The 316272000 Frigidaire Igniter and Orifice Holder is a combined ignition and gas metering mounting component used on â˘gas⤠cooking appliances.â As⣠a mechanical and electrical subassembly, âit secures the igniter element and the orifice (gas jet) in correct alignment with the burner head, provides the mounting âinterface â¤to the burner boxand routes the electrical âand gasâ connections âŁrequired for â¤ignition.
Inside the appliance the igniter and orifice holder interfaces directly with the burner head, the gas valve/orifice trainand âthe ignition control circuit. â˘The âŁigniter provides the energy âŁsource for flame initiation (either as a hot surface or spark element depending on the design) â¤while the orifice holder âpositions the gas jet to meter fuelâ flow and ensure correct mixing at the burner ports. Proper alignment,sealing,and electrical continuity at âŁthis assembly affect ignition reliability,flame quality,combustion efficiency,and safety interlocks such â˘as flame sensing⣠andâ valve shutoff timing.
In this article readers will find a technical overview âŁof the component’s function and typicalâ construction, guidance on âcompatibility â¤and key specifications âŁto check (electrical ratingsorifice size and â¤fuel type, mounting dimensions), âcommon failure symptoms to recognize (no ignition, âdelayed ignition, unstable or â˘yellow flame, gas odor, visible â˘damage),⤠basic troubleshooting checks to isolate igniter versus gas flow issuesand practical replacement considerations including orientation, gasket and fastener requirementsand safety precautions toâ observe during service. The intent is â˘to equip technicians, engineersand informed appliance owners with the contextual information needed to âassess and âservice âthe assembly while adhering to appliance manufacturer and safety standards.
Table of Contents
- Function âand â˘Role of theâ Igniter andâ Orifice Holder in Frigidaire Gas burner Systems
- How the â˘316272000⤠Frigidaire Igniter and Orifice Holder Operates Within the Appliance Burner Assembly
- Common Failure Symptoms and Diagnostic Indicators for Igniter and Orificeâ Holder faults
- Replacement â¤Considerations,⣠Installation Procedure,â and Safety precautions for the 316272000 Frigidaire Igniter and â˘orificeâ Holder
- Q&A
- wrapping⤠Up
Function and Role of the Igniter and Orifice Holder âin Frigidaire Gasâ Burner Systems
316272000 â˘Frigidaire Igniter and Orificeâ Holder is a combined mounting âand â˘ignition component used in compatible Frigidaire gas burners â¤to both position the âgas orifice and provide a reliable spark source for ignition. â¤The assembly⣠secures the small-diameter brass orifice in âŁthe correct axial and radial location relative to the burner ports whileâ holding the ceramic-insulated â¤electrodeâ at âŁa âcontrolled distance âfrom the burner ground. The electrode is âŁa high-voltage âspark device that produces a consistent discharge across a set gap to ignite the⤠gas; the orifice holder maintains fuel metering âŁgeometry âŁso the spark occurs in âthe correct gas-air mixture. Material and dimensional âŁcompatibility (mounting tabs, thread sizeand electrode lead connection) determine whether this specific replacement will fit a given â¤Frigidaire rangeâ model, so cross-check the OEMâ number and mounting â¤footprint before installation.
In service,a properly installed igniter and⣠orificeâ holder⤠affects ignitionâ reliability and flame stability: a cracked insulator,bent electrode,or â˘mis-seated orifice can⤠cause delayed ignition,intermittent sparks,or weak flames. Technicians should inspect the ceramic insulationâ for hairline fractures, verify continuity of the electrode lead, confirm the spark â¤gapand ensure the orifice remains fully seated and tightened to the specified⤠torque. Simple field checks (visual inspection,continuity test,and âobserving spark location relative to the orifice) quickly distinguish⢠between electrical failure andâ fuel-delivery alignment⣠problems. Whenâ replacingâ the part, match the orifice sizing and orientation to the â˘appliance’s⣠gas type â¤and capacity; improper sizing⣠or incorrect⣠seating can change burn characteristics and gas consumption.
- Typical symptoms indicating replacement: no spark, intermittentâ ignition, visible spark away from âŁorifice, gas odor during attempted lighting.
- Key replacement checks: electrode gap, âceramic integrity, correct orifice size, secure mechanical mounting and âelectrical connection.
| Item | Description |
|---|---|
| Igniter/Electrode | Produces high-voltage spark; mounted with ceramic insulator to maintain gap and electrical isolation. |
| Orifice holder | Positions â¤and secures the metering orifice to ensure consistent fuel flow and correct spark location. |
How the 316272000 Frigidaire Igniter and Orifice Holder⤠Operates Within the Appliance Burner Assembly
The 316272000⣠Frigidaire Igniter and orificeâ holder⢠serves as both the ignition⤠electrode and the mechanical mount⤠for the burner orifice in the appliance burner assembly. The igniter tip is positioned promptly adjacent to⣠the burner⣠port so that the spark creates a flame kernel as gas âissues from the orifice;â the orifice holder secures the calibrated âorifice inâ the correct axial⣠and radial alignment to ensure consistent fuel flow and proper air/fuel mixingâ at the⢠port. In operation âthe electrode createsâ a high-voltage discharge that ionizes the gas/air mixture; proper⢠gap and stable mounting are required soâ the spark reliably jumps âto the⢠flameand the orifice âgeometry controls theâ mass âŁflow â¤rate to match manifold⢠pressure and burner⤠port design.
Performance depends âon correct seating, torqueand⣠electrical â˘continuity: a loosened orifice holder can shift the jet⣠relative to â¤the electrode, producing delayed ignition, âsputteringor a yellow (sooty) flame. Materialsâ and seals on the â316272000 unit must withstand thermal cycling âand combustion byproducts; common service checks include verifying the â¤spark gap, cleaning carbon buildup from the â˘tip, confirming⣠orifice size markings against appliance specificationsand pressure-testing the gas connection for leaks. Technicians typically replace this assembly when ignition is intermittent,when âthe orifice⢠is corroded or blocked,or when alignment cannot be restored without risking â¤gas leakage or poor combustion quality.
- Spark gap: Verify electrode-to-port âclearance and stable spark behavior.
- Orifice size: Confirm correct diameter for manifold pressure andâ fuel type.
- Mountingâ integrity: Check threads, gasket/seal conditionand mounting torque.
- Contamination: Inspect for⢠carbon âbuild-up or corrosion⢠that alters flow or ignition.
| Item | Description |
|---|---|
| Function | Provides ignition spark and secures the calibrated gas orifice for controlled fuel âflow. |
| Common failure modes | Tip⤠erosion,â carbon fouling, loose mountingorificeâ blockage, gasket failure. |
| Service âŁchecks | Spark continuity,visual âalignment,orifice size verification,leak and pressure â˘testing. |
Common Failure Symptoms and Diagnostic Indicators for â¤Igniter and⢠Orifice Holder Faults
The 316272000 frigidaire Igniter⣠and orifice Holder is⢠a combined ignition assembly thatâ positions the gas orifice and âŁprovides the ignition source required to light a burner or oven burner tube. âIn operation the igniter must heat or produce a spark at⤠the correct locationâ relative to the âŁorifice so the â¤atomized gas will ignite reliably; misalignment, a degraded heatingâ elementor a âpartially obstructed orifice will change⤠ignition timing â˘and flame⢠characteristics. This assembly is designed to âmatch the flow and⣠mounting geometry of specific Frigidaire â¤ranges and ovens, so replacement compatibility shouldâ be confirmed againstâ model parts lists and the orifice size specifiedâ for⣠the⢠appliance fuel type.
- No ignition despite glow: igniter draws current and glows but gas does not light – frequently enough caused⣠by restrictedâ orifice, incorrect orifice sizeor weak gas⣠valve pressure.
- No⢠glow / â˘open circuit: igniter or wiring is open – typical symptom of a failed heating element or broken connector; multimeter reads very high resistance or âinfinite.
- Intermittent ignition: ignition âoccurs sporadically – can indicate thermal fatigue in âŁthe igniter,loose electrical connection,or partial clogging in the orifice holder.
- Weak or⢠yellow⣠flame shape: improper air/gas mixing⤠or âpartial blockage of orifice – flame should be steady and blue for proper combustion.
Diagnosing â˘failures requires both electrical and visual checks: measureâ continuity⢠and â˘cold resistance across the igniter and compare to expected âranges from the service manual,test for steady voltage supply during a call for âŁheat,inspect theâ orifice holder for carbon buildup or debris,and observe flame behavior whenâ ignition attempts occur. For example, an igniter that measures as anâ open circuit or shows⣠erratic resistance readings should be replaced, while a correctly functioning igniter that glows but âdoes ânot light â˘gas usually points to anâ orifice â˘restriction orâ insufficient gas pressure; confirming the gas valve operation âŁwith a pressure gauge and verifying orifice cleanliness are⢠practical next⢠steps.
| Item | Description |
|---|---|
| Igniter resistance | Cold resistance should be within the appliance specification; open circuit indicates failed element. |
| Visible ignition â¤behavior | Glow without ignition suggestsâ orifice blockage or low â˘gas flow; intermittent glow suggests wiring or element fatigue. |
| Flame quality | Weak â¤or yellow flames⤠indicate âmixture or orifice issues rather âthan purely electrical âfailure. |
Replacement Considerations, Installation Procedureand Safety Precautions for the 316272000 Frigidaire âŁIgniter and Orificeâ Holder
The 316272000 Frigidaire Igniter and âOrifice Holder combines the spark electrode and the gas orificeâ mounting inâ a single assembly thatâ locates the pilot jet relative to the burner for reliable ignition. The igniter providesâ the high-voltage spark; the orifice holder positions and supportsâ the metered gas jet and âseals to âŁthe burnerâ manifold. Techniciansâ should verify model compatibility, gas type (natural vs âLP)and connector style before replacement – âdifferences⢠in orifice size and manifold fittings determine flame characteristics after installation. Inspect the ceramicâ insulatorâ and electrode tip for cracks or â˘erosion and confirm that the electrical spade terminal and mounting screw patterns match the appliance service⤠manual âto avoid âmisalignment âŁthat can âŁcause delayed ignition or weak flames.
- Confirm part number and gas type compatibility; do ânot reuse â¤an orifice sized for a âdifferent fuel.
- Tools: insulated pliers, smallâ torque âdriver, multimeterand aâ leak detector or soapy water.
- Typical setup⤠checks: electrode gap (~2-3 mm), secure but âlow torque âŁon ceramicâ partsand correct orientation of the orifice to the burner port.
- Post-install tests: restore power and⣠gas, observe ignition timing and âflame color, perform a gas-leak âcheck at fittings.
| Item | Description |
|---|---|
| electrode gap | Target approximately 2-3 mm; large deviations â˘affect ignitionâ reliability. |
| Mounting torque | Hand-tight plus a smallâ fraction of â¤a turn; excessive â˘torque can crack ceramic insulators. |
| Gas type | Ensure the orifice size matches natural or LP âŁgas and anyâ required regulator settings. |
| Electrical connection | Verify spade terminal polarity and insulation; check for continuity to the âigniter transformer before full reassembly. |
shut off gas⤠and electrical power before beginning work and keepâ the appliance isolatedâ until leak and ignition tests are complete. During installation, align the electrode tip relative to the burner port to maintain consistent spark-to-gas proximity and avoid â¤bending the electrode lead; ceramic components are⢠brittle and should be handled with minimal force. After installation, use a combustible-gas detector or soapy-water test at all⢠fittings, confirm a stable blue flame across âoperating rangesand note any delayed⤠ignition or yellow tipping – âthese are indicators to recheck orifice size, alignmentor âmanifold pressure. If conversion to LP is⤠required, âfit the correct orifice and adjustâ or replace the regulator per manufacturer or code requirements; when in doubt,â consult a licensed service technician.
Q&A
What exactlyâ is Frigidaire part 316272000 (igniterâ and⣠orifice holder)?
Part 316272000 is âthe replacement assembly âused on some Frigidaire gas âranges/ovens that contains⤠the â˘oven or â˘surface burner igniter and âthe âŁorifice holder that positions the âgas â˘orifice. â¤the âigniter â˘is â¤the component that either produces a⤠spark or glows to⤠ignite gas; the âŁorifice holder secures the correct gas jet (orifice) and â¤aligns it with the burner. Together they control/generate the flame for a specific burner or oven⤠burner tube.
How do I know if 316272000 is compatible with my Frigidaire appliance?
Check your appliance model number (usually on a tag behind the door,⤠on the frameor on the â¤back of the unit) and search Frigidaire’s â¤parts lookup or a reputable parts distributor for that model. Confirm the OEM part number 316272000â appears in theâ compatibility list. If in doubt, provide⢠the full model and serial to the parts seller or Frigidaire⤠support – do not rely â¤only on â¤physical similarity âŁas orifice size, inlet threadsor wiring/connectorsâ can differ by model or gas type.
What are common symptoms⣠of a failing⢠igniter or orifice holder?
Typical signs include: delayed ignition (puffing⢠or⣠a loud pop), weak or uneven flame, burner that âŁwon’t light at all, igniter â˘that doesn’t glow orâ only glows dimly, continuous clicking (for âŁsparkâ systems), â˘gas smell before ignition, âŁor intermittent operation. An obstructed orifice⢠can âcause low/fluctuating flames or a flame only on one side of the âburner.
How can a technician test the igniter and âorifice âholder to⣠diagnose the problem?
For the igniter: â˘visually inspect for cracks or damage, âtest⣠for electrical â˘continuity with⣠a multimeterand preferably measure âŁcurrent â¤draw⢠when the control calls⢠for heat (hot surface igniters must⣠draw enough current â˘to open the gas safety valve – typically around 2-4 A depending⤠on the design; consult the appliance’s tech âsheet for the⤠exact spec). An element that⤠glows but doesn’t draw sufficient current should be replaced. For the orifice â˘holder: remove it and inspect the orifice for clogging, damageor theâ wrong orifice size âfor your⣠gas type (natural vs. LP). Clean a clogged orifice â˘with compressed air; do not enlarge it. Also inspect seals â˘and mounting for leaks or misalignment.
Can I replace part 316272000 myselfand what safety steps should I follow?
Qualified DIYers can replace âthe assembly, butâ you must follow safety precautions: disconnect electricalâ power to â˘the appliance, shut off the âgas supplyand âwork in a well-ventilated â¤area. After installation, perform a gas-leak check (soapy-water method or a combustible-gas detector) before restoring normal use. If you are not pleasantâ working with gas or âelectrical components, hire a⣠qualified appliance technician. If any gas leak is detected or if â˘ignition behavior isâ unsafe âŁafter replacement, shut off⢠the gas and callâ a professional.
What are the basic installation steps â¤or tips⤠for replacing the igniter and orifice âŁholder?
General steps: 1) âTurn off power and gas. 2) Remove âoven racks/burner caps â¤to⤠access the assembly.3) disconnect âwiring harness from the igniter (note connector orientation). 4) â˘Unscrewâ and⢠remove the old orifice⣠holder/igniter assembly, keeping track of âscrews and gaskets. 5)⤠Install the new orifice and holder so âit seats âproperly âin the burner tube;â replace any gaskets⣠or retainers. 6) Reconnect wiring, reassemble panels/burner parts. 7) Turn on gas and check for leaks, then restore power and test ignition. Do not overtighten fittings – snug is usually sufficient⤠– and follow the appliance’s service manual forâ torque or alignmentâ specs if supplied.
Does the orifice holder determine whether I need a natural gas or LP âorifice?
Theâ orifice⢠holder itself⢠positions the orifice but does not convert gas type; the correct orifice (orifice jet) size for natural gas â¤vs. LP must be installedâ inâ the holder. Converting between natural gas and LP requires the correct orifice sizeâ and frequently enough adjustments âto⢠pressure regulators or conversion⣠kits specified by the manufacturer. âAlways use the manufacturer-specified orifice for your gas type and follow conversion instructions in the service manual.
How can I maintain the igniter and orifice holder to extend service life?
Keep burners and⣠burners’ ports clean and free of food⣠debris⤠and grease. Periodically remove the â¤holder and blow out the orifice â˘with compressed air â¤(do not poke or âenlarge the hole).Avoid âharsh contact with the igniter âelement – the ceramic/glass/glowing element is fragile. Inspect⢠mounting gaskets and connectors âfor corrosionâ or wear and replace as needed.â Regularly check for proper⢠ignition behavior and address issues promptlyâ toâ prevent damage to â¤the safety valve or manifold.
wrapping Up
The 316272000 Frigidaire Igniterâ and orifice Holder is a critical component in gas-powered Frigidaire appliances, coordinating âignition and precise fuel delivery to⤠ensure reliable, efficient combustion.Proper function of the igniter âŁpromotes consistent flame initiation, while the orifice holder âŁmaintains correct⤠gas flow and alignment;â together they contribute to appliance performance, safetyand energy efficiency. Using the correct OEM part âhelps preserve factory-calibrated⢠operation and reduces the risk of uneven heating or premature component wear.
Accurate diagnosis and timely replacement of â¤the 316272000 Igniter and Orifice Holder are essential when symptoms of malfunction-such as delayed or failed ignition, irregular flame behavioror repeated⢠safety lockouts-are present. As of the safety implications ofâ gas and ignitionâ systems, evaluation by a âqualified technician and adherence toâ manufacturerâ specifications are recommended. âŁWhen replacement is necessary, selecting the â¤appropriate part and following proper â˘installation procedures â¤restores safe, efficient operation and helps prevent further damage or service issues.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
