A00099902 Frigidaire Dishwasherâ Door Latch is a door latch assembly used on Frigidaire dishwashers thatâ provides both the mechanical âŁengagement to hold the door closed and the electrical interlock signal required by the appliance control. The component typically consists of a plastic orâ metal catch and actuator combined with one â˘or more microswitches or sensors mounted in a housing,⣠and it â¤interfaces directly with âthe door striker and â˘the⣠machine’s wiring harness.
Within the appliance, the door latch performs two primary functions: it secures the door to maintain a watertight seal during wash cyclesand it provides â¤a reliable âdoor closedâ signal to the control board so pumps, heaters and valves âcan â˘run. âŁThe latch therefore interacts with the door gasket and⢠striker, the electronic control and safety interlock circuitryand indirectly âŁwith hydraulic components⤠that must not operate when the⣠door is âopen. Typical construction, electrical contacts, mechanical tolerancesand environmental exposure (moisture, detergent residueand mechanical wear) are vital technical considerations forâ operation and longevity.
In this article readers will find detailed coverage of the A00099902 latch’s functional role, methods â˘for confirming model compatibility and part identification, common failure symptoms (such as,â inability to âstart a cycle, intermittent stopsor water leaks)and a structured⢠troubleshooting approach addressing both mechanical and electrical causes. The piece willâ also discuss practical replacement considerations-fitment, âconnector types, alignment and adjustment concernsand postâreplacement testing-so technicians, engineers and âinformed appliance owners can evaluate, diagnoseand plan an appropriate repair or replacement strategy.
table of Contents
- Function and Role ofâ the Dishwasher Door Latch Assembly and Interlock Mechanism
- How the A00099902 Frigidaire Dishwasher Door Latch Operates Within the door, Strikeand Control Interlock
- Common Failure Symptomsâ and Stepwise Diagnostic Testsâ for Door âLatch Malfunctions
- Compatibility Matrix, Replacement Considerationsand StepâbyâStep Installation Procedures
- Q&A
- The Way Forward
Function and â¤Role of the Dishwasher Door Latch Assembly and Interlock⤠Mechanism
The primary role of the A00099902 Frigidaireâ Dishwasher Door â˘Latch is to provide â˘a reliable mechanical closure and an electrical interlock that â¤permits wash cycles only when the doorâ is fully secured.â the assembly typically combines a striker-engagement mechanism with one âor more micro-switches (or a single integrated switch) that signal the control board; whenâ engaged the interlock closes the circuit, enabling power to pumps and heating elements while âalso maintaining panel â˘alignment to prevent water leakage. Compatibility⣠considerations include actuator length,mounting hole spacing,and connector type-these mechanical and electrical dimensions must match theâ applianceâ model to ensure proper engagement and safe operation.
In operation the latch behaves as both a position sensor and a safety device: a properly functioning⤠unit will produce âan audible click on closure, show continuity across the switch terminals when⤠latched, â˘and âhold the⣠door under spring or cam tension. Typical failure modes are mechanical wear of the striker or catch, broken plastic tabs that prevent full engagementor failed âswitch contacts that result in intermittent starts or mid-cycle shutdowns. For practical troubleshooting, check for âproper door alignment, verify â¤switch continuity with the door manually latchedand confirm that plug-in connectors match the control harness; replacing âthe part âwith anâ OEM-matched⣠A00099902 ensures mounting and electrical specifications remain consistent with the original design.
- Primary functions: âdoor retention, electricalâ interlockand leak prevention.
- common symptoms of failure: dishwasher won’t start, starts but stopsor door won’t latch securely.
- Compatibility checks: mounting pattern, actuator lengthand connector pinout.
| Item | description |
|---|---|
| Part Number | A00099902 (Frigidaire OEM latch assembly) |
| Function | Mechanical door âŁcatch and electrical interlock/switch |
| Interface | Multi-pin⤠connector to control board; typically low-voltage switch circuit |
| Mounting | Model-specificâ hole spacing and actuator âgeometry; replace with matching âpattern |
How the A00099902 Frigidaire Dishwasher Door Latch operates Within the Door,Strike,and Control Interlock
The A00099902 Frigidaire Dishwasher Door Latch is a â˘combined mechanical and electrical assembly that secures â˘the door to the cabinet strike âand signals the appliance control â˘to⢠allow a cycle to run. Mechanically, â˘the latch engages the strike and draws the door â˘tight against the tubâ gasket⣠so the wash chamber seals; internally it uses a cam or hook and return spring to produce consistent â¤engagement force. Electrically, the âlatch assembly actuates a small switch or plungerâ that⤠completes the door⣠state circuitâ to the âcontrol board (the controlâ interlock), informing the âcontroller that the âdoor is closed and permitting power to the washâ motor â˘andâ valve circuits.Proper operation requires correct alignment with the cabinet strike and a secure wiring connector so the control receives a reliable door-closed signal rather âthan intermittent pulses that âcan abort cycles.
Failures of the latchâ typically manifest as a machine â¤that will not start, stops⤠mid-cycleor leaks if the door does not compress the gasket fully. Practical diagnostic steps include listening for the latch click during door closure, visually confirming strike alignmentand measuring switch continuity with aâ multimeter while operating⣠the latch; â¤a failed electrical contact will show no continuity when the âŁlatch is actuated. Replacement with A00099902 Frigidaire Dishwasher Door Latch is appropriate when mechanical wear (broken cam, weakened spring)â or persistent electrical failure is confirmed, but technicians should confirm model compatibility and check hinge/strike alignmentâ first since a misaligned door can mimic latch failure. Basic on-site checks: ensure the connectorâ is⢠seated, verify⣠the strike âmounting⢠screws are tightand only replaceâ the latch after isolating whether the issue is electrical, mechanicalor⢠due to door sag.
- Primary functions: mechanical engagement with strikeâ and electrical signaling to the control interlock.
- Common symptoms: no-start,â intermittent cycle aborts, audible clickingand water leakage from poor seal.
- Typical tests: visual âalignment check, listen for click, continuity testâ of switch while latching.
- Installation note: verify strike position and harness connection before replacing the latch.
| Item | Description |
|---|---|
| Mechanical element | Cam/hook and return spring that pulls door âŁtight against gasket. |
| Electrical element | Internal switch/plunger that completesâ the door-closed signal âto â¤the control board. |
| Common failure cause | Wear ofâ cam/spring, broken plastic componentsor loss of electrical contact. |
| Test method | Continuity check across switch during actuation and alignment inspection with the strike. |
Common Failure Symptoms and Stepwise Diagnostic Tests for Door Latch Malfunctions
the A00099902 Frigidaire Dishwasher Door Latch is⢠a combined⢠mechanical â¤and electrical assembly that secures the door and provides the door-closed signal to the control board. â˘Mechanically it mustâ hold theâ door âunder wash pressure and maintain proper striker engagement; electrically it normally contains one or more microswitches or a single integrated switch that closes â˘the control circuit when actuated. Common failure modes include plastic fractureâ of the latch body, striker misalignment âthat prevents full actuation, âand switch contact failure (open circuit, high resistanceor intermittent contact). In â˘practical service diagnostics, distinguishing a â˘mechanicalâ binding from an electrical failure directs whether the part or simply an adjustment/striker replacement is required-if â˘the door feels loose or the actuator âdoesâ not produce a distinct click but wiring continuity is present, âthe issue is⤠frequently enough mechanical; if there is no continuity when the âactuator is fully âdepressed, the switch element is suspect.
- dishwasher will notâ start: check for continuity across the latch switch with the door fully closed.
- Starts then stops mid-cycle â˘or reports a â¤door fault: test for⤠intermittent â˘continuity while flexing the latch and harness.
- Door pops open or âsprays water: inspect latch âŁbody and striker alignment; verify mechanical engagement under load.
- No audible click when closing: visually inspect actuator travel and perform a bench actuationâ continuity âtest.
Stepwise â¤diagnostic tests begin with a visual and mechanical inspection for cracked plastics, missing springsor bent striker plates, followed by electrical tests: disconnect power, unplug the latch harnessand measure continuity across the switch terminals while manually actuating the latch-closed switch should â¤read low⢠ohms near zero and open should be an open circuit. With⤠power applied and appropriate safety precautions,⤠verify the control-board feed voltage at the harness⢠during a start sequence to confirm the control is commanding the latch circuit; absence of⣠control voltage shifts the fault to wiring or the controller rather than the latch itself. For compatibility checks, confirm that replacement latches match the⤠original part ânumber and connector pinout; when uncertain, a âbench swap with aâ known-good A00099902 unit â˘(or inspection of mating connector pin assignments) is the moast reliable confirmation that the latch is the failed component.
| Item | Description |
|---|---|
| part | A00099902 Frigidaire Dishwasher Door Latch – integrated mechanical â˘latch and switch assembly |
| Primary function | Secure door under pressure and provideâ a âŁclosed-door electrical signal to the control board |
| Diagnostic tip | Measure continuity across switch terminals during manual actuation; inspect for âŁcracks, misalignment,â and harness corrosion |
Compatibility Matrix, Replacement Considerationsand StepâbyâStep Installation Procedures
The âŁA00099902 Frigidaire Dishwasher Door Latch serves as both a mechanical retention⤠device and an electrical interlock: its plastic/metal latch⤠engages the⤠door strikeâ to compress the gasket and its internal switch signals the control board that the door is closed. Compatibility depends on matching the⣠latch housing footprint, actuator orientationand electrical connector/pinout to the appliance harness; technicians should verify the appliance model number and compare mounting hole spacing,â actuator lengthand whether the âlatch includes an integrated microswitch or uses a⢠separate switch assembly. Functionally, a âproperly matched latch âŁprevents door movement during high-pressure spray, completes the door-closed circuit so the control permits â˘heating and motor operationand maintains seal compression; symptoms of an âincompatible or failing latch â˘include âdoor ajarâ error codes, inability âto start cyclesor localized leaking⣠at the top of the door seal.
Replacement considerations focus on mechanical fit and electrical continuity: inspect whether the existing unit is fastened with screws or snap clips, whether the strike piece must be transferredand confirm the connector type and switch wiring before ordering A00099902 orâ an option. Installation follows a predictable sequence that minimizes damage⣠to the inner door panel and wiring harness – remove power, access the interior door panel, document or label â˘connector orientation, swap the latch while ensuring the actuator engages the strike at âŁthe same depth and angleand test the interlock with both a⤠continuity check and a dry run cycle. Typical practical⤠steps include verifying that the latchâ compresses the gasket by the same amount as the original and confirming control-board input â(closed = continuity) âbefore final reassembly.
- Safety first: disconnect power at the breaker and turn off the waterâ supply before starting.
- Remove inner door panel fasteners and carefully peel back to expose latch â˘and wiring harness.
- Label and disconnect electrical⤠connector, remove fastenersand extract old latch; transfer any strike or bracket if required.
- Install new latch⤠so the⤠actuator aligns with the strike; secure fasteners,reconnect wiring,and restore power.
- Verify continuity across the latch switch when closed and perform a short test cycle to confirm âŁsealing and interlock operation.
| Item | Description |
|---|---|
| Part | A00099902 Frigidaire Dishwasher â˘Door Latch – mechanical catch with integrated interlock switch (verify fitment). |
| Function | Provides âdoor retention, gasket compressionand closed-door signal to theâ control board. |
| Mounting | Commonly screw-mounted to inner door panel; check hole spacing and actuator orientation before replacement. |
| Connector | Typically a small 2-3 pin swift-disconnect; confirm pinout â˘and switch continuity prior to final âassembly. |
Q&A
What is the âA00099902 part and whatâ does it do on⤠a Frigidaire⣠dishwasher?
A00099902 is a replacement⤠door latch/lockâ assembly used onâ many Frigidaire dishwashers. The latch secures the door during operation and actuates the door-switch or lock mechanism soâ the⢠control will start and run cycles. If âŁthe latch fails the dishwasher usually won’t start, pauses⣠mid-cycleor may report a door or lock fault.
How do Iâ know if the latch (A00099902) is the cause of my dishwasher problem?
Common symptoms of a â¤bad latch include: dishwasher won’t start and â¤shows a door/lock error,the door âŁwon’t stay closed,cycles stop or⢠won’t complete,or you hear the door switch not clicking when âŁclosing. Visually inspect for broken plastic, a loose catchor a misaligned strike. You can also test the electrical switch inside the latch with⣠a multimeter for âcontinuity when the door isâ latched-if âthe switch does⢠not change state, the latch assembly is likely faulty.
How do I test the door latch assembly electrically?
First disconnect power to the dishwasher.Removeâ the inner door panel to access the latch. With a multimeter set to continuity or ohms, probe the latch switch terminals and operate⢠the latch manually. The meter should show continuity (or a change) when the âlatch is actuated and open when released.If there is no change, the internal switch is defective. Always consult yourâ model’s wiring⤠diagram for correct terminals.
Can I install A00099902 myself,and what tools are required?
Yes,a competent DIYer or technician can replace it. Basic tools: âscrewdriver or nut driver set (usuallyâ Phillips or 1/4″ âhex), needle-nose pliersand âŁaâ multimeter for testing. steps: disconnect electrical power,open â¤theâ dishwasher door and remove the inner door panel screws,disconnect the wiring harness from the old latch,removeâ mounting screws,fit the⣠new latch,reconnect the harness,reassemble theâ door,restore âŁpowerâ and test. Followâ model-specific instructions; if you’re unsure, hire aâ technician.
Do I âŁneed to disconnect the water supply before replacing the latch?
No-replacing the door latch is an âelectrical/door-panel procedure and typically does not require shutting off the water. However, you â˘must disconnect⤠electrical power at the breakerâ or⤠unplug the appliance before starting work for safety.
Is A00099902 an OEM part and are⢠there compatible âalternatives or superseded part numbers?
A00099902 is sold as a replacement part for Frigidaire dishwashers â˘(OEM or aftermarket may be⣠available). Compatibility depends on your dishwasher model-check the model numberâ and crossâreference with the parts list or retailer. Aftermarket equivalents exist,but for guaranteed fit and function choose the OEM or a reputable replacement that specifically â˘lists â˘your model number.
How much does the⣠A00099902 latch typicallyâ cost and how long does replacement take?
Retail price for the part generally ranges from about $20 to $60 depending on âŁsource and whether it’s OEM or aftermarket. Installation timeâ for someone pleasant with appliance repairâ is typically 20-45 minutes. Ifâ a technician is hired, labour will⤠add to the cost.
what should I check if I replace the latchâ but the dishwasher still reports aâ door/lock error?
If the error persists after â¤installing a known-good latch, check the âwiring harness and connector â¤for⢠corrosion or damage, verify the latch isâ correctly aligned with the strikeand ensure⣠the door closesâ fully and latches mechanically. Also testâ the control board inputs⢠for the door switch (with power âoff, inspect for damaged connectors)⢠and consult error code diagnostics âin your model’s service manual. If wiring and⢠alignment are good, the control board or a related sensor might be at âfault.
The⢠way Forward
The A00099902 Frigidaire Dishwasher Door Latch plays a central role in⤠the appliance’s safe and reliable operation by securing âthe door âŁduring wash cycles, maintaining a watertight sealand signaling the control system that the dishwasher is ready âto run. A properly functioning latch helps prevent leaks, ensures that cycles start and complete correctly,⤠and supports user safety by preventing accidental opening while the unit is in operation.
Because latch symptoms can mimic other âissues, âaccurate diagnosis is essential to determine whether⣠repair or replacement â¤of the A00099902 Frigidaire Dishwasher Door Latch is required.â Confirming compatibility with the specific model, âinspecting mechanical and electrical componentsand testing function before replacingâ the part reduces unnecessary â¤expense and downtime.â When replacement is necesary, using the correct part and following manufacturer âinstructions âor engaging a qualified technician will âŁhelp restore reliableâ performance and preserve appliance safety and longevity.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
