316558300 Frigidaire Oven 9.5L Sealed Burner is a sealed burner assembly specified âfor certain Frigidaire ovens and ranges; it is a primary combustion component⤠designed to generate and distribute heat within the oven cavity while maintaining a sealed interface between the burner ports and the oven floor. As a â˘sealed burner, the assembly combines the burner head, ports/orifice â˘interfaceand mounting/sealing features into a single replaceable unit intended to control flame shape and âlimit ingress of spills into the burner chamber.
Functionally, the sealed burner interfaces âwith the appliance gas manifold and gas valve, the ignition system (spark or hot-surface igniter), âand the⤠oven temperature regulation system (thermostat or electronic control). Its design âŁdictates flame geometry, combustion stabilityand heat flux to the cooking cavityand it â¤must be matched to the appliance’s fuel typeorifice sizing and mounting geometry to achieve correct combustion. The sealed nature of the part also affects maintenance and service procedures-sealing surfaces, port cleanlinessand alignment influence flame characteristics and safety-related features such as flame âsensing and proper venting.
In â¤this article⣠you will find a technical overviewâ of the 316558300 sealed burner: how it operates, the systems⣠it interacts withand the manufacturer’s⤠designation conventions (including what the 9.5L variantâ denotes as âa size/variant). The guideâ will cover compatibility and verification steps, common failure âsymptoms (for example poor ignition, uneven heating, yellow or sooty flames, gas odor), systematic troubleshooting and diagnostic checks (visual inspection, ignition and âcontinuity testsorifice and pressure checks, leak testing)andâ practical replacement âconsiderations (matching part numbers,â fuel-typeâ and orifice requirements, sealing andâ mounting â¤checks, âandâ safety precautions to followâ during service).
Table of Contents
- Functional Role and Performance Specifications of the Sealed Burner Assembly
- How the 316558300 Frigidaire oven 9.5L Sealed Burner Operates: Gas⤠Flow, ignition Sequenceand Heat Distribution
- Commonâ Failure Symptoms and âdiagnostic Indicators: Igniter Faults, Gas Flow Restrictionsand Seal Degradation
- Model Compatibility, Replacement Specifications, Installation Procedures,â and⤠Troubleshooting Checklist for Field Service
- Q&A
- The Way Forward
Functional Role and Performance Specifications of the Sealed Burner Assembly
The 316558300 Frigidaire Oven 9.5L Sealed Burner functions as âthe âprimary gas-distribution and combustion interface for compatible Frigidaire ovens.⣠Its sealed design channels gas through a specific pattern of ports â˘and maintains a controlled air/gas mixture at the burner face, which produces a repeatable flame geometry and heat pattern inâ the oven cavity. the assembly also âprovides mechanical mounting points and an insulated interface for the ignitor/electrode; correct alignment and orifice⢠sizing are required to reproduce factory âcombustion characteristics. In repair scenarios, technicians replacing this assembly must confirm electrical connector type, mounting hole â¤locationsand âorifice or valve compatibility to avoid changes in flame stability or oven temperature profiles.
performance⣠expectations for the sealed burner center on stable ignition, consistent port-to-port flame lengthand resistance⢠to blockage from spills and soot. Typicalâ failure modes that affect performance includeâ clogged ports, corrosion of the burner face, degraded seals that allow oven debris into the burner boxand misalignment of the ignitor gap causing⤠intermittent ignitionâ or prolonged glow time. Practical diagnostics include visualâ inspection⢠of port shape âand cleanliness, measuring ignitor resistance and observing flame pattern during steady-state operation. â˘routineâ maintenance is limited to cleaning port obstructions and replacing gaskets or âthe entire sealed burner when warping or corrosion alters gas flow characteristics.
- Sealed flange and gasket to prevent âŁspill ingress
- Port geometry designed for even flame distribution
- Mounting points and orifice interfaces matched to OEM specs
- Ignitor/electrode receptacle for secure electrical connection
| Item | Description |
|---|---|
| Part | 316558300 Frigidaire Oven 9.5L Sealed âŁburner – OEMâ replacement with specific mounting and port pattern |
| Primary function | Distribute gas to defined ports â˘and protect internal burner area from spills |
| Common symptoms of failure | Uneven heating,⢠delayed ignition, visible soot or corrosion,â flame impingement |
| Field⣠checks | Inspect ports for blockage, verify ignitor â˘gap and âconnectors, confirm secure mounting and intact seals |
How the 316558300 Frigidaire Oven 9.5L Sealed Burner Operates: Gas Flow,Ignition Sequence,and Heat Distribution
The 316558300 Frigidaire Oven 9.5L Sealed⢠Burner controls âgas delivery through a direct path from the range manifold â˘to the burner ring, with a calibrated orifice setting that determines the maximum flow rate. When a cooktop control isâ actuated the valve allows manifold pressure to reach the orifice; an electronic ignition module simultaneously energizes the spark electrode, creating a high-voltage discharge at the âŁburner ports. Once âa stable flame is established the âappliance uses flame sensing (rectification or a⣠thermocouple/thermopile depending on model) to confirm combustion and maintain the safety valve in the open position. Typical field âsymptoms such as continuous clicking with no flame, a weak â˘yellow flameor intermittent shutdown most⣠often âtrace to a fouled orifice, misaligned electrode, inadequateâ manifold pressureor a â˘failing igniter assembly rather than âthe sealed burner⤠casting itself.
The sealed burner design focuses âflame at the cookware and⢠minimizes ingress of spills into the burner box, which â¤affects heat distribution by concentrating convective and radiative heat upward rather than laterally.Heat transfer uniformity depends on correct port geometry, intact baffles and properâ cookware placement; a partiallyâ blocked port pattern will produce hot spots and reduced overall output. Technicians replacing or servicing this assembly should verify manifold pressure, use the correct orifice size â˘for the appliance modeland confirm âelectrode gap and flame-sensing continuity to restore original performance. Practical checks include measuring flame height and color at a âknown pressure, confirming the ignition sequence outlined belowand ensuring the burner gasket seals to prevent â˘draft-induced flameâ distortion.
- Ignition⤠sequence: 1) control signals valve,â 2) valve begins controlled flow,⣠3) igniter creates spark, 4) â˘flame established and sensed, 5) safety valve latched â¤open; if sensing fails the valve closes.
| Item | Description |
|---|---|
| Supply pressure | Standard domestic manifold (~5″ âŁWC forâ natural âgas; check LP â˘conversion specs) |
| orifice size | Model-specific drill âŁsize that governs BTU output; must match appliance rating |
| Flame sensing | Rectification or thermocouple input used to confirm flame and permit valve to remain âopen |
| Compatibility | OEM replacement for compatible Frigidaire 9.5L ranges; verify âpart number and conversion kits before installation |
Common Failureâ Symptoms and Diagnostic Indicators: Igniter Faults, Gas Flow Restrictions,â and Seal Degradation
The 316558300 Frigidaire Oven 9.5L Sealed Burner functions as an integrated combustion and sealing assembly that stabilizes burnerâ airflow and prevents foodâ and liquid ingress⤠into the burner chamber. In practice this part interfaces directly with the âigniter, safety manifold valveand oven gasket; an âŁigniter that fails to reach its required current will not draw theâ safety valve open even if gas is present, producing symptoms such as prolonged sparking, delayed ignitionor âno ignition at all. Technicians typically verify igniter performance with a clampâ meter (watchingâ for the specified milliamp draw) and a⣠multimeter for continuity; these measurements,combined with a visual inspection of the âŁburner surface and electrode gap,distinguish an⢠electrical igniter fault⤠from a gas delivery or valve problem.
Gas flow restrictions and seal degradation produce a â˘seperate set of diagnostic indicators. Restricted flow from a partially blocked orifice, kinked supply lineor regulator fault often shows as a weak, yellow or lifting flame, slower preheat, reduced steady-state temperatureor soot deposits on cookware; technicians confirm theseâ by checking manifold â¤pressure with a manometer and inspecting the orifice and supply tubing. Degraded⤠oven seals allow convective⣠losses that change baking profiles and can alter combustion air balance at the burner, so âmeasuring temperature drift⢠during⣠a â¤controlled âbake cycle and performing âŁa simple smoke or infrared leak check around the doorâ and âburner perimeter helps isolate gasket failure from combustion issues.
- Common symptoms: continuous clicking,delayed ignition,yellow or âŁsooty â˘flame,gas⤠odor,unevenâ heating,long preheat times.
| Item | Description |
|---|---|
| Igniter | Check continuity and milliamp draw; insufficient â˘current indicates replacement. |
| Orifice/Manifold | inspect for blockage and measure manifold pressure; restrictionsâ cause weak flame and poor heat. |
| Seal/Gasket | Inspect for cracks/compression loss and measure temperature âŁstability during a â¤bake cycle. |
Model Compatibility, Replacement Specifications, Installation âProceduresand Troubleshooting Checklist for Field Service
The 316558300â Frigidaire Oven 9.5L Sealed Burner is an OEM sealed-burner assembly designed⣠to isolate the burner throat from theâ oven cavity, minimizing spill intrusion and stabilizing primary air flow for consistent âcombustion. In field service, âtechnicians must verify compatibility by matching the oven model tag, manifold port spacing, igniter connectorâ typeand the burner orifice size and thread type; mismatched orifice diameter or gas-type (natural vs.â LP) will alter flame⤠characteristics and heat output. The sealed design affects access and gasket sealing: the burner seats against a flange and compresses a high-temperature gasket to maintain a sealed combustion âŁchamber,â so mechanical fit and seal integrity are as critical as matching gas specifications during â¤replacement.
Standard replacement and diagnostic practice includes isolating gas and electrical supplies, removing the cooktop or access panel, âŁdocumenting connector positionsand transferring⣠or replacing the orifice⢠and â˘gasket as part of the assembly swap. After reassembly,perform a leak test at manifold fittings,confirm correct igniter operation and flame appearance⢠(stable,blue core with minimal yellow tipping),and run âŁa short temperature-riseâ verification to confirm consistent heat delivery. âForâ troubleshooting, check for clogged âorifices, degraded⣠gaskets, loose manifold fittingsand faulty igniters; record observed symptoms and measurements (manifold pressure, voltage at igniter) before replacing components to avoid needless parts changes.
- Symptom: Weak or uneven flame – âCheck orifice cleanliness, correct orifice sizeandâ manifold pressure.
- Symptom: Delayed ignition or continuous clicking – Inspect igniter voltage and alignmentand ensure the burner head is âseated â¤correctly.
- Symptom: Sooting or yellow flame – Verify gas âtype/orifice match and inspectâ combustion air pathway for blockage.
- Safety check: After installation, perform a soap-bubble leak test on all gas fittings and confirm â˘no⢠odor of gas before restoring service.
| Item | Description |
|---|---|
| Part | 316558300 Frigidaire Oven 9.5L Sealed Burner – sealed burner assembly âŁfor compatible Frigidaire gas ovens |
| Key⢠checks | Model tag âŁmatch, manifold port spacing, igniter connector typeorifice size and gas type (NG/LP) |
| Typicalâ tools | Adjustable wrench, nut drivers, manifold pressure gauge, multimeter, leak-detection solution |
Q&A
What is the 316558300 Frigidaire 9.5L sealed burner?
It is⣠theâ large ⣔power” surfaceâ burner assembly used on many Frigidaire gas â˘ranges⢠(often referred to as a 9.5″ burner). A sealed âburner is designed so the burner base and cooktop form a seal to prevent spills from entering the range. The part includes the burner head andâ cap (and in some configurations the⢠burner base); â¤confirm exact content by checking the part listing for number 316558300.
How do Iâ confirm this part fits my range?
Check your appliance model number (usually on âa tag⣠behind the oven door, drawer or console) and âŁcompare it to the⢠parts list for that model.â You can also compare the part number printed on the existing burner or measure the burner diameter (approx. 9.5 inches for this power burner). If in doubt, contact Frigidaire⣠or an authorized parts dealer with your full model number to verify compatibility.
What are the safe steps to remove and replace the sealed burner?
Turn off the range⣠power and the gas supply before starting. Remove grates and burner caps, then lift the burner âŁhead straight up – many sealed burner heads simply lift off, though some models may have a retaining screw⤠or clip. Replace with the new assembly, ensuring the burner cap seats correctly and any orifice/nozzle is aligned. Restore gas and power, then test for correct ignition and flame.If the burner or orifice is threaded or attached toâ gas tubingor if you smell gas at any point, stop and call a qualified service technician.
How should I âcleanâ the 316558300 sealed burner to keep flames even?
Remove the grate and burner cap and soak âŁcaps and heads in warm, âsoapy water.Use a soft brush⤠to clear food residue from burner ports; if ports are clogged, gently clear them with a â˘thin, non-metallic tool or aâ fine wire only⢠as recommended by the manufacturer. Do not enlarge ports. Dry all parts fully before reassembly.â Wipe the sealed cooktop surface with a non-abrasive cleaner. Avoid soaking or getting electrical/ignition components wet.
Why does the 9.5L burner show a yellow or lifting flame and how âdo I fixâ it?
Yellow orâ lifting flames indicate incomplete combustion. Common causes: clogged ports, misaligned⤠burner cap, wrong air-to-gas ratio (air shutter/vent issue), incorrect orifice for the gas typeor low/irregular gasâ pressure. First clean and reseat the cap/head. If the problem persists, have a qualified technician check gasâ pressure, air â˘shuttersand confirm the correct orifice for natural gas vs LP. Do not operate a âgas appliance with persistent yellow flames-thisâ can produce carbon monoxide.
Igniter â˘clicks but â¤the burner won’t light – what should I check?
Confirm the burner cap is seated correctly (misalignment⢠can prevent gas from contacting the spark). Ensure the burner and surrounding area are dry. Verify the gas supply is on and other burners light normally. If spark is present but no gas flow, the safety gas valve or orifice might potentially be blocked or failing. Ifâ you smell gas, stop and ventilate the area, shut the gas offand call a technician. For âŁelectrical checking (igniter continuity, spark strength, valve operation), use a â¤qualified technician unless you are trained and equipped to work on âgas appliances.
Can this burner be converted for use with âŁLP (propane)?
Yes, many Frigidaire burners can be converted between natural gas and LP, but conversion requires âinstalling the correct LP orifices/nozzles and possibly adjusting the regulator and air shutters.Conversion must follow the manufacturer’s conversion kit instructions and local codes and should be performed by a qualified technician. Operating a â¤burner on the wrong orifice type is unsafe.
How do I know when the 316558300 burner needs replacement rather than cleaning?
Replace the burner if cleaning does not restore even blue flame,or if you seeâ cracked,warped,severely corroded burner heads or caps,broken ignition electrodes,or damaged/missing ports that cannot be safely repaired. Another⣠diagnostic is swapping the suspect burner assembly with a known-good burner (same position) – if the⢠problem moves with the assembly, â˘replacement is warranted. Always⤠replace with the correct OEM part number âor approved equivalent.
The Way Forward
The 316558300 Frigidaire Oven 9.5L âSealed Burner plays a critical role in maintaining consistent cooking performance, â˘safetyand ease of maintenance in compatible Frigidaire ranges. As a sealed burnerâ assembly,it helps contain spills,promotes even heat distribution,and supports reliable âŁignition and âflame stability-contributions that directly affect cooking results and appliance longevity.
Accurate diagnosis and timely replacement of a failing sealed burner are essential âto preserve oven performance and to⢠mitigate safety risks.â Identifying symptoms such as uneven flame, difficulty igniting, persistent gas odor, â˘or visible âŁdamage should prompt âa measured troubleshooting process, including visual inspection, functional testingand reference to manufacturer guidance. When replacement is necessary,using âthe correct OEM part number⢠and following proper installation procedures âhelpsâ ensure⤠correct fit,performance,and compliance with safety recommendations.
the 316558300 Frigidaire Oven 9.5L Sealed Burner is a key component for âŁreliable operation and safe use of the appliance. prompt and properly performed diagnosis and replacement-ideally following manufacturer instructions or performed âby a qualified technician-will help maintain efficiency, reduceâ the likelihood of further damageand⣠uphold safe operation over the long term.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
