38034P Speed Queen 38034Pâ Washer Motor & Pump Kit 2-Speed 120V is a combined electromechanical drive and drain-pump âŁassembly designed for 120⢠V AC two-speed⤠washing machines. âThe kit pairs âa â˘two-speed motor-used to provide both low-speed agitation and high-speed â˘spin-with a⤠pump mechanism that evacuates wash water; mechanically and electrically⤠it is indeed supplied as a single replacement unit âto simplify service and restore both ârotation and drainageâ functions in compatible Speed Queen machines.
Inside the appliance theâ assembly performs â¤twoâ primary âfunctions: generating torque to drive the transmission/agitator âŁand spinning the tub during âextractand pumping wastewater fromâ the wash tub âto the drain⤠line.It interfaces electrically with the â˘machine control (timer or electronic board), line power and relay/contact circuits that select motor speedand⢠safety interlocks â˘such âas the lid switch orâ door lock; mechanically it mounts âto theâ base â¤or rear of the cabinet and couples to⣠the transmission or agitator via a shaft or coupling, while⢠theâ pump â˘housing connects to the tub outlet and drain plumbing. Proper electrical rating, mounting orientation and correct coupling â¤to the transmission and plumbing are vital for reliableâ operation âand to avoid mechanical or hydraulic faults.
In âthis article readers will findâ a technical overview of how the 38034P motor and pump operate, guidance on model compatibility and electrical requirements, common failureâ symptoms to⤠recognize (such as loss of agitation or spin, failure to drain, abnormal noise â¤or overheating), step-by-step troubleshootingâ checks to isolate motor versus pump faults, â˘and practical replacement considerationsâ including harness/connector matching, mounting and âsealing checks, âand safety precautions for servicing. The informationâ is presented⤠to aid technicians,⤠engineers and â˘appliance â¤owners in diagnosing issues and making informed repair decisions withoutâ assuming prior familiarity with this specific⣠part â¤number.
Table of Contents
- functional Role and electrical âand Mechanical Performance Specifications⢠ofâ the Washer Motor andâ pump Assembly
- Howâ the 38034P Speed Queen 38034P Washer Motor & âŁPump Kit 2-Speed 120V Operates Within the â˘Washer Drive, clutch â˘andâ Drain⣠Systems
- Common Failure Symptoms: Electrical, Mechanical and âHydraulic Indicatorsâ for the Motor & Pump Kit
- Compatibility, Replacement⣠Procedures, âInstallation⢠Considerations and âTroubleshooting Protocols for Service Technicians
- Q&A
- To Conclude
Functional Role and Electrical⢠and⤠Mechanical Performance Specifications of âthe Washer Motor and Pumpâ Assembly
The 38034P Speed Queen 38034P Washer âMotor & Pump Kitâ 2-Speed 120V is an integrated motor â¤andâ pump assembly that provides the mechanical âdrive⣠for â˘both agitation â˘andâ spinâ cycles while also operating the wash â¤tub drain pump. The module contains a single-phase, two-speed motor coupled to the⤠washer transmission and a direct-coupled pumpâ impeller; the two discrete speeds â- low for agitation and high for spin – are⢠selected by the âmachine’s control system. Mechanically, the assembly must match the originalâ unit’s mounting footprint, shaft orientation,⣠and electrical connector pinout so the transmission coupling and drain plumbing âalign âwithout âmodification; electrically, it⣠requires a â¤120 V supply and the same start/run wiring scheme used by the âoriginal equipment to maintain motor protections and timing âbehavior.Practical example: swapping thisâ kit into⢠a machineâ with a seized pump or a motor that no longer âŁproduces spin restores both drain function and the torque profile needed to accelerate the tub during extraction, âŁprovidedâ the âharness and ground⢠are compatible.
- Key features: 120 V single-phase operation,two-speed output â˘(agitate/spin),integrated pump impeller,factory mounting pattern.
- Compatibility checkpoints: matching⣠connector type, identical mounting â˘bolt locationsand â˘equal or greater⢠rated current and thermal protection.
- Common symptoms addressed: no â˘agitation, âno spin,⢠failure to â¤drain, abnormal motor noise or overheating.
| Item | Description |
|---|---|
| Voltage | 120 V single-phase |
| Speed selection | Two discrete speeds for âagitation and spin |
| function | Drives transmission for tub motion and operates drain pump |
From an electrical and mechanical performance perspective, the motor⣠portion delivers âsufficient torque and rotational speed transition to match the âtransmission gearing used inâ compatible Speed Queen models; the pump portion is âsized âŁto evacuate tub water within the machine’s stated⣠drain cycle time.Technicians should âŁverify winding continuity and insulation resistance with a â¤meter, confirmâ that the start/run circuitry or âcentrifugal switching is present and functioningand compare rated inrush and running current against⣠the original specification to⢠avoid âŁoverloading âcontrol relays or wiring. When fitting⣠this replacement, test inâ a dry bench setup first to confirm correct rotation direction â˘and pump flow, then perform a full-cycle âtest under load to validate âthermal â¤behaviorâ and vibration characteristics before returning the machine to service.
How the 38034P Speed Queen 38034P Washer Motor & Pump Kit 2-Speed 120Vâ Operates Within the Washer Drive,Clutch and Drain Systems
The 38034P Speed Queen 38034P Washer Motor & Pump Kit 2-Speed 120V provides the rotating power and fluid removal functions that interface directly âwith âthe â˘washer’s drive train,clutch⤠assembly,and â˘drain system. The kit contains a motor â¤capable ofâ two discrete speed outputs that the âwasher⤠control selects âfor agitation (low speed) and spin (high⣠speed); torque from âŁthe motor âis transmitted through the transmission or clutch packâ to the tub and agitator, while a pump mounted to the motor or coupled to the motor shaft evacuates washâ water during drain cycles. Electrical selection between low and high speed is normally âhandled by switchâ contacts⤠or âthe âmachine controller and requires correct wiring and compatibility with the existing transmission/clutch configuration to ensure âŁproper timing and direction of torque transfer.
During âŁan âŁagitate cycle the motor runs at the low speed âsetting and the transmission/clutch converts motor torque into the alternating motion of the âagitator; âŁduring spin the motor is switched â¤to the two-speed high setting and⢠the clutch engages âthe spin gear to accelerate the tub. â˘The pump operates when âthe control initiates âŁa drain interval; as theâ pump is mechanically tied to the motor, it’s â˘effectiveness depends on shaft orientation, impeller conditionand unobstructed flow âŁpath. âPractical replacement and troubleshooting examples include verifying correct connector⣠positionsâ and mounting orientation when installing the kit,checking for a slipping clutch or worn âtransmission if the âmotor runs but the⢠tubâ does not accelerate,and inspecting the pump impeller or inlet screenâ when slow or incomplete draining is observed.
- low-speed: torqueâ forâ agitation âŁtransmitted through transmission/clutch
- High-speed: direct⤠torque toâ spin tub when clutch engages
- Pump driven by motor coupling-impeller condition affects âdrain performance
- Compatibility factors: mounting flange, shaft⣠length/orientation, electrical connector pinout
| Item | Description |
|---|---|
| Motor | Two-speed AC motor for low (agitate) andâ high (spin) outputs |
| Voltage | 120V operation; matches standard household supply and control âsignaling |
| Pump | mechanically coupled⤠impeller for draining; âperformance depends on shaft orientation and clear âflow path |
| Compatibility | Requires matching mounting pattern, shaft dimensions, âŁand connector arrangement to existing Speed Queen drive/clutch assembly |
Common Failure Symptoms:⤠electrical, Mechanical and Hydraulic Indicators â˘for the Motor â& Pump Kit
The 38034P Speed Queen 38034P Washer Motor & Pump Kit 2-Speed 120V â¤combines the⢠drive motor and drain/pump⣠assembly so that electrical, mechanical and hydraulic⣠faults can produce overlapping symptoms; technicians should treat each symptom⣠class as âŁa distinctâ diagnostic path. Electrical indications⤠include no-start,⣠intermittent operation, single-speed operation (one speed works but the other does ânot), â˘humming with⢠no rotation, blown fuses or tripped breakersand⣠overheating. Mechanical indicators âare âabnormal noises (grinding, scraping), shaft play, seized bearings or damaged impeller/gear interfaces. Hydraulic symptoms manifest as slow or no draining, weak flow, cavitationor water âbypassing seals and creating leaks that can load the motor. Because the unitâ is⤠a two-speed 120V design,⢠a failure in a winding, switch/relayor speed-selection circuitâ can disable one speed while leaving the other functional; likewise, â¤a hydraulic restriction can⣠cause high current draw and thermal cutouts even when the â¤motor electrical system measures nominal voltages.
- Hummingâ without â¤rotation – possible seized pump, jammed impelleror open/startâ winding.
- One speed runs,the other â˘does not – possible winding open,selector relay failure,or centrifugal switch/contact⤠issue.
- Excessive current or tripping âbreakers – âŁmechanical binding, bearing failure, hydraulic ârestrictionor shorted windings.
- Poor drain or low flow âŁ- clogged hoses/strainer, damaged impelleror leakâ bypassing pump.
- Grinding orâ metal-on-metal⢠noise – worn bearings, lose⣠fastenersor broken internal gear teeth.
| Item | Description |
|---|---|
| Electrical âreading | Measure supply voltage at motor terminals (should read ~120V) and check winding⣠continuity and â¤insulation resistance; âpresence of voltage with no rotation suggests mechanical âload or openâ start circuit. |
| Mechanical check | Manually turn shaft/impeller to verify free rotation; audible grinding or axial play indicatesâ bearing/shaft failure requiring replacement. |
| Hydraulic inspection | Inspect inlet/outlet hoses, strainers and impeller for debris; restricted flow or⤠damaged vanes reduces pump efficiency and increases motor load. |
Compatibility, Replacement Procedures, Installation Considerations⢠and Troubleshooting Protocols for Service Technicians
The 38034P⤠Speed⣠Queen 38034P Washer Motor & Pump Kit 2-Speed â¤120V combinesâ a two-speed induction motor âand a matched drain pump â˘designed to restore agitation/spin functions and water evacuation âon compatible commercial-style washers. Technicians should confirm mechanical and electrical compatibility before replacement: verify the motor mountingâ boltâ pattern and shaft diameter against the âservice âmanual, confirm that the harness pinout and connector types match theâ originaland ensure the 120V supply and control signals available from the machine’s selector/switch assembly correspond to the kit’s two-speed windings. During removal and installation,tagâ connectors,photograph wiring,and preserve anyâ shims or alignment marks so reassembly maintains correct shaft height and impeller clearance; incorrect motor offset or a â˘misaligned coupling will produce vibration,premature bearing âfailure,or poor water extraction performance.
Installation considerations emphasize safe verificationâ and⤠systematic troubleshooting: isolate power,drain theâ tub,andâ bench-test the motor and pumpâ with a multimeter toâ check âwinding continuity and insulation resistance â¤before fullâ reinstallation. If the motor âŁruns but the basket does not spin,inspect âthe⤠coupling/clutch and speed-selection circuitry; if the âŁpump runs but fails to evacuate water,check impeller condition and discharge hose blockage. âŁCommon diagnostic checks include measuring line voltage at â˘the motor during run, observing current draw for signs âŁof âŁbinding or low torque, âand listening for bearing noise or rotor rubbing. The list below summarizes practical âchecks technicians âperform during replacement and diagnosticâ procedures.
- Confirm physical fit: bolt pattern, shaft size, âand pump orientation.
- Verify electrical âcompatibility: 120V supply, connector pinoutand speed-selection wiring.
- Measure motor winding continuity and insulation resistance with a multimeter or⢠megohmmeter.
- Inspect pump impeller and⢠discharge path for obstructions or wear.
- Check for proper shaft alignment,coupling â¤engagement,and any missing âshims.
- Monitor running current and temperature to detect bearing or winding faults.
| Item | Description |
|---|---|
| Voltage | 120 VAC supply; confirm under load at motor terminals |
| Speeds | Two-speed windings for agitation and spin; verify selector switch control |
| Mounting | Motor bolt pattern âand pump âorientation must match chassis mounting |
| Connectors | Match harness pinout; label wires before disconnecting |
| Common failure modes | Bearing wear, damaged impeller, windingâ short/open, coupling/clutch failure |
Q&A
What machines does the 38034P Speed Queen 38034P⤠Washer⢠Motor & Pumpâ Kit fit?
This kit is designed⢠for Speed Queen â˘washers that specify part number 38034P. Compatibility varies byâ model year and control⣠configuration, âso confirm fit by matching the part number âon your old â˘motor/pump⢠or by⣠checking your washer’s parts list/service manual.If in âdoubt, provide your washer model and serial⣠number toâ a parts dealer or Speed Queen service⢠for âŁverification.
What âexactly is included in the â¤kit?
Typically the âŁkit contains â¤the replacement â2âspeed 120V motor âŁand the associated drain pump assembly plus âany necessary âmounting hardware,â gaskets or seals listed in the product description. Always check the seller’s item description or packingâ list to confirm the exact contents before installation.
what symptoms indicate the motor or â˘pump needs to be replaced?
Common signs include: washer won’t spin â¤or agitate but control cyclesâ appearâ normal; motor hums or trips the breaker; âwasher won’t drain (pump failure) or leaks from⢠the pumpâ area; loud grinding, âclunkingor excessive vibration from the base; orâ a burning smell from the motor. Intermittent operationâ can also indicate worn brushes or internal motor failure.
Can I install this kit myselfand what are the âbasic installation steps?
Qualified DIYers can install it, but you must follow safetyâ procedures. Basic steps: disconnect â¤power; access the âŁmotor/pumpâ by removing the backâ or front panel per your âmodel;⢠photograph/label wiring connections; â¤disconnect hoses and electrical connectors; unbolt and remove the old motor and pump; transfer any required brackets⢠or couplings and âinstallâ theâ new parts; reconnect hoses and wires exactly⤠as original; reassemble and test with an empty or small load.If you⣠are not cozy with electrical wiring or lifting the washer,hire âa technician.
How is the two-speed motor wired or selected between high and low â˘speed?
Two-speed motorsâ have⣠separate windings or taps for the agitation and spin speeds; âthe washer’s âcontrol or timer selects which winding receives 120V.⤠When â¤replacing the motor, â¤match each wire/terminal to the original connections using⣠the wiringâ diagram on the motor or the machine’s schematic. Do not attempt to ârewire speeds by guessing-incorrect wiring can damage the motor or controls. âif the motor label/wiring âdiffers,consult the service manual or â¤a technician.
How can I test theâ motor and pump to â¤confirm âwhich âŁpart is bad?
With the machine unplugged, use a âŁmultimeter to check âfor continuity of motor windings and for shorts to ground (motor case).Manually spin the motor shaft to check for binding. For the pump, inspect⣠the impeller for damage and⢠ensure âit turns freely; you can also bench-test the pumpâ with 120V only if you areâ experienced⢠and take proper safety precautions. An obvious burnt smell,visible damage,open âwindings (infinite resistance),or continuity to ground indicate replacement is needed.
After replacement I âŁstill have noise or poor spin-what â¤else should I check?
Noise or poor spin can be caused by factors other than â¤the motor/pump: â¤worn tub bearings, damaged⤠suspension/shock absorbers, a bent motor shaft â˘coupling, foreign objects inâ the tubor an unbalanced load. Verify âŁmounting bolts are tight, shock absorbers/springs âŁare intactand the drive coupling or transmission is serviceable. Address these mechanical⢠issues if present.
Are the motor brushes âserviceable or âŁdo I âneed to replaceâ the whole motor?
Some washer motors have replaceable carbon brushes; others are factory sealed. Inspect the motor â˘end caps-if there are brush capsâ or accessâ ports, brushes can typically be replaced. If the motor is sealed or brushes âare⢠not accessible, the motor assembly must be replaced. Check the part manual or inspect the motor to determine serviceabilityand use OEM brushes if replacement is needed.
To Conclude
The 38034P Speed⢠Queen 38034P Washer Motor & Pump Kit 2-Speed 120V is⤠a core drivetrain âŁcomponent⤠that combinesâ the motor and drain pump functions required for agitation, spinning âŁand water removal in compatible Speed Queen machines.Asâ a âmatched kit designedâ for 2-speed 120V systems, it plays a direct role in restoring proper mechanical âoperation, maintaining washing performanceand supporting the overall reliability and longevity âof the appliance.
Proper diagnosis is essential before replacing this kit:â identifying whether symptoms stem from â˘the motor,pump,controls,wiring or other subsystemsâ prevents unnecessary parts changes and reducesâ service time and âcost. When replacement is warranted, using the correct kit and following manufacturer specifications âor professional installation practices⣠helps ensure safe, reliable results and preserves appliance performance and warranty considerations.
the 38034P motor andâ pump kit is an important ârepair âŁitem for ârestoring key wash âand drain functions in compatible Speed Queen âwashers. Accurate troubleshooting,correct part selection andâ proper installation â˘are⣠the best ways to maximize operational âŁefficiency,minimize repeat failures and maintain safe,consistent â˘laundryâ performance over time.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
