WB17X5113⤠GE Oven Oven Cooktop â¤Burner Receptacle Kit is anâ appliance wiring component designed to provide the⣠electrical interface between a cooktop⣠orâ oven surface burner and the range wiring harness. As a receptacle kit it typically includes the âinsulating housing and metal terminals or clips that accept theâ burner element’s terminal studs,â forming a secure, heatâresistant electrical connection within the appliance chassis.
Inside the appliance the receptacle serves both electrical âand mechanical roles: it transmits current from the harnessâ or control module to the heating element while âŁmaintaining insulation and strain relief under high temperatures âand vibration. It thus interacts directly wiht the surface burner element⤠or terminal post, the range wiring harness â˘or pigtail,⣠and nearby controls or relays that switch power to the element. Because the component is exposed to elevated temperatures and occasional mechanical stress, material selection, terminal contact geometryand mountingâ location all â¤affect longâterm conductivity and safety.
This⣠article will describe the WB17X5113 receptacle’s function and typical applications, outline model compatibility and how to verify fitment, list commonâ failure âŁsymptoms (such as intermittent heating, arcing, discoloration,⤠or visible terminal damage)and coverâ practical troubleshooting checks a technician or appliance owner can perform to isolate a receptacle fault. It will also discussâ replacement considerations including matching terminal types and heat ratings,inspection criteria,and safety precautions to observe when servicing or âŁreplacing theâ kit.
Table of Contents
- Function and electrical role of the cooktop⤠burner receptacle in GE range systems
- How the WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit integrates, interfaces and operates inside the appliance
- Diagnostic symptoms â˘and electrical failure modes indicating a⤠faulty cooktop burner receptacle
- Compatibility matrix, replacement considerations, installation best practices and onâunit troubleshooting for the WB17X5113 kit
- Q&A
- Final Thoughts
Function and electrical role of the cooktop burner receptacle in GE range systems
The WB17X5113â GE Oven Oven Cooktop Burner Receptacle Kit functions as the insulated electrical junction between a cooktop surface element and the appliance wiring harness. It holds the element’s spade terminals in a secure, heat-resistant housing and⤠provides âstrain reliefâ and spacing to prevent â¤shorting and arcing at high temperatures. Technically, the âreceptacle isâ a⣠passive connector: it⣠does not regulate âŁcurrent but must maintain low-resistance contact under thermal cycling and âvibration typical in range operation. Use of the correct OEM receptacle ensures terminal alignment and thermal material properties match theâ element â¤and harness⢠geometry, â¤which is why model-specific⢠replacement parts are recommended for reliable service life.
Failing receptacles commonly âŁpresent as intermittent⤠heating, visible âŁcharringâ or melted plastic at the⣠connectoror audible arcing; these symptoms point to increased contact⢠resistance and â˘localized⢠heating. Troubleshooting typically includes a âvisual inspection, continuity check of the connectorand measuring voltage at the disconnected terminal while the burner control⣠is operated⢠(with proper safety precautions). When replacing the receptacle, confirm⢠compatibility with the range model and element terminal type, ensure terminalsâ are tight⤠and free of corrosionand route wiring away from hot surfaces. The receptacle’s role is mechanical and conductive, so correct installation restores safe, low-resistance connections rather than â˘changing element performance characteristics.
- Common failure signs: intermittent heat, discoloration, melting,⢠or arcing at the connector
- Basic checks: visual inspection, continuity⤠testand voltage verification with power off for replacement
- Installation tips: use OEM part for fit and heat resistance, secure spade terminals, avoid wire strain
- Compatibility: match â¤terminal style and harness⢠connector to the range model
| Item | Description |
|---|---|
| Function | Provides insulated⤠electrical connection and mechanical support between element and harness |
| Electrical habitat | Operatesâ in standard domestic⤠range âŁvoltages⤠(120/240 VAC) and ârepeated thermal cycling |
| Design considerations | Heat-resistant housing, low-resistance metal contacts, â˘correct terminal spacingâ for element fit |
How the WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit integrates, interfaces and âŁoperates inside the appliance
The âWB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is a replacement connector assembly that directly interfaces between the oven’s wiring harnessâ and the individual electric cooktop burner terminals. It mounts at the⤠cooktop or control-area chassis to provide a mechanically secure,thermally⣠resistant âsocket for the burner lead; âthe molded housing locates and retains the spade terminal while the mating contact provides a lowâresistance,highâcurrent electrical path. In practical installations this kit is used where the original⣠receptacle has degraded from heat cycling or arcingand it is indeed manufactured⤠to match the OEM terminal spacing and mounting footprint so it plugs⤠into the existing harness without reârouting or modifying theâ wiring harness.
Electrically, the receptacle relies on a compressive metal âcontact to minimize contact âŁresistance and heat generation under normal loadand theâ polymer housing is âŁspecified to resist elevated temperatures encountered near the cooktop. Mechanical retention features reduce motion that would otherwise loosen the connection during thermal expansionand the âdesign tolerances help prevent intermittent heating and arcing. Typical diagnostic indicators that the receptacle has failed include âintermittentâ burnerâ operation, visible discoloration or â¤melting of theâ housing,â and localized heating at the connector; âcorrective procedure âexamples include isolating power, removing the cooktop to access the harness, disconnecting the old receptacleand⣠installingâ the replacement while ensuring correct terminal orientation and secure mounting.
- Key features: keyedâ housing for correct orientation, heatâresistant insulating materialand crimp or pushâfit metal contacts for âlow resistance.
- Common failure symptoms: intermittent burner âoutput, visible charringand increased connector temperature âunder load.
| Item | Description |
|---|---|
| Connector type | Standard spade receptacle sized to accept cooktop burner terminals (approximately 1/4″ spade) |
| Material | Highâtemperature thermoplastic⣠housing with plated â¤metal contact for low resistance |
| Typical service action | Replace defective receptacle with matching kit; verify tight contact âŁand secure mounting, then test âŁburners under power |
Diagnostic symptoms âand electrical failure modes indicating a faulty cooktop â˘burner receptacle
the WB17X5113 GE Oven â¤Oven Cooktop Burner Receptacle Kit is a replacement connector assembly that provides the mechanical and electrical interface between a cooktop burner element or igniter and the appliance wiring harness. It secures theâ element terminals, maintains low-resistance contact under thermal cyclingandâ isolates the connection⤠from vibration and moisture. Technicians should treat the receptacle âŁas âŁaâ common failure point when an⤠otherwise-good element â¤shows intermittent heating,â partial heat output, visible arcing âat the terminalor a complete loss of circuit continuity despite correct supply voltage to the harness.
Diagnosis combines visual inspection and â˘basic electrical tests:⢠look for melted or discolored housings,⢠flattened or spread terminal⤠bladesand evidence of arcing or corrosion. Perform a cold continuity check across element-to-harness terminals and verify supply voltage at the harness with the control calling for heat; a sudden rise in contact resistance orâ absence of voltage at the receptacle under load indicates the connector or it’s seating is faulty rather than â¤the element. Practical examplesâ include a⤠cooktop that heats only at high settings (suggesting intermittent contact under⢠load) or a burner that sparks audibly âat the terminal when energized (indicating a âcompromised insulation or loose blade).
- Open circuit (no continuity) between element and harness despite correct wiring.
- High contact resistance causing reduced heat or only partial element operation.
- Visible melting, discoloration, burned plasticor carbon tracking around terminals.
- Intermittent operation or arcing noises at the receptacle under load.
| Item | Description |
|---|---|
| Continuity | Cold continuity should be near 0 Ί across element-to-receptacle contact; readings substantially â˘above 1-2 Ί indicate âŁa poor connection. |
| Voltage under load | With the control calling for heat, verify expected line voltage at the harness; absent or fluctuating âvoltage at the receptacle points to â¤an open or high-resistance connection. |
| Visual condition | Discolored⤠or deformed housing, loose terminalsor signs of arcing typically⤠require replacement âof the receptacle rather than the element. |
Compatibility matrix, replacement considerations, installation best practices and onâunit troubleshooting for the WB17X5113 kit
The⢠WB17X5113 GE Oven Oven Cooktop Burner âReceptacle⢠Kit provides the replaceable terminal block that connects the appliance wiring harnessâ to the burner igniter or spark electrode assembly. The kit consists of an insulating body and embedded metal terminals sized⣠to withstand repeated thermal cycling and the âmechanical stresses of push-on spade connectors; compatibility depends on matchingâ the terminal count,⢠spacing and mounting footprint to the original part. Technicians should verify the harness connector type, the⣠location of mountingâ screws or studs, âand any orientation-specific insulation⤠features before ordering a replacement, as visually similar receptacles âcanâ differ in terminal arrangement and âŁclearance to adjacent components, which affects both fit and safe operation under repeated heating cycles.
Follow a methodical installation and diagnostic sequence to confirm whether the receptacle is the root cause of ignition or intermittent⢠electrical faults. Photograph wiring before disassembly, then disconnectâ power and perform a visual inspection for⤠cracked insulation, corrosion on terminalsor evidence of overheating;⤠use a multimeter to check continuity from the control⢠harness to eachâ spade terminal and measure for unintended shorts to chassis.Typical troubleshooting outcomes include: an open circuit or high-resistance connection at the receptacle (replace the kit), intact continuity but âŁno ignition voltage from the control boardâ (test the control board and wiring upstream)or intermittent sparkingâ caused by loose terminals (re-seat or replace the receptacle and verify secure mechanical retention). When installing a replacement, ensure terminals âare âfully seated, wiring is routed âto avoid chafing and â¤high-heatâ contactand fasteners areâ torqued to secure the block without cracking the insulator.
- Compatibility checklist: correct terminal count/spacing, mounting footprint,⤠and harness mating style.
- Basic benchâ tests: continuity from harness to terminal, check for short to chassisand visual inspection for corrosion or brittle âinsulator.
- Common symptoms indicating receptacle failure: no ignition, intermittent ignition, visible arcing⤠or melted insulation at the connector.
- Installation notes: photograph wiring, disconnect power, replace withâ highâtemperature rated connectors if neededand avoid overtightening mounting screws.
| Item | Description |
|---|---|
| Termination type | Pushâon spade terminals; confirm number and orientation to match harness |
| Mounting | Screw or â¤stud mounting to oven chassis; spacing must match original to maintain clearance |
| Typicalâ failure modes | Corrosion, â¤loose terminals, cracked insulator, thermal degradation causingâ open or intermittent connections |
Q&A
What is the WB17X5113 cooktop burner receptacle kit and what does it do?
The WB17X5113 is a replacement receptacle kit used on many⤠GE gas/electric ranges and electric cooktops to connect the surface burner (coil orâ sealed element) to the appliance wiring harness. It provides the electrical terminals and insulated housings that the element plugs into,ensuring a secure,heatâresistant connection âŁbetween âthe element and âthe range wiring.
What are⤠commonâ signs that the receptacle kit has failed?
Common âsymptoms include a burner that won’t heat⤠or heats intermittently, visible arcing or sparking at theâ burner connection, melting or â˘discoloration of the receptacle plastic, aâ burning or hot odor âŁnear the cooktopor excessive â¤heat transfer to the cooktop wiring. Any visible damage or⣠intermittent operation usually indicatesâ the receptacle should be replaced.
How can I test theâ WB17X5113 âŁreceptacle to confirm it’sâ bad?
First disconnect power to the range at the breaker.Remove the element and⣠visually inspect the receptacle for burning, corrosionor â¤melted plastic. Use a â˘multimeterâ set to continuity or resistance to check for continuity from the element terminals to the corresponding harness wires⢠(with power off). With the range powered (only if you are experienced and take proper precautions), âyou can verify proper line voltage to the âterminals when a burner isâ switched on. If⣠the receptacle shows intermittent continuity, high resistanceor⣠visible⤠damage, it should be replaced.
Can I replace only the WB17X5113 receptacle kitor do I needâ to replace the entire wiring harness?
In many âŁcases you can⤠replace âjust the receptacle kit if the wiring and harness are in good condition. However, if the harness wires orâ insulation show heat damage, charringor brittleness, replace the affected harness or the whole â¤assembly. Always inspect adjacent components and replace any parts that show signs of heat damage to prevent recurrence.
What tools and âtime are typically required to replace âthis âŁreceptacle kit?
Typical tools:â screwdriver set (Phillips/flat),⣠nut driver âor â˘socket set (often 1/4″-5/16″), needleânose pliers,â wire cutters/strippers (if splicing is required)andâ a multimeter for verification. Replacement time varies with access and modelâ but is âcommonly 15-45 minutes for someone comfortable with applianceâ repair. Always disconnect power before starting work.
Is the WB17X5113 an OEM part and are there compatibleâ aftermarket alternatives?
WB17X5113 is â˘an OEM GE⣠part number. There are⤠aftermarket receptacle kits that claim âcompatibility, but OEM parts are ârecommended⣠for fit, heatâresistance ratingsand longâterm reliability. If using an aftermarket kit, âverify electrical ratings (amperage/temperature) and terminal configuration match the original part.
How do I confirm the âŁWB17X5113 is the correct replacement for my GE range model?
Locate⤠your âappliance model number (usually on a tag behind the oven door,â on the frameor⣠on the back of the appliance) and check the âGE parts diagram or a trusted parts⢠retailer for the part crossâreference. The appliance model and the part âdiagram will confirm whether WB17X5113 is the correct receptacle kit for⢠your specific range.
Are there any meaningful safety tips I should follow during installation?
Always disconnect the range from power at âthe circuit breaker before servicing. Wearâ protectiveâ gloves and eye protection, avoid touching live terminalsand do⣠not attempt live measurements unless experienced and insulated. make secure,tight electrical connections and ensure the element plugs fully into the new â¤receptacle. After reassembly, restore power and test âeach burner⤠for correct operation. If you are âunsure atâ any step, â¤hire a qualified appliance technician.
Final Thoughts
The WB17X5113 â¤GE Oven Oven cooktop Burner Receptacle Kit serves as a critical âconnection point between the cooktop burners and the appliance wiring harness, helping to maintain reliable electrical contact, reduce arcing and heat-related damageand preserve overall cooktop performance and safety. As an OEM replacement component, this receptacle kit restores the intended fit and function ofâ the⢠burner assembly and can be an â¤effective â¤solution when loose connections, melted socketsor intermittent burner operation are identified.
Accurate diagnosis and timely replacement of a âworn or damaged receptacle kit are critically important to prevent further electrical issues,â reduce the risk of appliance failureandâ ensure safe operation. It is recommended⢠that diagnosis be performed using â˘appropriate troubleshooting methods and that replacement parts match âthe original⢠specifications; when in doubt, seek⤠service from a⢠qualified technician who can verify the problem, install the correct componentand â¤test the appliance to confirm safe, reliable operation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
