316112005 Frigidaire Oven Range Anti Tip Bracket⢠Kit is a mechanical anchoring assemblyâ designed âto secure the rear of a freestanding or⢠slide-in⤠oven/range to the floor or wall structure. â˘The kit functions as â˘an âanti-tip device, typically consisting of a stamped âŁsteel bracket, âfasteners adn appropriate anchorsand isâ classified as a safety ârestraint component rather âthan an âactive functional element⢠of the appliance. As a hardware accessory it provides aâ fixed engagement point that interfaces with the range chassis or⤠leveling leg to limitâ forward rotation of the appliance under applied⤠loads.
In service, the anti-tip bracket controls the range’s kinematics whenâ subjected to user-applied loads (for example, âŁa âfullyâ extended oven door or aâ person standing⤠onâ an open door) by transferring â¤tipping moments into the building structure via its fasteners â¤and anchors. It therefore interacts mechanically with the â˘range frame, the leveling leg or âŁrear support footand the substrate (wood floor, concrete slabâ or âwall studs) to âresist shear and pulloutâ forces. Proper selection⢠of anchor type, fastener lengthand attachment location⢠is critically important as load âpaths, bracketâ orientation and mounting â˘surface strength determine the effective â˘capacity of âthe restraint âand its susceptibility âto common failure modes suchâ as â˘fastener pull-through, bracket deformationâ or improper â˘engagement with⣠the â˘range rear âlip.
This article will cover the â˘intended function⢠ofâ the 316112005 anti-tip bracket, typical points of compatibility and⤠mounting variations forâ different âŁFrigidaireâ freestanding and⢠slide-in ranges, common failure â¤symptoms⤠to look for (looseness, movement when⢠the door is opened, visible fastener damage),⤠basic troubleshooting checks to verify⤠engagement â˘and anchorageand replacement considerations including anchor âŁselection and installation clearances. The goal is to provide technicians, engineers and appliance owners with the technical context needed toâ assess condition, confirm âproper⢠installationand select an⣠appropriate replacement âwhileâ following⤠manufacturer installationâ instructions and applicable site âconstraints.
Tableâ of Contents
- Function and â˘Load-bearing Role âof the â˘Oven Range âAnti-Tip Bracket
- How the 316112005 Frigidaire Oven Rangeâ Anti Tip bracketâ Kit âInterfaces with Range Chassis, Floor âAnchoringand Weight Distribution
- Common Failure Symptoms and Mechanical Indicators ofâ a compromised Anti-Tip Bracket
- Replacement⢠Considerations âand Installation Procedure: Mounting, Fastener Specificationsand Alignment Verification
- Q&A
- Wrapping Up
Function andâ Load-Bearing Role of the Oven Range Anti-Tip⢠Bracket
The 316112005⢠Frigidaire âOven â¤Range âAnti Tip Bracket Kit secures the rear⢠of a freestanding range to the structure of the home so⢠that the⣠appliance â˘cannot rotate forward under an applied overturning moment.â Functionally the bracket creates âa positive engagement point for the range’s â¤rear âleveling legâ or a dedicated tab, converting âŁdoor- or load-inducedâ moments into tensileâ and shear â˘forces carried by âŁthe fasteners and the building substrate. In â¤normal⤠operation the bracket does not â¤carry the âstatic weight âŁof the oven; instead â¤it restrains dynamic and eccentric loads such as a⤠fully open, loaded oven doorâ or âŁsomeone⣠leaning on the â¤open door, preventing the ârange from âpivoting off âŁits front feet.
From a load-bearing viewpoint the⣠anti-tip bracket⣠relies onâ proper anchorage and alignment: the bracket must be fastened into a structural element (floor framing, subfloor backing,⤠or concrete slab) with â¤appropriate fasteners so that the âshear⢠and pull-out capacities of the⢠anchors exceed the expected⣠overturning forces. Compatibility depends⣠on the â¤range âŁrear-foot geometry and clearance⣠to the âŁwall-some âinstallations require repositioning the leveling leg into the bracketâ or using the kit’s mounting holes to align with the cabinet or âfloor âstructure. Practical examples⢠include⣠installing into a â¤wood âsubfloor over a joist using lag screws,or into âŁmasonry withâ sleeve anchors; conversely,anchoring âonlyâ to finished flooring⢠or lose substrate will not provide the âdesigned resistance and should be corrected.
- Primary function:â prevent forward rotation/overturning under eccentric loads.
- Load path: ârangeâ rear foot â âbracketâ body â fasteners â structural substrate.
- Installation considerations:â anchor type, â¤embedmentâ depthand alignment⢠withâ levelingâ leg.
- Inspection/maintenance: verify fastener âŁtightnessâ andâ engagement after flooring changes or appliance relocation.
| Item | Description |
|---|---|
| Material | Steel bracket â˘designed to⢠resist shear and tensileâ loads â¤fromâ overturning moments |
| Mount type | Fixed âanchorage to structural âsubstrate (floor⢠joist/blocking or concrete) |
| Function | Limit range rotation â˘byâ capturing rear leveling âleg⤠or dedicated engagement tab |
| Compatibility | Intended for Frigidaireâ freestanding ranges that align with the bracket’sâ mounting âŁgeometry; verifyâ fit âbefore final installation |
How the 316112005 Frigidaire Oven Range Anti Tip Bracket Kit Interfaces âwith Range âChassis, Floor âŁAnchoringand Weight Distribution
316112005â Frigidaire âOven Range⤠Antiâ Tip Bracket Kit providesâ a âmechanical interface between the range chassis and the⢠finishedâ floor âŁby creating âŁaâ fixed rear ârestraint point that âengages â˘the appliance’s rear skirt or leveling leg. The bracket âfastens âŁto the floor⣠and captures âŁor abuts a âŁdesignated chassisâ point so thatâ any⣠rotational â˘force âgeneratedâ when the door is openedâ orâ when load is â¤applied to âthe âfront⢠of the range âis transferred âŁinto âthe⢠floor-mounted fasteners.â In practiceâ this âmeans the bracket âŁis located relative⤠toâ the range’s rear chassis flange or âŁleveling leg; proper âŁpositioning â˘ensuresâ that âtipping moments âŁare converted into shear andâ tensile âloads on âthe bracket/fastener âŁassembly rather thanâ being carriedâ by the range cabinet seams âor the cooktop supports. Installers shouldâ verify the bracket aligns with the model-specific chassis attachment âlocation and that anyâ kickplate, leveling legor rear⣠trim is not preventing fullâ engagement.
- Mounting interface: rear chassis flange or leveling â˘leg engagement
- Fastener âŁselection: â˘timber screws/lag bolts for âŁjoists,sleeve⢠or âwedge anchors for concrete,toggle anchors âfor⤠hollow floors
- Function: resists âŁoverturning âmoment â˘(not intendedâ to bear â¤the⣠full static âweight of the⤠appliance)
- Verification:⤠secure fasteners âand apply⢠a forward force on the range to confirm â˘restraint
| Item | Description |
|---|---|
| Mounting point | Rear chassis flange or rear leveling âleg / bracket interface |
| Typical fasteners | Wood screws/lag bolts,masonryâ anchors,or toggle bolts dependingâ on â¤substrate |
| Load effect | transfers tipping moment into shear/tension⣠on fasteners and compressive load into floor |
| Compatibility | Requires a clear chassis engagement⢠point; âplacement âmay âvary by Frigidaire model |
Floor anchoring and weight âŁdistribution â¤are⤠interdependent: the bracket itself âis a⤠restraint â˘designed to prevent âŁrotation about the âfront âŁedge,not a â˘bearing surface for âŁvertical âloads. On a solid âconcrete âŁslab, âuse an appropriate masonry⣠anchor sized to resist shear â˘and pull-outand⣠on⣠wood âsubfloors locate a joist and use a âlag bolt to achieve the same âresistance;⤠in homes⤠with crawlspaces or hollow platforms, aâ toggle orâ crossâanchor that spreads load behind the substrate is preferred.Because⣠the anti-tip â¤system âresists âŁan⢠overturning moment, installers should also ensure âthe range isâ properlyâ leveled and that â˘the rear foot or â˘leg engages the bracket without preload that could induce stress on⢠the chassis; after installation,â a âfunctional test â(applying forward force âŁat the countertop level and confirming no rotation) verifies that⣠the bracket, fastenersand floor substrate âtogether provide the intended protection for âthe âŁappliance’s center-of-gravity shift duringâ normal use.
Common Failure⣠Symptoms⢠and mechanical Indicators of a⤠Compromised Anti-Tip Bracket
The 316112005 â˘Frigidaire Oven Range Antiâ Tipâ Bracket âŁKit is a mechanical â¤anchoring assembly that mates to theâ range rear â¤frame and the finished â¤floor âŁor cabinet to prevent the⢠appliance fromâ pivoting when a front load is occupiedâ or force is applied to the â¤open door.The bracket is designed to âengage the range’s rear â˘leveling âleg or a dedicated âtab on compatible Frigidaire modelsâ and relies on âproper fastener selection forâ different substratesâ (woodâ subfloor, concrete, tile). Compatibility is⢠persistent by the range⤠rear-frame geometry and theâ mounting fastener length/type; technicians â˘should verify the bracketâ seat⤠and screw engagement depth against⢠the appliance âŁmodel âand â˘floor construction before declaring a fit or â¤installing⣠alternate anchors.
- Excessive fore-aft movementâ of âthe âŁrangeâ when pushed from the âŁtop or front
- Missing, looseor stripped fasteners⣠at⣠the bracket attachment âpoints
- Visible â˘bending, cracked weldsor⤠elongation of the⢠bracket or mounting holes
- Gap âunder the rear edge of the range indicating the bracket no longer engages â¤the leg
- Audible creaks or metal-on-metal⣠contact during normal door âŁoperation
| Item | Description |
|---|---|
| Visible gap â˘at rear | Indicates â˘disengaged â˘bracket âorâ incorrect leg height; â¤can allow tipping under load |
| Deformedâ bracket | Permanent âbend â¤or cracked welds requireâ replacement of â˘the bracket â¤or kit |
| Elongated screw holes | Fastener pull-throughâ reducesâ shear capacity; repair via new anchors â˘or substrateâ reinforcement |
Practical inspection combines a visual check with a controlled stability test:â with the range⢠empty â˘and power/gas â˘isolated, verify fastener torqueâ and that the bracket seat fully captures the rear leg/tab;⢠if â¤the bracket âŁis bent, welded âŁjoints are compromised,â or screws are missing/stripped,â replacement with an appropriate kit and â˘correct anchor hardwareâ is required. After flooring changes or range repositioning, recheck engagement â¤and fastener length â˘because a properly installed anti-tipâ bracket only⤠functions when the â¤bracket âgeometry, screw penetrationand substrate are⤠all within âspecification.
Replacement⢠Considerations and Installation Procedure: âMounting,⢠Fastener Specificationsand Alignment Verification
The 316112005 Frigidaire Oven⣠Range âŁAnti Tip Bracket Kit is a mechanical retention device intended to prevent â˘forward tipping of a â˘freestanding ârange by capturing the rear⣠leveling leg or engaging a floor/cabinet mounting surface. â¤the bracket âtransfers tipping loads into a structural substrate; therefore â˘compatibilityâ depends on the cabinet construction, âfloor material, âandâ the range rear-leg geometry. Before replacingâ or installing the bracket â¤verifyâ that the substrate â(solid wood framing,plywood cabinet base,orâ concrete â˘slab) can accept the âspecified â˘fastener embedment and that the range rearâ leg⣠aligns with⣠the bracket â¤mounting point when the â¤appliance is âŁfully⢠pushed back against âŁthe wall.
- Locate the bracket so the â¤range’s rear âfoot engages the bracket bar at⤠the maximum backward position; âmark fastener⤠locations on the substrate and confirm clearances⣠for wiring and⤠gas lines.
- Use fasteners appropriate to the substrate: âwood screws âor⤠lag screws for timber/cabinet,⣠masonry anchorsâ for â¤concrete,â and toggle âor â¤self-drilling anchors âŁfor âŁhollow metal studs.
- After⣠securing âthe bracket, push the ârange back until âthe rear legâ engages,â then verify⤠engagement by â˘pulling forward on⣠the rangeâ and checking that the⤠bracket âarrests movement.
| Item | Description |
|---|---|
| Wood/cabinet â¤fastener | 1/4″-5/16″ âlag screw or â#12 wood screw with minimum 1.5″ embedment (â38 mm) |
| Masonry fastener | 3/16″-1/4″ masonry anchor with minimum 1.5″ embedment or a âconcrete âŁscrew per â¤manufacturer specs |
| Metalâ stud fastening | Spring-toggle âŁanchor or â˘self-drilling sheet-metal screw with compatible anchor rated for lateral âload |
| Pilot âhole / torque | Pilotâ hole per âŁfastenerâ manufacturer; tighten snug-avoid over-torquing (typical hand-toolâ torque ranges for these fasteners are 10-25 ft¡lb depending onâ size and anchor) |
during installation,ensure âŁat least one full thread or anchor-specified embedment âis achieved into solid⣠material; when attachingâ into thin cabinet face⢠or hollow spaces,supplementâ with â˘backing block or repositionâ to a structural member. Align â˘the bracket so that the rear leveling leg âbottoms out on the bracket bar⢠with âtheâ range âboth level⣠and pushed back; use a âspirit level⢠across the cooktop and a straightedge at the rear to âconfirm⣠noâ rotationâ or âŁskew. Perform a âfunctional check âby âapplying steady forward âpressure at the top front edge of the range to confirm âthe bracket arrestsâ forward âmovement, then⢠recheck âfastener⢠tightness⢠and re-inspect for âany â¤substrate deformation or loosened⣠anchors â¤after initial â¤load testing.
Q&A
What is the 316112005 Frigidaire âoven Range Anti⣠Tip Bracket Kit and why⤠is it⢠important?
The 316112005 âŁkit isâ theâ antiâtip device âsupplied for many Frigidaire ovens and⤠ranges. it secures the âback âof the range to the floor⣠or wall so the appliance cannot tip forward âwhen weight âisâ placed on an open âŁoven door.â This⣠prevents â˘burns, scalds â˘and⤠crushing injuries and is a recommended âor â˘required safety device by manufacturers and many building codes.
Which Frigidaire models⤠will this antiâtip â˘bracket â˘fit?
The 316112005 is intendedâ for use with a range of âFrigidaire ovens and⢠ranges, but compatibility canâ vary by model and installation layout. Always check the range âowner’s manual or the Frigidaire parts lookup for your exact model â˘number to confirm compatibility before purchasing.
Do Iâ need any âspecial toolsâ to install the â¤antiâtip âŁbracket?
Typical tools required âare⤠a screwdriver orâ drill/driver, appropriate drill bits for the substrate (wood or âmasonry), a stud finder, âtape measure, penciland possibly a socket orâ wrench.â Safety gloves and eye âprotection are recommended. If the installation requires masonry anchors or special fasteners,⣠use the correct drill bit and â˘anchors for concrete or tile⤠floors.
Canâ the bracket be mounted to a wall âstud, tileor concrete floor?
Yes.The bracket âcan be secured to a wood wallâ stud, aâ solid wood flooror with âappropriate anchors into concrete âor masonry. For tile or âhollow walls, use âanchors⤠rated for the load and follow the manufacturer’s instructions. If you are unsure⣠which anchor â¤isâ appropriate⢠for your substrate, consult a professional installer.
How do I install the bracket (basic steps)?
General installation steps: 1) âpull the range away⢠from the wall and unplug or turn off utilities as needed.2) Locate and mark aâ suitable mounting point on the wall stud or âfloor per âthe instructions. 3) Fasten⣠the antiâtip bracket securely âto the stud or floor using â¤the recommended âfasteners.⣠4)⢠Slideâ the range back so⤠the range’sâ rear antiâtip tab engages⢠the bracket. 5) Verify⢠engagement by gently pulling âthe âŁtop â¤of the⢠open door- âthe range⣠should not tip. Always follow the stepâbyâstep â¤instructions included âwith the kit.
Is installation required⤠or just recommended?
Most manufacturers, including Frigidaire, require â˘an⣠antiâtipâ device to be installed â˘as partâ of the safe installation of⤠a ârange. Local buildingâ codesâ or safety regulations mayâ also require it. Even if not legally â˘mandated in your area, âinstallation is strongly recommended to prevent hazardous tipping âŁincidents.
How â˘do⢠Iâ remove⤠or disengage the â¤bracket⤠forâ service or moving âthe ârange?
To service or move the range, support the appliance to prevent tipping, â˘then eitherâ lift the⢠rear âŁslightly âto disengage â¤theâ range’s rear foot/tab from â˘the bracket or âŁremove the bracket fasteners.⢠Someâ installations are designed so you can tilt the⤠range forward a little âand pull itâ away without fully removing the â˘bracket. follow⣠the manufacturer’s instructions and shut off⣠gas or electricity if â˘disconnecting utilities.
What if the bracket âhardware is missing⣠or damaged-can I replace parts separately?
If screws,â anchorsor the â˘bracketâ itself⣠are missing âor damaged, replace â¤them⢠with parts that meet or exceedâ the âoriginalâ specifications. Use manufacturerâapproved replacement parts when⣠possible.If you cannot find exact Frigidaire âparts, choose equivalent heavyâduty anchors and screws rated for theâ load and substrateand verify compatibility with⢠the range’s antiâtip tab. When in doubt,contact Frigidaire or a qualified â˘appliance technician âfor replacement parts and⣠guidance.
Wrapping Up
Theâ 316112005 frigidaire âOven Range Anti tip Bracket Kit serves a fundamental safety function by anchoringâ ranges to the⢠wall âand reducingâ the â¤risk ofâ tipâover incidents. As an OEM âcomponent designed for compatibility with Frigidaire ranges, the bracket kit helps maintain appliance stability âunder normal⣠use and during âthe⣠stress â¤of loading or movement. Though small and unobtrusive, â˘the⣠bracket â¤is a criticalâ element in preventing â˘injuries and property damage âassociated⤠with ârange tipping, notably in households â¤with children or pets.
Because of its safetyâ role, proper diagnosis of any stability issue⤠and timely replacement of â¤a damaged, corrodedor missing bracket â˘are essential. Owners and service professionals should assess range anchoringâ as part of routine maintenance â¤and replace the bracket âwithâ the specified 316112005 kit when necessary toâ restore the⤠intended level âof protection. Adhering âŁto manufacturer guidance â˘and ensuring a correct, âsecure installation helps preserve â˘the appliance’s safe operation andâ minimizes the ârisk of tipâover incidents.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
