297216600 Frigidaire Refrigerator âDefrost Thermostat is a temperatureâactivated âdefrost⣠control âŁswitch used⢠in frostâfree refrigeration appliances. The device is typically a bimetallicâ thermostat (frequentlyâ enough referred to as a defrost thermostat) that senses the⤠temperature of the evaporator coil and functions âas⢠a âŁseries safety/interruption⣠switchâ in the â˘refrigerator’s defrost heater circuit.
Inside theâ appliance the thermostat is mounted âŁto â¤or clipped onto the evaporator coil and âcommunicates indirectly with the defrost control (timer or electronic control board) âand â˘the âŁdefrost â¤heater. During a scheduled defrost cycle the control â˘will âapply power âto the heater through the defrost thermostat; when the âevaporator⤠warms to the thermostat’s preset opening âŁtemperature the thermostat opens and interrupts current to the heater. This interaction prevents overheating of the evaporator and associated components, âŁhelps ensure complete âice⢠meltand contributes to stable refrigerationâ by⢠allowing⤠the system to âresume normalâ cooling âŁoncâ defrostâ is complete.
in this⤠article readers⢠will find a technical â˘overview of the â¤297216600 thermostat’s⤠function â˘and design,guidance on model and electrical compatibility considerations,common failure symptoms (such as aâ thermostat that remains âŁopen â¤and prevents defrost,or one that sticks closed and allows continuous heating),approachesâ for diagnostic evaluation âŁsuch as⣠continuity and mounting checks,and âŁpractical points â¤to consider⤠when replacing the part (matching temperature rating,terminal style,mounting clip,and harness compatibility). The emphasisâ is on providing⣠the technical context needed for a âtechnician,engineer,or informed appliance owner â¤to diagnose,evaluate,andâ select âan appropriate replacement componentâ safely â¤and effectively.
Tableâ of Contents
- function and Thermal Role âŁof the Defrostâ Thermostat â˘in Refrigerator Defrost Systems
- How the 297216600 Frigidaire Refrigerator Defrost Thermostat Works Insideâ the⤠Appliance
- Common failure symptoms âand Diagnostic Measurements for Defrost â˘Thermostat Faults
- Compatibility, âReplacement Considerations,⣠and StepâbyâStep Installation â˘and âTroubleshooting âProcedures
- Q&A
- The Conclusion
Function and Thermal Role of the Defrost Thermostat in Refrigerator⢠Defrost Systems
the 297216600 Frigidaire ârefrigerator Defrost Thermostat is a temperature-actuatedâ safety switch installed against the evaporator coil to control the defrost⤠heater circuit. âŁItâ is indeed a âbimetal-style device thatâ is â˘normally closedâ when cold, allowing the defrost heater âto receive power at the start of a defrost cycle; as theâ heater⢠raises the coilâ temperature to theâ thermostat’s cut-out setpoint the bimetal opens and interrupts power toâ prevent overheating. Correctâ operation depends on matching the thermostat’sâ activation/cut-out temperature, terminal styleand mounting method âto âŁthe refrigerator’s control strategy (mechanical timer or electronic controlâ board) and physical mounting⢠location on the âevaporator âassembly.
technicians diagnose âŁand â˘select replacementsâ by verifying continuity behavior across temperature and by confirming physical compatibility. Common⣠practical checks⢠include measuring continuity cold (expect closed) and warm (expect open), inspecting⢠the mounting clip⢠and lead length for secure âŁthermal contactand comparing â˘the thermostat specificationâ to the equipment wiring â˘diagram; a thermostat that fails to open⢠may allow excessive heater run âŁtime while a failed-open⣠thermostat prevents defrost heater operation and leads to ice â˘buildup. Forâ field repairs, confirm the part’sâ activation characteristics⢠and terminal type rather than relying solely on appearanceâ to ensure the âreplacement matches the system’s thermal control requirements.
- expected behavior: closed at low âcoil temperature, opens at cut-out temperature to terminate defrost.
- Common failure modes: stuck open (no defrost), âstuckâ closed â(overheating/extended defrost).
- Replacement checks: activation⣠temperature, terminal type, mounting clip⤠and lead length.
| Item | Description |
|---|---|
| Type | Bimetal temperature-actuated switch mounted to evaporator coil |
| Primary function | Interrupts defrost heaterâ circuit when coil reaches âcut-out temperature |
| Diagnostic â˘test | Continuity cold⤠(closed) â noâ continuity warm (open); use⢠multimeter and temperature stimulus |
| Replacement considerations | Match â¤activation temperature, terminal type, mounting clipand lead length to OEM specification |
How the 297216600 Frigidaire Refrigerator âŁDefrost Thermostat⣠Works Inside the Appliance
The 297216600 Frigidaire Refrigerator Defrost Thermostat ⢠is a temperature-actuated safety switch⣠that mounts directly to the evaporator coil â˘to monitor coil âŁtemperature during a defrost cycle.â Mechanically it is typically a bimetal-type switch: âthe contacts are closed when the evaporator â¤is cold and will openâ once the coil⤠heats to the thermostat’s calibrated release â˘point, interrupting power to the defrost heater soâ the heaterâ does not overheat the coil or surrounding components. Compatibility depends onâ the fridge’s harness, mounting clipand terminal â¤layout; this part â˘is âŁused âin â¤frigidaire âsystems that âemploy externally mounted bimetal defrost âthermostats, âbut technicians âshould verify terminal spacing and mounting âbefore replacing theâ existing device.
Forâ troubleshooting and service, âthe 297216600⤠behaves predictably: it should⣠show continuityâ at low coil temperatures and should open as the coil warmsâ during aâ deliberate â¤defrost test. Typical âfield checksâ useâ a continuity meterâ with the âthermostat â˘applied to cold surface⤠and then âŁgently warmed (hair dryer or hot water) toâ confirm the âcontacts open.Failure modesâ are straightforward to⣠interpret â˘in practice-stuck-open prevents theâ heater from⣠energizing and⣠causes heavy frost âŁbuild-up, while âstuck-closed allows âheater current until the timer or thermal cutout interrupts it. when replacing the unit, â¤matchâ the physical mounting and terminal type and â¤follow âthe appliance wiring diagram; no⤠polarityâ exists âon the two terminals, â˘but âsecure contact and proper â¤insulation areâ required for reliable operation.
- Intermittent or heavy âŁfrost on the evaporator indicates a likely open or⤠non-closing thermostat.
- Defrost heater running continuously suggests the thermostat is â¤stuck closed.
- Multimeter continuity cold-to-warm test is the primary field âdiagnostic.
- Verify âŁmounting clip and âterminal spacing for⢠mechanical compatibility before installation.
| Item | Description |
|---|---|
| Function | Temperature-actuated switch that âinterrupts defrost⤠heater whenâ coil reaches its release temperature. |
| Switch type | Bimetal (mechanical) defrost âthermostat with two-terminal connection. |
| Typical trip range | Opens in a narrow âtemperature âband (commonly â¤around â30-50°F / ââ1 to 10°C); â˘consult service âspec for â˘exact⢠calibration. |
Common Failure Symptoms and âDiagnostic Measurements for Defrostâ Thermostat â¤Faults
The 297216600 Frigidaireâ Refrigerator Defrost Thermostat is a âtemperature-activated safety switch âmounted against the âŁevaporator⣠or⤠in a thermal well to monitor coilâ temperature andâ protect the defrost heater.When the evaporator is âcold⢠the thermostat closes, allowing the defrost heater to powerâ on during a scheduled defrost cycle; as⢠the coil warms the thermostat opens âto interrupt heater current and prevent overheating.This component âis a simple⢠bi-metal or waxâelement thermal switch and⤠its correctâ behavior is â¤persistentâ byâ itsâ trip temperature andâ physical â¤mounting – mismatched replacements or poor thermal contact can cause⣠premature opening or âfailure to close, leading to⣠either persistent icing or unnecessary heater operation depending on the fault mode.
Technicians diagnose faults with visual inspection plus basic electricalâ measurements: check for continuity with the thermostat cold (typically âclosed) and an open circuit⤠when warmedand verify line voltage âis presentâ at⣠the thermostat during a commanded âŁdefrost so the problem is âŁisolated. Practical checks include placing the⣠thermostat inâ an ice bath toâ confirm closure (near 0 Ί), warming it â˘with a heat source to confirm it âŁopens (OL on most meters)and observing whether⢠the defrost heater âŁreceives voltage when the controller calls for âŁdefrost. Common failure symptoms and⤠quick diagnostic checkpoints are listed below; a simple reference table provides typical expected states and readings for field verification.
- Progressive frost build-up onâ the evaporator and reduced cooling â˘- suggests thermostat stuck openâ or failing to close.
- Water pooling or compressor â˘short â¤cycling with frequent defrost heater operation – âcan⢠indicate⣠a thermostat stuck closed or poor sensing leading to repeated defrosts.
- No âcontinuity at coldâ temperatures (ice bath) – electrical open inside âthermostat.
- Continuity at⢠warm temperatures – â¤thermostat stuck⢠closed âŁand â˘not interrupting heater.
- Voltage present âtoâ thermostat during defrost âbut no heater energization – check thermostat â¤continuity and wiring downstream to the heater.
| Item | Description |
|---|---|
| Cold continuity test | Place inâ ice/water; â¤expected â closed, meter ââ â¤0-5 Ί (indicates functioning close at low temp). |
| Warm open test | Warm to above typical trip (~50°F / ~10°C); expected open (OL), showing âswitch opens as coil temp rises. |
Compatibility,⣠Replacement Considerationsand StepâbyâStep Installation and Troubleshooting Procedures
The 297216600 Frigidaire Refrigerator Defrost Thermostat is a temperatureâsensing switch⤠mounted nearâ the evaporator⤠that controls the defrost heater circuitâ by changing âcontactâ state as the evaporator warms âand cools. It is typically⣠a bimetallicâ snapâaction device that is closed (low resistance) at âthe âcolder evaporator temperatures âso the heater can runâ during a timed defrostand â˘thenâ opens as the â¤evaporator reaches â˘the thermostat’s⣠trip⢠temperature to âprevent overheating. Compatibility is determined by mechanical mounting, terminal type and spacing, trip temperature rangeand voltage/current rating; replacements must âmatch these specificationsâ rather than just the⢠physical appearance â¤to ensure reliable operation and safe integration âwith the refrigerator’s control âboardâ and defrost âtimer or adaptive defrost⢠system.
For replacement and troubleshooting,start âby âŁisolatingâ power,accessingâ the evaporator cover,and âvisually inspectingâ the âmounting and wiring â˘for damage or corrosion. Verify the thermostat’s behavior with aâ multimeter: it should show nearâzero ohms when cold and open (no continuity) when warmed past its â˘trip point; if it fails these âtests,⣠replace it with a part matching⤠theâ original specifications. Common â˘failure modes include a thermostat thatâ remains open during defrost (resulting in excessive frostâ accumulation) or âone that ânever opens (allowing the heater to run âuncontrollably). After replacement, confirm correct operation by âinitiating a⢠manual â¤defrost cycle and checking that the heater receives power onyl while the sensor remains in the closed â¤state⢠and⣠that the evaporator temperature returns â¤to normal after the⤠cycle â¤completes.
- Shut âpower, remove â˘evaporator cover, note mounting orientation and terminal labeling.
- Measure continuity cold and after gentle warming; expect low âŁresistance when cold, open when warmed.
- Install matching part⤠(mechanical fit, terminals, trip â˘range, voltage/current rating), reconnect wiring, restore âpower.
- Run a manual or âdiagnostic defrost; confirm âheater energizes only âwhileâ thermostat is closed and opens asâ temperatureâ rises.
- If symptoms persist, âcheck defrost heater, wiring harnessand control⢠board outputs before âreplacing additional components.
| Item | Description |
|---|---|
| Function | Temperatureâactivated switch that âenables/disables⢠the defrost heater based on evaporator âtemperature |
| Contact âbehavior | Closed atâ low evaporator â˘temperatures (heater allowed), Open after reaching trip temperature (heater⤠cut off) |
| Typical electrical | Low contact resistance when closed; rated for refrigerator⢠heaterâ voltage (match OEMâ rating) |
| installation âŁnotes | mounting orientation and terminal type must match OEM; secure thermal contact with evaporator surface or bracket |
Q&A
what is Frigidaire part 297216600 and â˘what⤠does the defrost thermostat do?
Part â¤297216600 is the defrost âŁthermostat (also called a defrost limiter orâ defrost sensor) used on manyâ Frigidaire freezers/refrigerators. It is⤠indeed a temperatureâsensitive switch⣠that closes when the evaporator⤠is cold so â˘theâ defrost⢠heater can be energized during the defrost cycle,and âopens when⤠the evaporator has warmed to⤠a safe temperature to cut power to the heater. It prevents⣠the heater from overheating or running continuously.
Which models âis part 297216600 compatible with and how âŁcan I confirm âfitment?
Compatibility varies⤠byâ model and âyear. The easiest way⣠to âconfirm fitment is to check your refrigerator’sâ model number (usually on⣠a â˘sticker âinside the fresh-food âŁor freezer compartment) and⣠look⣠it up on Frigidaire/parentâcompany parts lookup â˘or a trusted parts supplier. âŁYouâ can alsoâ compare the⢠old part (shape, connector, mounting â˘clip)⣠and the â¤OEM part number printed on the replacement. If in doubt, provide your refrigerator âmodel number to⢠the parts vendor⤠or technician for verification.
What âare common⤠symptoms of âŁa bad defrost⢠thermostat?
Typical symptoms include â˘repeated frost/ice buildup on the evaporator, poor cooling or a âwarm refrigerator compartment, the compressor running almost continuouslyor, less âcommonly, the defrostâ heater running continuouslyâ causing excessive âmelting and water leaks. A failed thermostat can either fail open (preventing defrost) or fail closed (preventing heater cutoff).
How canâ I test the defrost âthermostat⣠to see if it’s working?
Always unplug the applianceâ before testing. Remove the evaporator cover to access the thermostat. â¤Use a multimeter set âto continuity or resistance: when the thermostat is cold (place it in a cup ofâ ice water â˘or⢠leave itâ against the cold evaporator),it should show continuity (closed). When⤠warmed (hold âit in your⣠hand or⤠useâ a warm â¤air âsource carefully), it should â˘open and lose continuity. If it does not â˘change state, â¤theâ thermostat isâ faulty and should be replaced.
Where is theâ thermostat located andâ how do⤠I access it?
The thermostat⢠is â˘usually â˘clipped to the evaporator coil or seated in aâ foam/sensor pocket on âthe evaporator assembly behind the freezer⢠backâ panel.To access it you typically â¤unplugâ the refrigerator,⢠removeâ shelves/drawers, unscrew the rear evaporator cover âin the freezerand then unclip or unplug the sensor and its wiring harness.Take care aroundâ sharp sheet metal âŁand âtheâ evaporator fins.
Can I âreplace part 297216600 âmyselfand what are âŁthe basic⢠steps?
yes, a competent DIYerâ can replace it. Basic steps: 1)â Unplug the fridge;â 2)⤠Empty the freezer â˘section andâ remove shelves/drawers; 3)⢠Remove⤠the evaporator cover to expose the thermostat; 4) Unclip/remove⢠the old thermostat⣠and unplug the â˘connector; 5) Install theâ new thermostat âin the⢠same position and⤠orientation, secure the â¤clip, reconnect the harness; âŁ6) â¤Reassemble panels â˘and restoreâ power.â Allow the unit to run and⢠verify proper âdefrost cycles. If you’re uncomfortable working near electrical connections or evaporator components, hire a technician.
Is it safe⣠to bypass the defrost thermostat⣠if it’s⢠bad?
No.The defrost thermostat is a safety device that prevents the defrost heater âŁfrom overheating or running indefinitely. bypassing it can create aâ fire risk, damage âthe evaporator or surrounding âcomponentsand cause⤠refrigerant/oil â˘damage.Always replace a faulty⤠thermostat with the correctâ OEM part rather than bypassing it.
How much does the 297216600 thermostatâ cost âand â˘any buying tips?
Prices vary by supplierâ but the part â¤is generally inexpensive compared with â˘other major components (frequently enough in the low tens of dollars). Buy⢠a genuine OEM or reputable aftermarket replacement thatâ matches the original connector and mounting clip. Verify fitment with your appliance model â¤number and keep â¤the retailer’s return policy âŁin case it’s the wrong part.
The Conclusion
The 297216600 Frigidaire⤠refrigerator defrost â˘thermostat is a key component in the appliance’s defrost system, sensing evaporator temperature and enabling the defrost heater at the appropriate time. Its correct operation prevents excessive frost buildup, supports consistent â˘cooling performanceandâ reduces stress on the compressor and other⣠refrigeration components, contributing to overall energy efficiency and â˘appliance longevity.
Accurate diagnosis is important when defrost-related symptoms appear-such as âpersistent ice accumulation, irregular coolingor failure of the defrost cycle-to determine whether the thermostat âor another⢠component âŁis âŁat fault. Following proper diagnostic⤠steps,⤠referencing manufacturer guidanceand, when necessary, engaging aâ qualified technician⢠helps⤠ensure âthe underlying issue is⢠correctly identified. When replacement is warranted, using⢠theâ correct 297216600 part or⣠an approved equivalent restores proper⢠defrost function and helps maintain reliable â¤refrigerator performance.
Incorporatingâ routine checks of the defrost system and addressing âthermostat failures promptly can⤠prevent more extensive damage and preserveâ the â¤appliance’s efficiency. âŁTimely, appropriate repair or replacement âŁsupports continued â˘safe⣠and effective operation of the refrigerator.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
