WB28K10190â GE⤠Oven left âFront Orifice is a precision gas orifice assembly used on compatible GE⢠gas ranges and ovens to meterâ teh flow â¤of natural gas orâ propane to the left-front burner. As a small,⣠fixed-diameter component,⤠the⣠orifice determines âtheâ volumetricâ flow rate of fuelâ delivered to the burner â˘and is specified byâ size and⣠thread form to match the âŁappliance manifold and âburner geometry.
Inside⢠the appliance, the left front orifice sits between the âŁmanifold gas supply and theâ burner headand it interacts âcloselyâ withâ the gas⤠valve, pressure regulator, burner portsand â˘the ignition system. Byâ constraining flow at a definedâ cross-section, the orifice helps establish the correct â¤air-fuel ratio for â¤stable combustion; any âchange in orifice size, blockageor seating can alter⢠flame shape, heat output,â and combustionâ qualityand can therefore affect burner performance and emissions.
Thisâ article will describe the WB28K10190 part’s intended function and âphysical characteristics, outline compatibility considerations and how orifice sizing â˘influences performanceand list common failure symptoms âsuch as low or uneven flame,⢠sootingor âdelayedâ ignition. Itâ will also cover diagnostic and troubleshooting approaches relevant to technicians andâ engineers (inspection for debris or corrosion, verification of manifold⣠pressure and sealing)and replacement⣠considerations including correctâ part selection, fitmentand verification against appliance âspecifications.
Table of Contents
- Function⤠and role of the Left Front Orifice in Oven Burner Gas Regulation
- How the WB28K10190 GE Oven Left Front Orifice Operates Within theâ Gas Delivery and Ignition âAssembly
- Common Failure Symptoms and Diagnostic Indicators of aâ Faulty left Front Orifice
- Compatibility, Replacement Considerations and Installation Procedure for the â¤Left Front Orifice
- Q&A
- In Conclusion
Function and Role of the⢠Left Front Orifice â¤in⢠Oven Burner Gas Regulation
The WB28K10190 GE Oven left Front Orifice is a precisionâmachined gas orifice that sets the volumetric flow to the⤠leftâfront burnerâ by presenting a fixed⣠flow area to the downstream manifold pressure. â˘In operation⢠the orificeâ works with the oven’s regulator and valve to âestablish the pressure differential that determines âflow rate; for a givenâ manifold pressureâ the âŁeffective orifice âarea controlsâ BTU delivery â¤andâ flame geometry. because the orifice âŁis a fixed restriction, small changes in diameter or⣠partial blockages produce proportionally large âchanges in flow and visible flame behavior, so dimensional accuracy âand⤠correct seating in âthe burner tube are essential⣠for predictable heating â¤performance.
Replacement or testing of â˘this component requires matching the original orifice size, seat âstyle, âand⣠installation orientation to maintain designed combustion âŁcharacteristics and safety margins.Incorrect sizing or a cloggedâ orifice can cause reduced flame height, yellow⢠tipping,â or delayed ignition and will affect baking uniformity and broilâ output; conversely, installing â˘an orifice⣠intended âfor a different fuel⤠type without adjusting âregulator âsettings will change heat output and⤠can lead to incomplete â¤combustion. Technicians typically verify correct operation with a visualâ flame check and,â when necessary, a âmanometer to confirm manifold pressure afterâ replacing the WB28K10190 GE Oven Left Front Orifice and before returning⢠the appliance to service.
- Operational characteristics: fixed diameter control, interacts with regulator/manifold pressure, sets BTU output for one burner.
- Typical failure⣠symptoms: low or uneven flame, yellow flame âcolour, delayed ignitionor loss of full heat at the leftâfront burner.
- Service considerations: âmatch OEM â˘dimensions and â¤fuel type, âclear debris from âŁburner ports, âŁconfirm manifold pressure and flame shape after replacement.
| Item | description |
|---|---|
| Location | Installed between valve outlet and leftâfront burner tube to provide âa fixed âŁgas restriction. |
| Function | Determines volumetric âŁgas flow for the â˘burner by providing a calibrated orifice area that works with manifold pressure. |
How the WB28K10190 GE Oven Left Front Orifice Operates Within â¤the Gas Delivery and Ignition Assembly
WB28K10190 GE Oven Left Front Orifice is a precision metering jet that controlsâ the â¤gas flow to the⤠left-front⣠burner, acting as âthe primary â¤determinant of â˘that burner’s steady-state BTU output and flame shape. Installed between the⣠manifold/burner tube and theâ burner head, the orifice restricts âŁgas âto a fixed diameter so that, at the expected manifold pressure and fuel type, the correct volume of gas reaches the mixing â˘zone and ignition source. As it setsâ the volumetric flow upstream of the âburner ports, âthe orifice⣠directly affects the air-fuel ratio at the flame, flame⣠lift and stability,â and the timing/behavior of the spark or pilot âignition sequence.
The part’s compatibility and behavior depend on matching the orifice diameter to the oven’s intended fuel (natural gasâ versus LP) and manifold pressure; using the WB28K10190 in a system with the wrongâ pressure⣠or â˘a⢠converted fuel without changing orifice â¤size will create âweak flames,sooting,or ignition delays. Technicians typically inspect the⤠orifice for clogging, correct seatingand proper thread/gasket âcondition during⢠troubleshooting âbecause debris or an improperly seated jet âcan mimic âregulator or ignition faults. Practical indicators⣠that the left-front orifice may âŁbe âat fault include reduced flame height⢠only on â˘that burner, yellow tipping or sootâ on cookware, delayed ignition on that burnerand normal operation of other burners; âreplacing the âorifice with the âspecified âWB28K10190 and verifying manifold pressure restores rated âperformance in mostâ cases.
- Function: fixed-diameter jet âthat meters gas to the left-front burner.
- Compatibility: must match appliance fuel type âand âŁmanufacturer conversion specifications.
- Common symptoms⢠of fault: low flame, yellow/sooty flame, ignition âŁdelay localized to left front.
- Service notes: inspect for debris, correct seatingand use â¤the⣠specified part numberâ when replacing.
| Item | Description |
|---|---|
| Orifice role | Meters gas flow to set burner heat⣠output and flame geometry |
| fuel considerations | Different orifice diameters are â¤required for Natural Gas vs LP conversions |
| Troubleshooting â¤tip | Clean or replace the orifice if one burner is underperforming while manifold pressure âŁis correct |
Common Failure Symptoms and diagnostic Indicators of â¤a Faulty Left Front orifice
The WB28K10190 GE Oven Left âŁFront Orifice is âa âsmall, calibrated aperture that meters gas to the âŁleft-front surface burner on compatible GE ranges.Itsâ diameter and internal profile set theâ local airâtoâfuel ratio for that burner; any restriction,⢠erosion, contaminationor incorrect replacement size changes flame geometry and heat⣠output. Because orifices areâ specific to fuel type and model family, installing an orifice sized for LP on a naturalâgas⢠system (or vice versa) will produce âweak flames, sootingor⣠incomplete combustion andâ can trigger â¤ignition delays or safety interlocks that affect only that zone while âthe rest of âthe cooktop remains normal.
- Consistently⢠small, low-height flame on the left-front âburner despite correct manifoldâ pressure
- Yellow tipping, sooting, âor uneven flame shape localizedâ to the âŁleft-front burner
- Delayed ignition or repeatedâ igniter sparking only at the left-front burner
- left-front element heats substantially slower than⢠other burners onâ identical settings
- evidence of debris, corrosion, âor âa visibly deformed orifice when removed for inspection
Diagnosing a faulty left-front orifice beginsâ with symptom isolation: compare â˘flame behavior andâ time-to-heat between burners, observe flame colorâ andâ stabilityand verify that the burner cap and ports are clean. âŁA practical test is toâ remove theâ left-front cap and visuallyâ inspect or blow out the orifice; âif symptoms persist, swapping the left-front orifice withâ one from a known-good identical burner will determine whether⤠the orifice or another system component (igniter,â manifold valve, regulator) is at â˘fault.Confirm any corrective action âŁby checking the orifice marking against the appliance parts list and by measuring manifold pressure and combustion characteristics against manufacturer specifications before returning the range to âservice.
| Item | Description |
|---|---|
| Function | Metering âaperture that controls gas flow to the left-front surface burner and âŁinfluences flame shape and heat output. |
| Typical diagnostic action | Visual inspection, swapâ test with a known-good orificeand⣠verification ofâ manifold pressure â¤and combustion color against OEM⤠specs. |
Compatibility, Replacement Considerations âand Installation⣠Procedure â¤for âthe Left Front Orifice
The WB28K10190 GE Oven Left â¤Front Orifice is a calibrated â¤gasâ orifice that meters fuel to the left-front burner and directly affects flame size, heat output and â˘combustion âquality at that⢠position. The part⢠must â¤match the oven model’s manifold and gas â˘typeâ (natural gas or â¤LP) and may differ in thread profile or orifice diameter between â¤model âfamilies. Technicians should confirm the appliance⢠model number and⣠whether the oven⢠has been converted for LP before âselecting this orifice; using an orifice sized âforâ the wrong gas type will produce improper flame characteristics and can create âunsafe combustion âconditions.
Replacement and installation require âŁisolating the gas supply, removing the burner cap and head, then unscrewing the orifice from âthe valve or âmanifold with the correctâ tool; some designs use a captive insert while others âthread directly into the⤠valve âbody. After replacement, perform a leak check and observe flame âŁcolor âand stability â¤across a full power cycle; a clean, blue flame with minimal yellow tipping and stable height indicates correct â˘installation. avoid over-tightening the orifice-tighten to manufacturer torque if available-and⢠do not apply thread sealantsâ unless the serviceâ manual specifies âŁtheir use.
- Verify model number âand gasâ type before ordering.
- Shutâ off gas supply and vent area; âwork with adequate⣠ventilation.
- Remove burner components in⣠sequence, replace orifice, then reassemble.
- Test for leaks with approved detection solution âand check flame characteristics.
- Document the change for service records âand future maintenance.
| Item | Description |
|---|---|
| Part | WB28K10190 GE oven Left Front Orifice (match gas type: ânatural or LP) |
| Typical location | Threaded into left-front valve/manifold behindâ burner head |
| Common tools | Screwdriver, appropriately sized wrenchâ or â˘socket, leak detection solution |
Q&A
What is the⢠WB28K10190 left front orifice and what â˘does it do?
The WB28K10190 is the calibrated brass jet (orifice) that meters gas âŁto the left-front burner â˘of certain⢠GE gas ranges/ovens. Itâ screws into the âburner manifold or burner tube and controls the flow rate so âthe burner produces the âcorrect flame for the appliance’s âŁdesign and fuel type.
what symptoms indicate the left front âŁorifice might âbe âbad or clogged?
Common â˘signs are an uneven⤠or weak flame â¤on the â¤left-front burner, a⤠yellow or sooty âŁ(carbon-producing) flame, difficultyâ lighting that burner, âŁaâ flame â˘that lifts off the burner ringor gas âŁsmell near⤠that âburner. â¤These can come from aâ partially or fully clogged orifice, physical damageor incorrect orifice âsize for âthe fuel.
Can I clean the âWB28K10190 orifice or does it need to be replaced?
Often a clogged⤠orifice â¤can be cleaned safely and restored: shut off gas, remove the burner cap and head,⢠then remove the orifice and blow it âout with compressed air or âuse a soft non-metallic pick to remove â˘debris. â˘Do not drill or⣠enlarge the hole.If the orifice is damaged, corrodedor the hole is deformed, replace it rather⤠than trying to repair it.
Is âŁWB28K10190â compatible with my GE model – how can I confirm it’s theâ right part?
Confirm compatibilityâ by matchingâ your appliance model number (on âthe oven/range frameâ or inside the⤠door) to the parts list in⣠the GE parts lookup or the appliance’s service manual. âYou can also compare the existing orifice partâ number or physical appearance⤠to⢠seller listings. when in doubtorder by your⣠appliance model number to ensure⣠a⤠correct OEM part.
Canâ I use âthe same WB28K10190 â˘forâ natural gas and propane (LP)?
No. âOrifices are sized for the fuel type; natural gasâ and LP require different orifice orifices (LP âjets have a much smaller âbore).â If you convert fuel type you must change all burner⤠orifices and adjust the regulator (and follow manufacturer conversion instructions). âFuel conversions should be doneâ by a qualifiedâ technician to ensure safety and correct performance.
How do⢠I âŁreplace the⢠left front orifice safely?
Turn offâ the gas â¤supply and ensure âthe â¤appliance is cool. Remove âŁthe burner cap and head toâ access the orifice. Unscrew âthe â¤orifice with an âŁappropriate⣠wrench, remove the â˘old orificeand install the new one by hand⢠then snug with âaâ wrench-avoid âover-tightening or cross-threading. Do not use sealants that could enter the⤠gas stream. After installation, âperform a gas-leak check âŁand verify proper flame âoperation before regular use.
How âshould I test the burner⣠after installing a new orifice?
Restore gas and perform âa leak checkâ at the connection (soapy water or approved â˘leak detector). Light the left-front âburner and â˘observe flame: it should be steady,mostly blue with minimal yellow âtips,and match the⤠burner’s other working⣠flames in size. if flames are weak âor âyellow, recheck orifice seating, cleaningand that you haveâ the correct⣠orifice for the fuelâ and appliance. If problems persist, consult a technician.
Can I use pipe thread sealantâ or Teflon tapeâ on the âorifice threads?
No. Do not apply pipeâ dope or tape to the orifice bore or threads âin a way that⢠could contaminate the gas⢠passage. â˘Some service instructions advise no sealant on burner orifices because any foreign material can blockâ or alter theâ calibrated flow. If a thread sealantâ is⣠absolutely required for⢠an external manifold connection, use onlyâ the type recommended by the manufacturer andâ avoid getting any material⤠into the âŁorifice.
In Conclusion
the WB28K10190 GE oven left â˘front orifice âis a small butâ critical â˘component that meters the flow⤠of gasâ to the left⢠front burner, helping establishâ the correct flame size, heat output and combustion characteristics for â¤consistent cooking performance. Proper function of this âorifice⣠contributes to efficient fuel use, even heating⣠and âreduced risk of incomplete combustion orâ sooting; âŁbecause âit works as part of a â¤coordinated gas delivery system, its condition can directly affect overall oven performance and safety.
Because symptoms âŁof âa failing orifice-such as uneven flames, difficulty lighting, yellow or sooty flamesor reduced â¤heat-can also stem from other parts (igniters, valvesor regulators), accurate diagnosis âis meaningful before replacing components.When replacement is necessary, using the correctâ WB28K10190 part âand following manufacturer guidelines âor engaging âa qualified technician ensures compatibility and safe restoration of operation. Timely, properly executed diagnosisâ and replacement help maintain appliance efficiency,â cooking qualityâ and occupant âsafety.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
