241505301 âFrigidaireâ Refrigerator⤠Door Shelf â¤Bin (2 Liter) â¤is a molded, door-mounted storage bin designed to retain bottles and small â¤containers on theâ interiorâ side of a refrigerator door. As a âuser-facing structural component typically made from injection-moldedâ thermoplastic, it provides âdefined storage⣠capacity â(approximately two âliters) and mechanical âŁattachment points that engage with⢠theâ door⤠liner or dedicated mounting brackets.
Functionally, the shelf bin is part of âthe refrigerator’s door â˘assembly and primarily interacts with the door â˘liner, retention clips or bracketsand⣠the door âsealing system.Even âthough it does not⢠participate inâ the refrigeration cycle, âits â˘condition and fit affect door closure and internal airflow by determining whether the â˘door⢠can seal properly âand whether stored itemsâ are âsecure during âŁdoor âmovement. Mechanical attributes toâ note â˘include load-bearing surfaces, â˘clip geometryand material stiffness; failures in thes areas can âlead⢠to loose mounts, interference âwith âthe gasket,â orâ localized stress⣠on the door liner.
In âthe following article readers⢠will find⣠a technical overview â˘of âŁthe bin’s⢠intended⣠function and dimensional considerations, guidance onâ compatibility⣠with Frigidaire⣠modelsâ and how to verify fit, common failure symptoms⣠to â¤recognize (cracks, deformed clips, retention lossand seal interference), diagnostic checks and simple troubleshooting⤠stepsand⢠practical replacement considerations such as confirming âOEMâ part number â241505301, assessing â˘material and⣠load ârequirementsand ensuring correct clip engagement during installation.
Table⤠of Contents
- Function âand Role âof the Door⣠Shelf â¤Bin in⢠Refrigerator Storage,Load âDistribution,and Thermal Performance
- How⤠the 241505301 Frigidaire Refrigerator Door Shelf Bin (2 âLiter) Works Inside the âAppliance
- Commonâ Failure Symptoms: Mechanical damage,Retention â¤Loss,andâ Door Seal Interference
- Compatibility and Supported Frigidaire âŁModels for the 241505301 Door Shelf â¤Bin
- Replacement Considerations and⤠Step-by-Step⤠Installation Procedure for Door Shelfâ Bin Replacement
- Troubleshooting and Diagnostic Procedures: Fitment verification,Load âŁTesting,and Seal Inspection
- Q&A
- Wrapping Up
Function and role of the âdoor Shelf Bin in Refrigerator Storage,Load distribution,and Thermal Performance
The 241505301 Frigidaireâ Refrigerator Doorâ Shelf Bin (2 Liter) functions âŁas âŁa removable storage⢠module that secures bottles and â˘small containers toâ the inner door surface while transferringâ their loads into theâ door â˘structure. âIt â¤uses molded attachment clips that engage door âŁlinerâ grooves, creating a cantilever support; this means vertical loads and off-center weight are transmitted to the hinge and latch assembly, so repeated â˘asymmetric loading can increase hinge torque and accelerate wear⢠or lead âto gasket misalignment. The bin’s typical molded acrylic⤠or polycarbonate construction provides âŁimpact âresistance and lowâ thermal âconductivity, allowing it to hold standard two-liter containers without meaningful heat conduction⢠into the refrigeratedâ cavity. For âŁcompatibility and serviceability, confirm clip geometry âŁand â¤seat dimensions âagainst the door âŁliner duringâ replacement andâ inspect attachment points âŁfor stress cracks or deformation that would⣠alter load paths.
- Load behavior: cantilevered support transfers torque to hinge and latch-avoid concentrated heavy loads.
- Mounting:â integral⢠clips must fully⤠engage door grooves âfor correctâ seating and alignment.
- Material: rigid plastic â˘resists⤠impact and limits thermal conduction compared⤠with âmetal shelving.
- Maintenance: inspect clips, â¤clearancesand sealing interface; replace if deformed or cracked.
| Item | Description |
|---|---|
| Part number | 241505301 Frigidaire⢠Refrigerator Door Shelf Bin â(2 Liter) |
| Nominal capacity | designed⢠to accommodate standard 2 L bottles or equivalent âcontainers |
| Material | Molded acrylic/polycarbonate (impact-resistant, low thermal conductivity) |
| service note | Verify clip engagement and door groove compatibility â˘during replacement |
Thermal performance âŁis influenced by the â˘bin’s position â¤outside primary evaporator â˘airflowâ and by frequent door openings; doorâ bins operate âat âa higher mean temperatureâ and âŁare subject to⢠ambient cycling, so they are best used for items tolerant of âslightly⤠elevated âtemperatures. Placing high â˘thermal-mass âitems in the âdoor increases localâ inertia⢠butâ does not⤠appreciably alter overall cooling capacity; the⢠more critical effects âare mechanical-blocking âgasket closureâ or shifting âload distribution-which can increase compressor âruntimes indirectly. For practical installation and use, distribute weight â¤evenly⣠across âmultiple doorâ bins, avoid âplacing âmultipleâ heavy bottles in a single binand useâ the OEM-designated⣠bin to preserve designed clearances,⣠seal âpressures,⣠and âpredictableâ thermal behavior.
How the â241505301 Frigidaire Refrigerator Doorâ Shelf Bin (2⣠liter) Works âŁInside the Appliance
241505301 Frigidaire â¤Refrigerator Door Shelf Bin (2 Liter) âŁis an injection-molded thermoplastic âŁshelf designed to mount on â˘the refrigerator⢠door usingâ molded hooks or tab-in-groove rails. the component providesâ a nominal 2âliter containment volume for bottles, jars,⤠and small containers and relies on a retention lip and molded âribs to stabilize loads âduring⣠door motion.â Technically, the â¤part’s function⢠isâ mechanical: â¤it transfers vertical⢠and lateral loads into the door rail via discrete hook engagement points, â¤so correct fitment depends on matching the⤠rail geometry, â¤hook spacingand slot depth â¤on âthe host cabinet rather than on model name alone.
- Mounting: molded hook/tabs that engage door rail grooves
- Load behavior: distributes weight to multiple⣠hooks; point loads increase risk of stress fracture
- Design features: retention lip, molded ribs for stiffness, shallow⣠drainage â˘channels
- Common⣠failure modes:â cracked hooks, bottom warping from impact or âexcessive load
In service,⣠the bin behaves as âŁaâ passive containment and supportâ element-its mechanical integrity determines whether items remainâ secure duringâ door opening and closing. Technicians shouldâ inspect the â¤hooks for hairline cracksâ and measure engagement depth; aâ worn or broken hook⤠will allow⢠the bin âto rock, increasing dynamic loads on remaining hooks âand accelerating failure. For replacement or compatibility checks, âverify the âbracket⣠spacing and hookâ profile âagainst the ârefrigerator door rail; installation typically requires aligning the upper hooks, angling the bin into placeand snapping the lower edge into the rail. As a practical example, swapping a⤠cracked bin for an identical 241505301 unit restores⢠original⣠loadâ distributionâ and fit, â¤while using a non-matchingâ bin with different hook âgeometryâ can produce fit issues or âincreasedâ door torque.
| Item | Description |
|---|---|
| Capacity | Nominal⢠2 liters (physicalâ containment volume) |
| Material | Molded⤠thermoplastic â˘(stiffening ribs for load resistance) |
| Mount style | Molded hooks/tab-in-grooveâ engagement with door rail |
| Failure modes | Hook fracture, bottom warp, stress cracking from point loads |
Common Failure Symptoms: Mechanical Damage, retention Lossandâ Door Seal Interference
241505301 â˘Frigidaire Refrigerator Door Shelf bin â(2 Liter) âis a molded door-mounted storage bin âŁthat secures bottlesâ and small âcontainers to âthe⤠inner face of theâ refrigerator⢠door. The âpart relies on a snap-in âmounting interface and molded retention tabsâ to⣠provide verticalâ and lateral restraint; mechanical damage âtypically appears as cracked or sheared tabs, hairline fractures âthroughâ the bin bodyor âŁdeformation âfrom âimpact or sustained overload (for⤠example, repeatedly storing oversized bottles). compatibility dependsâ on matching⢠the door â¤rail groove geometry and âŁclip spacing-technicians should âverify clip engagement and ârailâ profile â˘before âassuming interchangeability with other bin designs.
Retention loss and door seal interference manifest as increased play, rattlingor aâ bin âthat will notâ fully seat; a partially seated bin can prevent the door from closing flush, â¤producing a persistent âwarm-air leak, accelerated frosting, â˘or higher compressor duty cycles. Diagnostic steps include âŁa visual inspection for tab loss or plastic creep, a manualâ flex test to check for â¤excessive deflection, âŁand a fit check to confirm fullâ engagement of both mounting⤠clips. Practical remedies âŁrange from replacing⢠the damagedâ bin with the correct 241505301 unit to temporarily securing âa looseâ binâ with⢠a non-permanent clip untill replacement parts arrive.
- Cracked or missing retention tabs⣠– bin falls out or tilts forward
- Excess âvertical or lateral â˘play – causes rattlingâ and poor load retention
- Partial seatingâ against door frame – door⢠seal compression reduced,leading to âŁsealâ interference
| Item | Description |
|---|---|
| Mounting â¤interface | Snap-fit retention tabsâ that engageâ a door rail groove; confirm clip geometry for compatibility |
| Common âfailure mode | Tab fracture,body cracks,or âŁplastic creep fromâ overload or impact |
| Quick diagnostic | Visual tab inspection,manual flex test,and âfit-check âŁfor full seating⢠without gap at âthe door seal |
Compatibility âŁand Supported Frigidaire models âfor the 241505301 Door Shelf Bin
The 241505301 Frigidaire Refrigerator Door Shelf bin â(2 Liter) is â¤a molded â¤polyethylene door bin engineered to accept⢠standard â2âliter bottle⤠footprints and to engage Frigidaire-type âdoor rail profiles. Compatibilityâ is determined primarily by the bin’s mounting âhook geometry, overall âŁwidth and depthand the lip/profile that captures âthe door⣠rail; units that listâ 241505301 âin their âŁparts â¤lists orâ that share âthe⢠sameâ rail-and-clip architecture will accept âŁthis bin â˘as aâ direct replacement. Technicians âŁshould âverify that the bin’s hook spacing and hookâ angle match the âŁrefrigerator door rail beforeâ installation, as small differences in hook offset or â˘rail thicknessâ prevent proper seating â¤even when external dimensions appear similar.
Practical compatibility checks focus on measurable features rather than brand name alone. Use these âsteps to confirm fit andâ function before purchasing or installing: examineâ the existing âbin’s snap-tab âŁcondition,â measure mounting hook center-to-center âspacing and binâ depth, âand compare⢠the door rail profile for matching engagement geometry. Typical failure modes⣠that⤠affect⣠compatibility areâ fractured mounting tabs, warped mounting hooks from heat exposureor âdoors⣠that âuse proprietary âcaptive clips; replacing âa damaged rail⢠clip⤠or â˘selectingâ the exact part⤠number⢠from⣠the manufacturer parts listâ avoids misfit. â¤Belowâ are quick⢠reference â¤items to measure and compare before confirming compatibility.
- Confirm manufacturer part number or match mounting hook spacing.
- Verify overall width and depth âmatch the door cavity and âadjacent shelves.
- Inspect rail profile and clip engagement geometry for proper snap retention.
| Item | Description |
|---|---|
| Mounting⢠hook spacing | Measureâ center-to-center distance of hooks âŁon the bin and compare toâ rail slot âŁcenters on⤠the door. |
| Bin depth | Check front-to-back depth â˘to⤠ensure âŁa 2âliter bottle clears internal door stop and⤠adjacent bins. |
| Hook geometry | Confirm hook âangleâ and lip thickness engageâ the door rail without requiring forceful flexing. |
Replacement⤠considerations â˘and Step-by-Step Installation⤠Procedure for door Shelf⢠Bin Replacement
241505301 Frigidaire Refrigerator⣠Door⣠shelf Bin (2 Liter) functions as âa⣠removable, snapâfit storage component designed toâ hold bottles and small containers within the refrigerator âdoor. The binâ is âtypically molded from rigid âABS plastic and engages the door via molded retention tabs âthat âŁslide into or clip onto horizontal doorâ rails; correct engagement ensures predictable load transfer to⢠the door âŁstructure âand prevents rattlingâ or sagging. Compatibility is â˘determined âby the rail â˘spacing and âtab geometry⤠on the door – thisâ part will fitâ only doors that accept the same tab pattern and bin depth, soâ verify the refrigerator model or compare mounting âfeatures â(rail position,⢠number of tabsand clip profile) before replacement.
For âŁreplacement,â inspect⢠the door railsâ and the⣠existing bin for broken tabs, plastic deformationor accumulated debris that can prevent full engagement. Installation⢠requires âminimal tooling;â a small âŁflat â˘screwdriver or plastic trim tool canâ help â¤release âŁold clips andâ guide âtabsâ without damaging âpaint. After seating the new â¤bin, verify that the bin’s âtop edge clears the âdoor sealâ and that the door closes âfreely under load; if the bin does not snap in⢠with moderate pressure, reâcheck âalignment and rail⢠condition to avoid overstressing the âtabs or creating an uneven load path.
- Highâlevel â¤installationâ steps: remove old bin, clean rails,â align âlower tabs, engage upper lip or push âinto â˘railâ until audible click, test retention and door closure with a typicalâ load.
| Item | Description |
|---|---|
| Tools | None required; âoptional flat screwdriver â˘orâ plastic trim âŁtool forâ release and cleaning |
| Material | Rigid ABS plastic; snapâfit retention tabs |
| Compatibility âcheck | Match doorâ rail spacing, tab countand⢠clip âŁprofile⢠rather than fridge model number alone |
| Common failure modes | Broken or worn tabs, distorted rails, debris buildupâ preventing âŁfull â˘seating |
Troubleshooting⢠and Diagnostic Procedures:⢠Fitment verification, Load Testingand Seal Inspection
The 241505301 Frigidaire Refrigerator Door Shelf⣠Bin (2 âLiter) âshould be inspected for correct mechanical engagement and dimensional⣠compatibility âbefore âconcluding that a door storage issue⣠is part failure. Start by⣠locating theâ mounting tabs and measuring the spacing against âthe⤠refrigerator door rail pockets;⣠typical âservice tolerances are on the order ofâ Âą1-2 mm for tabâ pitchâ and channel width. Visually â˘inspect the bin for â˘cracks, stress whiteningor deformed mounting hooks â¤that would âprevent full seating. Cross-reference the unit with the appliance model â¤number in âŁthe service manual or âparts diagram to confirm that rail⤠geometry⤠and retention⤠features match the replacement⤠bin, as bins â¤with similar⤠appearance⤠can âhave different clip profiles and load capacities.
Perform a simple load testâ and seal inspection to diagnose performance â˘problems: â¤apply a progressivelyâ increasing staticâ load⢠equivalent â¤toâ typical use (for example, a full 2 L bottle plus additional⣠items) and observe forâ permanent deformation, slippage,⤠or audible creaks at⤠the âmounting interface. âCheck for âinterference between the bin flange and âthe door gasket or liner that could prevent full closure or create localized stress points; softening or â˘edge wear around the seat often indicates cyclic overload or chemical exposure. Use theâ checklist below â˘to systematize theâ diagnosis âand the reference table for typical tolerance and failure-mode expectations.
- Fitment verification: measure tab spacing andâ channel depth, confirm â¤full engagement without force.
- Load testing: âŁapply â˘known weights,⢠measure⣠deflection with a ruler or calipers,â inspect⢠forâ cracks âpost-test.
- Seal/interface inspection:⤠inspect gasket contact, verify no obstruction between âbin flange and door liner.
- Symptoms to note:⢠sagging under âload,intermittent detachment,visible cracks⣠at mount points.
| Item | Description |
|---|---|
| Typical tab â˘pitch tolerance | Âą1-2 mm relative⢠to door ârail⤠pockets |
| Recommended âstatic test load | Equivalent to⤠a 2 L bottle + 0.5-1 kg âfor lateral safetyâ margin |
| Common failure modes | Cracked mounting âhooks,deformed â¤channel lips,wear â¤atâ gasket contact points |
Q&A
What is the âFrigidaire part â˘241505301 and âwhat doesâ “2 Liter” mean?
part 241505301 is a refrigeratorâ door shelf bin⢠(also called a door⢠dairy or gallon bin) âsold for Frigidaire refrigerators. “2 Liter”⣠indicates the bin is sized to â¤hold standardâ 2âliter bottles (soda âor similar), âsoâ it âŁis larger â˘than small condimentâ bins and âdesignedâ for tall, wide containers.
Which Frigidaireâ models is part 241505301⤠compatible with?
This OEM part is used on âa range of â¤Frigidaire, âFrigidaire Gallery and some Kenmore models. Compatibility varies âby model and year, so âŁalways verify fit by entering â¤your refrigerator model number on Frigidaire’s parts lookupâ or a trusted parts â¤seller. Do â˘not rely solely â¤on refrigeratorâ size-confirm the partâ number or model-specific parts diagram.
How âŁdo I remove âandâ install the door⤠shelf bin?
most âFrigidaire â¤door bins remove without tools: open the door fully, lift the bin slightly toâ unseat theâ rear lip, âthen⢠pull forward and out. To install, align the rear lip with the door liner track, âŁangle the front up and âpress⤠down until it⤠snaps⢠into place. Some models use small retaining â¤screws or clips-if present, remove the screws first â˘and reinstall them after âseating the bin.
What should I do⣠if the âbin is cracked or âbroken-can it⣠be repaired?
Minor hairline cracks âcan sometimes âŁbe temporarily stabilized with âfoodâsafe⣠epoxy,⣠but repairs are⤠generally not permanent and â¤may harbor â¤bacteria. âŁFor safety and⣠longevity,replacementâ with the correct OEM part â(241505301) is ârecommended. Avoid tape or glues that⢠are not rated for â˘food contact.
How do I clean the door âshelf bin safely?
Removeâ the bin and wash âŁwith warm soapy⣠water using a soft cloth âŁor sponge. Rinse and dry thoroughly. Avoid abrasive âscouring pads and harsh â˘solvents (acetone,⤠oven cleaners) that can damage or discolor the plastic. Check your manual before usingâ a dishwasher-high⤠dishwasher temperatures or drying⣠cycles can warp some plastic bins.
Are thereâ weight âŁlimits or loading tips for this bin?
The bin is designed⢠for⢠typical door items such⤠as 2âliter bottles, condiments and dairy containers. âdo not overload theâ bin with heavy jars or⢠multiple full â˘bottles; excessiveâ weight âcan stress the mounting tabs and cause âŁcracking⢠or failure. Distribute weight evenly and avoid stacking very heavyâ items on âa single bin.
Can I substitute an âaftermarket or worldwide bin instead of buying the OEM 241505301?
Aftermarket⤠or universal bins⢠may fit and can be less⣠expensive, but fit, finish and mounting⤠tab alignment can differ. OEM⢠part 241505301 is guaranteed to match the âŁoriginal fit and appearance. If choosingâ aftermarket,â confirm dimensions and mounting style against your â˘doorâ liner and check seller reviews âand⣠return policy.
How do I order aâ replacement and ensure I get the â˘correct part?
Locate your refrigerator âmodel âŁnumber (usually onâ a sticker⢠inside the âŁfresh food compartment â˘or on â¤the⣠door frame). Use that model number on âŁFrigidaire’s âofficial parts site or an authorized parts distributor⤠to searchâ for⣠241505301 or replacement part listings.â Check photosâ and⣠dimensionsand verify the seller’s⢠return âŁpolicy and warranty before purchasing.
Wrapping Up
The 241505301 âFrigidaire Refrigerator Door Shelf Bin â(2 Liter) serves âa straightforward but important function in refrigerator⤠organization and food safety. Designed to hold small âcontainers, âŁbottlesand â¤condiments, this 2âliter door bin maximizesâ usable space, prevents loose items⣠from shifting during door openingand helps maintain an âorderly interior that supports âconsistent cooling⢠and⤠reduced spoilage.
Proper â˘diagnosisâ of problems-suchâ as cracked⢠plastic,â broken mounting tabs,⤠or warping that prevents a secure fit-is essential before deciding to ârepair or replace the bin. Replacing a damaged shelf bin restoresâ reliable â¤storage capacity, reduces the risk of spills âŁand contaminationand helps⣠preserve the â¤appliance’s overall âfunction. Inspecting theâ part number, â˘fitand condition ensures âthat the replacement will perform as intended.
When replacement is necessary, choosing the âŁcorrectâ 241505301 part or âa â˘verified âŁcompatible âchoice â˘and following recommended⣠installation and safety instructions will â¤deliver⢠the best results. Routine cleaning, careful loadingand timely âreplacement of⤠worn âcomponents⣠are costâeffective measures â¤that âŁmaintain refrigerator performance and prolongâ the life of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
