WX28X326 GE 6’â metal â¤Braided Dishwasher Connection âŁKit isâ a flexible water-supply hose assembly used to connect a household water supply âto a dishwasher inlet.⣠The kit typically consists âof a stainless-steel âbraided hose with factory-installed end fittings designed to âmate with standard plumbing connections; its construction provides flexibility, mechanical protectionand⣠a rated barrier to internal â˘water âpressure and temperature â˘common â¤to residential dishwasher service.
Withinâ the appliance system the connection âkit âserves⣠as the primary âconveyance for incomingâ water andâ interfaces directly with the household shutoff valve and the dishwasher’s water inlet valve/solenoid. Because â˘it occupies the fluidâ path upstream of fill controls, its condition and installation affect⢠water delivery, âflowâ rateand leak integrity.â The braided outer sheath resists abrasion and kinking â˘and helps contain⣠leaks at the hose body, while the fittings and sealing surfaces determine connection⣠reliability at both the⤠wall supply and the appliance inlet.
Inâ this⤠article readers will find a technical overview of⢠the component’s function, points of compatibility to consider when selecting aâ replacement (length, end âfittings, pressure âand temperature ratings, âŁand â˘materials), âcommon failure symptoms toâ watch for (visible corrosion, bulging,â seepage at âfittingsor sudden â˘leaks), basic troubleshootingâ checksâ to isolate theâ leak source and verify flowand practical replacement considerations such as shutoff and â¤de-pressurization procedures,â correct sealing practices for the⢠chosen fittingsand inspection criteria to ensure⢠a safe, code-compliant installation.
Table of â¤contents
- Function and âŁRoleâ of the Braided Dishwasher âSupply Line â˘in Appliance Water Delivery and Leak Mitigation
- How the⤠WX28X326 GE 6′ Metal âBraided Dishwasher Connection Kit interfaces with â¤Inlet Valves, Fittingsand water Pressure Systems
- Common âFailure Symptoms: Detectingâ Leaks, Flow Restriction, âHose Swellingandâ Corrosion in the Connection Kit
- Replacement Considerationsâ and installation Procedures: Thread Types,â Torque Specs, Length Fitment, âand Pressure â¤Testing
- Q&A
- In Summary
function and â¤Role⢠of the Braided Dishwasher Supply Line in⢠Applianceâ Water âDelivery and Leak Mitigation
The braided supply line serves as the pressure-bearing conduit âbetween âthe household water feed and the dishwasherâ inlet â˘valveand âthe WX28X326â GE 6′ âŁMetal Braided Dishwasher Connection Kit isâ a typical exampleâ of this component.Internally the assembly pairs an elastomeric âinner tube with a woven protective layer; the stainless-steel braid provides tensile strength, abrasion resistance and limits kinking âŁwhile⣠the innerâ liner manages waterâ compatibility and pressure containment. Because the âhose is flexible âŁand resistant⣠to transverse deformation,it reduces âŁmechanicalâ stress on the dishwasher inlet â˘and supply shutoff,helps absorb⣠vibration and⣠thermal expansion cycles,and allows longer routing (the 6′ length eases â˘installations where the water shutoff isâ remote⣠from the appliance).These mechanical characteristics contribute to leak mitigation by preventing the âŁcommon failure modes of pinching, abrasionand excessive bending at the hose termination points.
- Flexible routing to reduce tension on inlet âvalves and fittings
- Metal braid for abrasion â¤resistance and puncture protection
- Standard threaded/swivel âŁterminations-confirm threadâ type and size for compatibility
- reduces vibration transfer andâ distributes pressure cycles⢠to limit fatigue
Compatibility⣠and practical behavior depend⤠onâ the⢠specific termination type and â˘the appliance inlet geometry; verify âŁthread size and whether the connection uses aâ compression nut, flareor⣠straight-thread fitting beforeâ retrofit. Failure⢠typically initiates at the âferrule or nut interface due to cyclic bending⤠or⣠over-tightening, so installation practice affects longevity: routeâ the hose without⢠sharp bends or contact with sharp edges, âavoid proximity to high heat, secure the hose to prevent âchafing,â and use⢠hand-tight plusâ a controlled wrench turn⢠on swivel nuts ârather than excessive âtorque. Inspect â¤visually⢠for discoloration, fraying of the braidor seepage at joints during routine âŁservice or when moving the appliance; replacing âa braided âŁline is a â˘straightforward preventive action that eliminates â¤exposureâ to gradual degradation modes that can lead to âslow leaks or⣠sudden rupture.
How the WX28X326 GEâ 6′ Metal Braided Dishwasher Connection Kit Interfaces with Inlet Valves, Fittingsand⣠Water Pressure Systems
The WX28X326 GE⣠6′ Metal Braided Dishwasher Connection Kit isâ a flexible â¤stainless-steel supply line that links a â¤household shutoff (inlet) valve to a dishwasher âinlet fitting, providing âŁa corrosion-resistant, kinkâresistant path for cold-water supply. In practice this kit⤠accommodates a⤠range⣠of⤠minor alignment âoffsets and cabinet routings thanks to its braided exterior âand inner â˘hose construction; the 6âfoot length âŁgives installers additional routing options behind âsinks â¤and cabinets without adding pressure loss beyond what is typicalâ for residential runs. Technicians should â¤verify the threadâ and sealingâ method âŁat both ends of theâ hose against the dishwasher inlet and the local shutoff valve and, if necessary, use the correctâ adapter or ferrule â-⤠the hose functions as a flexible mechanical bridge, not as a primary sealing component for â˘mismatched threads.
When connected, the⤠kit transmits household water pressure â¤to the dishwasher inlet and behaves like any flexible connector: it flexes under âinstallation stress, resists abrasion from adjacentâ cabinetryand dampens small pressure surges that occur whenâ the inlet valve actuates.Compatibility considerations include matching â¤the hose end fittings to the âŁappliance inlet and stop valve,ensuring â¤the valve’s compression ferrule and nut are in good condition,and confirming any inline devices (pressure regulators,check valves,or backflow preventers) do not interfere with the dishwasher’s fill sequence. For example, during a replacement swap: shutâ off âthe valve, relieveâ line pressure,â remove the old hose, inspect threads and ferrule, attach the new⢠braided hose hand-tight then secure per the valve manufacturer’s recommendedâ final turn;⤠leakâ checks âunder normal operating âpressure complete the⢠verification step.
- Material & construction: braided âŁstainless⤠steel over an inner⤠elastomeric hose for abrasion⣠and flex resistance.
- Connection considerations: âconfirm matching thread/ferrule types⣠or use appropriate adapters.
- service âbehavior: reduces risk of kinking, accommodates misalignment,â and transmits household water âpressure to the inlet valve.
| Item | Description |
|---|---|
| Length | 6 feet, âprovides extended ârouting âoptions |
| Material | Braided stainless steel outer cover⢠with inner flexible hose |
| typical installation | Between shutoff (inlet) valve and dishwasher inlet; â¤verify fitting compatibility |
Common Failure⤠Symptoms: Detectingâ Leaks, Flow âRestriction, Hose⢠Swellingand âCorrosion in âthe Connection Kit
The WX28X326 â¤GE 6′ Metal âBraided Dishwasherâ Connection Kit functions as the water âsupply link between the householdâ shutoff and â¤the â˘dishwasher inlet, providing a flexible, abrasion-resistant path that tolerates⣠repeated⣠pressure cycles âand normal cabinet-induced bending â˘better than plain vinyl tubing.⣠The braided exterior constrains radial expansion of the inner liner, reducing the risk of burst failures â¤underâ transient pressure âspikes; the⣠assembly is intended for common âŁdomestic dishwasher plumbingâ connections, though installers should confirm end-fitting compatibility âor⤠use appropriate adapters for non-standard valves. In practical installations this kit is used where routing distance, vibration isolationor proximity to heat sources would or else accelerate degradation of a softer⢠supply hose.
Common failure symptoms⢠are diagnostic: external leaks at ferrules or nuts, reduced âinlet flow that lengthens fill times or âtriggers fill-related error codes, visible hose âswelling or bulging where the inner liner has separated from the braidand corrosion or pitting on metal â¤fittings thatâ compromises sealing surfaces. Technicians isolate issues by visual inspection under pressure (looking for wetness, braid frayingor deformation), measuring fill time for flow restrictionand feeling for soft âor âspongy sections along the hose; observed swelling, persistentâ seepage at a compressed fittingor corrosion at the end connections typically⣠warrants replacement âŁof the entire connectionâ kit ârather than ârepair.
- Leakage: water at fittings, damp cabinetsor mineral stains.
- Flow restriction: longer⤠fill cycles,â audible âreduced flowor error codes.
- Hose swelling: bulges or soft spots along the hoseâ length.
- corrosion: rust, âpittingor degraded sealing surfaces on end âfittings.
| Item | Description |
|---|---|
| Leak | Usually caused by â¤damaged inner liner, crimp/nut failureor cross-threaded fittings; inspect under pressure âand replace if â˘persistent. |
| Flow restriction | Internal collapse,⤠debris,⢠or partial occlusion;⣠manifests as extended fill time or âlow inlet flow. |
| Hose swelling | Inner liner delamination or material failure leading to bulging; indicates imminent failureâ and ârequires replacement. |
| Corrosion | Electrochemical âor chemical attackâ on⢠fittings that prevents a proper seal; contaminated connections should be replaced and mating surfaces cleaned âŁor⣠adapted. |
Replacement Considerations andâ Installation⣠Procedures: Thread⤠Types,⤠Torque Specs, Length Fitmentand Pressure Testing
The WX28X326 GE 6′ Metalâ Braided Dishwasher Connection Kit âŁprovidesâ a flexible,⢠stainless-braided supply line intended to bridge the distanceâ between aâ dishwasher inlet and a householdâ shutoff or⢠branch⢠valve.⢠theâ hose â˘itself relies on the mating connection geometry for a âseal: most dishwasher inletâ fittings are âstraight (female) âthreads⢠or âcompression-style fittings that seal against a rubber washer or ferrule, while plumbing shutoffs can be 3/8″ compression, 1/2″ IPS/NPTor other common valve outlets.â Confirmâ the hose â˘end and appliance inlet types before installation;â if the valveâ and appliance use different thread formsâ or sizes, use⢠a purpose-made adapter ârather âthan forcing⤠incompatible threads. Route the 6-foot length to avoid âsharp bends or kinks and⢠keep the hose free âŁfrom contact with cabinetry edges or heat sources so the braid and â˘inner â¤tube remain structurally âsound under âŁcyclicâ pressure and âtemperature loads typicalâ of a dishwasher cycle.
During installation,⢠follow a consistent mechanical procedure: â˘verify matingâ surfaces â¤are clean, fit any required ârubber washer or ferrule perâ theâ connectorâ typeand engage threads by handâ to â˘avoid cross-threading. For most⢠compression andâ straight-thread dishwasher â¤connections, âŁtighten by hand until seated and then apply a wrenchâ for an additional small amount of rotation -â typically about a quarter to a half turn – rather than high âtorque; if⤠a torque value is required by the valve or⤠appliance manufacturer use that specification.â use thread sealant (PTFE⤠tape or compound) only on âtapered (NPT)⤠male threads; do not âuse tape on fittings⢠that seal with a⤠rubber washer⣠or compression ferrule.⣠After connecting, perform aâ pressure test: â¤open the shutoff slowly, run a fill cycle or pressurize to normal household pressure while visually inspecting all joints for leaks for several minutesand, if â¤required by â˘local code, verify âŁintegrity at the system test pressure specified byâ the authority (commonly higherâ than normal supply⢠pressure). âTroubleshoot any seepage⤠by draining, rechecking alignment and washers/ferrulesand âreassembling rather than â˘applying excessive torque.
- Pre-install: match thread type and prepare washers/ferrules.
- Make connection: hand-start threads, then âŁwrench for a â˘short additional turn.
- Sealing: âŁPTFE tape only for tapered/NPT male âthreads; avoid tapeâ on compression/washer seals.
- Test: pressurize âat âsupply⢠pressure, inspect for leaksand⤠conduct local-code pressure testâ if required.
| Item | Description |
|---|---|
| Common thread types | Compression/straight female (dishwasher inlet), 3/8″ compression,⤠1/2″ IPS/NPT onâ valves; use adapters when sizes differ. |
| Tightening guidance | Hand-tightenâ then âwrench an additional 1/4-1/2 turn;⢠follow valve/applianceâ torque spec if provided. |
| Length fitment | 6′ â˘length provides routing flexibility; avoid tight bends, kinksand contact with sharp edges or heat. |
| pressure testing | visually inspect âatâ normal supply pressure and, if required, at local-code â˘test pressure; correct leaks by⢠reseating or replacing seals. |
Q&A
What âŁis the WX28X326 GE 6′ Metal Braided dishwasher âŁConnection Kit?
the WX28X326 is a 6-foot stainless-steel braided flexible water supply hose sold by GE for connecting a dishwasher to the household water supply. It provides a⤠durable, kinkâresistant⢠connection that âreplaces rigidâ copper or PVC tubing and is intended for potable hot and cold water service to a dishwasher.
Will this hose fit my dishwasher⢠and shutâoff valve?
Itâ fits most modern dishwashers and â¤supply valves, butâ you should confirm the thread/type and â˘size of⤠both the dishwasher inlet and the shutâoff valve before buying. many dishwashers and household angle stop⣠valves âuse 3/8âinch compression fittings, which is commonly what this kit is designed for. If â˘your valve or inlet uses a different connection (1/2″ sweat, 1/2″ NPT, etc.), you may need⢠an adapter.
How do I install the 6′ braided connection kit?
Turn off the water at the building shutâoff,â relieve pressure by running the dishwasher or opening the valve, disconnect the old lineand âattach the braided hose to the dishwasher inlet andâ to the shutâoff valve. Handâthread the fittings squarely, âŁthen tighten âwith a wrench about 1/4 â˘to 1/2 turn beyond handâ tight-avoid overâtightening.Make sure the hose is not twisted or kinked and âthat it has enough slack to allow dishwasher movement. âTurn the waterâ back on and⢠check carefully for leaks.
Do I needâ plumber’s tape⤠or sealant on the fittings?
No-do not use âTeflon (thread seal) âtape or pipe dope on compression fittings used with⤠this type of braided hose. Compression fittings seal with the ferrule/olive and the nut.â Adding tape can prevent a proper seal and cause⤠leaks.⣠If an⣠adapter or pipe threadâ is used, follow the adapter manufacturer’s instructions regardingâ sealant.
Is the braided hose rated forâ hot water and safe for potable water?
Yes. The stainlessâsteel braided design isâ intended for potable â˘water and household hot âwater service typical for dishwashers. It isâ indeed suitable for normal domestic hot water temperatures. if you require aâ specific maximum temperature or pressure rating â˘for an unusual⤠installation, check the product â˘documentation âor consult GE for the exact rated limits.
How often should I replace the metal braided dishwasher hose?
Inspect the hose periodically for fraying, corrosion, bulgingor leaks. âMany technicians recommend replacing flexible braided supply lines every â5-10 â¤years or soonerâ if youâ see wear. Replace immediately if you find any damage or if theâ hose shows metal fatigue at the ends âor fittings.
What are common installation mistakes to avoid?
Common â˘mistakes include overâtightening âfittings (which can damage threads or crush ferrules),⢠using thread sealant on compression fittings,â allowing the hose to be kinked or pinched, installing with âexcessive tension,⢠and failing to check for âleaks after pressurizing. Also confirm correct fitting â˘sizes and use proper adapters when â˘needed.
Can I use the 6′ length when pulling the dishwasher out for service or replacement?
yes-6⢠feet⢠gives additional slack comparedâ with short supply⢠lines and makes⣠it easier to slide the dishwasher out for service. âStill, avoid⤠sharp⤠bends or kinks while moving the appliance âŁand recheck fittings âfor tightness and leaks â˘after repositioning the dishwasher.
In Summary
The WX28X326 GE 6′ Metal Braided Dishwasher Connection Kit serves as the critical interface between a dishwasher and the household water⢠supply,â providing a durable, flexibleand secure water line that helps maintain proper âŁwater delivery and minimize âthe risk of âŁleaks. its metal-braided construction offers enhanced resistance to kinking, abrasionand pressure variations compared with âsome⣠option materials, supporting reliable operation âof the appliance and âreducing the likelihood⤠of waterâ damage to surrounding cabinetry and floors.
Accurate diagnosis of connection-line issues and timely replacement âwhen necessary are essential âŁto appliance reliability andâ home safety. Routine inspection for signs â¤of wear, corrosion, fraying, leaksor compromised fittings-combined with attention to appliance performance-enables early⤠detection â˘of⣠problems. When a connection kit is identified as faulty or â˘no longer âsuitable⣠for the installation, replacing it promptly with a compatible, properly rated kit helps avoid more âextensive repairs and potential water loss.
the WX28X326 connection kit plays an âimportant role in dishwasher performanceâ and⣠household protection. Ensuring compatibility, following manufacturer guidance,â and relying onâ qualified personnel⣠for⢠diagnosis and replacement when⣠issues are detected will â˘help maintain safe, uninterrupted operation â˘and reduce the risk of preventable damage.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
