316272000 frigidaire Igniter and Orifice Holder is a combinedā ignitionā¤ and gas metering component used on Frigidaire gas cooking appliances. The assembly typically comprises an igniter electrode or spark moduleā¢ mounted to a machined āholder that secures the gas orifice (jet) in the burner feed. Physically,it locates at the interface ā¢between the burner tube and the burner head and provides both the electrical ignition āsource and theā precise orifice positioning required for consistent burner performance.
Inside the appliance, the igniter portion supplies theā ignition energy (spark or hot surface contact, depending on design) to āinitiateā¤ combustion while the orifice holder positions the metering nozzle that determines localized gas flow and jet characteristics. āThe assembly interacts ādirectly with the āburner āhead, ā¤theā£ manifold and gas valve that supplies pressure, the appliance wiring ā¤harness and ignition control moduleand, indirectly,ā£ with āsafety devices such as flame sensing elements and pressure regulators. Correct orientation, ā£secureā¤ mountingand āappropriate orifice sizingā areā vital to ensure reliableā ignition timing, stableā burner flamesand proper air-fuel mixing across operating conditions.
In this article you will find a technical review of the 316272000 assembly covering how itā¤ functions, which appliance models and burner types it is compatibleā with, typical ā£failure symptoms to recognize (for example persistent noāignite, delayed ignition, weak āor irregular flame, āor gas odor)and diagnosticā¤ considerations a technician can use to isolate the component āfrom related systems. āthe article also addresses replacement ā£considerations including matching orificeā size and gasā¢ type (natural vs LP), mechanical fitment and sealingand ā¢safety precautions toā¤ observe when servicing gas ignition components and performing leak and functional checks after replacement.
Tableā of Contents
- Function and Role of the Igniter and Orifice Holder in Frigidaire Gas Appliances
- Howā£ the 316272000 ā£Frigidaire Igniter and Orifice Holder Works Inside the Appliance
- Common Failure Symptoms and diagnostic Indicators for Igniter and Orifice Holder Faults
- Replacement Considerations and Step-by-Step āInstallation for the 316272000 Frigidaire Igniter and Orifice Holder
- Q&A
- Toā£ Conclude
Function andā Role of the Igniter and orifice Holder in Frigidaire Gas Appliances
The 316272000 Frigidaire Igniter and Orifice Holder is a combined mechanical and electrical assembly that secures theā gas orifice while providing the mounting and electrical interface āfor the ignition āelement.ā¤ Its primary roleā£ is to maintain āprecise alignment and spacing between the orificeā¤ and theā igniter tip-whether a spark electrode or hot-surface element-so that gas release and initiation of combustion occur reliably. The holder alsoā forms the mechanical and thermal interface to the āburner valve, āproviding a gas-tight seating, electrical insulation,ā¢ and resistance to thermal cycling and combustion by-products; verify model compatibility before installing a replacement to āensure correct fitā£ and sealing surfaces.
When theā holder is cracked, corrodedor ā¢distorted, ā£common operational symptoms include delayed āignition, intermittent lighting,ā¢ or an unstable flame pattern. Technicians assess the component with aā visual inspection for physical damage, continuity checksā on the igniter circuitand a measurement of ignition ācurrent or spark behavior against the appliance specifications. Practical replacement steps include confirming the igniter tip distance to the orifice, ā¢ensuring fasteners provide āa secure, leak-free āsealand verifying wiring connectors and insulators are intact; incorrect alignment or loose mountingā¤ can mimic a failed igniter and produce unsafe combustion characteristics.
- Primary functions: secure orifice, hold igniter position, provide electrical insulation and mechanical support.
- Common failure signs: ignition delay, intermittentā spark/glow, uneven flame, visible corrosion or ceramic cracking.
- Inspection actions: visual damage check, continuity/currentā¢ measurementorificeā obstruction check, gas-seal verification.
| Item | Description |
|---|---|
| Typicalā¢ construction | Heatāresistant ceramic insulator ā¢with metal bracket/fastening hardware to āresist thermal cycling and ācorrosion. |
| Service checks | Visual alignment, igniter continuity/current ādraworifice cleanlinessand verification of a gas-tightā£ mounting. |
How the 316272000 Frigidaire Igniter and Orifice āHolder Works inside the Appliance
The 316272000ā¢ Frigidaire Igniter and Orifice Holder ā¢serves āas the mechanical and electrical interfaceā¢ betweenā the ā£gas valve and the burner head: it secures the metering orifice, ā¤positions the igniter electrode or hot-surface elementand provides a heat- and electrically-resistant ā¤mount that keeps the gas jet aimed into the burner flame zone.Inā practice ā£thisā¤ part holds the orifice at a controlled distance from āthe ā¢valve outlet and alignsā the igniter so ā¢the spark or hot surface contacts theā£ gas āstream immediately āas the valve opens. The ā¤assembly is manufactured from high-temperature metal and ā£ceramicā£ insulators to withstand combustion heat and prevent shorting of the electrode while maintaining āa gas-tight seal at the āvalve outlet; compatibility requiresā¤ matching the assembly’s mounting pattern and orifice sizeā to the appliance valve and ā£burner cap geometry.
- Alignment: positionsā£ the jet and igniter for reliableā¢ ignition and consistent flame pattern.
- Sealing: provides an orifice seat that prevents ā¢leakage at the valve-to-burner interface.
- Electrical isolation: insulates the igniter electrode from the chassisā to ensure proper spark delivery.
- Common failure symptoms: ā¢delayed ignition, continuousā clicking, small or unstable flameor strong gasā¢ odor when the valve opensā¢ without ignition.
| Item | Description |
|---|---|
| Orifice function | Controls gas flow ārate ā¤and jet geometry to match burner BTU; must match valve thread/mounting. |
| Igniter interface | Holds electrode or hot rod at a fixedā£ gap āto the gasā£ jet to ensureā prompt ignition. |
| mounting | Screwed or clipped to theā valve body; correct ā£orientation is required for proper flame distribution. |
During operation ā¢the valveā opens under control ofā£ the appliance controller and gas flows thru the metering orifice into the ā£burner chamber;ā¢ the igniter element thenā provides either high-voltageā¢ pulses (spark ignition) ā£or heat (glow ignition) at the orifice exit so theā¤ combustible mixture lights immediately. Technicians diagnose issues by inspecting theā assembly for crackedā ceramic, corroded or āclogged orifice holes, misaligned electrodesor loss āof electrical continuity; simple correctiveā actions āinclude cleaning carbon deposits around the jet, verifying the electrode gapand confirming āthe assembly matches the appliance’s specified orifice ā£size and mounting pattern. āUsing āa mismatched orifice holder changes jet geometry and can cause lean/rich ā£combustion, soā replacements should match OEM ā¢specifications for valve interface and burner BTU rating.
common failure Symptoms and ā¤Diagnostic Indicators for Igniter and Orifice Holder Faults
The assembly 316272000 Frigidaire Igniter and Orifice Holder serves two coordinated āfunctions: it āsecures the gas orifice āin the correct location relative to the burner andā positionsā¤ the ignition electrode so āa reliable spark or pilot is produced at the combustion zone. Mechanically it ā¤provides mounting, sealingand alignment for the orifice; electricallyā£ it provides theā£ electrode and wiring interface to the appliance’s ā¢ignition ā¤module. Confirm compatibility by matching the OEM part numberā¢ andā¢ connector style ā¤toā£ the appliance model, since differences in ā¢mounting tabs, wireā leadsor orifice size will change ignition ābehavior and gas flow characteristics.
Common failure symptoms include absence of spark, delayed ignition, intermittent ignition with a loud click, sooting or a yellow flame, ā¤and the presence of a gas odor before ignition. Diagnostic indicators for a failing assembly are visible electrode erosion, carbon buildup that obstructs the orifice,ā open electrical continuity through āthe ā£igniter circuitor an irregular flame pattern that āshifts or lifts away from the burner head. Practical diagnostic steps used by technicians include a visual inspection, a ā¤continuity ā¤check with a multimeter, observing spark behavior with āthe burner under normal gas pressureand removing the orifice for cleaning or inspection if āflame shape indicates partial blockage.
- Noā£ spark or continuousā¤ clicking at ignition
- Delayed ignitionā¤ orā¢ repeated flashing before a stable flame
- Yellow or sooty flameor ā¢flame lifting away fromā¤ the burner
- Visible electrode ādamage, carbon ā£depositsor orifice blockage
| Item | Description |
|---|---|
| Continuity check | open circuit ā£indicates ā¢a failed igniter; measurable continuity suggests intact wiring/electrode |
| Spark observation | Weak or absent spark ā£under normal gas āflow indicates electrode or ignition feed issues |
| Visual/orifice inspection | depositsā or deformation atā the orifice alters flow and flameā shape; cleanā or replace as needed |
Replacement Considerationsā and Step-by-Step Installation for the ā316272000 Frigidaire Igniterā¤ and Orifice Holder
The 316272000 Frigidaire Igniter and Orifice Holder is a ācombined ā¤mechanicalā¤ carrier and electrical mounting for the burner orificeā¢ and ignition āelectrode used on compatible Frigidaire gas cooktops and ranges. āMechanically, the orifice holder positions the metering orifice ā¢relative to the ā£burner ports so the āgas jet and air/fuel āmixing are repeatable; electrically, the igniter orā£ electrode is mounted to a ceramic insulator on the same assembly to maintain ā£a stable ā¢sparkā¤ orā hot-surface āposition. Typical failure modes include ceramic cracks that change electrode spacing,ā carbon or grease build-up that alters ignition timing,ā or ā£loose mounting that shifts orificeā£ alignment and causes weak, sootyor uneven flames. Confirm model compatibility and orificeā size (natural gas vs.LP) before replacing the assembly, ā¢because incorrect orifice sizing directly affects flame shape and heat output even if the ā£igniter itself functions correctly.
Follow controlled disassembly and āreassembly procedures to preserve alignment and avoid damage to the ceramic insulator or electrode leads. Before starting, ensure the appliance is isolated from gas and electrical supplies āand verify theā replacement 316272000 Frigidaire Igniter and Orifice Holder matches ātheā¤ original in mounting dimensions and orifice thread.ā During installation keep electrode-to-burner-port spacing consistent with manufacturer ātolerance (typical spark gap ranges are small-verify againstā the service ā¤manual for the specific model), hand-start screws to prevent cross-threadingandā£ apply only light torque to the āceramic body to avoid stress fractures. after installation performā a functional ā£ignition test āand aā gas-leak checkā at ā¤the orifice andā¤ fittings; if flame distributionā¢ is uneven or ignition āis ā¢intermittent, re-check orifice orientation, electrode gapand the integrity of āthe electrical connector.
- Shut off gas supply āand electrical power to the appliance.
- Remove burner ā¤grate,cap,and any trim to exposeā theā¢ orifice holder.
- Disconnect the igniter lead and removeā¢ mounting āscrews; note orientation ā¢for reassembly.
- Replace the ā£orifice ifā£ converting gas type or if damaged; confirm thread and size ābefore tightening.
- Install the 316272000 āassembly, align the orificeā andā¤ electrode,ā hand-tighten screws, then apply lightā torque.
- Reconnect the igniter lead, restore gas and power, perform aā¤ leak check and ignition testand observe flame pattern.
| Item | Description |
|---|---|
| Part number | 316272000 – combined āigniter mounting and orificeā holder |
| Primary ā¢function | Secure ā¢orifice positionā and mount ignition electrode/insulator |
| Typical connector | single-pin insulated igniter lead or spade connector depending on model |
| Orifice considerations | Useā¤ correct orifice size for gas type (NAT vs. LP); incorrect size alters flame and heat output |
| Mounting torque | Light torque only (avoid over-tightening ceramic parts); follow ā¢model-specific spec, āgenerallyā£ low in-lb values |
Q&A
What is āthe Frigidaire part 316272000 (Igniter and Orificeā¢ Holder) and what doesā¤ it do?
The 316272000 assembly is an OEM replacement ācomponent used on certain Frigidaire āgas ranges/ovens. It combinesā¤ the burner/oven igniter ā(the element that produces the ā¤spark or glowing heat āto ālightā¤ the gas) āwith the orifice holder (the bracket thatā¤ positions the gas āorifice/nozzle āand directs āgasā toā¢ the āburner). Together they ensure a controlled gas flow andā reliableā¤ ignition for safeā£ burner operation.
What are theā common signs āthat the 316272000 igniter/orifice āholder is failing?
Typicalā symptoms include: the burner or oven willā not light or takes much longer to light, the ā£igniter glows weakly or not at all, uneven or weak flame, gas odor without ā¤ignitionor frequent clicking without ignition. If the igniter ā¢glows ā¢butā the gas āvalveā never opens, the igniter may be weak and not drawing sufficient current toā£ actuateā¢ the safetyā valve.
Can ā¤I replaceā¤ the ā316272000 myself and what safety steps should I take?
Homeowners with basic mechanicalā¢ skills can replace the part, but youā¤ must turn off the gas supply and disconnect ā¤electrical power before starting.ā£ Work in a well-ventilated area and avoid open flames.Remove āburnerā grates/oven racks and access panels as needed, disconnect electrical connectors, unfasten āmounting ā¢screwsand swap the assembly. āAfter installation, check for gasā leaks at ā¤the āconnection (soap/water test or approved gas leak detector) and restore power. āIf ā£youā are unsure or uncomfortable working with gas connections, have āa qualified serviceā¤ technician perform the replacement.
How do I test the igniter portion of 316272000ā¤ to knowā¤ if it’sā¢ bad?
A basic test is a continuity check with āa multimeter: disconnect power andā the igniter, then measure for continuity. An open circuit indicates a failed element. For a āmore precise assessment, a technician ā¢can measure the current draw with a āclamp ammeter while theā¤ igniter is powered – āmany ā¤oven safetyā¢ valves require a ā¢certain amperage (commonly around 2.5-3.6 A, but check the appliance spec)ā to open; an igniter that glows but draws insufficient current will not open the ā¢valve and should be replaced. Always follow the appliance service manual for ā£test values.
Howā¤ do I clean or ā£maintain the orifice holderā and orifice to prevent problems?
Light maintenance: keep burner areas free of spilled food,greaseā and debris. If the orifice becomes clogged, turn offā¤ gas and power, remove the orifice holder per the service manual,ā¢ andā¢ gently clearā debris with compressed air or a soft ābrush. Do not āenlarge or damage the orifice opening by drilling or poking with wire; damage will alter gas flow andā£ is unsafe. If the orifice is corroded, damagedorā blocked beyond cleaning, replace itā or the entire āorifice holder assembly.
How do I confirmā that 316272000 isā the correct replacement for my Frigidaireā¢ model?
Verifyā compatibilityā by checking your range/oven modelā£ number (usually on a labelā¢ behind the oven door, āon the frameor at the ā£back of the appliance) and cross-referencing it with the parts list or a trusted parts distributor. Youā¤ can also confirm that the existing part number onā your current igniter/orifice holderā matches ā¤316272000. When in ādoubt, provide the āappliance ā¢model number āto ā¢the supplier āor Frigidaire support to ensure you get the correct OEM part.
What typically causes the igniter/orifice holder to failand can failures be prevented?
Commonā causes areā£ normal wear of the igniter element (especially hot surface/glow igniters), corrosion or blockage ā£of ā£theā£ orifice from food/residue, electrical connector corrosionand physical damage from impact āor improper cleaning. ā¤Preventive steps include regular cleaning ā¢of the ācooktop/oven, avoiding spills entering the burner assembly,ā and checking electrical connections during service. Because igniters age and degrade over time, replacement is sometimes necessary even with good maintenance.
How much does the ā316272000 part and replacement typically costand is there a ā¤warranty?
Retail prices for the part alone vary āby sellerā and ā¤region; OEM igniter/orifice ā¤holder assemblies commonly range from modest to moderate cost ācompared with labor. Labor costs depend on local service rates.ā¢ Many authorized parts sellers and Frigidaire-authorized service centers offer limited warranties on new OEM parts (check the seller’s warranty āterms). If the appliance isā under manufacturer warranty, parts and labor may be ā£covered-confirm with Frigidaire or your warranty provider before ā¢paying for ārepairs.
To Conclude
The 316272000 Frigidaire Igniter and Orifice Holder is ā¤a critical ā¢component in gas-fired Frigidaire appliances, combiningā the ignition source and precise gas metering to āensure consistent combustion. Proper function of the igniter delivers the requiredā energy to initiateā¢ flame, while the orifice holder positions ā£the gas orifice to maintain correct flow and steady flameā£ characteristics.Together they contribute directly to appliance efficiency,reliable operation,and safe burner performance.
Timely and accurateā diagnosis ā£of igniter or orifice holder faults is essential: common indicatorsā such āas failure to ignite, delayed ignition, weak or unstable flameor ā¤unusualā¤ odorsā warrant inspection and testing. When faults are confirmed, replacing the component with the correct 316272000 part or an approved equivalent restores design intent and minimizes risk. Adhering toā manufacturer instructions, verifying compatibilityand completing post-replacement function and leak checks-preferablyā by a qualifiedā¢ technician for gas appliances-helps ensure safe, durable results.
understanding theā roleā of the 316272000 Frigidaire Igniter and Orifice Holder and responding promptly to performance issues āsupports appliance safety, efficiencyandā¤ longevity; professional diagnosis andā¤ proper replacement when required remain the āmost reliable steps to maintainā optimal operation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
