240364501 âFrigidaire Refrigerator Pan â˘is⢠a service replacement part designed as the condensate â¤collection and drainage tray used in compatible Frigidaire refrigerators. It is a⢠molded âŁdrip pan (sometimes referred⤠to as a drain or evaporator pan) located at the âbase of the cabinet that collects âwater produced during⤠the automatic defrost cycle and any⢠incidental condensation. Theâ part is typically made from corrosion-resistantâ plastic or sheet metal and includes mounting featuresâ and aâ drain outletâ orâ channel to direct condensate to âa safe âŁdisposal area within the appliance.
Inside the appliance, the pan interfaces âdirectly âwith the evaporator drain system and indirectly with components that âŁgenerate or remove heat, such as the evaporator assembly, defrost heater, âand compressor/condensing area. Its âŁprimary role is passive liquid management: accepting âŁdefrost runoff,â preventing condensate from reachingâ cabinetryâ or electronicsand channeling fluid to aâ drain tube or an evaporationâ surface⣠where it can safely dissipate. Proper placement and sealing of the pan are crucial for maintaining correct airflow and preventing water migration that â˘can lead to corrosion, electrical faultsor microbial growth.
Inâ this âŁarticle you âŁwill findâ a technical⤠overview of the 240364501â pan’s function and where⣠it is used within refrigerator models, a compatibility checklist âto confirm fitment withâ specific Frigidaire units, âcommon âŁfailure symptoms (such â¤as cracks, blockages, overflowand misalignment), diagnostic â¤steps to isolate âpan-related âissuesand practical replacement considerations including â˘part verification, required âtoolsand⢠basic installation notes. The guidance is written for technicians, engineers, âand⣠informed â˘appliance owners and assumesâ standard safety precautions such âas disconnecting power before service.
Table ofâ Contents
- Function â˘and Role of the condensateâ Drain âPan in Refrigerator Cooling and Defrost Water Management
- How the â240364501 Frigidaire Refrigerator Pan Works Within âŁthe⤠Cooling Circuitâ and Drain âSystem
- Common Failure Symptoms of the âfrigidaire Condensate⣠Pan: Leaks,⤠Odorsand Ice âŁAccumulation
- Replacement Considerations and StepâbyâStep Installationâ Procedures âfor the 240364501 Frigidaire Refrigerator Pan
- Q&A
- In âConclusion
Function and âRole of theâ Condensate Drain⤠Pan in Refrigerator Cooling and Defrost Water Management
The condensate âdrain panâ collects defrost and condensate runoff from the â¤evaporator and provides a âcontrolled location âŁfor that â¤water to evaporate. The 240364501 Frigidaire Refrigerator pan is molded to âŁfit⢠beneath the âevaporator and âabove the âcompressor âarea soâ compressor âwaste heat or an integrated heater⢠can vaporize accumulated⢠water rather of allowing⤠itâ toâ pool beneath the⤠cabinet. The pan typically includes⤠a â¤drain⤠outlet orâ boss that connectsâ to the evaporator drain tube and âmountingâ points that index âit to the chassis; correct alignment is required to prevent misdirected âflow or contact with moving components. Materials (thermoplastic or stamped â˘metal) and measured capacity determine howâ long the panâ can safely â¤hold defrost volume between â˘evaporation cycles and whether it resistsâ deformation from⣠heat under the âcompressor surface.
Performance issues are usually diagnostic: a clogged evaporator⢠drain or a cracked/warped pan causes water leaks into the refrigerator cavity or onto the floor, while⣠an improperly⣠positioned pan can reduceâ evaporation efficiency and increase âhumidity ânear⣠the âcompressor. A practical check is âŁto pour a measured quantity of water into âthe â¤evaporator drain and observe âthe pan⤠for proper collection and evaporation over several hours; a⤠steady âleak or no âevaporation indicates obstruction or partâ failure.â replacement with an OEM-fit âpan⢠restores the intended⢠drain path and⤠evaporation geometryand routine maintenance-clearing the âdrain tube, confirming heater⢠function if present,â and ensuring the pan is securely mounted-prevents most service calls.
- Key features: molded drain outlet, mounting bosses,⤠corrosion-resistant materialand capacityâ sized⣠for model-specific defrostâ cycles.
| Item | description |
|---|---|
| Location | Beneath âevaporator coil,above compressor/heat source |
| Primary âfunction | Collect and allow evaporation of defrost/condensate water; âŁinterface with evaporator⣠drain⣠tube |
| Common â¤failure modes | Cloggedâ drain tube,cracks/warping,misalignment causing leaks |
How the 240364501⤠Frigidaire Refrigeratorâ Pan âWorks Within the Cooling Circuit and⢠Drain System
The 240364501 Frigidaire Refrigerator âŁPan serves as the condensate â¤and defrost â˘collection basin mounted beneath the evaporator and compressor âassembly.â Melted frostâ andâ internal condensation âtravel through the⢠evaporator drain tube into âthe pan where âthe fluid is⣠held briefly and then⢠evaporated by heat from the compressor area or aâ small heater âŁelement in certain models. The pan’s geometry and mounting points⣠form a sealed catchment that⢠prevents water from contacting â¤electronicsâ or leakingâ onto theâ floor; compatible replacements must match⣠the original â˘mounting tabs, drain outlet positionand material thickness to maintain proper alignment with the âcooling circuit and drain system.
Within⣠the cooling circuit the pan isâ a passive but essential component: it neither affectsâ refrigerant flow ânor heatâ exchange directly, but it completes the moisture managementâ pathâ by âproviding an⢠evaporative âsurface and a â˘controlled outlet for condensate.Typical â˘failure modes âare drain-tube blockages,â cracks or warped fit that allow overflowand âloss of âevaporative efficiency if the pan is obstructed âby debris. Technicians commonly diagnose issuesâ by âpouring âa measured âvolume of water into the evaporator drain,⤠observing flow intoâ the pan and â˘evaporation rate near the compressor, âand then replacing or realigning theâ pan or âdrain tube if â¤flow is impeded. Practical maintenance includes ensuring proper drain slope, â¤clearing biofilm or ice from the drain channeland verifying that replacement pans match the original dimensions for secure integration with the refrigerator chassis.
- key checks: drain-tube clearance, pan integrity (no â¤cracks), correct âmounting alignment, presence/function of evaporative heater or compressor heat.
- Behavioral signs:â slow drainage, water pooling⤠inside the cabinetor moisture under the refrigerator.
- Replacement⣠guidance: use a pan matching original outlet location âand mounting⢠features âto avoidâ misrouting condensate.
| Item | Description |
|---|---|
| location | Mounted under â˘evaporator/compressor assembly to collectâ condensate âŁandâ defrostâ water. |
| Material | Typically molded polymer or stamped metal; âchoice affects⢠durability andâ heat transfer forâ evaporation. |
| Primary function | Collect and allow evaporation of condensate; prevent leaks into cabinet and electrical areas. |
| Common symptom of âfailure | water inside the fridge, puddling on the flooror slow drainage from evaporatorâ drain. |
Common Failureâ Symptoms âof the Frigidaire Condensate Pan: Leaks, odorsand Ice Accumulation
The 240364501 Frigidaire Refrigerator â˘Pan is the molded condensate reservoir âthat collects defrost and evaporator condensate beneath⣠the appliance chassis and routes it to the compressor-area evaporative heater for disposal.â In practice⢠the pan is âmolded from thermoplastic and â˘designed to align âŁwith â˘specific mounting pointsâ and a drain tube or funnel; incompatibility in dimensions or drain geometry will produceâ overflow â˘or misdirected drainage. âCommon mechanical failure modes includeâ hairline cracks from impact or thermal stress, deformation from âexcessive heat near the defrost heaterand loss of sealing âŁat the drain⣠junction; each of these â˘alters â˘the pan’s â˘capacity âto⢠contain and direct water and thus âgenerates the symptoms âŁlisted below.
- Visible pooling or wet floor beneath â˘the refrigerator âcabinet âduring or after a defrost cycle
- musty or sour âodors from standing water and microbial growth inside âthe pan
- Ice accumulation in the freezer floor or at the â˘drain outlet caused by a clogged drain line
- Intermittent leaks that correspondâ to the defrost timer âor compressor âruntime
- Rust âor corrosion on adjacent âsteel⢠components indicating⢠prolonged leakage
| Item | Description |
|---|---|
| Cracked or warped â¤pan | Small fractures or deformation allow âcontinuous drip-through; visibleâ under âluminous light or by flexing the pan during inspection. |
| Clogged âdrain tube | Organic debris âand ice block âthe drain; defrost water backs up into the freezer⤠or overflows the â˘pan. |
| Poor mounting/alignment | Misplaced clips⤠or a tilted chassis prevents the pan from capturing condensate âat the â˘designed inlet â˘points. |
Diagnosing âthe fault involves a controlled inspection: remove the kick plate, visually inspect the pan â¤for cracks and deformationand⣠confirm free flow through the drain tube by introducing a âŁsmall âvolume of warm water at the â¤evaporator drain â¤outlet. If water bypasses the pan or the âdrainâ immediately refreezes, âthe likely causes are a âcracked pan, a blocked drainor excessive evaporator icing; technicians often⢠reproduce âthe âdefrost cycle âŁto⤠observe the⤠exact pointâ of overflow. ârepair options depend on severity-a temporary epoxy patch can stop a hairlineâ crack, but a deformed or heat-damaged pan should be replaced with the correct OEM geometry to⢠restore âreliable drainage and avoid recurring leaks or odors.
Replacement Considerations âŁand StepâbyâStep Installation Procedures âŁfor the 240364501 Frigidaire Refrigerator Pan
The â¤240364501 Frigidaire Refrigerator Pan⤠functions as the primary condensate â¤collection and temporary reservoir beneath âŁthe⤠evaporator and â¤compressor area; it captures defrost water, routes it to the drain tube, âand can also⢠house a small heater or sensor depending on model.Replacement considerationsâ include verifying mechanical fit (mounting tab positions, drain outlet locationand clearanceâ for compressor lines), material integrity⤠(hairline cracks or⤠deformations in ABS⢠can cause slow âŁleaks),⢠and associatedâ components that commonly fail⣠concurrently,⢠such as the drain tube, foam seals,⤠or a pan-mounted heater. Typical failure symptomsâ are puddling⣠under the âŁcabinet, persistent musty odors from trapped wateror visible cracks when the⢠unit â˘is tilted forwardâ for inspection.
- Verify exact part match and â¤cross-reference model numbers âbefore purchase.
- Inspect âand clean the defrost drain and âŁdrain tube to rule out clogs âbefore replacing the pan.
- Prepare â˘basic tools: phillips screwdriver,â pliers, trim toolsand a smallâ funnel for drain testing.
- Note locations of fasteners âand any electrical connectors for heaters or sensors.
- plan for a test after installation: pour warm âwater into the defrost âdrain to confirm unobstructed flow into the new pan.
Installation follows a controlled⣠sequence to avoid damage to refrigerant lines and to⣠ensureâ reliable drainage: disconnect power, pull the refrigerator forward and remove â˘the toe grille,⢠then support and tilt the â¤unit according to⣠manufacturer guidance. Remove mounting screws âand carefully lower or â˘slide out the old pan, disconnecting the drain hose and âany pan-mounted sensors or heaterâ leads; replace the pan with the new â¤240364501 piece, reattach the drain hose ensuring a continuous downward slopeâ (recommend approximately 1-2% slope toward⤠the âdrain outlet)and reseat any insulation â˘or foam pads that provide support⣠and vibration⢠isolation. After reassembly, restore power and run a manual drain⤠test by pouring a literâ or âtwo of water into the defrost drain;â observe under the fridgeâ for leaksâ and confirm the water collects in the⤠pan⢠and drainsâ to theâ designedâ location.
| Item | Description |
|---|---|
| Part number | 240364501⣠-⤠OEM condensate/drip pan⣠for compatible âFrigidaire⤠models |
| Material | Injection-molded ABS or polypropylene (model dependent) |
| typical fasteners | #8 phillips screws âor plasticâ clips; avoidâ over-torquing |
| Drain hose | Common ID: 3/8″ (10 mm); ensure secure slip or clamp connection |
| estimated install time | 20-45 minutes⤠for âa â˘single technician, depending on access and complexity |
Q&A
What is Frigidaire part⣠240364501?
Part 240364501⢠is the OEM refrigerator drain/drip pan used â¤on âcertain Frigidaire refrigerators. Its primary job is to collectâ water from⢠the âevaporator drain during âautomatic defrost âand allow that water to evaporate safely beneath the appliance.
Where is the 240364501 drain pan⢠located on the refrigerator?
The drain⤠panâ sits underneath the cabinet, typically toward⣠the rear âof the refrigerator âŁnear âthe compressor area. It is accessed by removing â˘the lower kick/grille or by âŁpulling the appliance forward so âyou can reach âŁunder the⣠unit. the evaporator⣠drain tube empties into this pan.
How can â˘I âtell⤠if the âdrain pan is damagedâ or needs replacement?
Signs âof a failing pan âinclude visible⢠cracksâ or warping,recurring water pooling â¤around or⣠under the refrigerator,strong musty odors (from standing water and â¤bacterial growth),or a pan that is â˘overflowing because the drain âtube discharges improperly.inspect â˘the panâ visually and check âŁfor âdamp⢠insulation or water trails under the âcabinet.
How do I remove and replace part 240364501?
Basic replacement steps: 1) Unplug the refrigerator. 2) â¤Pull the unit away fromâ the wall to access the kick grille. 3) â˘Remove⣠the lower âgrille or access panel (usually held by clips or screws). 4) âSlide out the drain pan-be⤠prepared for residual water. 5) Clean the mounting area⢠and inspect/clear the evaporator drainâ tube.⣠6) âInstall the â˘new 240364501 pan,⢠ensuring it seats correctly under the drain tube⤠and any locating tabs align. â˘7) âReinstall the grille, push the fridge backand plug it in. Always follow the refrigeratorâ model’sâ service manual â˘for exact removal steps.
What tools and safety precautions do I need for replacement?
Tools: flathead or Phillipsâ screwdriver or ânut driver for the âgrille⤠screws, gloves, towels or â˘a shallow containerâ to catch⤠waterand a âflashlight. âSafety: unplug the refrigerator⤠before working onâ it, âwear gloves to avoid⤠sharp⤠sheet-metal edgesand âŁkeep the applianceâ steady ifâ you⣠need to move it.
How shouldâ I â¤clean andâ maintain the drainâ pan to prevent problems?
Remove âthe pan periodically and rinse with warm⤠water and mild â˘detergent. Scrub away âslime or debris; a solution of â¤baking soda and water helps neutralize odors. Inspect and clearâ the evaporator drain tube using warm water or aâ pipe cleaner to prevent clogging that can cause â¤overflowing into theâ pan.
Does the 240364501 pan include any heaters or sensors?
Most⣠drain pans, including partâ 240364501, are simple molded plasticâ pans without electrical components. Some refrigerator models (not necessarily this part)â use a panâ assembly that incorporates a heater or⣠sensor; check theâ parts diagram for â˘your specific model âto confirm whether additional components are required.
How do I confirm compatibility and where canâ I buy part 240364501?
Confirm compatibility by checking your refrigerator’sâ model number (inside the cabinet or on the owner’s sticker)⤠and using an âofficial Frigidaire parts lookup or a âreputable partsâ dealer.⣠You can purchase 240364501 from âFrigidaire/Electrolux authorized parts distributors, appliance parts retailersor online marketplaces;⣠always verify the OEM part number and return policy before buying.
in summary
The 240364501 Frigidaire refrigerator pan serves a straightforward but critical role in appliance⢠function: it collects and channels condensate and defrostâ runoff, provides âŁa surface area for evaporationand helps prevent water from reaching internal electronics orâ the surrounding⢠floor. As a purpose-designed part, the pan contributes to proper drainage, hygienic operationand overall âcooling âŁefficiency, âmaking it an integral component in maintaining reliable ârefrigerator performance.
proper diagnosis and timelyâ replacement of âthe 240364501 pan are important when symptoms âsuch âas persistent leaks, pooling water, visible cracks, mold growthorâ unusual odors indicate a failing orâ misaligned pan.⢠Confirming the⤠correct âpart⣠number and compatibility, using an appropriate OEM or âequivalent replacement, â˘and⢠following manufacturer guidanceâ or qualified âserviceâ recommendations help ensure the pan performs as â˘intended âand reduces the risk of secondary damage to the appliance.
Regular inspection and prompt attention to drainageâ orâ pan issues can extend appliance life,⢠protect stored food,â and prevent costly âŁrepairs to⤠surrounding componentsâ or flooring. When a problem is⤠identified, a careful, documented diagnosis followed by a proper replacement of the â240364501 pan preserves refrigerator efficiency and supports long-term, trouble-free operation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
