240351240 Frigidaire Refrigerator crisper Pan⤠is a molded drawer pan designed to form the base of a refrigerator’s crisper/drawer â¤assembly; it is a structural, serviceable component⤠that⢠supports stored produce, contains moisture and minor spillsand interfaces with the drawer âtracks and cabinet floor.â As a discrete replacement part⣠identified by its OEM ânumber, the panâ is typically made from a âdurable âthermoplastic and â¤is shaped to fit specific cabinet geometry and mounting features such as rear tabs, front ledges, âand track grooves.
Inside the appliance,the â˘crisper pan functions as part of the fresh-food storage subsystem and interacts mechanicallyâ and thermodynamically with the⤠cabinet liner,drawer⣠slides,humidity-control inserts,and local airflow paths created by return vents⤠or baffles.Its dimensional fit affects drawer seal and alignment, its rim andâ drain features manage incidental condensate or food juicesand its placement influences localized humidity retention within the crisper drawers; damage or misfit can therefore lead to compromised drawer operation, increased soiling of the cabinet interioror âaltered airflow that affects temperature and âhumidity control near stored produce.
This article will describe the pan’s intended function â¤and⤠theâ specific systems it â˘interfaces with, outline compatibility considerations and how to verify correct part âŁnumbering â¤and fit, list common failure modes and symptoms toâ watch for⤠(cracking, warping, improper seating, persistent leaks or drawer binding)and provide practical troubleshooting and replacement⣠guidance for technicians, â¤engineersand appliance owners, including inspection points, measurement âchecksand installation considerations to ensure reliableâ operation after service.
Table âof contents
- Function and Role of the 240351240 Frigidaire Refrigerator Crisper âPan in Climate and Food Preservation
- How the 240351240 frigidaire Refrigerator⤠Crisper Pan Works Inside the Appliance:⤠Airflow, Drainageand Seal Interfaces
- Common Failure Symptoms and⤠Diagnostic âIndicators⢠for Crisperâ Pan Damage, Leaksand Performance Degradation
- Compatibility, Replacement Considerationsand â¤Installation Procedures for Frigidaire âŁModels and⢠Aftermarket Alternatives
- Q&A
- Key Takeaways
Function and Role of the 240351240 Frigidaire Refrigerator âŁCrisper Pan in Climate and Foodâ Preservation
The 240351240 frigidaire Refrigerator⢠Crisper Pan is⢠aâ molded tray that forms the base ofâ the⢠crisper drawer assembly and serves⢠as a moisture-management â¤and â˘structural componentâ in the refrigerator compartment. Functionally, the â˘pan collects condensate andâ channels âit to a âdesignatedâ drain or evaporation path, while its molded vents and mounting tabs control airflow under the drawer⤠to create a higher-humidity microclimate above the pan; this controlled humidity â˘reduces water loss from high-transpiration⣠produce.Technically, the panâ interacts with the âdrawer slide rails, sealingâ lipsand any adjustable humidity âŁslider: correct dimensional âfit,â intact mounting tabs, â˘and unobstructed venting⢠are required for predictable airflow patterns andâ to⤠prevent pooling or bypass that would degrade preservation performance.
- Material and durability:â usually polypropylene or â¤ABS to resist cold âcracking and standing â¤water.
- Functional features: molded âdrain channels, ventilation slots, mounting tabs,⤠and a flat catchment area for condensate.
- Common failure modes: hairline cracks, warped⤠flange, âclogged drain channelor broken tabs causing leaks or loss of humidity control.
- Compatibility check: verifyâ drawer⤠geometry and part number match to âensure vents and⤠drains align with the refrigerator chassis.
| item | Description |
|---|---|
| Primary function | Collect â˘condensate and create⤠a âŁcontrolled â¤high-humidity zone beneath the crisper drawer |
In practical terms, âthe pan’s presence changesâ the local⤠climate â˘by⤠increasing relative humidity âand reducing direct convective airflow across⤠stored produce; leafy âgreens kept in a functioning pan willâ lose moisture more slowly âthan inâ an⢠open âshelf situation, while ethylene-producing fruits may still require âseparate drawers orâ vents to avoid âaccelerated ripening.â For technicians and appliance owners,inspection âand maintenance stepsâ that preserve function â˘include clearing the drain path,confirming the pan sits level and engages its mounting âpoints,and replacing warped or cracked pans to restore the intended airflow and condensate routing-failure to addressâ these issues leads to visible symptoms such as âpooled âwater in⣠the âcompartment,increased frost,or premature softening ofâ vegetables.
Howâ the 240351240 Frigidaire âRefrigerator Crisper⢠Pan Worksâ Inside the Appliance: Airflow, Drainageand Seal Interfaces
The 240351240 Frigidaire â˘Refrigerator Crisper Pan functions as both a â¤physical support for â¤the crisper drawers and⢠as a controlled pathway for ârefrigeration airflow and condensate âŁmanagement. Designed⢠to fit a narrow âset of Frigidaire geometries, the âŁpan provides molded channels and vents that align withâ the evaporator fan âreturn⣠and rear drain hole;⢠correct alignment preserves theâ intended pressure drop and⢠preventsâ warm air recirculationâ into â¤the produce cavity.â In practise, âŁthis means the pan’s molded ribs and slots keep the drawerâ elevated enough to allow evenâ air âdistribution âwhile its sloped⢠surfaces collectâ condensate and direct it toward the⢠factory âŁdrain, reducing standing waterâ beneath drawers and mitigatingâ microbial growth on âfood-contact surfaces.
Airflow,drainage,and seal â¤interfaces interact closely: the evaporator fan forces cooled air over⣠the pan openings,and any deviation in⣠pan height âor gasket seating changes local flow patterns,creating cold spots,frost accumulation,or undercooled pockets that dry produce. Drainage relies onâ a smallâ continuous slope and an unobstructed⢠channel;â hairline cracks, warped⢠edgesor improperly seated pans⤠will âcreate pooling and intermittent overflow into the fresh-food compartment. For technicians and owners, routine checks-seating the pan⤠to âŁits locating âtabs, inspecting the drain trough for debrisand verifying âthat drawer sealsâ are âŁundamaged-are practical measures that restore designed behavior.Aftermarket pans that alter critical â˘tolerances can âŁimpair airflow and drain âŁalignment,⤠so matching dimensions and tab locations is essential for reliable â¤operation.
- Symptoms⢠of pan or â¤interface issues: âŁpooling water under drawers, uneven⤠cooling in crisper area, visible frost around ventsor rattling when the fan runs.
| Item | Description |
|---|---|
| Airflow feature | Molded vents âŁand ribs maintain âclearance for⤠return air and even temperature distribution. |
| Drain path | Sloped channelsâ direct condensate to â¤the rear drain; âblockages cause pooling. |
| Seal âinterfaces | Lip seals and â˘locating tabs ensure proper seating and minimize airâ exchange with adjacent compartments. |
Commonâ Failure Symptoms and⤠Diagnostic Indicators for Crisper Pan Damage, Leaksand Performance Degradation
The crisper pan collects âcondensation and⤠runoff from fruits andâ vegetables and forms partâ of the sealed drawer assembly;⤠the 240351240 Frigidaire Refrigerator Crisper Pan is molded to fit⤠specific Frigidaire⢠drawer rails and drain âopenings.⤠Common mechanical failures are hairline cracksâ inâ the pan wall, deformation from thermal cycling or⢠heavy loadsand damaged â˘mating â¤surfaces that â˘prevent a âproper drawer seal. These faults⤠change how humidity is retained and âhow condensate is routed, âproducing either slow leaks onto the cabinet floor or reduced humidity inside the drawer that accelerates⤠product decay. âSuch as, a smallâ crack beneath the drain channel⢠willâ not âalways produce immediate dripping⤠but⤠will permit slow seepage that pools under the⢠drawer andâ corrodes nearby trim pieces over months.
technicians diagnose⣠crisper pan problems by â˘isolating⢠the water path and verifying mechanical fit.⤠Perform a visual inspection under moderateâ light for⢠stress fractures, run a measured âvolume of water into the pan to âcheck for leaks at seams and the drain interface, âand compare drawer âalignment to⢠factory tolerances; a pan that âshifts more than a few millimeters when loadedâ indicates worn guides or warped pan geometry.Compatibility matters:â replacement pans with slightly different lip geometry or drain⢠portâ diameter can bypass factoryâ condensate routing and â˘cause overflow. Practical âŁchecks include placing a paper towel under the âdrawer â¤to⤠detectâ intermittent seepage, testing the âcabinet⣠drain channelâ for blockagesand measuring drawer travel âŁto ensure the pan compresses any gasketed surfaces evenly.
- Visible cracks or warping: âlocalized moisture accumulation or⢠uneven drawer seating.
- Intermittent âleaksâ after defrost cycles: blocked drain or compromised pan-to-drain seal.
- Rapid produceâ dehydration:â loss of humidity from poor pan sealing or wrong-fit replacement.
- Noise âŁor resistance sliding drawers: distorted pan edges contacting rails or guide âhardware.
| Item | Description |
|---|---|
| Water test | Introduce ~250 mL of water into pan; observe for leaks at seams and drain for â5-10 minutes. |
| Fit⢠tolerance | check lateral movement; âŁ>3-5 âmm indicates possible worn guides, warped panor incompatible replacement. |
Compatibility,Replacement Considerations,andâ Installation Procedures for Frigidaire â˘Models andâ Aftermarket⤠Alternatives
The 240351240â Frigidaire Refrigerator Crisper Pan functions as the âŁremovable bottom tray beneath theâ crispers⢠that âsupports produce drawers,channelsâ condensation to a drain,and⢠helps form a âpartial humidity seal⢠for the drawer assembly. typically injection-molded from polypropylene orâ a similar food-safe âŁthermoplastic, the pan includes molded mounting â˘tabs âand aâ rear drain notch that engage the refrigerator cabinet and⤠drain trough; failures usually â˘presentâ as cracked mounting ears, warped edges⤠that⤠prevent a âflush sealor clogged/draining âŁissues âat the drain outlet. âBefore â˘ordering a replacement, verify OEM and model numbers against the â¤refrigerator’s data plate and inspect the drawer slide geometry, as â˘identical-looking pans may differ in tab spacing,⢠rear lip profileor drain location and thus are not universally interchangeable.
Replacement and installation require simple mechanical checks and alignment ârather thanâ specialized tooling.⢠Common steps includeâ removing the drawer and âany intermediate shelves, inspecting â˘andâ cleaning the drain trough, engaging⣠the âŁpan’s rear lip into â˘the cabinet drain channeland then seating the front âedgeâ so the mounting tabs snap âŁor ârest into their track; ensure the drain opening aligns to the trough to prevent standing water. Practical checks after installation include confirming the drawer operatesâ smoothly over its full⣠travel,the front edge sits flush with the cabinet face to maintainâ the humidity barrier,and there are no obvious âleaks into âthe produce âcompartment; if aftermarket âŁpans are⢠used,compare tab⣠dimensions and drain placement to the OEM part to avoid⢠fitment issues.
- Verify OEM and ârefrigerator model numbers before purchase.
- Inspect mounting tabs,rear â˘drain location,and overall width for fit.
- Clean the cabinet drain trough before installing the new pan.
- Seat the rear lip âfirst, then press or slide the â¤front edge into position and test⣠drawer operation.
| Item | Description |
|---|---|
| OEM number | 240351240 (verify⢠against appliance data plate) |
| Material | Typically polypropylene⣠or âsimilarâ food-grade âthermoplastic |
| Key fit features | Mounting tab spacing, rear drain notch position, front lip profile |
Q&A
What is the 240351240 Frigidaire âŁcrisper pan and what does it do?
The 240351240 â˘is a âŁreplacement crisper pan for Frigidaire refrigerators. It sits beneath the crisper âŁ(produce)⢠drawers and collects⢠spills, condensation and runoff. In many models it⢠also â¤forms the⢠track âor support surface that theâ crisper drawers slide on âand helps maintain proper humidity around stored produce when used with theâ correspondingâ drawers and covers.
How can I tell if 240351240⤠is the correct replacement for my refrigerator?
Check the model number of your refrigerator (usually on a label inside the fresh food compartment⤠or on the door jamb) and⢠compare it to the part compatibilityâ list provided by⢠Frigidaireâ or an authorized parts supplier. If you cannot⢠find a compatibility table, remove the existing pan and compare its âshape, mounting points and dimensions âto the âŁreplacement. Youâ can also contact Frigidaire customer service âor an applianceâ parts store with your fridge model andâ the part ânumber to confirm fit.
What are â˘the steps to remove and install theâ 240351240⢠crisper pan?
General removal/installation steps: 1) Empty â˘the crisper drawers andâ remove⤠them. 2) Depending on⣠the model, either lift the front of the crisper pan slightly and slide it âforwardor release retaining tabs located at the rear before âpulling the pan out. 3) Clean the â¤area,align the⢠replacement pan into the same position and slide âit⣠into the⢠rails until it seatsâ fully. 4) Reinstall the crisper drawers âand âtest for smooth operation. Always âconsult your⣠refrigerator’s manual for model-specific instructions and⢠unplug⣠the refrigeratorâ or disconnect power if â˘you will be working near⤠electrical components.
What materials is the⣠crisper pan made from and how should I clean it?
Crisper pans are typically made from molded â˘plastic (sometimes ABS or polypropylene). âŁClean the âpan with warm water and mild dish soap using a soft cloth or sponge. Avoid abrasive scouring pads, strong â¤solvents (acetone, bleach concentrates) or extremely âŁhot water that could warp the plastic.⢠Dry thoroughly âŁbefore reinstalling. For âŁodor removal,aâ baking soda solution⣠or a vinegar rinse can be used and â˘thenâ rinsed with water.
My crisper pan is cracked or âwarped. âWill thatâ affect refrigerator performance?
A cracked or warped crisper pan won’t usually â¤affect the compressor or temperature control directly, âŁbut it âcanâ cause problemsâ such as water pooling and leaking into other compartments, poor drawer⤠alignment or difficulty opening/closing drawers, âand increased moisture/odors around stored⢠food. Replacing a damaged pan prevents leaks and restores proper drawer âŁsupport and sealing.
Where can âI buy an authentic 240351240 replacement and how much should I expect to pay?
You can buy an authentic 240351240 from frigidaire-authorized parts dealers, major appliance âparts retailers, âor âŁonline marketplaces â˘thatâ sell OEM parts. Prices âvary âby seller and region;⤠expect modest⣠pricing âtypical of plastic⢠interior parts.⢠Always confirm the seller is offering an OEM â¤Frigidaire part⣠or a high-quality⢠aftermarket equivalent and check return policies â˘and any â˘warranty coverage before purchase.
Are â˘there any installation tips âor precautionsâ technicians should follow?
Technicians should remove food and drawers before removing the pan to avoid damage, use gentle leverage at the designated release pointsand inspect drawer âslides/rails for â¤damage or debris.Verify⤠the âpan seats fully and â˘drawers operate smoothly; misalignment can damage the pan or âdrawer. If âthe pan âis part of a humidity-control⣠system, âmake sure any seals or dampers are âŁreinstalled correctly. If⢠electrical components⢠or lighting are ânearby, de-energize the appliance when necessary⢠for safety.
How do I measure the old pan to âŁensure the replacement will fit if I âŁcan’t find compatibility âinfo?
Measure⣠the pan’s⢠overall length,⣠width and depth with a tape measureand note the position â¤and spacing of any mounting tabs⢠or⢠clips. Measure the clearance inside the refrigerator âwhere the pan sits (distance âbetween cabinet walls and from the floor to â˘drawer bottom).⢠Photograph the pan and mounting points and provide those measurements and photos to a parts supplier âto⢠help identify a correct replacement.
Key⢠Takeaways
The 240351240 Frigidaire Refrigerator Crisper Pan serves a practical role in maintaining â¤refrigerator performance andâ food quality.⣠As⣠the receptacle beneath produceâ drawers, it supports the âŁdrawers, collects condensation and spillsand helps contain âmoisture that contributes to humidity control within the â˘crisper compartment. Functionally intact, the pan helps prevent leaks toâ lower compartments and reduces theâ risk of⢠residue buildup,â odorsand microbial growth around the refrigerator interior.
Assessing theâ condition⣠of the crisper pan is an important step when âtroubleshooting refrigeration issues⢠such as â¤unexplained puddling, persistent odorsor uneven âdrawer operation. Visible damage, warpingor persistent leakage âare common indicators that the⤠pan is no longer performing as intended. A careful diagnosis that considers adjacent components (drawer⣠slides, sealsand drainage channels) helps ensure âthe â¤pan⣠is the âunderlying â˘cause before â˘proceeding with replacement.
When replacement is⣠appropriate,⢠installing a correctly specified part like the 240351240 pan restores proper containment and â¤drawer support, frequently â¤enough⤠preventing further service needs and protecting other refrigerator components from water damage. Followingâ safety precautions and âŁmanufacturer⢠guidance â-â or consulting âa qualified technician when necessary – provides âthe most reliable outcome.â timely diagnosis and correct âreplacement of the crisper pan⣠preserve appliance function, hygiene, âand âfood⢠storage performance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
