5303918202 Frigidaire Refrigerator Defrost Thermostat is a temperature-actuated switch designed for the defrost circuit of frostâfreeâ refrigerators. As a small, typically bimetal or thermally⤠sensitive snap-action device, it senses⣠evaporator temperature and changes state â˘to⤠allow or interrupt current to â¤the defrostâ heater. The part is⢠mounted inâ thermal contact with the evaporator coil or its support⢠and is intended as a control and safety âelement rather than⢠a continuous temperature âregulator.
Inside the appliance, âthe defrost âŁthermostat interfaces â˘directly with the defrost heater and the defrost control (timer or â˘electronic control â˘board). During a scheduled defrostâ cycle⢠the control â˘supplies power to the heater only if the thermostat indicates âthe evaporator âis cold enough âto â¤require defrosting; the thermostat opens once â˘the evaporator reaches a specified warmer temperature to âterminate the heater âŁand prevent overheating. It â¤therefore works in series with the heater circuit and influences heat transfer at the evaporator, while indirectly affecting freezer temperature⣠stability and âŁfan/airflow performanceâ during and after defrost âevents.
Thisâ article explains the thermostat’s operating principle, âtypical temperature⢠ratings and mounting practicesand how to determine compatibility with specific Frigidaire models.⣠It will cover common failure symptoms (excessive⤠frost accumulation,continuous heater operation,or failedâ defrostâ cycles),practical troubleshootingâ methods (continuity checks,inâsitu temperature verification during a âŁdefrostâ cycle,and isolation tests),and⢠key replacement considerationsâ such as correct part âselection,safe âdisconnection of power,proper thermalâ contact⤠and routing of âleads,and verification of successfulâ defrost⢠operation after replacement.
Table⤠of Contents
- Function âand⢠Role â˘of âthe Defrost Thermostat⣠in Frost Control and Heater Cycling
- How the 5303918202⤠Frigidaire Refrigerator Defrost thermostat Operates Within⢠the Defrost Cycle âŁandâ Control Circuit
- Common âFailure Symptoms and Diagnostic Indicators of a Faulty Defrost âThermostat
- Troubleshooting Procedures and Diagnostic Tests for defrost Thermostat circuits
- Q&A
- To Conclude
Function⤠and Role of the Defrost Thermostat in Frost Control and Heater Cycling
The 5303918202 Frigidaire Refrigerator Defrost Thermostat is a temperatureâsensitive bimetal switch that⤠is â˘mounted against the â¤evaporator coil and used to control the defrost heater â˘circuit. During a commanded defrost interval the control board or âŁtimer suppliesâ power âto the heater throughâ this thermostat; the device is normally closed at low evaporator⣠temperatures so the heater receives â˘power âŁuntil âŁthe coil warms and âŁthe thermostat opens to terminate heating. As a series safety/control element, âthe thermostat â¤prevents the heater âfrom running indefinitely andâ provides a â¤simple, reliable meansâ of sensing the coil temperature without electronic sensors.
Functionally, the thermostat’s behavior determines⢠how long and when defrostâ heat is applied:â the closing âŁ(activation) âand âŁopening temperatures âset âthe allowable thawâ rangeâ and must âmatchâ the refrigerator’s controlâ strategy. âTypical activation specifications areâ approximate and varyâ by design,â soâ replacements must match terminal â¤style, mounting âclip, activation⢠rangeand voltage rating âto avoid improper cycling. Practical examples: a thermostat⤠that fails open willâ stop the heater from energizing and causeâ progressive frost buildup on the evaporator, while aâ thermostat that failsâ closed can allow excessive heater runtime; technicians verify â˘operation with cold continuity⢠checks and by confirming correct seating on theâ coil and connectorâ compatibility before installing a replacement.
- Common⢠diagnostics: no continuity⢠when cold (open = failed open), continuityâ at room temperature (stuck closed)or intermittent continuity⣠(intermittent failure).
- Symptoms âŁof failure: heavy evaporator⣠icingâ and reduced cooling (open)or shortened defrost⢠cycles âŁand âŁunnecessary â˘heater runtime (closed).
- Replacementâ considerations: match activation âŁrange, terminal âtype, â˘mounting clipand voltage rating âŁto the original unit.
| item | description |
|---|---|
| Switch type | Temperatureâactivated bimetal switch, normally closed when cold |
| Typical activation range | Approx. â0-10°C (32-50°F)⣠close; âŁopens at warmer temperatures – verify exact spec for the âunit |
| Voltage / compatibility | Commonly used with 120 VACâ heater circuits in âFrigidaire units; confirm terminal style âand⣠fitâ for â¤OEM part 5303918202 |
How the 5303918202 Frigidaire Refrigerator Defrost Thermostat Operates Within the Defrost Cycle and â¤Control âCircuit
The 5303918202 Frigidaire Refrigerator Defrost Thermostat is âa bimetal⤠temperature sensor mounted to⢠the âŁevaporator âŁthat â¤acts âŁas⢠a safety and control element in the defrost cycle. â˘Functionally âit is a normally closed switch at low evaporator â¤temperatures: when⢠the evaporator isâ cold âit closes to allow the âdefrost heater circuit to â˘be completed under control of the âtimer or electronic â˘defrost boardand asâ the âŁheater warms the coil â¤theâ thermostat opens to interrupt the heater and prevent overheating.In typical⤠installations this âŁpart is placed in series with the defrost â¤heater andâ the control device,so its electrical continuity âdirectly determines whether the heater can beâ energized during âa⤠scheduled defrost interval. Compatibility is determined⢠by the mounting â˘clip, terminalâ styleand activation temperature range;⢠replacing with a unit with the same physical âfit and switching temperature is required for correct operation across different frigidaire models.
In practical termsâ the defrost thermostat monitors coilâ temperature rather than timing; a failed⣠open thermostat âŁprevents the heater from â˘running âand leads to persistent frost and poor cooling,⣠while a⢠failed â¤shorted thermostat can cause excessiveâ defrost âheating and potential component stress. Technicians commonlyâ diagnose the 5303918202 by checking continuity at ambient and chilled temperatures (or by âsimulating⣠cold with ice) and by inspecting the clip placement⤠on âthe evaporator. When⣠replacing⣠the part, match â˘the⢠terminal type, clip orientation,â and the thermostat’s⤠rated âactivation range so⤠the defrost cycle âŁresumes the intended âthermal control without altering the cabinet’s âcooling balance.
- Common⣠symptoms: excessive frost buildup â(open thermostat)or evidence of prolonged defrost/heater operation (stuck closed)
- Diagnostic tip: check continuity cold â˘(should âbe closed)⣠andâ warm (should open) with a multimeter
- Replacement note: ensure âmechanical âŁclip, terminal styleand activation temperature match the original
| Item | Description |
|---|---|
| Type | Normally closed bimetalâ defrost thermostat |
| Function | Completes heater circuit when âevaporator is cold; opens as â¤evaporator warms during defrost |
| Location | Clipped to evaporator coil, âŁwired⣠in series withâ defrost heater âand control |
Common â˘Failure Symptoms and Diagnostic⤠Indicators of a Faulty Defrost Thermostat
The 5303918202 Frigidaire Refrigerator âDefrost Thermostat âis a temperature-sensitive switch that completes âthe defrost-heater circuit⢠while theâ evaporator⤠is âŁbelow its setpoint andâ opens to interrupt heater â˘power once ice has melted and the sensor warms.it is typically mounted against the evaporator or its sheath so it senses âŁmetal temperature directly; â¤proper replacement requires matching the⤠mounting method, âlead length and⤠voltage/current ratings since â¤those affect compatibility and â¤reliable operation.Technically, this component âprevents continuous heater operation by changing contact state at its designed trip and reset temperatures, so a faulty unit will â˘either fail to allow the heater to run or âfail to âŁbreak the heater circuit, each producing distinct diagnostic signatures.
- Persistentâ frost or thick ice⤠on the evaporator or rear freezerâ panel despite âscheduled defrost cycles.
- Quiet or nonexistent⢠heater operation during⢠aâ commanded defrost interval while the control⤠boardâ supplies defrost voltage.
- Intermittent âdefrost activity producing cyclical heavy icing and then temporary recovery of cooling performance.
- Multimeter shows no continuity when â˘the sensor is cold (should be closed) or permanent continuity at room temperature âŁ(should open).
Diagnosing a⣠defective⣠defrost âŁthermostat combines visual inspection â¤with simple electrical tests: check for â˘physical damage or corrosion at the contacts âand harness, verify âthe controlâ board is sending voltageâ to âthe defrost circuit during service modeand use a multimeter to âtest continuityâ while the sensor is cooled (placing the sensor in crushed âice and water â˘to simulate a âcold evaporator). A healthy thermostat willâ present near-zero âohmsâ (closed) at cold temperatures and an openâ circuit â¤once warmed; if these transitions do not occur, replacement â˘is⣠indicated.â Also confirm the defrost heater and â¤associated wiring⤠areâ intact, since similar symptoms can ariseâ from an open heater or â˘a failed control board â˘rather than the âŁthermostat alone.
| Item | Description |
|---|---|
| function | Completes and â˘interrupts âdefrost-heater circuit according to evaporator temperature. |
| Normal behavior | Closed (conducting) at low evaporator temps to allow defrost; opens after sufficient warming. |
| Failure indicator | Persistentâ ice accumulation or â˘heater energized continuously; multimeter fails to show correct âopen/closed transitions. |
Troubleshooting Procedures and Diagnostic Testsâ for Defrost Thermostat Circuits
The 5303918202 Frigidaire Refrigerator âDefrost Thermostat⣠is a temperatureâsensing switch mounted against⣠the â¤evaporator or its return bend that controls whether the defrost â¤heater⣠can âbe energized. In normal operation theâ thermostat âpresents⣠a closedâ circuit at low evaporator âŁtemperatures soâ the defrost heater and its control circuit can clear accumulated frost; as the⣠evaporator â˘warms the⢠thermostat âopens to interrupt heater current and⣠prevent overheating. â˘Technicians should understand that this part is a simple bimetal/thermostatic âdevice wired in series with â¤the heater â(and âoften the defrost⣠timer or control â˘board), so correct function depends on both the thermostat’s thermal⣠coupling to the evaporator and matching the electrical rating and mountingâ style when replacing the component.
Troubleshooting starts with a coldâcondition continuity âcheck and âproceeds to inâsystem voltage verification â¤during aâ confirmed⢠defrost cycle. With power removed,measure continuity across the thermostat at ambient and again âafter chilling the sensor â˘(iceâ water or â˘freezer) – a âŁhealthy thermostat will show continuity when cold and open whenâ warmed.⢠If â˘the heater âdoes â˘not â¤energize but the thermostat shows closed when cold, check the âdefrost âcontrol and wiring; conversely, if the thermostat â˘remains open while⤠the âŁevaporator is iced, the thermostat is likely defective and should âbe replaced withâ a compatible unit⢠that matches lead length, â˘mounting clipand current rating. Use⤠insulated jumpers and follow lockout/tagout procedures when bypassing circuits⣠to⢠isolate components â¤during liveâvoltage diagnostics.
- Common symptoms: excessive frost or iceâ on⤠evaporator, frequent compressor short cycling, warm refrigerator compartment despite â˘cold freezer, âdefrost heater never energizing.
- Quick tests: visual â¤inspection, continuity cold/room temp, bench⢠freeze test, measure voltage to thermostat during defrost, temporarily jumper heater âto confirm heater function.
| Item | Description |
|---|---|
| Function | closes⣠at low âevaporatorâ temperature to allow â˘defrost heaterâ current; opens as temperature ârises toâ stop heating. |
| Expected⤠continuity | Closed when cold (allows heater); open when warm (interrupts heater). |
| Location | Clipped to evaporatorâ tube or mounting bracket in the freezerâ evaporator compartment. |
| Test method | Multimeter continuity check⣠cold vs. warm; bench freeze in ice water for verification;â inâsystem voltage check during â˘defrost cycle. |
Q&A
What is the 5303918202 Frigidaire defrost â¤thermostat and what âŁdoes it do?
The 5303918202 is an OEM-style defrost thermostat (also called a defrost bi-metal thermostat) used on many Frigidaire/Electrolux/Kenmore refrigerators. âIt senses the evaporator⤠coil temperature and âcloses⣠atâ cold temperatures to allow current to flow toâ the defrost heater during âthe defrost â˘cycle, then opens as the coil warms to stop the heater when defrosting is complete.
How can I tell if⣠the defrost⤠thermostat is bad?
Common â˘symptoms of a failed defrost thermostat include excessive frost/ice âŁbuild-up on the evaporator, the â˘freezer running continuously or not staying cold, fluctuating⢠temperaturesor â¤the defrost heater not turning on. if the thermostat isâ shorted it can allow the heater to run continuously; âif âit is open it can âprevent the heater from ever âpowering on. Confirm with electrical testing rather than symptoms alone.
How do I test the 5303918202 defrost â¤thermostat?
Unplug the refrigerator and disconnect⤠theâ thermostat.â Use a multimeter âset to continuity or ohms. At normal⢠(warm) room temperature⤠the thermostat will typically⤠beâ open; âŁwhen cold â¤(simulate by placing â˘it in a cup⢠of ice water or a freezer for a few minutes) it should close and show near-zero resistance â(continuity). If it⢠never closes when cold or â˘never opensâ when warmed, it is â¤defective. Always⣠follow safety precautions and check modelâ specs for exact behavior.
Where â¤is⤠the defrost⤠thermostat located⤠and how difficult⤠is it to replace?
The âŁthermostat is âusually clipped âto or âmounted on the evaporator coil âŁinside the freezer compartment behind theâ evaporator cover. Replacement typically involves unplugging the appliance, removingâ interior panels to access the evaporator, âunplugging or cutting the two-wire âŁconnector, âŁswapping âthe thermostatand reassembling. For someoneâ agreeable with basic âappliance repair it is indeed a moderate DIY job; if you are unsure, hire a⣠technician.
Can a refrigerator run without â˘the defrost thermostator can I bypass⤠it?
You â¤should not permanently bypass the â˘defrost thermostat. Bypassing can allow the defrost heater to run continuously and damage the evaporator, â˘temperature controlsor cause food⣠spoilage or a fire hazard. Some troubleshooters temporarily jump the thermostat for a brief test,⤠but â˘permanent operation requires a working âthermostat or correct âOEM âŁreplacement.
What â˘are the electrical characteristics I should⤠expect (terminals, resistance)?
The 5303918202 is a â˘two-terminal bi-metal thermostat with âlow resistance (near 0 ohms) when âclosed and open circuit when open. it is designed to switch the defrost⢠heater circuit,not carry heavy compressor loads. Exact trip temperatures and specifications â¤vary by refrigerator model; consult theâ service manual or OEM spec sheet for preciseâ values.
Is âŁthe 5303918202 compatible withâ my Frigidaire model?
This part isâ used acrossâ many Frigidaire/Electrolux/Kenmore models, but compatibility âŁdepends on the âexact model number and production date. Always verify fit by checking the refrigerator’s parts list, the model cross-referenceor the part number on⢠the old thermostat before ordering. Buying from âa reputable supplier and entering your fridge model number helps ensure the correct part.
Any â¤safety tips â˘orâ best⤠practices when replacing the defrost âthermostat?
Always unplug the refrigeratorâ before⣠starting⢠repairs. Handle the â˘evaporator and coil area⤠carefully to avoid damaging the â¤coil or refrigerant lines. Note wire locationsâ or take a photoâ before disconnecting.â Use OEM or equivalent quality⣠partsand verify the replacement’s mounting âŁand orientation match â¤the âoriginal. If you’re not comfortable with electrical or refrigeration⢠work, hire⣠a qualified appliance technician.
To Conclude
The 5303918202 Frigidaire refrigerator defrost thermostat is a temperature-sensitive âŁsafety âdevice thatâ helps regulateâ the defrost âŁcycleâ by monitoring evaporator temperature and enabling the âdefrost⣠heaterâ only when required. âBy preventing⢠excessive âfrost accumulation and ensuringâ the⢠heater activatesâ at the correct temperature, this thermostat contributes to stable âcooling performance, energy efficiency,⢠and the preservationâ of food quality.
Accurate diagnosisâ is essential when symptoms such â¤as persistent frost⣠build-up, uneven coolingor frequent compressor cycling appear, becuase⣠similar symptoms can result from a faulty âŁthermostat, a defective defrost heater, a malfunctioning âcontrol boardor wiring issues. Testing the thermostat for continuity at the specified temperature range and â˘confirming⤠the operation of⤠associated components âensures⣠theâ correct root cause is identified and avoids unnecessary parts replacement.
When⤠the 5303918202 thermostatâ is confirmed defective, âŁtimely replacement with the appropriateâ OEM or equivalentâ part restores proper defrost function, improves overall refrigerator reliability, âand can prevent âŁmore âcostly repairs. For those without the tools⣠or experience forâ safe electrical diagnosis and replacement, professional⣠service⣠isâ recommended âŁto ensureâ the repairâ is performed correctly and in â¤compliance with safety guidelines.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
