240351240 Frigidaire Refrigerator⤠Crisper Pan is a factory replacement crisper drawer pan designed for use in compatible Frigidaire refrigeration units; â¤it functions as the structural base of âthe⢠crisper/deliâ drawer assembly and as a receptacle⣠for stored produce and condensate. As a service part, the⤠crisper pan is typically a molded component that secures too internal supports or slide rails and interfaces with â¤the âŁdrawer front and humidity-control features to maintain the intended storage surroundings.
Inside the appliance, the crisper â¤pan interacts with the⢠cabinet air-flow and humidity-management systems, the drawer glide or rail hardwareand the internal sealing⤠surfaces that separate âŁthe crisper compartment from the main refrigeration cavity.â It provides mechanical support for stored items,â prevents liquid and debris from migrating to lower compartments⢠or the refrigerator sumpand can affect local thermal mass and humidity â¤retention around fresh foods.Defects in the pan-such as cracks, warpage, âor improperly positioned seals-can thus alter drawer movement, allow cross-contamination of leaksor change âthe microclimate intended for âperishableâ items.
Inâ this article â˘you will find a technical overview of the 240351240 crisper pan’s function andâ design features, âguidance on identifying compatible models and mounting interfaces, common failure⤠symptomsâ to watch for (cracks, drainage issues, binding drawersand altered humidity⢠performance), stepâbyâstep troubleshooting âchecks to isolate pan-related problemsand practical âconsiderations for replacement including verificationâ of âpart number, OEM versus aftermarket options, basic installation stepsand recommended inspection points âduring â¤service. the data is presented toâ help technicians, engineersand â˘appliance owners assess whether the pan is⢠the source of an issue and to perform âa proper, documented replacement when required.
Table of Contents
- function and âRole of the Crisper Pan⢠in Temperature âRegulation, Humidity Controland Load Support
- How the 240351240 Frigidaire Refrigerator Crisper Pan Integratesâ with Internal Airflow, Sealsand Sensor Systems
- Common Failure Symptoms âŁand Diagnostic Indicators: Leaks, Cracks, Odorsand Uneven⣠Cooling
- Compatibility, Replacement Considerationsand Step-by-Step Installation for⢠the 240351240 Frigidaire refrigerator⣠Crisper Pan
- Q&A
- in Retrospect
Function and Role of the Crisper Pan in⣠Temperature Regulation, Humidity Controland Load Support
The 240351240 Frigidaire Refrigerator Crisper Pan is the molded tray âŁthat sits under the crisper drawer âand serves as the primary support surface and condensate collection area.In technical âterms, the âpan defines the local air volume beneath the drawer âand provides a partial physical barrier that reduces⤠convective airflow from the⤠main fresh-food cavity into the crisper compartment; this localized âreductionâ in airâ exchange helps maintain slightly different temperature and humidity conditions compared with the rest of the ârefrigerator. The pan’s geometry-raised edges, drainage channels, âŁand mating tabs-also directs meltwater and spills⢠toward the refrigerator’s evaporator drain, which prevents pooled liquid from re-evaporating into the crisper space and altering the intended microclimate.
Functionally and âfor serviceability,the pan’s material âstiffness and⢠dimensional accuracy determine load support and sealing performance: a warped or cracked pan will allow increased air leakage,change⢠airflow patterns,and can produce frost or elevated humidity in the âŁcrisper.â For technicians and owners assessing⣠compatibility and behavior, checkâ for intact mounting tabs, âclean drainage pathsand a flat seating surface; these elements ensure the pan properly aligns with drawer rails and the cabinet opening, maintaining expected thermal isolation and moisture management. Practical indicators of pan issues include visible⤠deformation under load,persistent âpooling âof liquid,or humidity sensor readings that differ from adjacent compartments-addressing these typically involves replacing⣠the⤠pan with âthe correct OEM number and confirming the crisper drawerâ and seals are undamaged.
- Material and stiffness: affects load capacity and flatness under weight
- Drainage features: âchannels or ports that route condensate to the drain pan
- Mounting âŁtabs and fitment: ensure correct alignment and â˘minimize air leaks
- Failure symptoms: cracks,warping,persistent pooling,or âaltered humidity
| item | Description |
|---|---|
| Part number | 240351240 – replacement crisper pan âŁfor select Frigidaire models |
| Material | Molded thermoplastic (commonly ABS or polypropylene); rigidity influences load support |
| Primary function | Support crisper drawer,collect condensate,and shape local â˘airflow to aid humidity control |
| Common service checks | Inspect mountingâ tabs,flatness,drain channel clearance,and âsigns âof cracks or deformation |
How the 240351240⢠Frigidaire Refrigerator Crisper Pan Integrates with Internal Airflow,Seals,and Sensor Systems
The 240351240 Frigidaire âRefrigerator Crisper Pan â˘functions as more than a simple⤠storage tray; it is an â˘engineered component that completes the â¤lower-cavity airflow path âand forms a⢠physical interface with the cabinet seals and venting channels. Its molded lip and mountingâ datumâ points establish the clearance âthe evaporator fan uses to circulate cold air across the crisper compartment, while the pan’s edges compress against the refrigerator’s gasket and support structures to maintain intended airflow patterns⢠and humidity stratification.When the pan is properly seated the resulting flow reduces⣠thermal gradients near fresh produce â˘and prevents localized â¤warm pockets that can confuse the temperature control logic; conversely, a warped or incorrect panâ will change resistanceâ to flow, alterâ return-air pathsand can cause the control system to âŁrun⤠longer or initiate additional defrost events due to sensor feedback anomalies.
The pan also affects how internal sensorsâ interpret the compartment environment: temperature sensors and humidity probes are calibrated to the⣠designed geometry and expected flow; displacement of the pan or blocked vent passages can create offset readings⤠thatâ lead to inappropriate âcompressor cycles â˘or dampness. For practical troubleshooting and compatibility checks technicians should verify pan fit, inspect the ⣠seal interface for gaps or compression setand confirm that molded vent channels are not obstructed âby debris or aftermarket liners. Common functional characteristics to verify include:
- Proper seating and alignment with âcabinet datum points
- Integrity of vent âpassages and drip channels
- Material rigidity to⣠resist warping under load
- Clearance to nearby temperature or humidity sensors
| item | Description |
|---|---|
| Material | Rigid thermoplastic designed for thermal stability and moisture resistance |
| Primary function | Complete airflow path,collect condensate,and isolate humidity for fresh-food storage |
| Sensor proximity | Mounted to maintain designed distance from temperature/humidity sensors to avoid thermal bias |
| Installation note | Requires correct part number to preserve designed clearances and gasket compression |
Common Failure symptoms and Diagnostic Indicators: Leaks,Cracks,Odors,and Uneven Cooling
The 240351240 Frigidaire Refrigerator âŁCrisper Pan isâ a molded collection tray positioned beneath the crisper drawers that collects condensation,vegetable juices,and defrost runoff. Designed âto â˘interface with â˘drawer slides and chassis mounting tabs, the pan’s geometry and material stiffness determineâ sealing and drainage performance;⣠common materials such âŁas â¤ABS or polystyrene will become brittle âŁor warp over years of âthermal cycling and cleaning solvents, âcausing fitment⤠gaps. When the pan fits correctly it prevents liquids from reaching the cabinet floor,limits the surface area available for â¤bacterial âgrowth,and avoids obstructing return air paths that influence compartment temperatures.
Failure symptoms fall into a⣠small set of diagnosable indicators that distinguish between âpan failure â¤and⣠upstream system faults (for example, a clogged defrost drain). visible cracks, deformation at tab locations, âpersistent localized odors after cleaningand liquid pooling beneath the crisper are⤠direct indicators of pan compromise, while uneven cooling below the drawer often â˘points to pan âmisalignment or â˘obstruction of airflow rather than refrigerant loss. Practical diagnostic actions include âremoving the pan to⤠visually and âŁtactilely inspect mounting tabs and seams,⣠performing a simple water test to locate seepage pathsand confirming âthat odors âare not coming from trapped organic material in textured surfaces before replacing the part.
- Liquid pooling or drips beneath the crisper – suggests cracks, seam failureor misalignment.
- Visible hairline fractures or warped mounting tabs – indicates material fatigue or impact damage.
- Persistent odorâ after cleaning – implies porous contamination or inaccessible biofilm requiring replacement.
- Uneven cooling below drawer – âmay result â˘from airflow⢠blockage by a deformed pan or misplaced drawer.
- Loose or rattling fit – wearâ at retention points that compromises the seal and drainage âpath.
| Item | Description |
|---|---|
| Leak test | Pour a small volume of water into the âpan and inspect underside and cabinet for seepage to âlocate cracks or seam failures. |
| Odor source | Smell and inspect textured areas and seams; persistent âodor after alkaline cleaning suggests micro-porosity or biofilm. |
| Compatibility check | Verify tab locations and drawer slide interface against model specifications; incorrect geometry causes leaks and airflowâ disruption. |
Compatibility, Replacement Considerationsand Step-by-Step â˘Installation for the 240351240â Frigidaire Refrigerator Crisper pan
The 240351240 Frigidaire Refrigerator Crisper Pan functions as the removable âfloor of aâ crisper drawer and⢠provides a flat, washable surface that controls airflow and âŁisolates produce from direct contact with the drawer base. In mechanically compatible installations the pan locates on molded â¤support ârails or ledges inside the â˘crisper cavity and may include aâ shallow channel or drain alignment⤠to direct condensate to the refrigerator drain. Compatibility depends primarily on the pan’s âoverall plan dimensions, edge profile (lip height and notch locations)and the placement of any locating tabs; identical-looking pans can differ by a few âŁmillimeters and fail to seat âŁcorrectly if those features do not matchâ the ârefrigerator’s support geometry. âŁTechnicians⤠should verify the refrigerator model number and measure internal rail spacing and the distance from the rearâ wall to the front rail before assuming interchangeability.
Replacement and installation are straightforward but require attention to alignment and seal behavior:⣠remove stored items, slide out the crisper drawer assembly as specified by the service manual,â lift theâ old pan free of its supportsand inspectâ the railsâ and drain â˘channel for debris or distortion. When installing the new pan, ensure the pan’s front lip engages â˘the drawer face and that any drain notch or â¤recess aligns with âthe â˘refrigerator’s drain channelâ to avoidâ pooling;â test by returning the empty drawer⤠and operating the refrigerator for a short interval while observing for proper seating and water clearance. Ifâ the drawer does not slide smoothly after installation, check for misplaced ribs or a warped pan surface rather than forcing the assembly.
- Empty and remove the crisper drawer; note orientation and⣠any support clips before disassembly.
- Lift out the old pan and clean the rails and drain area; remove obstructions or hardened residue.
- Compare the new pan’s lip, tab locationsand notches⤠to the old pan; confirm fitment visually.
- Place the new pan onto the lower rails,⤠align any drain notch with the âŁdrain channel,â then reinsert the drawer.
- slide the drawer fully closed and open a few times to verify smoothâ motion and correct seating.
- If gaps or misalignment appear, remove the⤠drawer and recheck mounting ledgesor measure for an choice part number.
| Item | Description |
|---|---|
| Mounting type | Sits on internal rails or ledges;⤠tabs/notches must match support geometry |
| critical dimensions | Overall width, depthand â˘lip height – measure internal cavity before replacement |
| Drain alignment | Shallow channel or notch must align with refrigerator drain to prevent pooling |
| Verification step | Confirm refrigeratorâ model/serialâ and compare original part diagram before purchase |
Q&A
What is the 240351240â Frigidaire refrigerator crisper pan?
240351240 is a replacement crisper pan (also called a crisper drawer pan)â used in certain Frigidaire refrigerators. It is the removable tray that sits underâ or forms the bottom of theâ vegetable/produce drawers and collects spills, helps⤠contain moisture,â and supports the crisper drawer âassembly.
How can I tell⢠if 240351240 will fit my refrigerator model?
Check âyour refrigerator model number (usually on a sticker inside the fridge or⤠on the door jamb) âand compare it âto theâ parts compatibility list â˘on Frigidaire’s⣠official parts site â¤or a reputable parts dealer.You can also â¤search for part 240351240â and confirm theâ listed compatible models â˘or measure the existing pan and compare its dimensions and mounting tabs âto the replacement listing before ordering.
How do I remove and install the crisper pan (240351240)?
Remove food from the drawer, slide the crisper âdrawer âout to full extension, liftâ the front of the drawer slightlyâ to âŁclear the stop,â then pull the drawer and panâ straight out. To install,align the pan/drawer on the ârails or guides,slide in until it seats,and âlower if you lifted it. Some models require removal of a glass âshelf or releasing simple clips-consult your â¤fridge user manual for model-specific steps.
Do I need any tools or to disconnect power to replace the crisper pan?
Usually no tools and no power disconnection areâ required. Most crisper pans areâ removable by hand as described above. If your unit has screws or fixed glides securing a shelf âor bracket that must be â¤removed first, a basic screwdriver may be needed. Turning power off isâ not necessary for drawer/pan⢠replacement but follow safety precautions if â˘you’re working near electrical components.
Can I clean the 240351240 crisper pan âin the dishwasher?
Best⤠practice is to hand-wash the pan with warm water and mild detergent and dry thoroughly. Some pans may tolerateâ the top rack of⣠a dishwasher, but high dishwasher heat and harsh detergents can warp or cloud plastic parts. If âŁthe pan is glass, âŁit is often dishwasher-safe-check the material description âfor your specific replacement part.
What are common reasons the crisper pan needs replacement?
Typical reasons include cracks or breaks that cause leaks, broken or worn mounting tabs that prevent â˘the drawer â¤from sliding properly, persistent staining âor odors that cannot⣠be removedand damage from impacts. Replacing a damaged pan restores proper drawer operation and prevents spills into the cabinet.
Is 240351240 anâ OEM partand should I buy OEMâ or aftermarket?
Part⤠number 240351240 â¤is⤠an OEM Frigidaire replacement part designation. OEM parts generally ensure exact fit,â correct mounting tabsand original materials. Aftermarket partsâ can be less expensive and â¤sometimes work fine, but compatibility, fitand material quality vary-verify dimensions and return policies before buying an aftermarket pan.
Where is the best place to buy a genuine 240351240 crisper pan and what should I have ready when ordering?
Buy âŁfrom Frigidaire’s official parts site, authorized Frigidaire dealers,⤠or reputable appliance parts â¤retailers (online or local). âWhen ordering, have your refrigerator model number and⤠the part number (240351240) ready.prices and â¤warranty terms vary by seller, so compare listings and check shippingâ time and return policy.
In Retrospect
The 240351240 Frigidaire refrigeratorâ crisper pan servesâ a practical role in organizing and protecting perishable produce, collecting âmoisture and minor spillsand helping maintain appropriate humidity levels within âtheâ crisper compartment. â¤As a molded component âdesigned to fit âspecific Frigidaire models, it contributes to the âŁappliance’s overall efficiency and helps prevent damage to internal surfaces and stored food â¤when intact and properly seated.
Timely and accurate diagnosis of crisper pan issues-such as cracks,warping,improper fit,or persistent leaks-is important⢠to preserve food quality and prevent secondary damage to the refrigerator. When replacement is necessary, using the correctlyâ specified âpart and following proper installation procedures helps restore the intended function and longevity âŁof the appliance.If there âis anyâ uncertainty â¤about compatibility or installation,â referencing the appliance documentation or â¤consulting a âqualified service â¤professional is advisable to ensure a safe and effective repair.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
