WB32X107 GE Range Stove Cooktop 6″ Drip ā¤bowl Chrome ā¢Large Hole is a stamped, chromeāplated drip pan intended for use with ā¤a 6āinch surface heating element on compatible āGE electric ranges. ā¤It is a replaceable cooktop ā£component that sits in the cooktop opening beneath ā¤the exposed coil or burnerā head and provides a shaped recess to collect spills, center the elementand maintain the intended clearance between theā element and the cooktop surface.
Functionally, the drip bowl is part of the cooktop top assembly and interfaces directly with the burner element, burner support or bracketand theā£ surrounding ācooktop āopening. It protects underlying wiring, switchesandā insulation from food debris and liquid ingress, contributes to heat and airflow characteristics around the elementand providesā the correct mechanical alignment for stable elementā seating. The “large hole” variantā£ accommodates larger burnerā¤ diameters or specificā£ retention hardware; correct hole size, tab placementand fit are crucial to prevent contact between the element and sheet metal thatā can lead to arcing, uneven heatingor prematureā component wear.
This article explains theā¤ WB32X107S design āand operational role, documents compatibility considerations (hole diameter, mounting tab locationsand model crossāreferences)and ā¤lists common failure symptoms āsuch as ā£corrosion, warping, plating delaminationand improper seating. It also providesā¢ diagnostic and troubleshooting guidance for assessing āfit and functionand outlines practical replacement considerations including verifying ā¤OEM part number or equivalent, material/finish differences, required āclearancesand service safety āitems to observe during removal and installation.
Table of Contents
- Function and Role of the Cooktop Drip Bowl in Burner āProtection, Spill Containmentand Thermal Management
- How the WB32X107 GE Range Stove cooktop 6″ drip Bowlā Chrome Large Hole Integrates with Burner Assemblies and Mounting Hardware
- Common Failure Symptoms and Diagnostic Troubleshooting Procedures for Drip Bowl Deformation, Corrosionand Misalignment
- Compatibility, Replacement Considerationsand StepābyāStep Installation for WB32X107 and ā¢Equivalent ā¤Cooktop Drip bowls
- Q&A
- Concludingā£ Remarks
Function and Role of the Cooktop Drip ā£Bowl in Burner Protection, Spill containmentand Thermal Management
Theā¢ WB32X107 GE Range Stove Cooktop 6″ Drip Bowl Chrome Large Hole is a chrome-plated drip pan sized for use with ā£6-inchā£ burner assemblies on compatible ā¤GE ranges. Its primary mechanical role āis to āintercept liquid and āparticulate fallout from cookware before those contaminants reach the burnerā or the igniter assembly; the large central aperture preserves the correct burner-to-venturi clearance so that gas and primary air flow remain unobstructed.ā¤ By ā¢providing a ā¢defined rim and collection area, the drip bowlā limits conductive and capillary spread of spills, which reduces the likelihood of fouled ports and improperly distributed flames that can arise when residues bridge burner parts.
Functionally the part also contributes to local thermal management: the reflective chromeā surface and steel substrate alter radiative exchange and can reduce heat transfer to theā underlying cooktop structure, while the bowl shape creates an air gap that affects convective flowā¢ around the burner. Improper seating, deformationor using a mismatched drip bowl canā¤ change flame shape āor create hot spots on adjacent components, so technicians should verify correct fit and inspect for warpage or corrosion during service.Practical service steps include removingā the bowl for degreasing and visual inspection, confirming the large hole aligns with theā burner head and orificeand replacing the part with the ācorrect WB32X107 ā£when ā¤physical damage or excessive pitting compromises sealing or heat behavior.
- Protects burner and igniter āfrom spills and debris while maintaining gas/air flow through the large central opening.
- Channels liquids away from sensitive components to reduce ignition problems and port clogging.
- Modifies local heatā transfer; proper fit prevents āflame distortion andā¤ component overheating.
- Service checks: ā¤alignment, corrosion, deformation,ā and cleanlinessā¢ to preserveā performance.
| Item | Description |
|---|---|
| Part number | WB32X107ā (fits designated GE 6″ burner assemblies) |
| Material | Chrome-platedā steel-reflective surface for radiative control and durability |
| Mounting | Drop-in style āaround burner head; ālarge central hole ā£to accommodate burner geometry |
How the WB32X107 GE rangeā¤ Stove Cooktop 6″ Drip Bowl Chrome Large Hole ā£Integrates with Burner Assemblies and Mounting Hardware
The WB32X107 GE Range Stove Cooktop 6″ āDrip Bowl Chrome Large Hole serves āasā£ the interfaceā¤ between the burner head and the cooktop surface,providing both mechanical clearance for larger 6-inch burner assemblies and a catchment areaā£ for spills.Installed beneath theā burnerā¤ cap āand above the cooktop cavity, the chrome-plated bowl positions the burner stem and igniter while routing liquids away from control valves and electricalā components. Because theā¤ bowl has a larger central aperture, it accommodates burner ā¢designs with extended bases or integrated āflame distributors; installers must confirm thatā the mounting tab spacing and orifice alignment on the replacement bowl match the original cooktop geometry to maintain correct flame patterns and safe operation.
Integration withā mounting hardware is primarily a matter of alignment and clearance: the bowl ā¤must sit flush inā¢ theā¤ cooktop opening, engage anyā locatingā¤ tabs or ā¢spring clipsand allow the burner assembly to seat without lateral play that could stress the gas āvalve or igniter.During reassembly technicians should verifyā that the burner headā centers over theā orifice and that the igniter gap and electrical connector are unobstructed; mis-seating the bowlā£ can cause inconsistent ignition, yellowing flamesor intermittent clicking from the igniter. Routine service checks includeā inspecting mounting clips āand the bowl edgeā¢ for deformation, ensuring theā chrome finish has not warped near high-heat zonesand ā¤confirming that cleaning has ānot altered the bowl’s fitment or clearance to the burner.
- Alignment: engageā¤ locating tabs or clips before fastening to prevent lateral displacement.
- clearance: ensure the burner cap and igniter have sufficient verticalā¤ and lateral clearance through the large hole.
- Compatibility: verify tab spacing and orifice position against the original āpart to avoid flow or ignition issues.
- Maintenance: clean without abrasive methods āthat could change the bowl profile or chrome coating.
| Item | Description |
|---|---|
| Hole diameter | Configured for 6″ burner assemblies to provide required clearance for larger burner bases. |
| Material | Chrome-plated steel; provides corrosion resistance but ā¤can deform underā extreme ālocalized heat or aggressive cleaning. |
| Compatible burner type | Sealed or open gas burners that share theā£ same mounting-tab geometry and orifice location onā GE ranges. |
| Mounting method | Locating tabs, spring clipsor screw ā£points that secure the bowl to āthe cooktop and align the burner assembly. |
Common Failure Symptoms and Diagnosticā¢ Troubleshooting Procedures for Drip Bowl Deformation, Corrosionand Misalignment
The WB32X107 GE Range Stove Cooktop 6″ Drip Bowl Chrome Large Hole is a stamped chrome-plated steelā insert that locates aroundā¢ a 6-inch burner assembly to capture spills and provide a defined seating surface for the burner head. In normal condition the bowl maintains a flush interface with the cooktop deckā¤ and a concentric fit with the burner so heat distribution ā¢and ignition patternsā¤ remain stable. Deformation from thermal cycling or impact, chromium plating lossand ālocalized corrosion change the seatingā¤ geometry and surface roughness; ā¢thisā can cause burner rocking, asymmetric flameā pattern, intermittent ignition, soot/deposit ā¢accumulationor electrical contact with coil-type elements on some cooktop designs. Technicians should understand that compatibility is both geometric (outer diameter, center āapertureand ātab locations) and functional (seating to prevent gas/air flow disruptions), so an out-of-spec bowl will affect burnerā performance even if the element āitself tests within tolerance.
- Visible warping or bent rim – inspect with a straightedge for gaps between bowl and cooktop deck.
- Asymmetric flame or yellow tipping -ā check for misalignment or obstruction of the āburner head by the bowl.
- Burner rocking or looseness – inspect locating tabs and āmounting clips for deformation or wear.
- Surface āpitting, flaking chromeor perforation – indicates corrosion ā£that can change heat transfer and trap residues.
- Intermittent electrical arcing or ā¤shorts on coil elements – verify clearance betweenā¢ element ā¢terminals and the bowl.
Followā¤ a systematic diagnostic sequence: frist, turn off gasā and electrical supply, then remove the burner and bowl to perform ā¤a flatness check with a straightedge āand āmeasure āconcentric clearance aroundā¤ the burner stem. Verify tab locations and ā£hole diameter against the replacement part specification; anā OEM-fit part like the WB32X107 provides nominal positioning that is difficultā¤ to restore by reshaping without compromising plating. If warpage exceeds approximatelyā 1-2 mm across the seating surface, ā£if chrome has ā£delaminatedor if pitting ā£has produced holes,ā replacement is the recommended remedy. For marginal ā£corrosion,mechanical cleaning followed by a corrosion-inhibiting high-temperature surface treatmentā can beā a temporary repair,but confirm that the bowl still seats flush and that burner geometry and ignition behavior returnā£ to expected parameters before returning the appliance to service.
| Item | Description |
|---|---|
| Material | Chrome-plated stamped steel; plating condition affects heat/residue behavior |
| Fit | Nominal 6″ outer size with a largeā center aperture; correct tabā placement required for proper alignment |
| Common āfailure modes | Thermal ādeformation, ārim ā¢bending, plating āloss, pitting/corrosion, mounting tab damage |
Compatibility, Replacement Considerationsand StepābyāStep Installation for WB32X107 and Equivalent Cooktop Drip āBowls
The WB32X107 GE Range Stove Cooktop 6″ drip Bowl Chrome Large Hole is a nominal 6āinchā£ drip bowl intended to capture spills and position the burner cap relative toā£ the burner head. Compatibility depends on three mechanical features: outer diameter, the diameter and geometry of āthe central openingand the retaining/tab interface that locates the ābowl on the cooktop. When evaluatingā replacements, āmeasure the bowl āouter diameter and āthe spacing/shape of any locating tabs or notches;ā¢ chromeāplated steel construction is common and provides corrosion resistance and a smooth cleaning surface, but distortion ā¤from prolonged heat or impact can prevent an otherwise correctā part from seating and maintaining consistent burner alignment. Such as, a correct WB32X107 replacement will sit flush with the cooktop surface and allow the burner cap to center over the flame ports without ā¤lateral play that would alter flame shape.
- Shut off power or gas supply and remove grates and burner caps to expose the dripā¢ bowl.
- Lift out the existing bowl and inspect locating tabs, cooktopā surfaceand burner head for deformation or corrosion.
- Align the replacement bowl so theā central opening clears ā¤the burner head and the locating tabs engage the cooktop recesses.
- Seat the bowl fully, reinstall āburner cap and grates, restore power/gasand verify stable flame pattern and burner ignition.
| Item | Description |
|---|---|
| Model | WB32X107; nominal 6″ drip bowl with large central opening |
| Material | Chromeāplated steel ā¢for surface durability and ease of cleaning |
| Fit considerations | Match outerā diameter, central opening clearanceand tab/notch geometry to the cooktop |
During installation, avoid forcing a bowl into place ā-ā¢ misalignment can liftā theā burner cap or bind the ā¢ignition electrode and produce āuneven flame or failed ignition. Some ranges secure bowls with retention screws or spring clips; if present, retain original hardware and torque screws only toā¢ theā¤ manufacturer’s specification to prevent distortion. After replacement,run each burnerā¤ on low and high settings to confirm a uniform flame and stable ignition; persistent yellow tipping,delayed ignition,or sputtering indicates either an alignmentā issue,a damaged burner head,or ā£an incorrect bowl that allowsā¢ gas flow disruption ā¢and should be reassessed before regular use.
Q&A
What exactly is the WB32X107 ā¤”6″ Drip Bowl Chrome Large Hole”?
WB32X107 is a GE replacement drip bowl ā¤(also called a burner panā¢ or burner bowl) ādesigned for ranges with a ā¢nominal 6-inch burner area.ā “chrome”ā describes the plated finish (chrome-plated steel) and “Largeā£ Hole”ā¤ means the ācenter opening āis sized toā acceptā¤ larger burner heads or inner rings used on some ā¤GEā¢ burners.
How do I know if this drip bowl fits my GE range?
Check yourā¢ range’s model number (usually on a tag ā¢inside the āoven door frame or ā¢behind the storage drawer) and compare it to the parts list on GE’sā parts site or your owner’s ā¤manual. You can also measure āthe burnerā¤ opening: this part is intended for 6″ style burners with ā¤a large center opening. If in doubt,search the modelā£ numberā¤ plus “WB32X107” on theā¤ GE partsā¢ lookup āor contactā¤ GE ā£support to āconfirm compatibility.
Can I install ā¤the WB32X107 myself? What are the installation steps?
Yes, it āis typically user-replaceable. General steps: ā¤1) Turn off/unplug the range (and shut off ā¢gas for ā¢gas ranges) and make sureā¢ surfaces ā£are cool. 2) Remove grates or coil element and burner cap/inner ring as applicable. 3) āLift out the old drip bowl.ā£ 4) ā¤Set ā£the new WB32X107 into the ā£cooktop so it seats flatā and aligns with anyā notches or receptacles. 5) Reinstall burner head, cap, coils ā¢orā grates. 6) Restore power/gas and test ignition/operation.ā Do notā£ force parts; if burners ādo not seat properly or flame is uneven, re-checkā¢ alignment or consult ā£a technician.
Is this āpartā£ suitable for electricā¢ coil and gas burner applications?
WB32X107 isā¢ usedā£ on surface burners; however, weather it fits an electric coil orā¢ a gas burner depends on the specific range design. many electric coil 6″ element ranges useā£ similar āround drip pans, while some gas rangesā£ use burner bowls with ā¢large center holes. Always verify compatibility with your specific model-do not assume interchangeability between sealed gas surfaces and electric coil assemblies without āconfirmation.
How should āI clean and maintain the chrome drip bowl?
Hand-wash using warm soapy water and a non-abrasiveā¢ sponge. For baked-on grime, soak the pan in hot water with dish āsoap or a baking soda paste, then gently scrub. Avoid āsteel wool, harsh abrasive cleaners, strong alkaline oven cleanersor bleach-these can ādamage ā¤the chrome plating. Dishwashers may accelerate tarnishing and are not recommended for maintaining the finish.
What is the difference between a “large āhole” andā “small hole” drip bowl?
The center opening sizeā differs: a large hole āaccommodates larger burner heads, inner ringsor sealed gas burner assemblies that require more clearance. A small hole is used where the burner assembly sits closer toā theā cooktop surface. Using the wrong hole size can prevent correct burner seating or interfere with flame/airflow, so select the correct typeā¢ for your āburner.
My drip bowl is rusted or the chrome is flaking-can it beā repaired?
If the chrome plating is chipped, flakingor the steelā¤ underneath is rusting, replacement is recommended. Surface rustā can sometimesā be removed and the pan cleaned, but once plating is compromised the protection is ā£gone ā¤and rust will recur. Replace āwith an OEM orā equivalent-quality part to restore fit,finish,and safety.
Where should Iā buy ā£WB32X107 and how do I ensure I get a genuine āOEM part?
Buy from GE’s official parts website, authorizedā appliance parts dealersor reputable retailers.Verify the part number (WB32X107) and your ā¢appliance model before purchase. OEM parts are labeled ā¤with GE part numbersā£ and packaging; if buying from third-party sellers,ā£ check seller ratings and return policies. If unsure, contact GE parts support with your appliance model āfor ā¢confirmation and orderingā help.
Concluding remarks
The WB32X107 GE Range Stove Cooktop 6″ Drip bowl Chromeā Large Hole serves asā£ aā¤ functional and cosmetic component of a range, collecting spills and debris around the burner, protecting āthe cooktop surface from staining and corrosionand contributing to the appliance’s overall appearance. As a matched replacement part, it helps maintain proper spacing and alignment of burner elements and supportsā routine cleaning and upkeep of the cooking area.
Timely inspection, accurate diagnosis of wear or damageand replacement with the correct WB32X107ā or āa compatible OEM-designated part are critically important to preserve performance and prevent further issues. When dents, warping, severe ācorrosionor misfit are ā¢observed, replacing the drip bowl rather than attempting improvisedā repairs ensures reliable operation; consult the āappliance’s documentation ā¢orā a qualified service technician if there is āany uncertainty aboutā¤ compatibilityā or installation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
