A00099902 â˘frigidaire Dishwasher Door Latch is a âdoor latch⤠assembly used on Frigidaire dishwashers; it is indeed a small electromechanical component that secures the appliance door and provides the electrical interlock signals required⣠for⣠normal operation. The assembly typically combines a mechanical strike or catch with one or more âŁswitches or â˘solenoid âactuators and a wiring connectorand is supplied as a service âreplacement part âto restore door locking and switch⢠functions whenâ theâ original latch is worn or damaged.
Within the appliance, the latch performs âtwo⤠primary roles: it mechanically holds the door closed against the gasket to maintain a watertight sealand⣠it actuates the control systemâ by âclosing one or more interlock switches (or signaling a lock solenoid) so that the control board permits pumps, heaters and âŁtimers to run. The latch thus interfaces directly with the door strike and gasket, the mainâ control board through the wiring harnessand⣠indirectly withâ safety and cycle-control functions-if the latch does not register as locked,⢠the dishwasher will not start or will â˘halt the cycle to prevent water escape âand unsafe operation.
In this article you will find a technical âŁexamination of the A00099902â latch, including how it functions, how to determine compatibility with specific frigidaire models, common failure modes and symptoms (such as â¤a door that will not lock, cycles that will not startor intermittent operation)and systematic â˘troubleshooting checks a technician or âinformed owner can perform. The article will â¤also âŁoutline practical replacement considerations-connector types, alignment⤠and mounting, gasket inspection,â andâ basic safety precautions â˘such as isolating power⣠and water-so readers can assess whether repair or replacement is required and understand the criticalâ installation points⣠that affect reliable operation.
Table of Contents
- Function â¤and Role of the Door⣠Latch Assembly in Frigidaire Dishwashers
- How the A00099902 Frigidaire Dishwasher Door Latch Integrates with the Door Interlock, Actuatorand Control Board
- Common Failure Symptoms,â Diagnostic Indicatorsand Associated Error⣠Codesâ for door Latch Malfunctions
- Compatibility, âReplacement Considerationsand StepâbyâStep Installation â˘Procedures for âthe A00099902 Frigidaire Dishwasher Door Latch
- Q&A
- Future Outlook
Function and Role of the Door Latch Assembly in Frigidaire Dishwashers
The A00099902 Frigidaire Dishwasher Door Latch â˘isâ a combined mechanical catch and electrical interlock that â˘secures⣠the door â¤and signals the control board â¤that the cabinet is sealed.Mechanically, the latch â¤engages with a striker on the door to hold the seal under wash pressure; electrically, an internal microswitch (or switches) completes the start circuit and enables the heating andâ wash sequences only while the switch is actuated. proper alignment of the latch with the door striker and correct spring tension⣠are required to maintain the water-tight seal and reliable switch actuation throughout the cycle.
In service, the latch behaves âŁboth as a safety device and a signal source for diagnostics: failed latches commonly cause no-start conditions, intermittent âoperationor door leaks. Wear and deformation of the plastic catch,brokenâ springs,or failed microswitch contacts are typical failure modes; âcontamination from detergent residue or chipping on the striker can also prevent full engagement.Technicians should confirm mechanical engagement, continuity⤠of the latch switch while latchedand correct mountingâ orientation when verifying compatibility or replacing the part.
- Symptoms: dishwasher will not â˘start, starts then stops,â no audible latch click, door â¤does not stay closed, visible water leakage âduring cycle
- Common causes: worn catch, broken spring, failedâ microswitch contacts, misaligned striker, contamination buildup
- Checks to perform: verify mechanical⤠engagement, measure switch continuity with door latched, inspect striker⤠and seal alignment
| Item | Description |
|---|---|
| Part | A00099902 door latch assembly -â mechanical catch with electrical interlock |
| Function | Secures door under pressure and provides a closed-door signal⤠to the control board |
| Mounting | Panel-mounted on the top edge of the tub opening; requires correct orientation for switch actuation |
| Electrical | Internal microswitch contacts (normally open/closed depending on model) -⣠test for â¤continuity when latched |
How the A00099902 Frigidaire Dishwasher Door latch Integrates with the Door Interlock, Actuatorand Control Board
The A00099902 Frigidaire Dishwasher Door Latch is a combined mechanical and electrical assembly that ensures the door âis physically secured and that the control board receives a reliable closed-door signal.â Mechanically, âthe latch engages the door striker and holds the door against the tub gasket during âfill, washand drain events;â electrically, an internal switch or sensor changes state when the⣠door is fullyâ latched, providing âaâ low-voltage signal to the control board or to a separate door interlock module. In some dishwasher architectures the control board will briefly energize âan actuator or lock coil after detecting the closed condition to maintain positive engagement during high-pressure â¤cycles, so the latch must both provide the correct âmechanical alignment and present the expected âŁelectrical continuity or logic level to the controller âfor normal operation.
- Symptoms of latch-related failure: no-start or door error codes, intermittent stops mid-cycle, audible buzzing of a lock âactuatoror a door that won’t stay closed.
- Practical diagnostic steps: verify continuity or⤠switch operation with the door closed, observe whether the actuator is energized during the lock phaseand inspect the⣠striker and plastic catch for wear.
| Item | Description |
|---|---|
| function | Detects and holds the door closed; provides a closed-door signal to the control board and âŁmay interface with a lock actuator. |
| Interface | Mechanical striker engagementâ plus a â˘low-voltage electrical signal (switch/sensor) to the control board or interlock module. |
| Common failure modes | Worn or broken plastic catch,⢠failed internal switchor actuator that does⣠not engage âdespite correct board signals. |
For â¤replacement or troubleshooting â¤of the⢠A00099902 âFrigidaire Dishwasher âDoor Latch, match the âmounting geometry and connector⣠type to ensure⣠the mechanical striker aligns and the control board receives⤠the expected⣠signal; mismatched alignment can allow the switch to close âwhile the seal is compromised, producing leaks âor false “latched” indicators. Technicians shouldâ measure the electrical state of the latch in both open and closed positions and, where applicable, confirm the control board energizes the lockâ circuit during the lock interval. If the latch fails electrically but appears intact mechanically,the internal switch or wiring âis the likely cause; if it fails to hold the door under pressure,replace the assembly to restore proper sealing and safe âoperation. Strong mechanical fit and correct electrical behavior together determine â¤compatibility and reliable operation in the âdishwasher system.
common Failure Symptoms, Diagnostic Indicatorsand Associated Error Codes for door Latch Malfunctions
The door latch assembly secures the⢠dishwasher door during fill and wash cycles and provides electrical feedback to the control âboard via one or more interlockâ switches. The â˘replacement â¤unit A00099902 Frigidaire Dishwasher Door Latch performs both mechanical engagement with âthe door strike and the electrical function of a closed/locked sensor;â typical failures occur either as a worn âor broken strike/latch hook that prevents firm engagement,or as a failed microswitch (open circuit â˘or intermittent contact) that prevents the control from detecting a closed door. Technicians should note the latch’s dual role: correct mechanical alignment is required to compress the switchâ reliably, â¤and the electrical contacts must present expected continuity when the door⤠is fully closed. Compatibility is determined by the striker geometry and connector type, â¤so inspect harness plug shape and mounting holes before âinstalling a replacement latch to avoid fitment and sensing issues.
Common observable â¤symptoms⤠include failure-to-start, mid-cycle stoppageor a latched-but-unlocked condition; diagnostic indicators are mechanical âŁwear, inconsistent continuity readings across theâ switch when actuatedand door-sensor âmessages on the⣠control display.Use a multimeter to measure continuity across the interlock switch with the door latched (expect ânear-zero ohms when closed) and verify that the control supplies the expected âŁlatch voltage during the start sequence; âif the control provides voltage but the latch does not⤠register closed, the fault is in the latchâ or its harness. After replacing the latch, re-test door travel and âswitch actuation and clear any stored fault in the controlâ (power âŁcycleâ or service mode) to⤠confirm the â˘issueâ is âŁresolved.
- Dishwasher will not start; display shows a door-related message or lock indicator.
- Cycle stopsâ or pauses mid-cycle when the door moves slightly.
- Audible clicking at the latch or a stuck latch that does not release.
- Intermittentâ operation that passes visual inspection but fails continuity checks.
- Visible broken plastic, stripped threadsor misaligned strike preventing full engagement.
| Item | Description |
|---|---|
| DOOR / ld (display) | Front-panel message âindicating the control detects the door as open or the door-lock sensor is notâ reporting âclosed; prevents cycle start or causes pause. |
| Latched physically but no continuity | Multimeter shows open circuit on⣠latch⣠switch while door appears closed; indicates failed microswitch or damaged internal contacts in the latch assembly. |
Compatibility, Replacement Considerationsand StepâbyâStep Installation Procedures for the A00099902⢠Frigidaire Dishwasher Door Latch
The âA00099902 Frigidaire Dishwasher Door â¤Latch is a combined mechanical catch âand electrical interlock that holds the door closed duringâ wash cycles and â˘signals the control⣠board when the door is fully latched. Compatibility depends on three measurable characteristics: the latch’s mounting-hole spacing and orientation, the door⢠thicknessâ and strike alignment that set actuation traveland the electrical connector type⢠and switch configuration. Before purchasingâ a replacement confirm the physical dimensions, verify the harness connector and number of switch contactsand inspect âŁthe door strike and seal for wear; a correctly matched latch will restore both mechanical closure and the safety interlock function, while a mismatched unit can produce false-open faultsâ or prevent the detergent dispenser from operating.
- Cut power at the breaker and confirm the dishwasher⢠is de-energized; remove âlower access panel âand open the â˘door to a service position.
- Remove inner âŁdoor screws to expose the existing latchâ assembly and note the orientation andâ routing of the wiring harness; take a photo for reference.
- Disconnect the harness connectors and remove the latch from its mounting tabs or screws; compare theâ replacement part to ensure identical mounting âgeometry and connector type.
- Install âŁthe ânew latch in the âsame orientation, route the âharness without pinchingand secure mounting screws âŁto⤠recommended torque; reassemble the inner doorâ panel.
- Restore power and perform a functional check: verify door closes smoothly,â use a⤠multimeter to check continuity of the latch âswitch when closedand run a short cycle to confirm the control recognizes the â˘closed-door state and⣠no fault⣠codes appear.
Typical âtechnician tools for this replacement are a Phillips screwdriver set,nut drivers for access panels,and a multimeter for continuity checks. If â˘the new latch passes mechanical and electrical checks but the door still fails to register as closed, examine the strike plate and door alignment âfor binding âor excessive gap; minor shims orâ hinge adjustments â˘frequently enough resolve alignment issues. Keep the original partâ for referenceâ and document part numbers âand connector pinouts when updating service records âto â˘expedite future repairs.
| Item | Description |
|---|---|
| Mounting pattern | Verify hole â˘spacing and orientation to match âexisting door inner â¤panel cutouts. |
| Electrical âinterface | Confirm connector type and number of switch contacts for interlock signaling. |
| Function | Mechanical catch plus microswitch interlock; must actuate reliably at nominal door travel. |
Q&A
What is the A00099902 Frigidaire dishwasher door latch and what does it do?
The A00099902 is a door latch/strike assembly used on⣠many Frigidaire (and related) dishwashers. It secures the⤠door during fill and⢠wash cycles and contains the mechanical actuator and electrical door switch (microswitch) that tells the control board the door is closed. if the latch isâ defective the dishwasher may not start, may stop mid-cycleor may leak.
How can âŁI tell if the door latch (A00099902) is bad?
Common symptoms of a failing latchâ include the dishwasher not starting and indicating âdoor open,â intermittent starts/stops, a door that won’t stay closed, audible clicking but no â¤start,⣠or visible damage to the plastic latch components. Inspect for broken plastic, missing âspring action,â burnt/melted contactsorâ a loose wiring âconnector. If the âdoor physically âcloses butâ the control reportsâ it open, the latch switch is suspect.
can I â¤test the A00099902 latchâ with â˘a multimeterand how?
Yes. First disconnect power. Remove⢠the inner door access panel to access⤠the latch wiring. Unplug the latch connector and identify the microswitch terminals. â˘With the latch in the âopenâ position you should see an â¤open circuit (infiniteâ resistance). Manually actuate âthe latch (simulateâ the door closed) and the switch should show continuity (near 0-a⢠few ohms). If the microswitch does ânot change⣠stateâ when actuated, the latch assembly is faulty. Consult your model wiring diagram to confirm which â˘pins to âtest.
Is A00099902 compatible with âmy Frigidaire/whirlpool/Kenmore dishwasher?
A00099902 is an OEMâ part used on many frigidaire and⣠related-brand models, but compatibility varies by model and manufacture year.The safest methodâ is to check your dishwasher’s model â˘number (usually on the door frame) and crossâreference it on Frigidaire’s parts site⢠or⢠the retailer’s compatibility tool.⤠Do not rely solely on visual similarity-use the model/part cross-reference toâ confirm fit.
How do I replace the A00099902 door latch? What tools and safety steps are needed?
Basic replacement steps: 1) Disconnect power (unplug or turn off breaker) â˘and â¤turn off water supply if desired. 2) open the door â¤and remove screws securing⤠the inner door panel, then carefully separate⢠theâ inner panel to expose⢠the latch. 3) disconnect âŁthe wiringâ connector andâ remove âŁthe âscrews that secure the old⣠latch. 4) Install the new â˘A00099902, âsecure screws, reconnect the wiring harness, reassemble the door paneland restore power. Common tools: â¤Phillips screwdriver, nut driversand possibly a trim tool for clips. Wear gloves âto protect from sharp metal edges âand keep the door supported while working.
How long does it take and how difficult is⢠it to replace the latch?
For a person agreeable with basic appliance repairs,replacement typically takes 30-60 minutes. Difficulty is moderate: mostâ workâ is removing the âdoor inner panel and reconnecting a small wiring connector. If you’re uncomfortable with electrical work or working inside the door, hire a technician.
Can the door latch be repaired rather of replaced?
Most of theseâ latches areâ inexpensive and âdesigned as sealed assemblies; repair is â˘usually not practical. If⤠the problem is a loose connector or an âadjustment (door⤠strike alignment),those can be fixed. If the microswitch or plastic actuator is broken, replacement⣠of âŁthe âentire A00099902 assembly is recommended for reliableâ operation.
I replaced the latch but â˘the dishwasher still won’t start-what should I check next?
Verify the latch wiring is connected and the switch is functioning (test continuityâ when the latch is closed).Check for error codes or flashing indicators inâ the dishwasher’s diagnostics mode (refer to your model’s service manual). Inspect the door hinges/strike for alignment-if the door doesn’t fully engage the latch the switch won’t âŁclose. â˘If the latch is good and the door is properlyâ engaged, the issue could be a faulty control board, wiring harness, thermalâ fuseor other safety interlock; at that point runâ diagnostics or contact a technician.
Future Outlook
the A00099902 Frigidaire Dishwasher âDoor Latch plays a central role in ensuring the appliance operates safely and effectively by securing the door during wash cycles, maintaining a watertight sealand âengaging door-switch mechanisms that allow the machine⤠to start and run.⢠As a mechanical and âŁelectrical interface between the user and âŁthe dishwasher’s control âsystems, a functioning latch supports consistent performance, helps prevent âleaks or interrupted cyclesand âcontributes to⢠overall household safety â˘and convenience.
Because symptoms of a failing âŁlatch can overlap with issues in door alignment, wiringor control components, accurate diagnosis is important before replacement. Whenâ replacement is warranted, using theâ correct A00099902 part and following proper⢠installation and testing practices helps restore reliable â¤operation and minimizes the risk⢠of recurring problems.For complex diagnostics orâ uncertain repairs, consulting qualified service personnel ensures the repair is completed safely and in accordance with manufacturer specifications.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
