Theâ 1129313 Whirlpool â˘Refrigerator Ice Maker Kitâ Round Plug is a small replacement component supplied as partâ of certain Whirlpoolâ ice maker kits; it functions as â¤a round â¤electrical/mechanical interface and sealing element used⣠where the ice maker âassembly â¤connects to the refrigerator harness or â¤enclosure.â as a discrete OEM part, the round plug is a passive connector/cover that â˘maintains alignment, secures wiring or tubingand helps protect the ice maker interface from mechanical stress and environmental exposure â¤insideâ the freezer compartment.
Inside the â¤appliance, the component sits at the junction between the ice maker âmodule and the refrigerator’s control âand water systems, interactingâ indirectly wiht the ice maker’s harvestâ thermostat, fill solenoid (water valve)and the main control boardâ through⤠the wiring harness.⤠by providing a â˘secureâ mechanical and environmental interface â˘it reduces the likelihood of loose connections, moistureâ intrusion,â and chafing that can⣠cause âintermittent electrical faults or⣠water leaks; its correct installation affects signal continuity, strain âŁreliefand the long-term â¤integrity of the ice â˘maker assembly.
in â˘this articleâ readers will find a technical description of the âround âplug’s âfunction âand design characteristics, guidance âon compatibility and model matching, common failure âsymptoms to watch for (for example loss of ice⣠production,⣠intermittent operation,⤠visible corrosionor moisture atâ the âconnection), systematic troubleshooting steps to isolate plug-related âfaultsandâ practical replacement considerations such âas verifying part â˘numbers, connector orientation,⢠securing⢠clipsand basic âsafety precautions (power and water isolation). The coverage âŁis â¤intended to equip technicians, engineersand appliance⢠owners with the information needed to assess whether the plug is implicated in an ice âmaker issue and to plan an appropriate repair orâ replacement.
Table of Contents
- Function and Role of the Ice Maker Round Plug âŁin refrigerator Electrical and Water Control Systems
- Howâ the â1129313 Whirlpool Refrigerator Ice Maker Kit âRound Plug Integrates â¤with Ice-Maker âControl Circuits and Water Valve Operations
- Commonâ Failure Symptoms and Diagnostic Tests for⣠round Plug⤠Connection, Continuity and Signal Faults
- Compatibility, Supported Appliance â˘Models, Replacement âParts and Installation Considerations forâ Service Technicians
- Q&A
- In Summary
Function and Role âof the Ice Maker Round Plug in Refrigerator âElectrical andâ Water Control Systems
The 1129313 whirlpool Refrigerator Ice Maker Kit Round Plug functions as⢠the⤠electrical and â¤low-voltage âcontrol interface between the refrigerator wiring harness and the ice maker assembly (including the fill valve and⤠the ice-making module). This round, keyed connector routes multiple conductors-powerâ feed, switched outputs to the â˘waterâ solenoid, harvest/heater circuitsand sensor or âthermostat returns-through a single sealed junction to simplify installationâ and service. The connector’s mechanical keying and polarised pin arrangement determine compatibility across models; technicians should verify terminal count and keying against â˘the appliance â¤wiring diagram before installing a replacement to avoid mismatched âsignals⤠or â˘improper voltages at the ice maker âmodule.
- No ice production or no âfill despite power present (possible open pin or corrosion).
- Continuous fill or stuck âvalve (shorted or stuck control contact at the â¤plug).
- Intermittent operation correlated with vibration or door cycles (loose âmating orâ damaged âŁlatch).
- Visible â¤corrosion, bent pinsor melted â¤housing⣠indicating failed seal or overload.
In practical service,the âround plug is frequently enough the simplest single-point failure that âproduces multiple failure modes; troubleshooting typically begins⤠with a visual â¤inspection,continuity âŁchecks across expected pins,and live-voltage verification against the schematic for âthe specific model. As diffrent âWhirlpool systems may use different nominal voltages orâ assign pin âfunctions differently, test â¤procedures should include measuring âŁvoltage at â˘the â¤plug during a fill or âharvest cycle and confirming â¤that the plug’s âŁlatch secures fully to prevent intermittent contacts. Replacing the plug or harness âis a straightforward repair when pin mapping matches; retain correct wire routing and secure strain â¤relief to prevent âfuture failures fromâ vibration orâ iceâ maker âmovement.
| Item | Description |
|---|---|
| Powerâ input | Main⣠supply to the⣠ice maker control module (source of module logic and motor power) |
| Fill âvalve control | Switched conductor that energises theâ water solenoid during the fill cycle |
| Thermostat/sensor return | Signal from theâ sensing thermostat or⣠thermistor used toâ detect ice level or â¤temperature |
| Harvest/heater control | Output used to drive the heater orâ motor function for â˘ice release |
| Ground/neutral | Returnâ or protective earth dependingâ on circuit design |
How the 1129313 Whirlpool Refrigerator Ice âMaker âŁKit Round â¤Plug Integrates with Ice-Maker Control Circuits and Water Valve Operations
1129313 Whirlpool Refrigerator⣠Ice maker Kit Round plug is the electrical interface that links the ice-maker â˘control module to the refrigerator wiring harness and the water inlet solenoid. The round multi-pin connector routes the⢠control board’s low-voltage and switched outputs-typically âŁpower, ground, motor/harvest control, â˘bin-full or⣠shutoff switchand a fill-valve drive-to the ice-maker assembly; pins are keyed and latched to â¤ensure correct orientation and minimize contact loss. In practice this means the â¤plug must present clean, correctly seated contacts for the control board to detect ice â¤level, initiate a harvest cycleand â˘energize the âŁwater valve at the proper point in the ice-making sequenceand replacements are â¤used when pins are corroded, meltedor mechanically damaged.
The plug’s role in water-valve operations is to carry âthe timed driveâ signal from the ice-maker control â¤to the valve coil: the ice-maker closes âthe cam/logic loopâ and applies the driveâ (either a switched supply or a switched ground â˘depending on model) for the prescribed fill interval. Common failure modes that affect fill behavior include high contact resistance at theâ plug, bent or pushed-out pinsand cracked âinsulation that allows intermittent shorts; these⢠produce symptoms such as no-fill, âoverfillor short, rapid cycling of the valve. Typical technician âchecks include visually inspecting pin condition, measuring âŁcontinuity and⢠coil resistance at the connectorandâ observing the âdrive voltage â˘at âthe plug during a fill⢠cycle to distinguish valve faults from connector or control-board faults.
- Pin functions: motor/harvest, â¤fill-valve drive, bin switch, power and ground.
- Common symptoms: no fill,intermittent fill,or valve energized continuously due to bad contacts.
- Practical⤠tests: continuity/coil resistance,⣠voltage measurement during filland substitution of a known-good plug or valve.
| Item | Description |
|---|---|
| Connector type | Round multi-pin,â keyed/latching âhousing designed for â˘factory⢠harnesses |
| Primary functions | Routes control signals for motor/harvest, âfill⤠valve, bin/full sensorand power/ground |
| Compatibility | Used on select Whirlpool/KitchenAid â¤models; verify model and harness match before replacement |
Common Failure â˘Symptoms and Diagnostic Tests forâ Round Plug Connection, Continuity and Signal Faults
The round plug in⢠the 1129313 Whirlpool Refrigerator Ice Maker Kit Round âPlug is the electrical interface that carries power, ground andâ the control signals between the ice maker assembly and the⤠refrigerator’s control circuitry. This circular âconnector is designed âŁfor a compact harness â˘routing and can fail âthrough â˘contact â¤corrosion,bent or recessed pins,orâ broken wires at the plug body. âBecause pin assignments and signal⢠levels vary between Whirlpool⣠models, technicians should âverify the specific âŁharnessâ pinoutâ for⢠the refrigerator under test before interpreting âmeasurements; mechanically secure mating and clean contacts are as critical to function as⢠the electrical integrity âof each circuit.
Common symptoms of plug-relatedâ faults include intermittent operation, no-fill or no-harvest cycles, constant run of the iceâ motor or⣠heater, âand complete loss of ice-makerâ responsiveness. Diagnostic âsteps concentrate onâ aâ visual⤠and mechanical inspection followed by âelectrical checks with a multimeter: confirm continuityâ across mating terminals and check for⤠presence â¤of control voltages during the expected cycle âactions. Use a back-probing techniqueâ or â˘temporaryâ jumper where safe to isolate the plug from downstream components; an open continuity reading where the harness is intact indicates internal plug or wire breakage,⢠while â¤correct continuity with missing âcontrol voltage â¤points to upstream control module âŁor timed-signal faults.
- Symptoms: no ice, intermittent cycles, heater or motor not switching -â inspectâ plug for corrosion, push-fit stability, âand⣠bent pins.
- Continuity test: back-probe corresponding pins to check for open circuits or high-resistance â¤connections in the harness âŁand plug.
- Signal/voltage⢠test: measure⢠expected control⣠voltages during a âcommanded fill or harvest cycle; absence indicates upstream control or connector âfault.
- Functional isolation: temporarilyâ disconnect plug to determine âif problem follows the ice maker or remains with the ârefrigerator â˘wiring/control board.
| Item | description |
|---|---|
| Continuity check | Verify conductor continuity between plug pins and component terminals; open = broken wire/connector contact. |
| Signal/Voltage check | Measure control voltages during âactive cyclesâ per service manual â˘to confirm switching from the â¤control board. |
| Visual inspection | Look for corrosion, â˘pin deformationor insulation damage at the plug that âŁcan cause intermittent â¤orâ high-resistance faults. |
Compatibility, Supportedâ Appliance models, replacement Parts âand Installation Considerations for Service Technicians
The 1129313 Whirlpool Refrigerator Ice Maker â˘Kit Round Plug is the âround-style electrical connector assembly âused onâ select Whirlpool ice-maker modules; it provides â˘the mating interface â˘for power and control circuits that drive the motor, heater⤠and water-fill solenoid. Technicians should⤠verify âŁcompatibility by comparingâ the plug geometry, pin count and wiring colorâ coding âto the refrigerator’s wiring diagram and parts list-physical â¤fit, harnessâ length and mounting orientation determine interchangeability more â˘reliably thanâ model family â˘names alone. In manny North American⣠refrigerators the⢠ice maker harness carries mains-derived control power and switched loads, so confirm whether⣠the target appliance uses line-level âor âlow-voltage control⤠signalsâ before substituting âparts.
During⢠replacement, follow safe service practices:⣠isolate the applianceâ from supply power, document harnessâ routing and connector orientation,â and inspect connector pins for corrosion or deformation that âŁwould âŁrequire replacing the âmating harness âor âusing an OEM pigtail. Use a multimeter to verify continuity and that the ice maker receives âŁthe expected control⢠voltage per the service schematic; secure the⣠harnessâ with proper strain relief and fastenersâ to prevent chafing. Common⢠replacement items to keepâ on hand for field service âŁinclude theâ mating harness/connector,⣠replacement mounting screws/brackets,⤠water inlet valve⢠and the ice maker module itself when actuator âor thermostat faults are present.
- Compatibilityâ checks: match plug shape, pin count, wiring colors and harness â¤length âto the appliance schematic.
- installation steps:⣠disconnect power,document routing,replace connector/harness,secure strain relief,test cycle and voltage.
- Failure indicators:â intermittent contact,⢠corroded pins, melted insulation or â˘incorrect actuation signal at the connector.
| Item | Description |
|---|---|
| Plug⢠type | Round-style mating connector – verify âpin count and⤠keying visually against the refrigerator harness. |
| Replacement⣠parts | Mating harness/connector, âmounting hardware,⤠water inlet â¤valve, ice maker module; use OEM parts where possible. |
| Installation checks | Wiring colors and continuity,⢠secure strain relief, correct⤠orientation,⢠and a functional actuation/voltage test per⣠schematic. |
Q&A
what exactly is the 1129313⢠Whirlpool Refrigerator Ice âMaker Kit (round plug)?
The 1129313 kit is a replacement ice maker assembly sold for certain Whirlpool-family refrigerators â˘that use a⢠round multi-pin plug⤠connection. âIt typically includes the ice maker module â(motor/gearbox and mold), the mounting bracket/hardware and the factory wiring harness terminated with a round plugâ that mates to the fridge’s harness. It is intended⣠to replaceâ a failed ice maker assembly, not the entire refrigerator orâ the âwater valve.
How â˘do I know if 1129313 is compatible with â˘my refrigerator?
Check the refrigerator model number (usually on a sticker inside âtheâ fridge or on the door frame) and compare it against the parts compatibility list from Whirlpool âor an authorizedâ parts distributor. The â˘key compatibility requirement is âthat your fridge uses the same round plug style âŁand has the⣠sameâ mounting pattern and electrical footprint.â If in doubt, supply â˘the appliance model number toâ the parts dealer or Whirlpoolâ support to verify⣠fit.
What⤠are the basic âsteps â˘to install the 1129313 ice maker kit?
Basic installation steps: 1) Unplug the refrigerator and shut â¤off the water supply. 2) Remove any shelves/ice bin to access the old ice maker. 3) Remove mounting screws and⣠disconnect the round plug from the old unit (note orientation). 4) Transfer any required mounting brackets or trimâ and fit âthe new ice maker into place; secure â¤with screws. 5) Plug the new unit into the matchingâ round receptacle, restore the waterand restore power.⣠6) âCheck for leaks âŁand run a⣠test cycle per the manufacturer’s âinstructions. Always âfollow the⤠kit’s âŁprinted⣠instructions and use appropriate hand tools (screwdriver, nut driver, towel for âdrips).
Do I need to shut off power and â˘water⢠before replacing the unit?
Yes. Always disconnect â˘electrical power to the⣠refrigerator to â¤avoid shock or damaging âŁthe control â¤electronics. Also shut⢠off the water supply line before disconnecting any water-filled âlines to prevent flooding. After âŁinstallation, restore the water âsupply slowly andâ check for⢠leaks before restoring power⢠or⤠makingâ electrical connections.
Howâ do I test the ice maker after installation and⣠how long until âŁit makes ice?
After installation â˘and restoring power and water, âput â¤the freezer to the recommended temperature (around 0°F / -18°C).Manyâ ice makers require up âŁto 24 hours to beginâ producingâ a full tray; however you can initiate a â¤manual or â¤diagnostic harvest/test cycle to confirm operation promptly (methods vary: some units have a test pushbutton, others require advancing a test⤠gear or using the refrigerator’s service diagnostics). Consult the ice â˘maker or service manual for the âexact test procedure. also verify the ice maker⣠fills with âwater âŁduring the fill portion of the cycle and âthat âthe tray â˘harvests when heated.
My new ice â¤maker installed correctly âbut it’s not making ice -â what should I check?
Common âcauses: 1) Water supply is off, kinkedor⣠cloggedâ – verify theâ line and filter.2) Low water â¤pressure – check pressure â¤meets manufacturer minimum â¤(referâ to manual; many⣠require around 20 psi minimum). 3) Freezer temperature â˘too â¤warmâ – set to ~0°F. 4)â Ice maker not receiving â˘power or not in âonâ position – confirm âthe round plug is fully seated and the unit is âswitched on. 5) Faulty water inlet valve or clogged inlet screen. 6) Airlockâ in âthe water line – cycle the dispenser or allowâ more⣠time. If basic â¤checks fail, run the diagnostic cycle to observe â˘fill and harvest stages and ârecord any error⤠codes.
The ice maker is leaking -⤠how do I troubleshoot the leak?
First,identify the source: âleak⢠from the water supply line (at⤠the shutoff valveâ or fitting),fromâ the ice maker fill cup,or from the â˘ice maker housing. Steps: ensure âall fittings are tight and theâ supply line is not cracked⢠or kinked; check the inlet connector to⤠the ice maker for a proper seal;⢠inspect the fill tube and fill cup for cracks or misalignment; verify âthe water âinlet valve is not âŁoverfilling due to â˘a faulty valve or excessive pressure. if⢠the leak is internal â˘to the ice â˘maker assembly, replace â¤the unit. If unsure, turn off water and power and call a qualified appliance technician.
In Summary
The 1129313 â¤Whirlpool Refrigerator Ice Maker Kit Round Plug serves as â¤a⢠specific replacement â¤component designed to restore or maintain the electrical and mechanical interface for compatible Whirlpool ice maker assemblies. As a small but âessential part, it helps⢠ensure âreliable power connection, correct alignmentand proper function of theâ ice maker system, contributing to consistent ice production and preventing intermittent failures that can arise from worn or damaged connectors.
Recognizing â¤the role of this kit underscores â¤the importance of⣠addressing ice maker issues promptly. Whenâ ice production is impaired, symptoms such as no power to the ice maker, intermittent operationor poor fitment can indicate⢠a faulty plug or related components. Using the correct replacement-ideally theâ OEM-designated 1129313 kit-helps âpreserve compatibility, electrical safety, âŁand theâ intended performance characteristics of âthe refrigerator.
Proper diagnosis and careful replacement are key to a triumphant ârepair. Verify the symptom source through visual inspection and basic electrical checks, confirm part compatibility with the â˘refrigerator modeland follow recommended safety precautions (including disconnecting power) âŁduring installation.For uncertain âdiagnoses or complex electrical work, âŁconsult qualified service personnel. Thoughtfulâ assessment and correct replacement will extend the service life of the ice maker and reduce the âlikelihood of ârecurring problems.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
