ inspect connections, (2) apply a⤠soap-and-water solution to gas fittings and watch forâ bubbles while the gas is on (do not â¤use an open flame),â and (3) light the burner and⢠observe â¤flame stability and color (steady⢠blue with small yellow tips is ânormal). If⤠you detect a leak, âpersistent yellow flameor irregular operation, shut off âgas âand contact a qualified⣠service â¤technician immediately.
Should I buy OEM part 316558300 or âŁanâ aftermarket âreplacement?
OEM â¤(Frigidaire) parts are guaranteed to match âoriginalâ specifications â¤and typically âŁfit without⢠modification; they âmay also carry a manufacturer⣠warranty. Aftermarket parts can be less expensive but vary in âquality and fit. For gas safety and proper performance, OEM parts or high-quality aftermarket parts approved for your model⢠are recommended. If you choose â¤aftermarket, verify fitmentâ and warranty before purchase.
To âWrap⤠It Up
The 316558300 Frigidaire Ovenâ 9.5L sealedâ burner is a critical component that â¤contributes to reliableâ heat delivery, consistent cooking⢠performanceand safe operation of âcompatible ovens. Designed âto âcontain combustionâ and protect internal âoven components, â˘this sealed âŁburner supports efficiencyâ andâ longevity âwhile minimizing â˘maintenance issues associated with âexposed burnerâ elements.As âan OEM-style part, it helps⣠maintain âfactory-caliber performance â˘and fitment when âŁused inâ the specified frigidaire models.
Because burner problems canâ affect safety âand appliance âfunction, accurate âdiagnosis and timely replacement are important. Technicians âand owners â¤shouldâ evaluateâ symptoms such as uneven heating,â ignitionâ failures, â˘or signs of â¤corrosion before deciding to replace the burner; where âtesting indicates failure or safety concerns, installation⤠of a correct replacement part by a qualified service professional is recommended. âProper diagnosis and⢠use of compatible components help â˘restore performance,reduce â¤the riskâ of further damage,and maintain safe operation overâ the âŁlong term.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
