WB17X5113 GE Oven Oven Cooktop Burner Receptacle kit is a receptacle-style electrical connector assembly used on GE⢠residential ovens and cooktopsâ to provide a reliable interface âbetween the appliance wiring harness and the surface orâ broil heating element. The kit typically comprises the insulated connector housing and mating â¤terminals or rapid-disconnect fittings âŁdesigned to fit the element⢠spade terminals and⢠to withstand the thermal and electrical demands present at the cooktop or oven cavity.
Functionally, the receptacleâ kit serves as a mechanical âand electrical junction that âtransfers mains voltage from the appliance âharness and control circuitry to the heatingâ element while âmaintaining dielectric isolation â¤and resistance to high temperatures. It interfaces with the element terminals, the terminal block or harnessand âupstream control devices â¤such as infinite switches or relays; âa secure, low-resistance connection at this point is essential to consistent⤠element operation andâ to minimizing arcing, localized âheatingand connector degradation over⤠time.
In⤠this article âreaders will find a focused technical⤠treatment of the WB17X5113 kit covering⤠its intended function and where âŁit is typically installed,guidance on compatibility and fitment considerations,common failure symptoms (such as â¤intermittent heating,discoloration,visible melting,arcing âmarks,orâ open circuits),and â˘systematic troubleshooting approaches âŁuseful to âŁtechnicians and appliance owners.The âŁarticle also addresses practical replacement considerations – matching part numbers âŁand connectorâ styles, attention to insulation and⣠temperature ratingsand verification checks âŁto âperform after replacement – with safety and appliance⤠reliability as the priority.
Table âof Contents
- Function and Role⣠of the Cooktop Burner Receptacleâ within the Oven’s Electrical âand Ignition Systems
- How the WB17X5113 GE Oven Oven Cooktop Burnerâ Receptacle Kit Works Inside the Appliance
- Common⣠Failure Symptoms: âIntermittent Ignition, No spark, Overheating,⤠and Electrical Arcing
- Compatibility and Supported GE oven Models for WB17X5113⤠Receptacle Replacement
- Replacement Considerations andâ Installation: Connector Orientation, Wire Gaugeand Safety Lockouts
- Troubleshootingâ and Diagnostics: Multimeter⣠Tests, Continuity Checksand Stepwise â˘Fault Isolation
- Q&A
- In Summary
Function and Role of the cooktop Burner Receptacle within the Oven’s Electrical and â¤Ignition Systems
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle âKit serves as the electrical and âmechanical interface between the oven’s wiring harness â˘and the cooktop burner electrode assembly. Designed â˘to accept the ignition electrode and provide the necessary contact for the spark generator and⤠safety interlocks, theâ receptacle routes high-voltage ignition pulses⣠from the spark module while providing insulation and a secure mechanical mount to resist vibration⢠and heat. In practice, the part replaces worn or damaged receptacles that produce poor contact, arcingorâ carbon tracking;⢠compatibility should be verified âby matching connectorâ shape, terminal countandâ mounting holes to â˘the oven model and harness layout before installation.
Functionally, the receptacle âcarries the â˘low-current, â¤high-voltage pulses used to ionize the gap at the burner tip while also providing the return/ground path and any sensorâ or switch connections required by âŁthe⣠control âŁsystem. Common â˘failure modes include corrosion âŁatâ terminals, cracked ceramic or plastic insulationand loose crimped leads, each of which can cause âintermittent⤠ignition, continuous⤠sparkingor complete loss of spark. For diagnosis, visually inspect for burn marksâ or black tracking,⤠check for secure terminalsand perform continuity checks âon â˘low-voltage circuits; always⣠disconnect power before testing or replacement.Correct replacement and proper seating of the WB17X5113 kit restore reliable ignition performance and proper electrical isolation between⢠high-voltage and low-voltage conductors.
- Features: â¤insulated high-voltage terminal, keyed connector for proper âŁorientation, mounting flange for secure attachment.
- Symptoms of failure: no spark at burner, âpersistent sparking between receptacle andâ chassis, intermittent ignition, visibleâ carbon âŁtracking.
- Basic inspection steps: disconnect power, inspect insulation and terminals, verify continuity and secure crimps, replace if any damage is present.
| Item | Description |
|---|---|
| Electrical Role | Provides connection for spark generator output and return/ground paths while isolating high- and low-voltage circuits. |
| Mechanical Role | Secures the electrode assembly in position and maintains alignment with the burner port under⣠thermal cycling. |
| Service Test | Visual inspection forâ tracking, terminal continuity for low-voltage â˘leadsand secure fit of plug-style âŁconnectors. |
How the WB17X5113 GE Oven Oven Cooktop⣠Burner⤠Receptacle Kit Works Inside the appliance
The WB17X5113 GE Oven Oven â¤Cooktop Burner Receptacle Kit âis a service-replaceable electrical connector assembly that provides the mechanical and electrical interface â˘between a cooktop surface element â¤and the range wiring or control switch.functionally it holds the element spade terminal(s) in place with insulated housings,provides strain relief and⣠a secure chassis mount,and preserves terminal alignment so resistance heating elements receive full voltage.inâ practice this part carries the âelement current and must âmatch the original âterminalâ spacing, pole count and wire gauge to avoid poor contact, overheatingor⤠incorrect element switching.
Technicians commonly diagnoseâ receptacle failures by measuring âcontinuity through the connector, visually inspecting for melted insulation or burned terminals, â¤and checking for loose âretention âŁtabs that allow intermittent contact. Typical replacement procedure includes de-energizing the appliance, removing âthe cooktop access, noting â¤wire positions, swapping theâ receptacleand verifying operation under load;⤠this kit is⢠compatible only when terminal layout âand mounting points match âŁthe original component. Common symptoms pointing to a failed receptacle are one burner that does not heat â¤while others work, visible discoloration at the terminalor elevated contact resistance measured with a multimeter.
- Features: multiple insulated spade terminals, chassis mounting tab, short pigtail âleads orâ direct spade âcontacts âdepending onâ model.
- symptoms indicating replacement: open circuit on continuity âcheck, burned/melted housing, intermittent heating â¤under load.
- Installation note: match terminal configuration and wire gauge; verify secure retention of â˘eachâ spadeâ to prevent arcing.
| Item | Description |
|---|---|
| Terminals | Insulatedâ spade contacts arranged to match original cooktop element and switch wiring. |
| Material | High-temperature insulating housing with brass or⤠plated âŁmetal contact elements for conductivity and thermal resistance. |
| Function | Provide⢠stable, low-resistance connection and âmechanical support between element leads and appliance wiring. |
Common Failureâ Symptoms: Intermittent Ignition, No Spark, Overheatingand Electrical Arcing
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is the electrical interface âŁthat connects the oven or cooktop spark igniter/electrode assembly to the âappliance wiring harness. When the receptacle suffers insulation breakdown, loose or corroded⤠female terminalsor heat-induced deformation, the ignition circuit can behave intermittently: the control will click but the electrode will only⤠spark âsporadically or not⢠at all. Mechanical stress âŁfrom repeated thermal cycling and nearby â˘burner heat âcommonly causes cracked housings and âcarbon tracking, which in turn produce visible arcing or localized overheating â¤at the connector rather of delivering⢠a clean low-resistance path to the igniter.
Technicians diagnose these failures âby visual inspectionâ and electrical checks: look for melted plastic,â green/black corrosionand measure continuity between the harness pin and the electrode lead with a multimeterâ (expect low ohms continuity in a healthy circuit). Replace the receptacle with the correct WB17X5113 kit or âŁan equivalent⤠specified for the model to restore proper connector geometry, terminal tensionand insulation; incorrect connector fit or poor⣠routing âcan recreate arcing and heat buildup even âŁafter repair. For practical repair workflow,isolate power,verify control pulses to the harness,confirm continuity to the electrode while operating the spark sequence,then⤠replace the â˘receptacle if resistance jumps,terminals areâ loose,orâ physical damage is present.
- Intermittent ignition: spark occurs sporadically or only when connector is moved.
- No spark: control clicks but⣠no spark at the electrode despiteâ correct control signals.
- Electrical arcing: visible sparks or burn marks at the connector instead of at the electrode tip.
- Local âoverheating/melted housing:⣠heat damage⤠around the receptacle or⤠adjacent wiring.
| Item | Description |
|---|---|
| Typical continuity | Low ohms betweenâ harness pin âand electrode lead; open or high â˘resistance indicates failure |
| Common failure⤠mode | Insulation cracking, terminal looseness, carbon tracking and corrosion |
| Compatibility note | Replace with WB17X5113 or exact OEM equivalent to match terminal shape, spacingand heat-rated materials |
Compatibility andâ Supported GE Oven Models⢠for WB17X5113 Receptacle Replacement
The WB17X5113 GE Oven oven âŁCooktop Burner âReceptacle Kit is aâ direct-replacement electricalâ receptacle assembly that provides the mechanical mounting and insulated electrical connection between⤠the appliance wiring harnessâ and the cooktop burner elements. The part is intended to accept standard male spade terminals, align with the oven’s mounting bossesand maintainâ separation between live conductors under operating temperatures. Technically, the receptacle’s role is to secure the conductive paths and prevent arcing or loosening at the contact points; the correct fit requires matching terminal type, spacingand mounting pattern to the original equipment assembly.
Compatibility depends on three â¤measurable factors: terminal⤠style (spade size and orientation), the number of circuits terminated at the receptacleand the physical mounting âŁhole spacing and panel profile. Before installing the WB17X5113 kit, verify compatibility by comparing theâ old receptacle’s terminal layout â¤and⤠mounting dimensions;â common checks are shown below. For practical context, this kitâ is âŁcommonly âinterchangeable âamong GE electric ranges and built-in ovens that use the same spade-terminal layout and mounting pattern, but not all GE models share identical assemblies-confirm with the appliance’s service âmanual or parts diagram.
- Compare⢠terminal type and orientationâ (e.g., 1/4″⣠male⤠spade, inline⤠vs. staggered)
- Measure center-to-center mounting hole⢠spacing and panel thickness
- Confirm the number of circuits/terminals and harness lead lengths âmatch
| Item | Description |
|---|---|
| Terminal type | Accepts standard 1/4″ (6.35 mm) male spade⣠terminals commonly used âon GE ovens |
| Number âŁof terminals | Varies by⣠model; â¤confirm same count and circuit topology as original |
| Mounting | Panel-mount with âŁspecific hole spacing-measure before purchase |
| Function | Provides insulated, mechanically⣠secure connection for cooktop burners |
Replacement Considerations and Installation: Connector âOrientation, Wire Gaugeand Safety Lockouts
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit replaces the molded receptacle âassemblies that connect individual burner leads to the âŁoven harnessand â¤proper connector orientation is critical for⣠reliable contact and safe operation. The molded housings â¤are keyed⣠and often âŁinclude a locking tang; â¤during installation â˘the flat face of the female contact must fully engage the mating male tab untill â¤the lock âclicks toâ avoid partial contact or arcing. Match the kit to the appliance harness by checking mating tab âprofile and polarizing âŁfeatures-using a receptacle with different tab â¤spacing orâ orientation can changeâ circuit routing orâ leave a conductor exposed, so verify physical compatibility before assembling or soldering any changes to the wiringâ harness.
- Verify âpower is disconnected at the â˘breaker before touching receptacles or wires.
- Confirm wire gauge and insulation type match the original harness⤠and appliance â˘rating.
- Seat connectors until the locking tang engages and⣠secure with a strain relief or clamp.
- Inspect â¤for exposed conductor and provide insulating boots on high-temperature runs.
| Item | Description |
|---|---|
| Wire gauge guidance | High-current burner leads typically â˘retain the â˘same gauge as the originalâ (commonly in the 12-14 AWG range for mains power); sensor and control âŁleads are smaller (often⤠18-22⣠AWG). |
Practical installation practice includes routing the harness clear of hotâ surfaces and sharp edges, using the kit’s locking features to prevent vibration⤠looseningand restoring power only after continuity and insulation checks. Ifâ the receptacle must beâ replaced with a different style,maintain tab polarity and ampacity ratings; when in doubt,document theâ original terminal positions and use a â˘multimeter to confirm continuity and correct âcircuit behavior before final reassembly or return to service.
troubleshooting and Diagnostics: Multimeter Tests, âContinuity Checksand stepwise Fault Isolation
The WB17X5113 GE Oven Oven Cooktop Burner receptacle Kitâ is a replacement connector assembly that provides the mechanical and electrical interface between the cooktop heating element and the appliance wiring harness.⤠It⢠does not contain active⢠electronics; its job is âto maintain reliable contact under thermal âŁcycling and â˘to present the correct pin spacing and polarityâ for âthe OEM infinite switch and element leads. Failures usually present asâ high-resistance joints, melted housingsor intermittent contact caused by corrosion, bent terminalsor strain on crimp connectionsand replacement of the⢠kit restores the intended â˘connector geometry and insulation clearances for compatible GE cooktops.
Disconnect power before testing. Typical diagnostics proceed from visual inspection to targeted multimeter checks: âverify continuity across⤠mating terminals, measure element resistance (expect low ohms for intact elements, whereas an âopen reading indicates a break)and⢠check each terminal to⤠chassisâ for short-to-ground (should read open). If a terminal on the receptacle shows openâ continuity toâ the corresponding harness pin but the element measures correctly, the receptacle orâ its â˘crimp is the fault; if the element is â˘open, replace the element. Useâ stepwise isolation-remove one component at a time (element, receptacle, switch, harness) âand retest-to locate whether theâ problem is the receptacle, â˘the elementor upstream wiring.
- Common symptoms: burner does not âŁheat, intermittent heating, visible arcing âor melted connector.
- Quick checks: visual damage,continuity across receptacle â˘terminals,element resistance measurement,terminal-to-chassis short test.
- Isolation procedure: power off â âremove element and receptacle housing â â¤continuity/resistanceâ tests â replace the failed component.
| Item | Description |
|---|---|
| Continuity acrossâ receptacle pins | Closed (low ohms) indicates good electricalâ path;⢠open indicates broken â˘terminal⤠or poor crimp. |
| Element resistance | Typical âintactâ element shows low ohms (single to low âdouble-digit âohms); infinite/OL means open element. |
| Terminal-to-chassis | Should read open/OL; low ohms indicates a âshort to ground and requires âcomponent or insulation replacement. |
Q&A
What âis the WB17X5113 cooktop burner receptacle âkit and what does it include?
The⤠WB17X5113 is an OEM replacement receptacle kit used âon manyâ GE electric ranges and cooktops. It replaces the wiring terminal/plug where the âremovable surface element (burner coil) connects to the appliance. The kit typically includes the â˘receptacle terminal block,insulating spacer/retainer,and the âmounting hardware âŁor⤠clips requiredâ to secure the receptacle⤠to the range. It does not include the removable element (coil) itself.
what symptoms âindicate the âWB17X5113 receptacle may be bad?
Common symptoms include a burner that does not heat, heats intermittentlyor sparks/arcs when the element is connected. âŁYou may also notice a burning or melting smell around the terminalâ area, visible discoloration or corrosion on the receptacleor a loose element âŁconnection. These are signs the receptacle is failing and should be replaced.
How doâ I confirm âŁthat WB17X5113 is the correctâ part for my â¤GE model?
Confirm compatibility⢠by checking your appliance model number (usually on a tag behind the oven door frame, on the cabinet sideor under the â¤cooktop). enter that model number on GE Parts & Accessories or a trusted parts distributor site to⢠verify the required part number. You can â˘also compare the physical shape and terminalâ configuration of the existing receptacle toâ the replacement.when in doubt, contact the manufacturer or anâ authorized parts supplier with your model number.
Is it safe for a homeowner to replace the WB17X5113 themselves?
Yes, a homeowner with basic mechanical skills canâ replace⣠this⤠part, but only after⢠following safety âŁprecautions. Always âŁdisconnect all⢠power to the rangeâ at the breaker panel (do not just turnâ off the oven controls) and verify power isâ off with a non-contact voltage tester.Allow components to⢠cool if recently used.â If you are uncomfortable working with live electrical wiring or the appliance has other complications, hire a qualified appliance technician.
What is theâ basic procedure to replace the receptacle⤠safely?
General high-level steps: 1)â Turn off and lock out power at the breaker; verify power is âoff. 2) Remove the removable element (coil) and drip⣠pan to access the receptacle. 3) Disconnect the element wires from the old receptacle-note wire âŁlocations or takeâ a photo. 4) Remove the old receptacle and âinstall âthe new WB17X5113, securing âany insulating clips or hardware. 5) Reconnect wires to the matching terminals, restore the â¤elementand restore power. 6) Test the â¤burner for proper operation. Do not attempt detailed wiring changes while power is applied.
How can I test the âreceptacle and element with âa multimeter to diagnose the problem?
With power OFF: 1) for the element,disconnect it and check continuity across the element terminals-an intact element shows low resistance (typically a few ohms to tens of ohms).2) Check for continuity from each âŁelement âterminal to ground/chassis-there should be no⣠continuity (open) indicating no short. 3) Inspect the receptacle terminals for continuity to the corresponding wiring harness. If âthe receptacle shows open continuity âwhere âŁit should be closedor if you see short-to-ground readings, the receptacle or wiring is⣠faulty and should â¤be⤠replaced. Always ensure power is âŁoff âŁbefore testing and follow safe meter procedures.
Why do these receptacles fail and how can I prevent future failures?
Receptacles commonly fail due âŁto heat cycling, oxidation/corrosion â¤of terminals, loose connections that âcause arcingor⢠mechanical damage when inserting/removing elements. Prevention includes ensuring elements are seated correctly, replacing corroded⣠or loose âelements â¤and receptacles promptly, avoiding heavy/warped pans that stress the element connectionand periodically âinspecting the terminals for⣠discoloration or looseness. Using OEM replacement parts also helps ensure proper fit and electrical contact.
Can I use an aftermarket replacement rather of the WB17X5113 âŁOEM part?
Aftermarket âreceptacles may function and be less expensive,but OEM⣠parts like WB17X5113 are designed toâ match the⣠original fit,materials,and terminal geometry. If you use an⢠aftermarket part, confirm it matches the terminal spacing, voltage ratingand mounting style of the original. Always choose parts⤠rated for the appliance’s voltage and current. â¤If unsure, OEM or dealer-recommended parts reduce the risk of poor fit or premature failure.
In Summary
The WB17X5113 GE Oven âOven Cooktop Burner Receptacle Kit serves as⢠a critical electrical connection point â˘between the appliance wiring â¤and the cooktop burners. By âproviding a secure, heat-resistant âinterface,⤠the â˘receptacleâ kit helps maintain reliable ignition, âŁconsistent burner performanceand safe operation of the cooktop. As an OEM-designated⢠component, it is engineeredâ to meet the⢠fit, formand safety requirements of the âoriginal appliance design.
Accurate diagnosis âis essential when symptoms such as intermittent ignition, non-functioning burners,⢠or visible heat-related damage are present. verifying the receptacle’s condition through inspection and appropriate electrical testing helps distinguish wiring or control issues from a faulty âreceptacle, ensuring that replacement is both necessary â˘and effective. Replacing a worn or damaged WB17X5113 with⢠a properly specified part restores functionality, reducesâ the risk of⤠electrical or heat-related failuresand supports long-term performance.
When repair is required,â choosing the correct replacement part and following recommended installation practices-whether⤠performed by aâ qualified technician or a learned maintainer-helps preserve appliance safety and reliability.Proper diagnosis and timely replacement of the WB17X5113 contribute to predictable âŁcooktop operation, adherence to safety standardsand optimal lifespan of the oven assembly.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
