WB44K5009 GE oven broil Element is a tubular electric heating elementâ designed for use in GE electric ovens and ranges; it is a replaceable highâoutput resistive element mounted at the top of the oven cavity to provide direct radiant heat for broiling.⢠Constructed as a metalâsheathed element with âinternal resistance wire and insulation, â˘the part terminates âin insulated lugs âthat mate with the oven’s⣠terminal block or wiring harness and is rated to operate on the appliance’s mains supply.
Within the appliance, the broilâ element’s role is to⢠convert electrical energy into radiant heat⣠during broiling⢠cycles and to work in⤠concert with â˘the oven control, selector switches or relaysand the oven temperature sensing system. It draws line voltage when the control applies power to the broil circuitand its performanceâ is â˘affected by terminal connections, the integrity of the element sheath (no shorts to chassis)and any thermal safety devices in the oven. Proper installation and electrical continuity are essential for consistent broil performance and â¤for avoiding nuisance tripping or unsafe conditions.
In this â˘article readers will find a technical overview of the WB44K5009’s function and typical â¤specifications, guidance on determining compatibility with different GE models â(matching part number, mounting style and terminal configuration), common failure symptoms to watch âfor (open circuit, hot spots, arcing, lossâ of broil heator tripped breakers), stepâbyâstep âtroubleshooting checks (visual inspection, continuity and resistance measurements, voltage checks at the terminals) and practical replacement considerations (safety precautions,â correct part selection, connector and mounting checksand postâreplacement testing).The information is presented to help technicians, engineers and owners diagnose broilârelated issues and perform a safe, correct â˘replacement when required.
Table of Contents
- Functional⢠role and thermal/electrical specifications of the oven broil âelement
- How the âWB44K5009 GE Oven Broil Element operates inside the appliance
- Common failure symptoms and diagnostic tests for broil element faults
- compatibility, replacement considerationsand stepâbyâstep installation for WB44K5009 and equivalent parts
- Q&A
- Final Thoughts
Functional role and thermal/electrical âspecifications âof the oven broil element
The WB44K5009 GE Oven Broil â¤Element is a straight tubular resistance heater mountedâ at the top of the âoven cavity âthat converts electrical energy into concentrated âradiant heat for broiling andâ highâtemperature finishing. Under normal operation the element glows dull red and produces directional infrared⣠heat,delivering rapid surface browning with minimalâ convective transfer to the rest ofâ the cavity. âIts performance depends on secure electrical connections, correct orientation in the cavity and an intact sheath; physical damage, loose spade terminalsor separation from the mounting bracket will change theâ heat distribution and can produce uneven broiling or â˘visible hotspots.
Electrically,this class of broil element is designed for domestic⣠range supplies and typically operates on a 240 VAC circuit; actual wattage andâ resistance vary âby model and â¤installation. For practical service assessment, measure continuity and cold âresistance âwith a handheld metre-expected cold resistance values for similar elements commonly fall in the midâteens to highâtwenties of ohms, which corresponds to a typicalâ power range of roughly 2,000-3,500 W at 240 VAC. before any inspectionâ or replacement, isolate line power at the breaker and verify terminal insulation and mounting hardware. Practical troubleshooting steps âinclude confirming supply voltage at the oven harness, comparing measured resistance against the âreference range belowand observing whether the element reaches uniform glow during a controlled broil test; if bake elements heat normally while the broil element remains⤠cold, the⤠element or its controlâ circuit should be suspected.
- Fast checks: verify 240 VAC at â¤the element terminals with load removed, measure element resistance,⣠inspect for breaks or âŁblisters in âthe sheathand confirm secureâ spade connector fit.
| Item | description |
|---|---|
| Nominal supply | 240 VAC (household range circuit) |
| Typical power range | â 2,000-3,500 W (variesâ by oven model) |
| Expected cold resistance | â 16-29 Ί (240 V, based on wattage ârange) |
| Typical operating behavior | Radiant infrared emission, visible dullâtoâradiant red when hot |
| mounting & connectors | Top oven cavity bracket with insulated spade terminals; verify orientation and clearance from rack |
How the WB44K5009 GE Oven Broil Element operates inside the appliance
The WB44K5009 GE Oven broil Element functions as the appliance’s upper resistive heater, delivering direct radiant heat for broiling and finishing âdishes. When mains voltage is applied through the oven control or broil relay, theâ element converts electricalâ energy to thermal energy via Joule heating, reaching highâ surface temperatures that produce intense infrared radiation.It is indeed typicallyâ mounted at the top interior of the oven cavity and connects to the⢠oven wiring harness via insulated spade terminals; compatibility for replacement depends⣠on matching terminal spacing, mounting bracket geometry,⤠andâ electrical rating to the original component.
During normal operation the element cycles on and off in response to the control board⢠or timer to maintain target temperature and prevent overheating;â thermal mass and element geometry influence ramp time and how⢠evenly the upper surface heats. Common fault behaviors include open-circuit failure â(no heat), partial heating (hot spots or reduced output)and insulation breakdown or grounding (arcing or tripping protective devices). Technicians should verify terminal voltage during a broil call âŁand check element continuity with a multimeter before replacing the⣠part. Whenâ replacing, use an element⢠with equivalent electrical characteristics and correct mechanical fit to⤠preserve oven performance and safety.
- No heat during broil but bake works -⢠symptom of open⣠circuit in the broil element or a failed broil relay.
- uneven browning or hot spots – can indicate internal breaks or localized corrosion in the element surface.
- Tripping breaker or arcing – possible short to chassis/ground⣠orâ damaged insulation on the element terminals.
| Item | Description |
|---|---|
| Function | Upper âŁoven resistive âelement âproviding radiant heat for broiling and finishing. |
| Connections | Spade terminal electrical connections; match terminal spacing and harness compatibility. |
| Failure checks | Continuity test, terminal voltage during broil call, visual⢠inspection for breaks or blistering. |
Common failureâ symptoms and diagnosticâ tests for broil element faults
The WB44K5009 â¤GE Oven âBroil Element is a resistance heating⣠element mounted at the top âof the oven â˘cavity that âconverts electrical âenergy âinto radiant heat for broiling. Underâ normal operation the element should glow⤠evenly along its length within seconds of applying power; âfailures typically manifest as loss of heat, uneven hot spots, visible breaks in theâ sheath, arcingor⣠repeated tripping âof protective devices.Compatibility issues arise when replacing an element-matching terminal type, mountingâ bracket location, physical lengthand wattage/voltage rating â¤are required to reproduce the original thermalâ output and electrical load on the appliance.
- No glow⢠or no heat at broil settings – element open or power not being applied.
- Partial heating or hot spots – internal coil break or localized shorting within the sheath.
- intermittent operation – looseâ terminal connection or intermittent short to chassis.
- Arcing,sparking,or visible burn marks – dielectric breakdown of the sheath or failed insulation.
- Tripped breakers or blown fuses whenâ broil âselected â- severe short or wrong⣠wattage/voltageâ replacement.
Perform diagnostic tests with the oven disconnected⣠from â¤mains. Start with a visual inspection for breaks,blistering,or discolored insulation. Use a multimeter to check continuity between the two element terminals; a valid element typically measures in the low tens of ohms (varies by wattage-commonly roughly 15-50 Ί for household broil elements).â An open circuit (infinite resistance) indicates a âbroken heating coil. Next measure⣠resistanceâ from each terminal to the metal chassis of the⢠element; any low resistance to chassisâ (near zero) indicates a short to ground and requires replacement. Also confirm the supply voltage at the oven terminal⣠block and inspect⤠terminal lugs and mounting hardware for corrosionâ or loose connections, since poor connections can mimic element faults.
| item | Description |
|---|---|
| Continuity⣠reading | Typical⢠low-tens of ohms (approx. 15-50 Ί depending on wattage); open =â failed element. |
| Insulation to chassis | Very high/infinite resistance = good; measurable continuity to âchassis = shorted element. |
Compatibility, replacement⢠considerationsand stepâbyâstep â¤installation for WB44K5009 and equivalent parts
The WB44K5009 GE Oven Broil Element is âa straight âtubular resistance heater that provides concentrated radiant heat from theâ oven top for broiling. Its function is to convert mains voltage into infrared heat; compatibility is determined primarily by the element’s voltage rating, terminal style (usually two push-on spade connectors), âand the physical mounting â¤tab spacing rather than by part number alone. Common â¤failure modes are an open circuitâ (no heat), visible sheath damage or blisteringand arcing at corroded terminals. For a reliable replacement, verify continuity with a multimeter, compare the new element’s mounting geometry and terminal orientation to the old oneand confirm the oven’s supply voltage and control relay ratings⣠matchâ the element specification before installation.
Disconnect power at the breaker and âverify â¤the circuit âis dead before any work. The⢠basic replacement procedure is mechanical and electrical: remove racks, unfasten the element mounting screws, â¤disconnect the spade terminals while supporting the elementand install the replacement by aligning â˘tabs and reconnecting cleaned or new connectors. after reassembly, perform a short functional test at low broil and observe for uniform redâhot appearance and absence of arcing â¤or sparks.
- Turn off power atâ breaker and confirm zero voltage with a meter.
- Removeâ oven racks and unscrew the element mounting tabs inside the cavity.
- Support the element, pull â˘forward to access and note terminal orientation, then disconnect spade connectors.
- Measure continuity across the element; compare dimensions âŁand terminal spacing to the new âpart.
- Install the replacement, secure mountingâ screws, reconnect terminals with clean/insulated connectors, restore power and test briefly while watching for proper operation.
| Item | Description |
|---|---|
| Part type | Broil â(top)⢠tubular resistance heating element |
| Voltage | Household oven nominal 240 V; confirm with appliance documentation |
| Terminals | Two pushâon â˘spade connectors; inspect for âcorrosion and ensure good contact |
| Mounting | Two tab screws through oven inner liner; match tab spacing and orientation |
| Diagnostics | open circuit on multimeter, visible sheath damageor arcing â˘at terminals indicate replacement |
Q&A
What is the WB44K5009 and which ovens is it compatible â¤with?
The WB44K5009 is an âŁOEM upper âŁbroil element used on many GE ranges and wall ovens. Compatibility varies by modelâ year and series; always verify âfit by checking your oven’s exact model number â¤againstâ the GE parts database or the part â˘listing from an authorized parts supplier before buying.
What are the common signs that the broil⤠element (WB44K5009) has failed?
Typical symptoms include: no broiling or weak broil heat, uneven or spotty broiling,⢠visible âdamage such as breaks, cracks, blisters âŁor exposed inner coil, arcing or sparkingand a⣠burning smell when the broil function is â¤used. If the element doesn’t get hot at âall while the broil is selected, it’s frequently enough open internally.
How do I âtest⣠the WB44K5009 with a multimeter to see if it’s bad?
Turn off power to the oven at the breaker and confirm it’s â¤off. Remove access to the element terminals (usually by pulling the element⢠forward and removing a couple of mounting screws). Set the multimeter to the ohms⣠(Ί) range and measure across the two element terminals -⤠you should see a low resistance (typically in⣠the tens of âŁohms; often roughly 20-40 Ί depending on wattage). An infinite reading âŁ(open circuit) means the element is failed. Also check for insulation failure by measuring from each terminal to the metal chassis; this⤠should read infinite/OL (no continuity).
Can⢠I replace the WB44K5009 myself and âwhat are the basic replacement steps?
Yes, many owners can replace it. Basic steps:â 1) âDisconnect power at the breaker. âŁ2) âRemove oven racks and pull the element forward slightly. 3) Unscrew the mounting screws and carefully pull the element away to exposeâ the wire terminals. 4) Disconnect the wire connectors (note theirâ positions). 5)⢠Connectâ the ânew element’s terminals, seat it into the ovenand reattach mounting screws. 6) Restore power and testâ the broil function.if you’re â˘uncomfortable with electrical work, â˘hire a qualified technician.
What tools and safety precautions are âneeded to replace the broil element?
You’ll typically need a screwdriver or nut driver to âŁremove the mounting screws, pliers to remove wire connectorsandâ optionally a multimeter for testing. Safety: always disconnect powerâ at the breaker before starting, wear gloves to protect from⤠sharp metal edges, allow the oven to cool completelyand avoid touching terminals with power applied.
What resistance âshould I⢠expect from a working⤠WB44K5009 broil element?
A properly functioning broil element will show â¤low resistance, usually in the tens of ohms (commonly around 20-40 Ί depending on âthe element’s wattage). Exact resistance depends â˘on the element’s rated wattage; consult the part specification for a precise value. An open circuit (infinite resistance) indicates failure.
is surface discoloration or small blisters on the element a reason to replace it?
Minor surface discoloration and some small âblistering from normal heating cycles are common and not immediately dangerous. âŁReplace⢠the element if blisters are large, âŁthe sheath is ruptured, the inner coil is exposed,⣠it arcs or sparksor performance is degraded. When in doubt, replace to avoid a suddenâ failure.
How much does the WB44K5009 typically cost and where should⣠I buy one?
Prices vary but the â˘part commonly falls in⣠the approximate range of $20-$60 retail. Buy from GE-authorized parts dealers, reputable appliance parts âŁwebsitesor local appliance shops to ensure you receive a genuine⤠OEM⤠part. â¤Verify part compatibility with your oven model⢠before â¤purchasing.
Final Thoughts
Theâ WB44K5009 GE oven broil element serves a critical role in producing the intense, direct heat required for broiling and contributesâ to overall oven performance. As a primary heating component, it affects browning, searing and certain high-heat baking tasks; deterioration or failure of this elementâ can lead to uneven â˘cooking, reduced âbroiling effectiveness â¤and potential electrical hazards if left unaddressed.
Accurateâ diagnosis and timely replacement âŁare vital to restore⤠safe,reliable operation. Visual inspection and basic electrical âtesting can identify common⣠faults, but confirming the issue and selecting the correct replacement part-such as the WB44K5009-is essential. Proper installation,adherence to safety procedures (including disconnecting power),and consulting a qualified technician â¤when â¤necesary âminimize risk and⣠ensure compatibility with the oven’s specifications.
maintaining and,when required,replacing the broil element with the appropriate WB44K5009 component helps preserve oven efficiency,cooking consistency and safety. Thoughtful diagnosis andâ correct replacement â¤practices protect equipment longevity and support predictable cooking results without compromising electrical or appliance safety.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
