5303935067 âŁFrigidaire Range Flat Oven Ignitor â3-1/4″ âis a flat-style hot âsurface ignitor assembly designed for âŁuse in gas ranges and ovens. The component âŁconsists âof â˘a ceramic/glass resistive element mounted on a flat⣠bracket with âŁa pigtail or plug-styleâ electrical connector; the 3-1/4″ dimension refers⤠to the ignitorâ element length and is aâ key physical âcharacteristic for fit and alignment in the burner⣠box.
Functionally, the ignitor is a primary ignition âdevice that converts â¤electrical energy from theâ oven control into heat,⢠reaching a glow⤠temperature that⢠allows the gas safety âvalve to open⢠andâ sustain combustion.â It interfaces directly with the oven⣠control board, the gas safety/valve assembly and the burner âŁmanifold; correctâ electrical current and temperature are required toâ trigger the valve.â The ignitorS condition â˘therefore affectsâ ignition timing, safety⣠interlocks (preventing unburned gas flow)and stable flame establishmentand it is subject to thermal âcycling, â˘mechanical stress,â and wiring/connectorâ degradation.
In â¤this article readersâ will⤠find aâ technical explanation⤠of how the 5303935067â ignitor functions, guidance âon model and dimensional compatibility (mounting configuration, connector type and element length), common âfailure symptomsâ (no⤠heat, extended glow time,â clicking relays,â gas smell or intermittent ignition)and step-by-step âtroubleshooting procedures including visual inspection, resistance and voltage checksand safe isolation of power/gas.The article will also cover practicalâ replacement considerations-matching part dimensions and connector, securingâ theâ ignitor âand gaskets, verifying correct operation after⣠installation-and safety precautions technicians and owners âshould follow during diagnosis and replacement.
Table ofâ Contents
- Function and⢠Role of the Oven Ignitor in Gas Range âIgnitionâ and Safetyâ Systems
- How the â5303935067 Frigidaire Range Flat Oven Ignitor 3-1/4″ Operates Within the⢠Gas âValve, Control Circuitand Thermal Profile
- Diagnostic Indicators â¤andâ Common Failure symptoms âŁofâ a Flat Oven Ignitor
- Replacement Considerations, Compatibility with Frigidaire Modelsand⢠StepâbyâStep Installation Guidelines
- Q&A
- Future Outlook
Function and Role â˘of the Oven Ignitor in Gas Range Ignition and⢠Safety⣠Systems
The 5303935067 Frigidaire Range Flat Oven⣠Ignitor 3-1/4″ is a hot-surface âignition element designed⣠to reach incandescent temperature quickly and provide the thermal energy required â¤to initiate gas flow and ignition in compatible⣠Frigidaire ovens. Electrically, the device is a high-resistanceâ heater: when the control board applies voltage⢠to⣠the ignitor,â its resistance causes it to heat â¤and glow.The oven’s safetyâ circuitry⣠monitors the ignitor’s electrical⢠and â˘thermal⢠behavior (often by sensing current draw or voltage â¤characteristics) and only⤠energizes the gas valve once âthe ignitor has reached a predefined operating condition. â˘Degraded performance â- âŁsuch as âhigher-than-normal cold resistance,mechanical cracking of the ceramic surface,or a noticeably weak glow – will prevent âthe safety âŁcircuit from opening âthe â¤gas valve,producing a⣠common failure mode where the⤠ignitor draws power but the oven does not light.
Replacement and troubleshooting require matching physical and electrical characteristics: the 3-1/4″⢠length âand mounting âfootprint determine clearance andâ alignment with the burner port, while the terminal/connector âtype and cold⢠resistance determine electrical compatibility with the range control. Technicians typically verify the part withâ a two-step approach:⢠(1) measure cold continuity and⣠compare resistance against⤠the manufacturer’s service data for the specific modeland â(2) perform a live operational check (with proper safety precautions) to confirm â¤the ignitor reaches â¤a luminous orange glow within a few seconds and the gas valve is enabled. If âthe ignitor glows normally but the oven still fails⣠to light,the next checks are the⢠gas â¤valve coil and control outputs. Common practical considerations includeâ ensuring secure â˘connectorâ fit, inspecting for brittleâ insulation or mounting â¤bracket deformationandâ selecting the 5303935067 replacement only for models listed âŁin âtheâ appliance parts compatibility âguide.
- Slow or weak glow fromâ the ignitor
- Continuous clicking or repeatedâ ignition attempts
- Oven control⢠energizesâ ignitor but no gas flow
- Visible⢠damage or cracking on the flat âignitor surface
| Item | Description |
|---|---|
| Part number | 5303935067 Frigidaire Range Flat Oven Ignitor â3-1/4″ |
| Length / Fit | 3-1/4″ element length; mounting location and terminal style âmust match âŁoven âmodel for proper alignment with burner â¤port |
| Function | hot-surface heater that reaches ignition temperature and signals safety circuitry toâ open the gas valve |
| Typical diagnostic check | Measure cold â¤resistance for continuity,then perform a controlled live test to verify â˘rapid â¤brightâ glow and⣠subsequent gas⣠valve⣠activation |
How âŁthe 5303935067 Frigidaire range Flat Oven Ignitorâ 3-1/4″⢠Operates Within the Gas Valve,Control circuit,andâ Thermal profile
5303935067 Frigidaire Range Flatâ Oven Ignitor 3-1/4″ â˘is a flat hot-surface ignitor⢠designed⢠to heat quickly and draw sufficient current from the lineâ to actuate the gas valve coils in the oven control circuit.â In typical operation the control âmodule applies line voltage to the ignitor; as âthe element heats its resistance falls and the resulting currentâ flowâ reaches the threshold needed to open the gas valve solenoids. The ignitor is therefore both a heat source⤠and a measurable electrical load used by the âcontrol circuitry to determine âwhenâ to introduce gas. Proper mechanical fit â˘and electrical connectionâ (correct spade terminals and harnessâ polarity) are necessary â˘forâ the partâ to function compatibly with the valve âŁand safety interlocks âon specific Frigidaire range models.
The thermal profileâ of this flatâ ignitor governs ignition timing and âŁsafety behavior: â¤a âhealthy unit ramps to productive glow⢠within a defined â¤time window and âŁsustains current long⢠enough for â˘stable valve operation. Symptoms of âŁanâ ignition problem often point to âtheâ ignitor’s thermal/electrical behavior rather â˘than the valve itself -â for example, a dim or âslow-to-glow â¤element typically produces insufficient currentâ and prevents the gas valve from opening, while an element thatâ glows normally but âdoes not draw the expected amperage can indicate internal degradation.Technicians typically⢠confirm performance with a cold-resistance check and an⢠in-circuit amperageâ measurement during the warm-up phase; âreplacement is âadvised when warm-up time or currentâ draw fall outside the expected range for the appliance model to âavoid repeated valve cycling⢠or safety lockouts.
- Key diagnostic cues: delayed glow, weak glow, repeated clickingor â˘no flameâ despite visible⣠glow.
- Simple tests: continuity for open/short check; in-circuit amperage measurement during warm-up to verify âcurrent draw.
- Compatibility check: confirm mounting style (flat),lead âlength,and âterminal âŁtype âbefore replacement.
| Item | Description |
|---|---|
| typical cold resistance | Approx.⣠40-200 Ί (varies by element⤠design; measure and compare to specification) |
| Typical operating current | Approx. 1.5-3.5 A during warm-up, depending on line voltage and model; â¤measureâ in-circuit |
| Warm-up time | Roughly 10-30 seconds âto reach operating glow, depending on age and voltage |
| Mounting style | Flat⤠oven ignitor, 3-1/4″ element length; âŁensureâ matching flange and terminal type |
Diagnostic â¤Indicators and Common Failure Symptoms of a Flat Oven Ignitor
Theâ 5303935067 Frigidaire Range Flat Oven Ignitor â3-1/4″ is a flat hot-surface ignitor engineered to âreplace the original resistive heating âelement⢠in specific Frigidaire âŁranges. Its flat geometry and 3-1/4″ length determine mounting clearance and terminal fit, so matching these âphysical characteristics is⢠necessary forâ correct installation. Functionally, the ignitor is a resistive element that must reach âŁa high temperature â¤and conduct sufficient line current (typical North American line⣠voltage applied) toâ allow the gas safety valve to open; it does not create a spark or pilot âflame. Compatibility therefore âŁdepends on terminal type, mounting bracket âŁlocationand the ignitor’s thermal/current performance relative to the range’s âŁgas valve requirements.
Diagnostic indicators are â˘primarily operational and electrical:⢠the âignitor should glow visibly and quickly reach operating temperature âwhen a bake/broilâ cycle calls for gas.â Common failure symptoms âinclude prolonged⣠preheat âŁtimes, intermittent lighting, audible clicking without ignition, visible âcracks or pitting on the ceramicand⣠the ovenâ failing to maintain set temperature. Troubleshootingâ combines visual inspection with electrical checks-verify the control calls for heat, confirm line voltage⤠at the ignitor,⤠test for continuity or an âopen circuitand observe âŁwhether the element âŁdraws sufficient â˘heating current; âan ignitor that glows weakly can â¤still be out of spec electrically âand fail to open the âgas valve even âif⣠it passes a simpleâ resistance⣠check.
- No glow âŁ- open element⤠or broken lead; no current⢠flow.
- Weak or slow glow ⢠– reducedâ heating current; may not âŁactuate gas valve.
- Intermittent ignition or âclicking – poor electrical connection or failing element.
- Visible âdamage (cracks, chips, âŁdark spots) â- thermal â¤degradation leading to failure.
- Oven reaches lower-than-set temperature or takes excessive time âŁto preheat – degraded ignitor output.
| Item | Description |
|---|---|
| Visual check | Inspect for cracks, corrosion, brittle wiringand discoloration on the ceramic and âelement surface. |
| Electrical check | Confirm the control âsends voltage when calling âfor heat, test continuityand observe âcurrent draw under operation. |
| Compatibility | Match 3-1/4″⢠length, âflat mounting styleand terminal type toâ ensure proper fit and thermalâ behavior. |
Replacement âConsiderations, Compatibility with Frigidaire Modelsand StepâbyâStep Installation Guidelines
The â5303935067â Frigidaire Range Flat Ovenâ Ignitor 3-1/4″ is a⢠hot-surface ignition⣠element designed to reach incandescence and⣠allow the oven’s gas safety valve to open; it⢠is a resistive ceramic element mounted on a flat bracket so it aligns with â¤the oven burner assembly. Functionally, the⤠ignitor mustâ draw the correct⢠line⣠voltage (typically â~120 VAC in North American ranges) and âsufficientâ current âwhile â˘heating to its operating temperature to permit the gas valve to energize. Compatibility is steadfast â˘by physical length (3-1/4″), flat mounting tab geometryand connector type;⣠technicians âshould⤠compare the âreplacement’s mounting⤠hole spacing andâ twoâprong⢠spade connector to the original unit âand verify theâ part â˘number â¤against⤠the appliance’s âŁservice⤠manual before ordering.
Installation and troubleshooting require⢠both mechanical and electrical checks: verify the element glows brightly âunder applied voltage and thatâ the oven control supplies the expected voltage â¤during the ignition cycle; aâ weak glow or no glow indicates⤠a failed ignitorâ or an upstream electrical fault. âHandle the element by⢠the â˘mounting bracket to avoid contaminating or â¤cracking the ceramic⢠surface, âŁand confirm the wiring harness and âŁground integrity after installation. If the new ignitor does not resolve ignition, âmeasure supply voltage at the harness during a callâ for heat⢠and inspect the gas valve coil continuity and control board outputs as the next diagnostic steps.
- Disconnect power to⣠the range at âthe breaker⣠before starting.
- Remove oven racks and access the âignitor by lifting the oven bottom panel or removing the range back âpanel as required.
- Note and photograph the âoriginal orientation, disconnect the twoâprong spade connectorand remove the mounting screw(s).
- Install the new ignitor â¤by securing the bracket â˘without⢠overâtorquing, reconnecting the harness,â and restoring power for a functional test.
- Observe element glow and listen for the gas valve; if no glow, âŁmeasure voltage at the connector âduring a call⣠for heat.
| Item | Description |
|---|---|
| Part | 5303935067 Frigidaire Range Flat Oven Ignitor 3-1/4″ |
| Length | 3-1/4″ measured from mounting faceâ to tip⣠(verify against original) |
| Mounting style | Flat bracket with âsingle or dual⢠mounting hole-matches flat oven⢠burners |
| Connector | Twoâprong insulated spade (verify polarity and harness routing) |
| Failure symptom | No glow â¤or weak glow; oven clicks but fuel valve does not open |
Q&A
Whatâ is the Frigidaire â¤part⢠5303935067 (Flat Oven Ignitor 3-1/4″) and what does it do?
This is a hot-surface â(flat-style) oven ignitor used on â¤gas Frigidaire ranges. When the âŁoven calls for heat⣠the control sends voltage to âthe ignitor; the ignitor glows red-hot and draws current that signalsâ the âgas âsafety valve to open so gas flows and the burner lights.⤠Without a working ignitor the burner will not light even if â˘gas and the valve âŁare working.
How⣠do I know if âthe ignitor⤠is â˘failing?
Common symptoms are: âoven⣠won’t reach temperature or won’t heat⢠at âall, long glow time before the burner lightsor âthe ignitor glows but the gas valve never opens. âYou may also hear repeated clicking or see â¤the bake burner notâ light.â Aâ visible crack in the ceramic orâ a⢠dim/not-glowing⣠element is also a clear⤠sign of failure.
How can I test the 5303935067 ignitor to confirm it is bad?
Two common⢠tests: 1) Continuity/resistanceâ with a multimeter across the ignitor terminals – âa healthy hot-surface ignitor shows low resistance (not open); an infinite âreading (open) means it’s failed.⤠2) Current draw: with the oven calling forâ heat measure current to the ignitor âwith a clamp meterâ – a⤠working ignitor typically draws on the order of amps (commonly around â3-4 A at 120 VAC); ifâ the element glows but the current is â¤significantly lower the gas valve may notâ open. If âyou’re not comfortable workingâ with live circuits,have a qualified technician perform the live-current test.
Can â˘I replace âthe ignitor myself and what âare the âŁbasic steps?
Yes, if you are comfortable with basic appliance repair and follow safety precautions.â General steps: turn offâ power to the range and shut âoff the gas supply; â˘remove the oven bottom or access panel to reach the ignitor; disconnect the electrical connector and the ignitor mounting screws; transfer any mounting bracket to the new part ifâ required; install the new⤠ignitor, reconnectâ the⤠wires, restore power/gasand test. Avoid touching the ceramic/element surface with bare hands and⣠follow the⤠range manufacturer’s service instructions.
Areâ there any safetyâ precautions I need âto know before replacing thisâ ignitor?
Always disconnect electrical power and â˘shut off the gas before starting. â˘Handle the ignitor carefullyâ – the ceramic is fragile. Do not operate the oven with a damaged or unmounted ignitor. When testing live circuits (voltage/current) use âproper insulated tools and PPE or hire âa technician. Make sureâ all gas fittingsâ are leak-checked afterâ reassembly.
Does the 3-1/4″ measurement matter when ordering⢠a replacement?
Yes.â the 3-1/4″ measurement refers to the element/mounting dimensionâ and helps ensure theâ ignitor will âline up with the burner and mounting holes. Also confirm⢠the connector type and mounting bracket⣠orientation. âAlways match by âOEM part number â˘(5303935067) or check a compatibility list â¤for your specific Frigidaire⣠model to ensure a proper fit.
How long do oven ignitorsâ typically last and can they be repaired?
Lifespan varies⢠with⢠usage, âbut most hot-surface oven ignitors last several years – commonly â˘3-10 years. âFactors include oven use⢠frequency and power cycling. Ignitors âare not repairable in the field; when the element or internal filament fails the common repair âisâ full replacement of theâ ignitor assembly.
Where should I⣠buy a replacement and how do I ensure it’sâ the correct part?
Buyâ from Frigidaire authorized parts distributors,â reputable appliance âŁparts storesor âthe manufacturer’s parts website. Verify compatibility by matching theâ OEM part⤠number (5303935067) andâ your oven’s model number, âŁand confirm â˘the âŁ3-1/4″â flat-style configuration and connector type. Avoid cheap generic partsâ unless they explicitly list compatibility with your model and provide aâ warranty.
Future Outlook
Theâ 5303935067 Frigidaire Range Flat Oven⢠Ignitor 3-1/4″ serves as a small but essential component in gas oven operation,â providing the heat necessary to reliably ignite the âŁburner and maintain consistent oven temperatures. âWhen functioning correctly, this âignitor contributes toâ proper cooking performance,⣠energy efficiency and safe burner ignition; when it degrades, common⤠symptoms include delayed ignition,⣠uneven heating âor failure toâ light, all of which can⢠affect appliance performance and user confidence âin the range.
Accurate diagnosis and timely replacement â˘of aâ failing ignitor are important to restore âreliable operation âand to reduce âŁthe risk of prolonged ignition cycles or gas-related hazards. For â¤best outcomes, follow manufacturer recommendations and safety guidelines, use the⤠correct part â¤number for compatibilityand consider professional service when diagnosis âor installation âis uncertain. Proper replacement helps â¤preserve appliance âperformance, efficiency and â˘longevity.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
