241860810 Frigidaire Refrigerator âIce Containerâ Assembly âis a factory-designated âice storage and delivery component â˘used in âcompatibleâ Frigidaire freezers and refrigerator-freezer combinations; it⣠functions âas⤠the primary â˘receptacle for ice⢠produced by the⣠automatic ice maker and as the interface between the ice-making mechanism and any manual or powered âdispenser⤠hardware. The part is typically aâ molded thermoplastic binâ or âhousing⢠with integration points for â˘mounting,⣠chutes⢠or guides for⣠ice routing,⤠and provisions⤠to mate with augerâ or dispenser components were fitted.
Inside the appliance⢠the âŁice container assembly⤠serves several mechanical and âŁelectrical roles:⤠it⢠receives⢠discharged â˘iceâ from the ice maker, retains⢠and isolates⣠ice⣠at âŁfreezer temperatures,â and guidesâ or⢠feeds that ice to a⢠dispenser⣠or door-mounted delivery⤠mechanism. The assembly commonly interacts with⢠the ice maker module (mechanical release andâ timed harvest), âdispenser/auger drive system (motor, gears or auger), levelâ sensors or micro⢠switches (to detect full/empty conditions)and âthe refrigerator doorâ and â¤sealing surfacesâ (to maintain âcold âand prevent moistureâ intrusion). Its performance âaffects ice flow characteristics,â dispenser loadingand can âŁinfluenceâ frost accumulation âandâ door seal integrity.
In thisâ article readers will âfind a technical overview ofâ the 241860810 â¤ice container assembly’s function and typical construction, guidance on âŁverifyingâ compatibility with â¤refrigerator⤠model numbers and mounting interfaces, a list of common failure symptoms (cracks, broken mounting tabs, âice bridging, dispenser âjamsor sensor faults), stepwise âtroubleshooting checks to âisolate mechanical⣠versus electrical issuesand practical replacement âconsiderations such as â¤inspection ofâ surrounding âcomponents, securing correct OEM partâ numbersand âpoints to verify âduring reassembly to ensure âreliable operation.
Table of âContents
- Function â˘and Role of the Refrigerator Ice Container âAssembly in⣠Frigidaire Cooling Systems
- How the 241860810 Frigidaireâ Refrigerator Ice Container Assembly Integrates âwith âŁthe âIce Maker and Operates During Freeze/Harvest Cycles
- Common Failure Symptoms and Diagnostic Indicators for Ice⢠Container âPerformanceâ and Ice Delivery issues
- compatibility, âŁReplacement âConsiderations and Installation âChecklist for the 241860810 Ice container Assembly
- Q&A
- Finalâ Thoughts
Function and Role of the Refrigeratorâ Ice⤠Container Assembly in Frigidaire â¤cooling Systems
241860810 Frigidaire⢠refrigerator⣠Ice Container Assembly ⤠is the molded ice-storage bin and interface component that â˘receives frozen cubes from the ice maker, holds them in the freezer âŁcavityand aligns ice with the auger or â˘dispenser door for âdelivery. Functionally, the âassemblyâ provides âŁthe mechanical mounting⤠points âand the full-bin/dispense-actuator interfaces that allow the ice⢠maker⤠to stop productionâ when the â˘bin is full and permit the auger âmotor or manual access to engage⢠when dispensing.⢠In many âFrigidaire upright and side-by-side configurations⣠this â˘part also controls⤠airflowâ and drainage pathsâ around â¤the ice collection⤠area⣠to⤠reduce bridging and âŁfrost buildup; any â˘deformation âof the âbin,broken tabs,orâ misalignment can interrupt â˘those⢠behaviorsâ and cause jams,overproduction,or leaks.
- Common symptoms of failure: ice jamming at the chute, continuous ice production⢠(full-bin switchâ notâ tripping), visible cracks or warped mounting tabs.
- Behavioral âdependencies: correct engagementâ with the auger drive, âactuator â˘arm âposition,⣠andâ freezer liner sealing âareâ required for predictable dispense âcycles.
- Practical checks: verify actuator travel,⤠inspect âfor ice⢠bridgesand confirm âpart â¤seating before replacingâ the⤠ice âŁmakerâ itself.
The â˘assembly is typically injection-molded ABS or âa similar low-temperature polymer to âresist cracking at freezer temperatures while minimizing heat transfer from the cabinet; material choice affects stiffness and theâ ability of the bin â¤to retain âshapeâ under load. For technicians âand owners, replacing the 241860810 unit isâ a mechanical repair:⢠match âmodel â¤numbers and mounting geometry ârather â˘than relyingâ on generic⢠bins, because small differencesâ in tab position âor sensor boss location will alter switch actuation.â Basic maintenance âincludes periodic removal andâ defrosting of compacted ice, inspection ofâ the auger coupling and full-bin actuatorand âreplacing theâ assembly if tabs or â¤the⤠discharge chute are damaged; these⢠actions restore correct mechanical sequencing between ice production and dispensing andâ reduce repeat service calls.
| Item | Description |
|---|---|
| part number | 241860810 |
| Function | Ice storage, dispenser â˘interfaceand full-bin actuation |
| Material | Low-temperature polymer â(commonly ABS) |
| typical failure modes | Cracked⢠bin,â broken mounting tabs,â misaligned âactuator,⢠ice⢠bridging |
| Diagnostic âchecks | Actuator â¤travel, âauger âŁengagement, seating/alignment with freezer⣠liner |
How the 241860810 Frigidaire Refrigerator Ice Container âŁAssembly â˘Integrates with the Ice Maker andâ Operatesâ During Freeze/Harvest cycles
The 241860810 Frigidaire Refrigerator Ice Container Assembly is the⢠molded bin andâ mechanical interface that receives ice releasedâ by the âice maker module⢠and provides the level feedbackâ that controls â¤production. âIt mountsâ directly⣠beneath the ice maker’s âejector âŁpath, aligning with â˘the ejector âfingers and⤠any âchute or âgasket⢠so cubes drop cleanly into theâ bin; âmany compatible⤠Frigidaireâ designs use a mechanical trip arm or simpleâ optical/infrared sensorâ integrated âwith âŁthe bin to signal the appliance controller when the âcontainer reaches capacity. Correct⤠installation requires the⣠bin’s mounting tabs to engage theâ freezer liner slots âand âthe drop lip âto align⢠with the ejector clearance⣠to avoid interference with the⣠motor and heater âfunctions of âthe ice maker assembly.
- Mounting âinterface: molded⢠tabs and retention â¤slots that â¤ensure repeatable alignment.
- Sensor interaction:⣠mechanical arm or optical switch that interrupts ice-maker cycles⣠when full.
- Functional role: capture harvested âcubes, prevent re-entry to âthe â¤ejectorand provide âlevel âfeedback.
- Common field issues: misalignment, frost bridging/clumping, cracked lips that allow jams âor leaks.
During⢠the freeze phase the ice maker⣠fills and freezes water in the mold; â¤during theâ harvest phase a brief heater cycleâ and theâ ejector motor remove â˘cubes from â¤the mold⢠and push themâ down⤠into the ice container.The container’s design must preserve a clear drop⢠pathâ andâ allow adequate internal clearance so cubesâ do ânot âcontact the ejector duringâ rotation; if the bin is warped, â¤clogged with⤠frost, â˘or its sensor is defective, the controller can either stop production prematurely or continue producing until overflow âor âmotor strain occurs. Technicians troubleshooting harvest-cycle problemsâ should⢠verify bin seating and gasket condition, âinspect the levelâ sensor for â¤correct actuationandâ check forâ ice bridging-simple âcorrective actions often restoreâ normal âoperation without replacing the iceâ maker⢠itself.
| Item | Description |
|---|---|
| Mounting â˘interface | Molded tabsâ and lip that align â¤with freezer liner slots and the ice maker⢠ejector path |
| Level feedback | Mechanical trip arm or optical switch integrated with âbin âto signalâ ice-maker control |
| Primary â˘function | Receiveâ harvested cubes,⢠prevent jamsand provide capacity signaling |
| Typical failures | Warped lip, frost bridging, âŁsensor failureor debris âinterferingâ with cube âdrop |
Common Failure Symptoms â˘and Diagnostic⣠Indicators for Ice Container⢠Performance and Ice Delivery Issues
The 241860810 Frigidaire Refrigerator ice Container Assembly functions as the receptacle and feed mechanism between the icemaker⤠and âŁthe dispenser. Itâ captures â¤frozen âŁcubes from theâ icemaker, âaligns them for â¤the auger or⣠chute,â and provides the mechanical coupling and seals required to prevent ice bridging and â˘moisture ingress. âŁWhen compatible⤠andâ properly â¤seated, â˘the container â¤maintainsâ the â˘correct⤠clearances and âŁdrive â¤engagement; installing a nonâmatching bin or a warped container âcan âcreate mechanical binding, premature wear on theâ dispenser âdriveor intermittent feedâ failures that mimic motor â˘or⤠controlâ faults.
- intermittent or no⣠ice dispensing – auger â˘rotates without â˘delivering ice or âmotor stalls.
- Ice bridging or âŁclumping âinside the bin â- âlarge masses that prevent âfeed and cause overflow.
- Unusual⤠grinding or knocking noises during dispense -â misaligned driveâ coupler orâ broken fins.
- Frost or water pooling at âseams -⢠cracked â˘housing⣠or âŁdamaged âseals allowing melt/refreeze cycles.
| Item | Description |
|---|---|
| Ice jam | Visible blockages near the chute or auger; check for oversized cubes,⢠crushed iceor foreign objects. |
| Drive disengagement | Wornâ or broken âŁcoupler/teethâ will âŁallow⣠the motor to spin without moving the auger; inspect coupling geometry. |
| Thermalâ cycling symptoms | Unevenâ frost⢠patterns indicate âtemperatureâ control,⣠causing melt/refreeze that forms clumps-verify âfreezerâ thermostat and doorâ seals. |
Diagnosing issues requires bothâ visual âinspection⤠and functional âŁtests:â verify freezer temperature and run theâ dispenser cycle to observe auger motion and listen âfor abnormal sounds, remove the container to⢠inspect mating surfaces âŁand couplers â¤for wear or deformationand check that âŁthe âbin seats squarely and the dispenser microswitches âengage. For âfield repairs, replace cracked housings, worn couplers, âor⤠incompatible bins⤠rather than⢠repeatedly operating âa⤠flawed assembly; thisâ reduces collateral damage to the dispenser motor andâ prevents recurrentâ failures that presentâ as intermittent⣠or degrading â˘performance.
Compatibility,Replacement Considerations and Installation Checklist⢠for the 241860810 Ice Container â¤Assembly
Theâ 241860810 Frigidaire Refrigerator Ice Containerâ Assembly⣠is the molded⢠ice storage and â¤transfer housing that accepts iceâ from âŁthe icemaker,protects â¤the⤠ice column from freezer airflow,and interfaces with âthe âŁdispenserâ or auger system â¤to releaseâ ice. â˘Functionally, the assembly must match the refrigerator’s âmounting bosses, outletâ geometryand any⤠integrated flaps or sensor mount points so the ice feed and⤠dispensing mechanisms operate without binding. In practice this means verifying âthe bin’s locator pins and screw positions, the shape of âthe chute âŁopeningand the presence â˘orâ absence of anâ auger coupler or dispenser drive â¤interface before installingâ aâ replacement;â differences in those⢠features are the â¤most common âcauses â¤of ânoisy operation, â˘jammed â˘ice deliveryor misaligned sensors.
- Mounting âengagement: Confirmâ locator pins andâ screw bosses align with the freezer â¤liner and that any clip-retainers are intact.
- Drive⢠interface: âCheck whether the⤠bin must engage an auger coupler, a motor shaftor simply present ice to â¤a⢠manual door.
- Sensor âand flap alignment: Ensure optical or⣠mechanical sensors⤠and the chute door seat correctly to avoid false-empty signalsâ or⢠ice âleakage.
- Physical⢠integrity: âInspect for cracks, warpedâ sealing â˘surfaces, âor worn tabsâ that could âallow ice compaction or thermal â˘leakage.
- Functional test: Afterâ installation, cycle the dispenser/auger with empty bin⣠then with a test charge ofâ ice to⤠verify unobstructed flow.
| Item | description |
|---|---|
| Part | 241860810 Frigidaire Refrigerator Ice⢠Container Assembly (molded bin and chute housing) |
| Key interfaces | Mounting bosses, chute geometry, auger/drive âcoupler âlocation, sensor mounts |
| Common symptoms | Ice jams,â noisy dispensing, false-empty⤠sensor,⢠leaks around⢠bin mouth |
When replacing the⤠assembly, use the checklist items⣠above and confirm⣠compatibility with the refrigerator’sâ model â˘series rather than assuming interchangeability by visual â˘similarity. âŁSuch as, âa bin that fits the freezer cavity but lacks âŁthe⢠correct auger âcoupling will slide into place but will not transmit torque to âthe auger; conversely, a bin with diffrent chute dimensions can abrade the dispenser doorâ or trap ice. Final âinstallation⣠should include tightening specified fasteners to the original torque where available, validating sensorâ continuity⢠or alignmentand verifyingâ correct operation across several dispense cyclesâ to âŁensure the â˘ice containerâ functions reliably in âthe âsystem.
Q&A
What is the 241860810 â¤Frigidaire Refrigerator Ice Containerâ Assembly?
The â˘241860810 is an OEM replacement ice âcontainer assembly âmade forâ certainâ Frigidaire refrigerators. â¤It is the removable bin/housing thatâ storesâ ice⣠produced by the freezer ice⢠maker â˘and,â depending âon model, â¤may⤠interface with the âŁaugerâ or dispenser mechanism. Exact included components (bin only vs.⢠bin plus auger/housingâ cover or motor) can vary âby listing-always verifyâ the âpart description before purchase.
How do I know if this âis the correct part âfor â¤my refrigerator?
Check your refrigerator modelâ numberâ and âthe part number âcurrently â¤on the old ice bin â˘or in âthe service manual.â the safest âŁmethod is to enter your refrigeratorâ model number on Frigidaire’s parts website âor âcontact an authorized parts â˘dealer and confirm that 241860810 is compatible. If you âstill have the âoldâ bin, â¤compare mounting features, electrical âŁconnectors (if any)and dimensions.
Can I â˘install the 241860810 myselfand âwhat⣠tools are required?
Many owners can install this part themselves. Typical steps: âunplug â˘the refrigerator or turn off power,⢠remove the oldâ ice container â˘(usually by â¤pulling it straight âŁoutâ or releasing a latch), position â¤theâ new assembly into the â¤tracks/tabs and push until âŁit seats. â˘If the assemblyâ includesâ electrical connections (e.g.,⤠for an⢠auger motor), unplug and replug â˘the mating⣠connector. Tools ârequired âare⣠usually minimal-screwdriver â˘or nut driver âonly if âscrews â¤secure the âhousing. Always followâ the model-specificâ service instructions andâ disconnect âpower before working.
My⣠ice dispenser⤠is jamming after installingâ a new âice container-what should I check?
First, confirm âthe âbin is fully seated and â¤aligned so the auger and dispenser chute engage properly. Check for obstructions â˘(ice clumps,foreign objects)⣠and large⤠cubesâ that can wedge the auger.if the binâ assembly includes theâ auger or motor, ensure the wiringâ plug⤠is secure⣠andâ that the motor spins freelyâ by âŁhand (with power â¤off).Also check the dispenser actuator and âŁmotor for proper operation. If the auger⣠motor hums but won’t rotate,⤠gears may be stripped or⤠the motor may â˘beâ faulty.
How doâ I clean andâ sanitize the 241860810 ice container?
Remove the âbin from âthe freezer, dump any iceand wash with warm water⣠and mild dish soap. Rinseâ thoroughly andâ dryâ completely before reinstalling. Avoidâ abrasive cleaners,strong âsolvents,or chlorine bleach on plastic âparts (follow Frigidaire guidance). â˘If the âbin has crevices, âŁuse a soft⣠brush âto remove scaleâ or âdebris. Allow the bin⤠toâ reach freezer temperature before adding ice to prevent premature melting.
Will replacing the iceâ container fix small or hollow âice cubes,⤠or ice â¤that meltsâ and⣠refreezes?
Not⢠necessarily. Small or â˘hollow cubes âŁand â¤refreezing issues are⢠usually caused by ice makerâ settings, freezer temperature,⣠or âŁintermittent âŁmelting â(door left open, poor door sealor warm airflow). Ensure âŁthe freezer is set to the recommended temperature â¤(around 0°F / -18°C), inspect door gaskets,â and confirm âtheâ iceâ maker⣠is cycling correctly. Replacing⤠the binâ solves mechanical⣠storageâ or dispensing problems but won’t correct temperature or âŁice-production â¤issues.
Do replacement 241860810 assemblies come⢠with a⤠warranty andâ where can I⢠buyâ one?
Warranties depend on the seller-OEM â˘Frigidaire parts sold through authorized dealers frequently enough⤠include aâ limited parts warranty, while âŁthird-party sellers may offerâ different terms. âŁBuy from Frigidaire’sâ official parts⢠store, authorized âappliance âparts dealersor⤠reputable online âretailers. âŁWhen â¤ordering,â provide your refrigerator model number â˘and confirm the return policy and warranty length.
Is there anything â˘I should inspect on the oldâ ice container before throwing it âaway?
Yes.â Check âfor âbroken tabs, crackedâ mounting â˘points, stripped gear teeth⣠(if visible), damaged electrical connectorsand â˘excessiveâ ice contamination (mold or mineralâ buildup). Ifâ the auger or motor was mounted toâ the old bin and still works,note â¤whether that component is âŁtransferred to âŁthe⤠newâ assemblyâ or whether you âneed to order it separately. Document any âdamage or wear to help diagnose ârelated dispenser âŁor âŁice-maker failures.
Final Thoughts
The 241860810 Frigidaire Refrigerator âIce Container âAssembly serves as⤠the designated collection and storage component for âice produced by⣠compatible â˘Frigidaire⣠ice-making systems. â˘Properly fittedâ and â¤functioning, this assembly âŁhelps maintain⤠efficient âice dispensing, preserves sanitary conditions by âcontaining and protecting iceand contributes to the overall⤠reliability âof the ârefrigerator’s ice-making subsystem. Because âit interfaces⢠with â˘mechanical components and sensors,⣠the condition⢠and correct⢠installation of the ice âcontainer can⣠affect performance, prevent jams or leaks,â and â˘support consistent ice production.
Accurate diagnosis âand timely replacement of âthe 241860810⢠Frigidaire Refrigerator ice Container⢠Assemblyâ are critically important when performance⣠issues are observed. Confirming that the containerâ itself⣠is the root cause-rather than ârelated components such as water supply, sensor calibrationor dispenser âmechanisms-helps avoid needless âparts changes and ensures the repair addresses the actual failure. when replacementâ is required, using the correct âpart number and following manufacturer guidance or⣠qualified service practices maintains âcompatibility and âsafety.â Prompt, âappropriate action âpreserves⤠appliance efficiency and reduces the risk ofâ secondary problems, supporting long-term reliable âŁoperation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
