The 241734001 Frigidaire Refrigerator Ice Bucket is an āOEM ice storage and dispensing ā£bin designed for use in compatible Frigidaire ā£refrigerator models. It is a ā£moldedā¤ plastic component that collects and storesā¤ ice produced by theā£ refrigerator’s automatic ice ā£maker andā¤ provides theā¢ physical interfaceā for auger orā paddle dispensing mechanisms and associated sensors.
Insideā the appliance the ā¤ice bucket serves as the intermediary betweenā£ the ā¢ice maker’s harvestā¢ cycle and the user-accessible ā¢dispenser orā¤ internal storage āarea. it receives ice during the harvest, guides and supportsā the ice so an auger or paddle canā¤ move it ātoward a chuteand ā¤typically ā¤aligns with mechanical or optical sensors ā£and the ādispenser actuator. Proper seating, intact mounting tabsā and unobstructed internal geometry are essential for reliableā interaction ā¤withā the ice maker, auger āmotor, dispenserā¢ chuteā¤ andā sensor assemblies; damage, misalignment or ice bridging in the bucket commonly causes ādispensing failures, jams or incorrect sensor readings.
This ā¤article will cover the ā¢ice bucket’s ā¤functionalā¢ design and commonā compatibility considerations, describe ātypical āfailure symptoms (suchā as, no ādispense, āauger stalls, excess noise, ice bridging or leaks)and present practical troubleshootingā£ steps a technician or āappliance owner can use āto isolateā¤ bucket-related ā£problems. It āwill also outline ā¤replacement āconsiderationsā¤ includingā¤ confirmingā¢ OEM part numbers, inspectingā£ mounting features andā£ wear pointsand safety precautionsā to observe (power and water isolation) when removing and installing theā£ bucket.
Table of Contents
- Functionā¤ and ā¢Mechanical Role of theā¢ Refrigerator Ice Storage and Dispensingā Assembly
- How the 241734001 ā£Frigidaire Refrigerator Ice Bucket Integrates with the Ice Maker, Augerand Door Dispenser Mechanisms
- Common Failureā£ Symptoms, ā¢Wear Patternsand Diagnostic ā¢Indicators ā£for the Ice ā¤Bucket Assembly
- Compatibility Matrix, ā¢Replacement Procedures, ā¤and Installation āBest āpractices for the 241734001 āIce Bucket
- Q&A
- Future Outlook
Function and āMechanical Role ā¢of the Refrigeratorā£ Ice āStorage and Dispensing Assembly
The 241734001 Frigidaire Refrigeratorā Ice Bucket functions as the ā¤receptacleā and mechanical interface between the refrigerator’s iceā¢ maker andā the external dispenser. it receives ā¤ice from āthe ejector arm,ā£ stores a āmeasuredā volumeā to preventā¤ overfillingand provides theā¤ auger orā agitatorā£ mounting that meters ice into theā dispenser chute. The bucket’s geometry, material stiffnessand the location of its mounting tabs determine how reliably theā auger ā¢couples withā£ the motor drive andā£ how sensors interpret “bin full”ā or “ice present” conditions;ā£ smallā distortions or incorrect āorientationā can causeā¤ jamming, āfalse sensor readingsor accelerated wear of ā¢the ā¢auger fins during dispensing. In field service,technicians ācommonly āreplace the bucket when persistent bridging,noisy dispensing,or misalignment ā¢symptomsā persist afterā¤ confirming theā motor and ā£sensor operation.
mechanically, the ice bucketā¤ serves āthreeā¢ roles: structural support forā the auger assembly, a low-friction containment surface toā£ reduce ice adhesion, ā¢and asā£ the referenceā forā opticalā or mechanical level sensors. Compatibility is governed byā£ the snap-fit ālocations, auger shaft diameter and keyingand clearance at the dispenser doorā¤ – replacements must match these interfaces within millimeterā tolerances. āTroubleshooting steps include verifyingā that the ābucket’sā¢ drive socket ā¢engages āthe auger drive fully, ācheckingā¢ that theā bin lip seats against the freezer ā¢liner without sideā¢ loading, ā£and inspecting for cracks or deformation that alterā auger alignment.ā¢ Routineā¢ maintenance such as defrosting tightly packed ice,ā£ inspecting the drive socket ā¢for wearand ensuring āthe ā¢bucket isā¢ seated correctly ā£will ā¢preserve dispenserā¢ torque ā¤requirements andā reduce false “no ice” or jamā conditions.
- Primary features: auger drive socket, snap-fit mounting ā£tabs, removable lid/cover interface.
- Common symptoms of failure: augerā£ slipping, ice ābridging, noisy dispensing, āand ā¤sensor misreads.
- Service checks: drive engagement, tabā alignment, absence of cracks,ā£ and ācorrect seatingā¢ inā theā liner.
| Item | Description |
|---|---|
| Part number | 241734001 Frigidaire Refrigerator Iceā£ Bucket |
| Material | Rigid thermoplastic (ABSā or equivalent)ā designed ā¢for low-temperature impact resistance |
| Mounting | Snap-fit tabs and keyed āauger socket – must match fridge ice maker interface |
| Service note | Verify āmechanicalā¤ fitā£ and ā¤sensor alignment before replacingā other dispenser components |
How the 241734001 ā¢Frigidaire Refrigerator Ice Bucket āIntegrates with the Ice ā¤Maker, Auger, ā¤and Door Dispenserā¤ Mechanisms
Theā 241734001 Frigidaire āRefrigerator Ice Bucket functions as the intermediaryā¢ storage and feedā£ component between the āiceā£ maker head andā the dispenser/auger ā£assembly. It ā¢seats into the freezer compartment with keyed tabs andā¤ a ā¤splined hub that engagesā¢ the auger drive;ā correct orientationā of thoseā¢ tabs and āthe toothā profile on theā¤ hub ensures torque transfer fromā the auger motor toā move iceā£ toward theā¢ door chute. ā¤A presence notch āor actuator onā¢ the bucket also aligns with the ā¢refrigerator’s interlock or sensor soā¤ theā¤ dispenser system recognizes when ā£the bucket ā£is installed. āIn models that ā¤use a paddle or āauger integrated into ā¢the bucket,theā bucket’s internal geometry channels ice towardā£ theā auger flighting andā helps reduceā¢ bridging by ā£promoting a ā¢consistent feed path into the door dispenser.
Technicians commonly āevaluate three interactionā points when diagnosing dispenser issues: mechanical engagement at ā¢the splined hub,alignment of the bucket tabs with the housing,and activation ofā£ the bucket presence āsensor. Symptoms suchā¤ as ā£slipping under load, ā¢grinding noise, ā£intermittent dispensingor the dispenser refusing to run often traceā¢ to worn splines, broken tabsor a misaligned presence āactuator rather than the ice maker ā£itself. Replacing the bucketā¤ can ā£correct feed-path wearā or damaged mounting features, but interoperability requires āthe replacement ābucket to match the originalā hub profile and sensorā notch; if ā£theā auger ā¢motor or switch is faulty, replacing ā£the bucketā¤ alone will ānot resolve the āfailure.
- Key features: keyed ā¤tabs, splinedā hub, presence notch/actuator, internal feed geometry
- Common āfailureā£ modes: spline wear, tab breakage, sensor misalignment, ice bridging
- Diagnostic focus: visual spline/tabā£ inspection, manual ā¢engagement test, sensor continuity āor switch ā¢operation
| Item | Description |
|---|---|
| Part | 241734001 āFrigidaire Refrigerator Iceā Bucket – ā£storage andā feed interface |
| Mount interface | keyedā tabs and āsplined hub thatā mates āto auger drive; orientation critical for engagement |
| Compatibleā¢ mechanisms | Frigidaire auger-driven door dispensersā and ice maker assemblies that useā£ matching āsplineā¤ profiles and presence actuators |
| Commonā¤ symptoms when ā¢faulty | Grinding or āslipping during dispense, no dispense ā£dueā¤ to sensorā£ non-detection,ā¤ ice bridging inside bucket |
Common Failure āSymptoms, Wear ā£Patternsand diagnostic Indicators forā the ice Bucketā¤ Assembly
The 241734001 Frigidaire Refrigerator Ice āBucket isā a molded ā¤receptacle that interfaces with theā¢ ice maker’s āauger/drive ā¤assembly and dispenser door; its primary functions areā to store producedā£ ice, present consistent āfeedā¢ to the augerand provide the mechanical interface for the dispenser motor and sensor flags. Failures typically originate at the mechanical interfaces-worn ādrive splines, misshapenā mounting hooks, ā¢or deformation of ā¢the ābucketā¢ lip-that cause ice ā¤bridging, binding against theā housing, āor loss ā¢of āpositive engagement āwith the auger. ā¢Compatibility mismatchesā (incorrect bucketā geometry or ā¤offset sensor ā¢flag)ā will produce intermittent dispensing and increased ā¤wear ā¢on both theā bucket and the drive motor, so techniciansā¢ shouldā verify fitment against the refrigerator model when replacing parts.
- Ice bridging āor large clumpsā£ that prevent auger rotation
- Scraping or grindingā¤ noises during dispense indicating spline orā auger wear
- Intermittent or no dispense āwhile ice maker continues to produce cubes
- Visible cracking, ā£deformationor abrasion at the lip, ribs, āor drive interface
- Water pooling in the bin āor ā£around the dispenser area āfromā¤ cracks or seal failure
Diagnosis begins with a ā¤visualā¢ and manual inspection: check for lateral play at ātheā£ augerā spline, verify the bucketā£ seats flush in āits cradle, ā£and ārotate the auger by hand to feel for binding or ā¤grit. Electrical ā£and sensor checks include confirming the dispenser switch/sensor flag actuates āand that the drive motorā£ is notā drawing excessive ā¤current under load; elevated ā£motor ā¢current with reduced torque generally indicates slippage at the bucketā¢ spline or aā partiallyā£ frozen mass inside the ābin.ā Practicalā¢ examples: aā chatty grinding noise plus slipping auger typically pointsā¤ toā a stripped spline, whereas āintermittent dispense with no noise often implicates a misaligned bucket or damaged sensor flag thatā fails to signal the motorā¢ toā run.
| Item | Description |
|---|---|
| Drive spline wear | Rounded or strippedā¤ teethā¤ cause slippage, grinding noiseand reduced dispense torque |
| Bucket crack/deformation | Leaks, water poolingandā¤ ice loss from structural ā£failure of the bin |
| Sensor flag damage | Intermittent ādispenser āactivation or failure to start āthe auger motor |
Compatibility Matrix, āreplacement Procedures,ā and Installationā Best Practices for the 241734001 āIce Bucket
The 241734001 Frigidaire Refrigerator Ice Bucket ā¢functions as the primary ice storage and delivery interface between the ice makerā¤ assembly and the dispenser mechanism. Compatibility depends on mechanical mounting points (boss locations and ā¤snapāfit tabs), the presence and orientationā£ of āa sensor flag orā optical interrupter ā£taband the internal geometry thatā controls ice flowā¤ and auger access.ā Technicians should verify part-fit by comparing boss spacing, latch slot dimensionsand sensor tab position rather than ā£relying only ā¢on model numbers; when these three dimensional features match, the bucket willā¤ behave correctly with the existing ice maker and dispenser components. Practical verification can include measuring the bucket width and tab offsets ā¤and confirming the sensor flag passes cleanly through any interrupter slot ā¤during manual ā¤rotation or insertion tests.
Replacement and installationā prioritize ā£correct alignment, clean mating surfaces, āand verifying sensor operationā¢ before āreturning the refrigerator ā£toā service.ā Removeā the old bucket by supporting its weight,releasing anyā latchā or stop,and inspecting the ice makerā housing for worn guides or broken tabs; replace any damaged guides to avoid repeated failures.After āseating the newā bucket,ā£ confirm the ā£ sensor ā£flag orientation ā and that the bucket rotates or slides without binding; āperform at least one dispenseā¤ cycle and observe that the anti-jam features and ā£ice sensors behave ā£as expected. For routine troubleshooting and a standard replacement workflow, follow the checklist ābelowā to minimize ā£rework and ensure reliable operation.
- Support and remove: brace bucket, release ālatch, slide āout to avoid dropping ice onto components.
- Inspectā mating features: check boss ā¢spacing, snapā£ tabsand sensor flag for wear or damage.
- Clean contact areas: remove residual ice or āscaleā¢ from housing andā¤ bucket seat.
- seatā¤ and ātest: alignā tabs,ā insert fully, verifyā£ sensorā activation and ā¤performā a dispense/test cycle.
| Item | Description |
|---|---|
| Mounting ā£bosses | Critical mating points; must match spacing andā diameter to prevent lateral play. |
| Sensor flag | Tabā£ or āfinā¢ that triggers optical or magnetic ā¤sensors;ā£ orientation affects fill and dispense ā¤logic. |
| Latch/stop | Retention feature preventing unintentional bucket ejection; ā¤inspect for cracks. |
Q&A
What isā part 241734001 āfor Frigidaire refrigerators?
Part 241734001 is the replacement āice bucket/ice bin usedā¤ to collect andā¤ store ice produced byā¤ the refrigerator’s ice maker. It is an OEM Frigidaireā¤ service part; exact model compatibility varies,ā so alwaysā¢ verify theā part number againstā¢ your ārefrigerator modelā number or theā¤ Frigidaire parts lookup before purchasing.
How do I removeā¤ and āreinstall the 241734001 ice bucket?
General removal:ā¢ open ā¤the āfreezer ā¤or dispenser compartment, empty the bucket āof ice, āthen slide the bin forward and tilt the front up to clear the mounting rails and lift it out. Reinstall by aligning the bucket with āthe guide rails, ā¢slidingā it back until it seats,ā and securing any retaining clips ā£orā£ brackets. Refer to your refrigerator’s service ā¢manual for ā£modelāspecific clips or screws and, if doing more than simple removal,ā disconnect powerā¤ first āfor safety.
My ice maker fills the bucket but the ādispenser won’t deliver ice. Couldā¢ the 241734001 be theā£ problem?
Possibly, but more likely causes areā a ājammed ice chute, an icedāover dispenser auger, misalignment of the bucket,ā¤ orā a ā¢faultyā£ auger ā¤motor ā¢or sensor. Check that the bucket isā¢ fully seated, empty it āand look for stuck or fused ice, ā¤and ensureā the āauger andā¢ chute are clear. If theā bucket’s mounting tabs orā£ auger interface are broken, the auger mayā£ not engage properlyā¤ and the bucket should ā¢be replaced.
How should I clean theā 241734001 ice bucket?
Empty all ice, wash ā¢the bucket in ā¢warm ā¤water with a mild ādish soap, rinse thoroughlyand ā¢air dry completelyā before returning it to service.Avoid ā¤abrasive scrubbers,ā harshā solvents or āalkaline ācleaners.ā Follow any cleaning instructions in the ārefrigerator manual; when inā doubt, hand washingā is the ā£safest methodā£ toā avoidā¤ warpingā£ or damage.
Is theā£ 241734001 ice ābucket dishwasherā safe?
Dishwasher safety depends on theā specific plastic formulation andā manufacturer guidance.Many ice buckets ā¢are not recommended āfor dishwashers because high āheat can warp the plastic. Unlessā¤ the product documentation explicitly states ā¤it is indeed dishwasher safe, hand wash to avoid damage.
How can āI tell if my 241734001 ice bucket needs ā¢replacing?
Replace the ābucket āif āyouā£ see cracks or holes causing leaks, warped or broken mountingā tabs ā£that prevent proper seating, excessiveā frost buildup thatā won’t clearor persistent clumping/contamination āof iceā¢ despite cleaning. Also replace ifā the ā¤area where theā£ auger or actuator engages is worn or broken so the ādispenser cannot ā¢functionā¢ correctly.
Where canā I buy a genuine 241734001 ā¤replacement and how do I verify it’s OEM?
Buy from āFrigidaire’s ā£official parts website, authorized dealersor reputable applianceā parts distributors.verify OEM status by matchingā¤ the part number (241734001) to the appliance parts diagram for yourā¤ refrigerator āmodel,checking for Frigidaire branding orā£ packaging,and confirming a seller’s authorization or return policy. crossāreference with theā£ appliance model number to ensure compatibility.
Does the 241734001 iceā¤ bucket include the lid, augeror dispenser components?
That varies ā£byā¢ listing.ā Someā£ part sales include ā¤just the plastic bin, while others may include a lid or additional components.ā¤ The āauger, motor, ā¤sensors,ā and mounting brackets are typically ā£sold separately. Always read the product description orā consultā¤ the parts diagram for your specific model to confirm whichā¤ components ā£are included.
Future Outlook
The 241734001ā¢ Frigidaire refrigerator ice bucket serves a straightforward but essential role inā¤ household ā¤refrigeration: ā¢it āstores andā facilitates the dispensing of āproduced ice while helping toā maintainā£ hygiene and efficient ā£operationā of the ice-makingā system. ā¤properly functioning iceā¤ buckets ensure that ice is contained, accessible, āandā£ protected from cross-contamination āand mechanical interferenceā thatā can ā¤affect the ice maker’s overall performance.
Given its role,routine inspection ā¤for wear,cracks,improper fitting,or signs ā¤of ice accumulation and jamming is critically important. Accurate diagnosis-confirming model compatibility,assessing ice-maker operation,and isolating whether issues stem from theā¢ bucket,theā dispenser āmechanism,orā other components-prevents unnecessary repairs andā ensures targeted corrective action.
When inspectionā indicates damageā£ or persistent functional problems, timely replacementā¢ of the 241734001 ice bucket with theā¢ correct,ā compatible component restores proper operation,ā¤ preservesā£ food safety, ā£and helps avoid secondary damage toā£ the ice-making and dispensingā systems. For complex failures or uncertainty about diagnosis and installation,ā professional ā¢service can reduce risk and ensure ā£theā¢ repair is completed safely and effectively.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
