240359001 Frigidaire Refrigerator White Door Shelf Bin is a removable interior door storage bin manufactured for âŁselect⢠Frigidaire refrigerationâ units; it âis a molded thermoplastic door-mounted shelf designedâ to hold food items and accessoriesâ within the refrigerator door. â˘As a mechanical storage component, the bin⢠provides âŁorganized storage, interfaces â˘with the door liner and mounting clips or rails, â˘and⣠is sizedâ and shapedâ to fit specific⢠door cavity geometries and mounting features.
Within the appliance the door shelf bin is part of the mechanical⣠and user-access subsystem rather than âthe refrigeration or electrical â¤systems; it transmits static and dynamic loads⣠from stored items to the door structure⢠and mounting hardware,and⢠it must align with the door liner and closure surfaces to avoid interference with the gasket and full door closure. The bin interacts directly with mounting clips, rails or âmolded retention features on â˘the door inner panel,â and âindirectly with the hinge and door balance when heavily loaded, so mechanical integrity and correct installation are crucial⤠for reliable operation and safe load distribution.
In this⤠article readers will find a technical overviewâ of the bin’s function and typical mountingâ arrangements, guidance on verifying compatibility with specific refrigerator âŁmodels, common failure symptomsâ to watch for (broken mounting tabs, cracks, deformation, poor fit or âŁitems falling out), practical troubleshooting steps toâ isolate mountingâ versus structural failuresand replacement considerations such as confirming part numbers, choosing OEM versus âaftermarket optionsandâ ensuring correct installation and load âpractices to restore safe âoperation.
Table of Contents
- Function⤠andâ Role of the Refrigerator Doorâ Shelf âBin within Frigidaire Door Assemblies
- How the 240359001 Frigidaire Refrigerator White Door Shelf Bin Integrates â˘and Operates Within the Appliance Door âSystem
- Common⢠Failure Symptoms and Diagnostic Indicators for Door Shelf Bins
- Compatibility, Replacement Considerationsand Installation Procedures for the 240359001 Frigidaire Refrigerator White âDoor Shelf Bin
- Q&A
- Wrapping Up
Function and Role of the Refrigerator Door Shelf âBin within Frigidaire Door Assemblies
Theâ 240359001 âŁFrigidaire Refrigerator White⣠Door Shelf bin âisâ a molded door-mounted âstorage tray â˘that secures to the refrigerator⣠inner door⢠liner âand provides organizedâ containment for small containers and bottles.â Functionally this part transfers the load of stored items into âthe door liner through⢠its snap-in mounting tabs âŁand⣠rim support; stresses concentrate at the tab interfaces andâ along the front lip under cantilever loading. Fit and dimensional compatibility âwith the host âFrigidaire door assembly determine whether the bin sits flush, secures reliably during door motionand avoids âcontact with the â˘door gasket or âother internal components.
- Mounting interface: snap-fit tabs engaging liner⢠slots
- Intended loads: low-to-moderate domestic containers (condiments, small bottles)
- Common âŁfailure modes: cracked corners, elongated⢠tab holesand plastic creep/sag
- Maintenance: wash with mild detergent;⤠avoid aggressive solvents⤠that degrade the plastic
| Item | Description |
|---|---|
| Material | Injection-molded âthermoplastic (commonly ABS or âsimilar) with â¤reinforced â¤rim |
| Mounting | snap-in tabs â¤designed to engage matching slots â˘in Frigidaire door liners |
| Typical request | Containment and institution of door-stored items⤠while maintaining door-clearance and gasket clearance |
for technicians replacing or diagnosing issues with a âdoor shelf bin, verify tab spacing, engagement⣠depthand that replacement part âgeometry matches the host liner; slight differencesâ in âtab profile or lip height betweenâ OEMâ and aftermarket âparts will â¤affect retention and may cause intermittent disengagement. Inspect âfor mechanical wear at the tab âroots and rim; evidence â˘of⢠brittle fractures or elongated slots indicates the âneedâ for replacement. Proper installation is achieved by aligning the lip and pressing the bin untill theâ tabs engage-if the bin does not seat without excessive force,â confirm fit dimensions rather than forcing the âŁcomponent, as incorrect engagement can âproduce repeated⣠failures or damage to the âdoor liner.
Howâ the 240359001 Frigidaire Refrigerator White Door Shelf Bin integrates and⣠Operates Within the applianceâ Door System
The â240359001 Frigidaire Refrigerator White âDoor Shelf Bin integrates with the appliance door by engaging a series of molded retainingâ clips â˘and horizontal ârail pockets in the door liner. its rearâ flange and clip geometry locate the bin axially and âtransfer static loads intoâ the door structure,soâ correct⤠seating is necessary to avoid rattling and uneven stress on the clips. Becuase the â¤bin occupies the door cavity near the gasket and hinge areas, its outer profile and thickness are designed to clear the seal âŁand hinge path duringâ door closing andâ opening; mismatched replacements can âinterfere with the sealâ or alter hinge preload.
In operation the bin must withstand repeated insertion and removal of items, exposure to cold â¤and humidityand⢠occasional impact from heavy containers. Service technicians⣠should inspect the clip roots and âŁflange âinterfaces for hairline âcracks or plastic creep, verify⢠that the bin snaps fully âŁinto position with a âtactileâ clickand confirm that âthe door closes without binding.⣠For practical replacement, disengage the upper edgeâ by flexing the bin outward and lift out of â˘the lower⤠pockets; avoid concentrated point⣠loadsâ on the front lip and store only evenlyâ distributed items to reduce clip stress and â˘prolong service life.
- Mounting: Molded âretaining clips engaging door â¤railâ pockets.
- Material: Injection-molded white thermoplastic designed for âŁcold tolerance.
- Common âfailureâ modes: â Clip fracture, flange wear,⢠or dimensional distortion from heat exposure.
- Service tip: ⤠Confirm clip spacing and depth match the door liner before installing a replacement.
| Item | Description |
|---|---|
| material | Durable white thermoplastic resistant to low temperatures and mild impacts |
| Mounting type | Molded clipsâ and rear flange that engage horizontal pockets in the door liner |
| Compatibility | Designed for specific Frigidaire door liners; verify clip spacing â˘and â¤profile before substitution |
Common Failureâ Symptoms and Diagnostic Indicators for Door Shelf Bins
The 240359001 Frigidaire âRefrigerator Whiteâ Door Shelf Bin functions as a structural storage⤠tray that snaps into the refrigerator âŁdoor rail system to hold âŁbottles,jars,and small containers. Constructedâ commonly from high-density ABS or polypropylene,â the bin must⢠match the door rail clip geometry âŁand tab spacing of the specific Frigidaire door to seat correctly;â technicians should â¤confirm⣠fit by checking the clip pitch and tab shape against the failed part rather â˘than relying solely on model⤠compatibility lists. âIn normal operation the bin endures repeated shear⤠and bending loads âfrom loading and opening cycles; concentrated loads (for example, placing a âfull gallon jug at the outer edge) and exposure to âharsh solvents or prolonged UV can âŁaccelerate â˘embrittlement and lead to crack initiation⢠at the mounting tabs or along molded stress concentrators.
diagnosing a failing⢠door⣠shelf bin âinvolves both visual inspection and simpleâ mechanical tests. Look for visible hairline cracks, deformation where the bin meets âthe door⣠rail, persistent rattling⤠or audible clunks when the door â˘is opened,⣠and instances where stored items shift or fall out;â these symptoms typically indicate tab fracture, rail wearor loss of material stiffness. Practical â¤diagnostic checks include âa close inspection of the mounting tabs for brittle fracture,â a fit test to verify that the bin seats⣠flush without lateral play, âand a controlled⢠load test (apply a known weight of 4-6 kg near âthe outer edge andâ cycle the door) to reproduce sagging or disengagement. use the list below for common indicatorsâ and reference the quick⣠specification tableâ that followsâ for basic technical parameters.
- Visible cracks or âmissing pieces at mounting tabs â- often results in bin detaching under load.
- Excessive lateral play or ârattling – indicates worn rail lips⢠or deformed bin clips.
- Sagging under⣠typicalâ loads – loss of rigidity from material agingâ or impact damage.
- Items slipping or falling when door opens – misalignment or fractured âretention features.
- Discoloration or surface crazing – chemical⤠attack or UVâ exposure that precedes mechanical failure.
| Item | Description |
|---|---|
| Part number | 240359001 âŁFrigidaire Refrigerator White Door Shelf Bin |
| material | High-density ABS or polypropylene (model dependent) |
| Typicalâ mounting | Snap-inâ tabs that engage door⤠rail lips; verify clip⣠pitch and tab geometry |
| Max recommended point load | Approximately 4-6 kg at⣠outer edge for safe, repeated operation (avoid concentrated heavy loads) |
| Common failure point | Mounting tabs andâ molded stress concentrators â˘adjacent to clip features |
Compatibility, Replacement Considerationsand installation Procedures â¤for⢠the 240359001 âFrigidaire Refrigerator White Door Shelf âŁBin
The 240359001 Frigidaireâ Refrigerator â˘White door Shelf Bin serves as a structural storage component that transfers load from stored items to the refrigerator door via molded clips and a retaining lip. this bin is typicallyâ manufacturedâ from impact-resistant ABS and designed to engage specific door-liner slots; compatibility depends on the⢠geometry of the liner slots, â¤hook spacingand the depth of the door cavity rather than just âthe external dimensions. Technicians should verify âthat⤠the â˘liner’s â˘clip recesses and shelf support ledges â˘match the bin’s mounting pattern; mismatched âclip locations or differing âlip profiles⣠canâ allow the bin to â¤install but fail under load âor create interference with âadjacent shelves or the door gasket.
- Pre-install checks: âconfirm âŁpart fit with model number lookup and inspect liner âclip condition for wear or⤠deformation.
- Removal tools: flat-bladeâ screwdriver or trim tool to release retaining tabs;â gloves to protect hands from sharp edges.
- Removal⤠method: support âŁthe bin, depressâ or pry the retaining tabs inwardand pull the bin straight out to avoidâ stressing hooks.
- Installation method: align hooks⤠into liner slots, engage the top edge, then press the bottom until the retaining lip⣠snaps into place; avoid⤠levering against the gasket.
- Post-install â¤verification: load test with typical items, cycle the door to confirm no interferenceand check for secure engagement under lateral and vertical loads.
when replacing the shelf bin, inspect â¤failure modes such as hairline⣠cracks at the hook⢠roots, elongated slot interfacesand material creep where âthe bin bears repetitive load; replacing the bin âŁwithout addressing âa damaged door liner will result in recurrent failures. If theâ liner slots are damaged,repair options include replacing âthe liner section or using a reinforcement plate behind the slot to distribute load. For âinstallation, ensure the bin is fully seated by⤠observing that the retaining lipâ is flush with the liner face and that the hooks are fully engaged; a partially seated bin may appear to âfit â¤but will pop out when loaded orâ when the door isâ slammed.
| Item | Description |
|---|---|
| Material | Impact-resistant â˘ABSâ plastic |
| Mounting interface | Molded hooks and âretaining lip designed for âŁspecific⣠liner slot geometry |
| Common failure modes | Hookâ rootâ cracks,elongated liner âslots,deformation from overloading |
| Part number | 240359001 |
Q&A
What exactly âŁis part 240359001?
240359001 isâ an OEM Frigidaire refrigerator door shelf bin⣠– a white plastic storage bin that snaps into the âinner door panel to hold bottles,condiments and small items. It âis indeed a direct-replacement bin made to the refrigerator manufacturer’s shape and mounting⣠points.
How do⣠I confirm this bin fitsâ my Frigidaire refrigerator?
Check your refrigerator modelâ number (usually on aâ sticker inside the fresh-food section or on the⣠door frame) and compare it to the Frigidaire parts list or the â˘seller’s compatibility chart. You can also âcompare the â˘physical dimensions â˘and the shape/location of the mounting tabs on your original bin toâ the replacement – if the tabâ pattern and overallâ width/depth match, it will fit. If in doubt,consultâ an authorized Frigidaire parts dealer with your appliance model number.
How do I remove the old door shelf bin and install the â240359001 bin?
Most Frigidaire door bins remove âwithout tools: empty the bin, push/slideâ the bin upâ slightly to clear the lower stop, then pull straight out.To install, align⤠theâ mounting tabs with the⢠door slots â˘or rails, seat the top or bottom edge first depending on the designand⤠press firmly until it snaps âinto place. If your âmodel uses screws or clips,remove any retaining screws before removing the binâ and âreinstall them âafter seating the new bin.
Is this part left-â or right-specificor will âit work on either side?
Some refrigerator door bins⢠are symmetric â˘and fit either âŁdoor, while âŁothers are molded to a specific position (top vs. mid vs. âbottom) or side. 240359001 is a specific OEM bin shape; you should verify whether the original bin’s shape and tab locations match. the safest method is âto confirm fit by⤠model compatibility or by matching â˘the physical mounting features of your current âbin.
What âmaterial âis the bin made of andâ how should I âclean it?
The bin⤠is molded from durable food-grade plastic (commonly polypropyleneâ or similar). Clean with warm waterâ and mild dish soap; rinse âŁand â¤dry thoroughly. Avoid strongâ solvents, âabrasive scrubbersand prolonged⤠exposure to very hotâ water or dishwasher high-heat/dry cycles, which can deform or discolor the plastic.
Why is âŁmy door bin loose or falling out â˘- can it be repaired or should Iâ replace it?
Loose bins usually indicate broken or worn mounting tabs or damaged door mounting slots. â¤If the tabs⣠are cracked the reliable fix is replacement of the bin. Temporary repairs (epoxy, plastic welding, zip ties) can work short-term but are not recommended for long-term use as they may failâ or interfere with door operation. Replacing the bin (240359001 when compatible) is the proper repair.
Can I use this bin in âthe freezer section or other âappliance brands?
Door bin designs vary between refrigerator â¤and freezer compartments and âbetween brands. 240359001 is designed as⤠aâ refrigerator door shelf bin; it may not⢠fit freezer doors or other brands unlessâ the mounting geometry⤠matches exactly. Use parts that âare specified for the compartment and the brand/model to ensure proper fit and performance.
Where can I buy a genuine 240359001 bin and âhow do I make sure it’sâ OEM?
Genuine 240359001 â˘bins can be purchased from Frigidaire’s official â˘parts site, authorizedâ appliance â˘parts dealers,â or reputable online retailersâ that list OEM Frigidaire part numbers. To⤠ensure âit’s OEM,buy âfromâ an authorized dealer or a seller who explicitly states the part is âan OEM Frigidaire replacement and provides âthe exactâ part number and clear photos.Compare the item toâ manufacturer diagrams or the part â˘stamped on your existing bin âfor verification.
Wrapping Up
The 240359001 Frigidaire Refrigerator White Door Shelf Bin serves âas a functional⤠storage component designedâ to organize and⣠secure items within the refrigerator door. As a â¤molded shelf bin, it helps maintain order, prevents stored goods from shifting or fallingand contributes â¤to â˘efficient use of interior space.⣠Even though a simple component, âits â¤integrity and proper fit directly â˘affect dailyâ convenience and the overall user experience of the â¤refrigerator.
Accurate diagnosis and⣠timelyâ replacement âare important when the shelf âbin shows signs of cracking, warping, loose fitor âother damage. Identifying whether a problem stems from the bin itself, the door âtrimor mounting hardware avoids unneeded repairs and ensures a correct remedy. Using the âcorrect partâ number-such as the 240359001 Frigidaire Refrigerator White Doorâ Shelf Bin-and following recommended installation practices helps restore secure âstorage,â prevent secondary damageand maintain appliance function.
maintaining intact â¤and properly installed doorâ shelf bins is a straightforward but meaningful âaspect of refrigerator care. When issues arise, a â¤methodical⤠assessment and replacement withâ the appropriate⤠part support safety, reliability,⤠and âlong-term performance of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
