316240600 Frigidaire Ignitor Mountingâ Screw â¤is a specific mechanical âfastener used âto secure âan ignitorâ assembly in Frigidaire cooking âappliances. It is⤠a smallâ but â¤purpose-built component-typically a âmachineâ screw or self-tappingâ screw-selected for dimensional fit, thread form⢠andâ material compatibility with the ignitor bracket, housing⤠and adjacent components.
Inside⢠the appliance the mounting screw’s âŁprimary roleâ is â¤to hold âthe ignitor in the correct position relative to the burner or combustion chamber so the ignitorâ can reach⢠the required temperature and⣠reliably transfer heat or spark â¤to⤠the⣠gas for ignition. By maintaining alignment and minimizing mechanical stress on the fragile â¤ignitor â˘element, the screw⣠interactsâ indirectly with the ignition system,â burner, gas valve⢠and any flame-sensing components;⤠improper mounting or degraded fasteners can lead⣠to misalignment, â˘vibration-induced⤠damage,â intermittent ignition or degraded flame sensing.
In âthis article you will find technical facts about âthe screw’s functional role, howâ to verify compatibility with specific Frigidaire models, common symptoms associated with mounting-screw problems (looseness, corrosion, stripped threads, broken or shiftedâ ignitor), practical troubleshooting steps to inspect and diagnoseâ mounting issuesand replacementâ considerations suchâ as correct part selection, thread engagement, âmaterial compatibility and âinstallation best â˘practices. The goal is to â˘provide technicians, engineers and appliance owners with the practical context needed to⢠assessâ and address ignitor mounting issues â˘safely âŁand⢠reliably.
Tableâ of Contents
- Function and Role of â¤the Ignitor â¤mounting Screw in Frigidaire gas rangeâ Ignition Systems
- How the 316240600 âFrigidaire Ignitor âMounting⣠Screw Works Inside the Appliance
- Common Failure⣠Symptoms â˘and Visual/Electrical Diagnostic Criteria for â¤Mounting Screw Issues
- Compatibility,⣠Replacement Considerationsand Step-by-Step Installation Guidelines forâ the 316240600
- Q&A
- The âConclusion
Function and Role of⤠the Ignitor Mounting âScrew in Frigidaire⣠Gas Range Ignition â˘Systems
The 316240600 Frigidaire Ignitor Mounting Screw is a⣠small but critical â˘mechanical fastener that secures the ignitor assembly to âthe burner box and sets the precise position of âthe ignitor electrode relative âto âthe burner. its dimensional features-thread âpitch, lengthand head⣠style-ensure correctâ thread engagement and the⢠required standoff so â¤the âceramic insulator and fragile ignitor element âare notâ stressed. In practice, â˘the OEM⣠screw holds the ignitor rigidly through repeated thermal cycles while providing â¤the correct clearance for⤠reliable sparking; substituting a screw with incorrect length or â¤thread can allow⤠movement, misalignment, intermittentâ ignitionor cracking of the ignitor ceramic during tightening.
- Features: correct⣠thread engagement, âŁcorrosion-resistant finish, âŁappropriate head forâ access in the â¤burner box.
- Symptoms of failure or mismatch: intermittent â˘spark, âdelayed ignition, visiblyâ loose ignitor,⢠or cracked âŁceramicâ around the mounting hole.
- Installation guidance: remove power and⤠gas before⣠service;⣠align the ignitor, hand-thread to avoidâ cross-threadingandâ snug âwithout deforming the⣠insulator.
Compatibility with âŁFrigidaire ranges depends on âthe ignitor âassembly design; âthe screw âŁis âintended⢠toâ match the âoriginal⢠mounting hole, depthandâ electrical/thermal habitat. technicians replacing âthe ignitor assembly â¤shoudl inspect the screw for stripped threads or corrosion and âŁreplace it with the⣠316240600 screw or an exact-equivalent of the same material and dimensions to preserve alignment âand⢠grounding behavior.⤠For â¤routine troubleshooting, check⤠that â˘the screw is securely â¤holding âthe ignitor âin the correctâ position and that no⢠metal-to-ceramic stress⤠points are present, âas mechanical issues⢠at the â¤mounting point are a⢠common âŁcause of â˘ignition problems â¤that mimic electrical faults.
| Item | Description |
|---|---|
| Part number | 316240600 (OEM screw for specified Frigidaire ignitor assemblies) |
| Function | Securesâ ignitor, maintains position and alignment relative to burner electrode |
| Material/finish | Corrosion-resistant metal â˘(match OEM to avoid galvanic âŁissues) |
How the â˘316240600 Frigidaire Ignitor Mounting âscrew Worksâ Inside âŁthe âAppliance
The 316240600 Frigidaire Ignitor âMounting Screw âacts asâ the primary mechanicalâ interface that holds the ignitor assembly to the burner âbracket or mounting boss. By controlling â¤thread engagement,⣠head seating â¤and âclamping⤠force,â the screw⢠fixes the ignitor’s axial position so âthe â˘fragile ceramic/glass element and its metal â¤base â¤remain âstable during âŁrepeated âthermal cycles. Proper seatingâ andâ thread match also maintain the designedâ offset between the ignitorâ tip and the gas port; that geometric ârelationship is critical for consistent glow time, flame establishment,⤠and reliable flame â¤sensingâ in⤠many Frigidaire ovensâ and ranges.
Compatibility⢠is âdetermined by thread pitch, length, head style and the⤠specific mounting geometry of the appliance; substituting â¤a different âscrew length or profile can allow movement,⣠cause misalignment, crack the ignitor housing, â¤or⢠preventâ full electricalâ contact if the mounting also provides grounding. In⢠practice, technicians should inspect theâ mounting boss â¤and screw â¤threads â˘for corrosion orâ stripping, hand-startâ the screw âŁto⢠confirm correctâ engagementand tighten to âa firm, controlled snug-avoiding over-torque that â˘canâ fracture theâ ignitor or deform the bracket. Common failure symptoms⣠relatedâ toâ the âmounting screw â˘include intermittent ignition, extended glow time⤠before flame, audible⤠vibration â˘of the ignitor assemblyor âvisible cracking of the ignitorâ base.
- Mechanical fixation: secures ignitor⢠to bracket and resists thermalâ cycling forces.
- Alignment⤠control: â˘maintains⤠tip-to-port â¤geometry required âfor reliable ignition.
- Service indicator:â damaged or incorrect screw frequently enough manifests asâ ignition âfaults.
- Compatibility checkpoint: verifyâ length, thread,â and head style âagainst OEM specification.
| Item | description |
|---|---|
| Function | Provides⣠repeatable mechanical location and⢠clamping of the ignitor⣠assembly. |
| Failure â¤mode | Loose,corrodedâ or incorrect â˘screwâ can cause misalignment,cracking,or intermittent ignition. |
| Installation note | Hand-thread âŁto⢠seat,â than snug; replace with the correct part ifâ threads or head are damaged. |
Common Failure âŁSymptoms and âVisual/Electrical â˘Diagnostic Criteriaâ forâ Mounting â˘Screw issues
The 316240600 Frigidaire Ignitor âMounting Screw ⣠mechanically secures the hot surface âignitor assembly to âthe burner box âand provides a stable physical and, in âŁsome⤠designs, a reliable grounding/contact âŁpoint. Proper seating and â˘torque prevent âmechanical stress onâ the brittle ceramic/pyrolytic âelement and keep the ignitor positioned in the gas stream âfor consistent ignition. Technicians replacing or servicing âŁignitorsâ should⤠match the screw length and head type to the original part and verify â¤any insulating washers or standoffs are correctly installed to avoid introducing a short or permitting⤠movement that âŁwill prematurely crack the element.
Common symptoms from mounting-screw related faults include intermittent âŁignition, visible arcing,⢠repeated spark â˘noiseor⣠a physically loose ignitor that vibrates during oven operation; electrical checks focus⢠onâ visual evidence of âcharring,⤠stripped threadsor corroded âplating andâ on circuit-level âŁtests. âPerform âa visual inspection for discoloration or deformation at⤠the screw interface, check for âmechanical play with the ignitorâ coldand measureâ line voltage at theâ ignitor âŁconnector âduring a callâ for heat â(nominallyâ ~120 VAC on many âFrigidaireâ units). Ifâ correct voltage is present â¤but the ignitor does not draw its expected current or glow, the problem is likely the ignitor â˘element rather then the â¤mounting screw; âconversely,â visible arcing âor âa âbad ground path at the screw warrants replacement of the screw and any damaged mounting⣠hardware to âŁrestore a clean mechanical and electrical connection.
- Loose or missing screw – âignitor âŁmisalignment,vibration,or fracture.
- Charred insulation âor melted head – evidence⢠of arcing/shorting at the â¤mount.
- Intermittent⢠glow⢠or repeated clicking â- â˘possible poor electrical â¤contact or grounding via the âscrew.
- Correct supplyâ voltage but no current draw – points toward a failed â˘ignitor element,⣠not solely the mounting screw.
| Item | Description |
|---|---|
| Visual: discoloration or arcing | Replace screw and damaged hardware; inspect ignitor for cracks. |
| Mechanical play at â˘mount | Tighten âŁor â¤replace screw âŁtoâ specification; ensure correct washers/standoffs used. |
| Voltage present âŁat call for heat | If ~120 VAC present but no glow,test⣠ignitor resistance/current draw; replaceâ ignitor if outâ of⤠spec. |
Compatibility, â˘Replacement Considerationsand Step-by-Step â˘Installationâ Guidelines forâ the 316240600
The 316240600⣠Frigidaire Ignitor Mounting Screw is a mechanical fastenerâ that secures the ignitor assembly⤠to its bracket or burnerâ housing⢠and ensures consistent⢠alignment of the ignitor element relative to theâ electrode or gas orifice. â˘Proper alignment âcontrols the flame path and â˘heat transfer; a screw that is too short, too longor of â¤the âwrong threadâ form can permit movement, create an improper âair/gas gapor place stress âon fragile âceramic insulators. Verify⤠compatibility by matching the screw’s â˘thread â¤pitch, head⤠type,⤠and â˘length to â¤the original part number âor â˘to the âŁmounting hole depth⣠and diameter on the appliance âbefore reuse orâ replacement; technicians commonly replace this screw when âŁit shows corrosion, stripped⣠threadsor if the ignitorâ is being swapped âand the OEMâ screw was not âprovided with the⢠assembly.
Disconnect power and gas â¤before beginning work and follow⤠standard appliance safety practices.Typical installation steps are:
- Remove access panels to expose the ignitor andâ bracket, âŁthen note the⤠original screw orientation and any âwashers or insulatingâ sleeves.
- Removeâ the oldâ screw; inspect âthe mounting hole and bracket for â¤thread damageâ and â¤clean debris that⣠could â¤prevent full seating.
- Fit the replacement screw that matches âthe original thread and length; hand-start the screw to avoid cross-threading⤠and tighten until âsnug-avoid overâtorquing âŁwhich canâ crack â¤ceramic or deform the ignitor base.
- Reinstall anyâ insulating components and panels, restore âpower and gasand observe several ignition cycles to confirm stable ignition âŁand âthat the ignitor remains fixed â˘without âvibration.
| Item | Description |
|---|---|
| Recommended â¤fastener | OEM 316240600 Frigidaire⣠Ignitor Mounting Screw⢠orâ an equivalent corrosionâresistant screw with matching thread,head style,and length to preserve⣠alignment and mechanical integrity |
Q&A
What is the Frigidaire part 316240600?
Frigidaire part 316240600 isâ the small mounting screw used to secure the âovenâ ignitor â¤assembly (or ignitor bracket) in âmany Frigidaire/Frigidaire âGallery⤠ranges and âsimilar models. It isâ indeed anâ OEM fastener intended specifically for that service point rather than⣠a generic household âscrew.
How do I know if 316240600 âis âthe right replacement screw for my range?
Verify â˘the part number â˘against your⣠appliance model/parts âŁlist â¤(usually foundâ in the⢠owner’s manual â˘or on the manufacturer’s parts lookup online).⣠Compare theâ removed screw to the OEM â˘part⤠in size and â˘head âstyle âbefore installing – if the screw came with the replacement⢠ignitor assembly, it âis theâ correct one.
What tools do âI need to remove and âinstall theâ ignitor mounting screw?
Typicallyâ you will needâ a screwdriver that matches the screw head (Philips orâ Torx commonly). For access you may also need âa nut driver or socket set âto remove panels⣠or the oven floor.Always disconnect electrical âpower (and gas if â˘applicable) and let the oven cool fully before starting.
Can Iâ reuse the old mounting screwor should I replace it with âa ânewâ 316240600?
if theâ original â˘screw is undamaged and threadsâ are in good condition it âcan usually âbe reused.Though, as â¤these screwsâ are exposedâ to heat and corrosion, technicians frequently âŁenough replace them⤠with a new âŁOEM 316240600 âŁto ensure âŁsecure mounting and proper fit.
How tight should the ignitor mounting â¤screw be⢠tightened?
Tighten⣠the screw⤠until âthe ignitor is held firmly in place without movement, but âavoidâ overâtorquing. These are small screws andâ excessive force can strip theâ threads or crack the ignitor mounting bracket. Handâtighten with a screwdriver âuntil snug, then⣠give a â˘small additional fraction âŁof a turn if necessary.
What if the screw head âor âthreads areâ stripped during removal?
If âŁthe head is stripped, use a â˘screw extractor or â˘a screwdriver⢠designed for stripped⢠heads â˘to remove it. âŁIf the threads in the bracket or mounting hole â˘are damaged, you may â¤need âŁtoâ repair the âŁthreads (e.g., with a âhelicoil or oversized fastener) or replace the bracket/panel. avoid forcing a replacement screw into⤠a âdamaged hole, as⢠thatâ can create⣠a loose or unsafe mount.
Are there aftermarket alternativesâ toâ the OEM 316240600⣠screw?
Aftermarket or generic stainless steel⣠screws âof the correct size and thread pitch can work,but OEM⢠316240600 âŁis âŁrecommended for guaranteed fit and material compatibility. âIf you choose a âŁsubstitute, match the original screw’s length,â diameter, head type, thread formand use a heat- and corrosion-resistant material (stainless steel).
Whereâ can âŁIâ buy part 316240600 and how âdo I verify â˘authenticity?
You can purchase⣠316240600 from Frigidaire’s official parts distributors,⢠authorized appliance parts retailersor reputable online parts stores.â Verify by checkingâ the âseller’s reviews, â˘the⣠part number listingand âcomparingâ the part to OEM photos/specifications. When in doubt,order through the manufacturer’s parts site or an â˘authorized â˘dealer to ensure authenticity.
The Conclusion
The 316240600 Frigidaire ignitor mounting âŁscrew is a small but essential component that secures the ignitor assembly â¤in place and helps maintain correct alignmentâ and electrical contact within the range or oven burner⢠system. Byâ keeping the â˘ignitor properly⤠positioned,the mounting screw contributes directly to reliable ignition,consistent heating âperformance,and the⢠prevention of âŁwearâ or⤠damage âŁcaused by vibration âand movement during normal appliance operation.
Although it is often overlooked, aâ compromised, corrodedor incorrectly sized mounting screw canâ lead to misaligned ignitors,⤠intermittent ignition,⣠orâ safety concerns such asâ arcing. Maintaining⢠the integrity âof this fastening component supports overall appliance reliability and â¤can â¤reduce the likelihood of unneeded repairs â¤or part failures elsewhere in the ignition system.
For these reasons, accurate⣠diagnosis â¤and timely⣠replacement⤠of⢠the 316240600 mounting screw whenâ signs of âdamage âor wear are âpresent are criticallyâ important. Inspectingâ the screw⢠and related ignitor assembly as part⣠of routine⢠troubleshooting,⢠using the correct OEM replacement partand observing âŁproper safety⤠precautions⣠during any service will help ensure safe,⣠dependable operation;⤠when⢠in doubt, consultation with a qualified⢠service â˘technician â¤is recommended.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
