WX28X326 GE 6′ â¤Metal⣠Braided Dishwasher Connection Kitâ is a flexibleâ water-supply assembly designed to connect a household â˘water source to a dishwasher inlet. The âkit typically consists of an inner flexible hose surrounded by a metal braid and factory-fitted âŁend connectors; â˘it functions as aâ pressure-rated supply line that replaces rigid piping or⤠worn rubber hoses in the appliance plumbing. As a standardized replacement part,it is intended to⢠provide mechanical protection,flexibility for installation,and a sealed connection betweenâ the building plumbing and⣠the dishwasher fill valve.
Inside the appliance system the connection kit interfaces directly with the â˘building shutoff valve, the dishwasher’s inlet â˘valve (fill solenoid)and⢠the external water distribution piping. It must withstand âŁnormal residential water pressure and temperature cycles while resisting abrasion, kinking and external damage âthat could lead â˘to leaks. Because it sits at the boundaryâ between household plumbing and the appliance, âits condition affects water⣠delivery rate, the integrity of the seal at threaded or compression fittingsand overall appliance safety; â¤a failure can allow uncontrolled water flow into the surrounding cabinetry and â˘components.
In this article readers will find âŁa technical overview of â¤the kit’s âfunction and construction, guidance on compatibility and â˘selection (length, end-connection type and⢠material considerations), common failure symptoms to watch âfor (visible fraying of the braid, leaks at fittings, bulging or stiffening of the inner hose, â¤and mineral âbuildup), troubleshooting stepsâ to isolate supply-line issuesand practical considerations for replacement and installation such as verifying connector types, ensuring proper seating and torque atâ fittingsand observing basic safety and local plumbing requirements. The goal is to equip technicians, engineers and appliance owners with the â¤details needed to âŁassess, âtest⣠and replace the supply⤠kit â¤reliably and safely.
Table of Contents
- Function and Role âof the Dishwasher⤠water Inlet Connection:⢠Pressure Regulation, flow Deliveryand Leak Containment
- How the WX28X326 GE 6′ Metal âBraided Dishwasherâ Connection Kit Interfaces with the Inlet Valve, Supply Linesand âŁInternal Flow Dynamics
- Common Failure Symptoms â˘and Diagnostic Indicators:⣠External Leaks, Reducedâ Inlet Pressure, Kinked Braidand Corrosion Evidence
- Replacement Considerations and⤠Installation Procedure: Compatibility Verification, âTorque andâ Seal âSpecificationsand PostâInstallation âŁLeak Testing
- Q&A
- To Wrap It Up
Function and⢠Role of the Dishwasher Water Inlet Connection: Pressure Regulation,â flow Deliveryand Leak containment
The WX28X326 GE 6′ Metal Braided âŁDishwasher Connection Kit functions as the supply link⢠between the home’s water distribution and the dishwasher’s inlet valve; it is aâ passive conveyance component designedâ to transmit âŁmunicipal water pressureâ and⣠flow âwith minimal compliance and maximum mechanical protection. Rather than actively regulating pressure, the metal-braided hose and itsâ fittings influence âtransient behavior (damping pressure spikes and preventing rapid expansion seen with unreinforced rubber hoses) and present a predictable hydraulic resistance. As the kit âŁis six feet long and uses⤠a stainless-braided outer sheath⢠with crimped terminations, it provides both routing âflexibility and a consistent flow path⢠that installers⤠can⣠rely on when â˘matching supply valves to dishwasher inlets in tightâ or awkward â˘cabinets.
The assembly’s primary role in leak containment and reliability comes âfrom its âŁconstruction: a durableâ inner tubing, stainless braid to resist abrasion and âcontain small leaksand robust connectors⣠that reduce⤠point-failure ârisk âŁcompared with plain rubber hoses. In practice this means fewer emergency failures and a longer service life, but â˘installers must still⤠check sealing⤠washers, torque fittings correctlyand avoid sharp bends that induce local collapse or flow restriction.Technically, the kit affects delivered flow through minor head loss â˘over âthe hose length and connector geometry, âso if a dishwasher exhibits lowâ fill rates after installation, technicians shoudl verify hose âŁrouting, check for âŁinternal collapse or debrisand confirm inlet-valve compatibility ârather than⢠assuming the appliance is at fault.
- Pressure âbehavior: damps transients but does not replace â¤a pressure regulator.
- Flow delivery: low head loss over 6′ when âproperly routed; avoid kinks⣠and crushed sections.
- Leak containment: stainless braidâ and âŁcrimped fittings reduce spray and extend time-to-failure for âsmall breaches.
- Installation âchecks: verify washer condition, fittingâ tightnessand compatible thread/valve types.
| Item | Description |
|---|---|
| Material | Stainless-braided âouter sheath⣠with reinforced inner tubing for mechanical protection |
| Length | 6 feet – provides routing flexibility and⣠reduces⣠need for additional fittings |
| Typical connection | Designed for standard residential dishwasher inlet âvalves and shutoff valves â(confirm thread typeâ on installation) |
| Primary functions | Deliver supply flow, â˘damp pressure transientsand contain⤠leaks longer than unreinforced hoses |
How the WX28X326 GE 6′ âmetal Braided Dishwasher Connection Kit interfaces with theâ Inlet Valve, Supply Linesand Internal Flow Dynamics
The⤠WX28X326⣠GE 6′ Metal Braided Dishwasher Connection Kit provides the flexible water path between a household supply and the dishwasher’s ⤠inlet valve.The assembly consists of a reinforced inner liner enclosed by a stainless-steel â˘braid and terminating in âŁcompression-style fittings that â¤match the common appliance âŁinlet interfaces used on many residential dishwashers; however, verify the âvalve thread and ferrule type before installation. Mechanically, the compression nut âand ferrule create the âpressure â˘seal at the â˘inlet valve while the braid⤠resists kinking and abrasion, allowing the hose to be routed âthrough⢠cabinetsâ without collapsing under bends. âWhenâ mating to the dishwasher inlet and the supply stop, ensure the ferrule seats âagainst the valve body; â˘hand-start âthe fittings, then tighten toâ the manufacturer’s⢠recommended torque to avoid deformingâ the ferrule or damaging the valve seat.
Hydraulically, the kit’s internal⤠diameter and six-foot length produce a small, predictable âŁpressure drop compared with âŁa shorter rigid line; under â˘normal household pressures this drop rarely limits⤠dishwasher⢠performance, but it becomes noticeable âif the supply pressure is âŁalready low or if multiple fixtures draw water simultaneously. The stainless⤠braid⣠dampens vibration and reducesâ the risk of hose fatigue, but sediment and scale can still affect the inletâ valve screen upstream ofâ the hose, âso inspectâ and flush the supply if flow is reduced. For⣠practical installation: âavoid sharp âŁ90°â bends and contact with heat sources, secure the hose to prevent chafingandâ test the connection under full-cycle water conditions to confirm there are no â˘leaks â˘or flow restrictions that could affect fill times or spray performance.
- Material: stainless-steel braid over a reinforced inner liner for abrasion resistanceâ and flexibility
- length: 6 feet for extended routing behind cabinets âor around obstructions
- Fittings: compression-style ends – confirm size and ferrule⤠compatibility â¤with the inlet valve
- Installation notes: route to avoid âkinks, tighten fittings to proper torque, test for leaks âand adequate fill rate
| Item | Description |
|---|---|
| Fitting type | Compression-style endsâ commonlyâ used on appliance inlets; verify actual thread/ferrule before use |
| Inner liner | Flexible, fluid-compatible tube⣠that governs effective inner diameter and flow âcharacteristics |
| Braid | Stainless-steel braid protects â˘against abrasion, âŁresists kinkingand dampens vibration |
| Effect⣠on flow | Moderate pressure⤠drop over 6 ft; usually negligible at normal âhousehold pressure but relevant if supply âpressure is low |
Common Failure Symptoms andâ Diagnostic Indicators: External Leaks, âŁReduced Inlet âPressure, Kinked â¤Braidand Corrosion⢠Evidence
The WX28X326 âŁGE 6′ Metal Braided Dishwasher Connection Kit âis a⢠flexibleâ supply assembly used to route potable water from aâ household shutoff valve to the dishwasher inlet. Its stainless-steel braided outer jacket provides mechanical protection and abrasion resistance while an inner liner carries the flow; the assembly performs as a plumbing flexible connector rather than⤠a pressure regulator â¤or⢠valve. Technicians should verify⢠thread type and valve compatibility before installation and ensureâ the hose length and routing⤠do not introduce sharp bends or contact with heatâ sources that can accelerate wear or degrade the liner.
Common failure indicatorsâ are externally âŁvisible and measurable: water at the⣠compression nut or along the braid âindicates a sealing or fitting failure; reduced inlet pressure presents as extended fill cycles, weak sprayor detergent not dispensingâ properly and âcan result from internal liner collapse,⤠partial kinkingor â˘sediment restriction. Visual inspection for flattened braid, bulging, discoloration, green or white mineral depositsand pittingâ at ferrules points to â˘mechanical damage or corrosion that compromises âthe assembly. Practical diagnostics âinclude a pressure or âflow check at the shutoff valve with the hose âŁdisconnected,â a run-cycle observation to correlateâ fill time with âexpected behaviorand close⢠inspection â˘of fittings â¤underâ load; âreplace theâ hose if any metal âfatigue, delamination of the lineror persistent low flow remains after correcting ârouting and valve issues.
- External leaks – visible seepage at⣠connection, wet cabinets or floor stains; checkâ torque on⢠fittings and condition âof ferrules.
- Reduced inlet pressure – long fill times, weak spray; testâ flow at â˘the valveâ and inspect for internal collapse or debris.
- Kinked braid â˘- localized flattening or sharp bends causing flow restriction; reroute or replace if permanent deformation âis present.
- Corrosion evidence – discoloration, pittingor âflakes at fittings; indicates replacement to prevent sudden failure.
| Item | Description |
|---|---|
| External leak | Seepage at nut or along braid-frequently enough a seal/ferrule failure or loose fitting. |
| Reduced inlet⢠pressure | Longer than normal fill cycles caused by obstruction, liner collapseor valve restriction. |
| Kinked braid | Permanent deformation that reduces flow; replacement recommended if âflow does not recover when straightened. |
| Corrosion evidence | Mineral deposits,â pittingor rust at connections indicating metal âdegradation and imminent⤠failure risk. |
Replacement Considerations and â¤Installation procedure:⤠Compatibility Verification, Torque and seal Specifications, â¤and PostâInstallation Leak Testing
The WX28X326 GE 6′ Metal Braided Dishwasher Connection Kit âprovides a flexible stainlessâbraid supply line that bridges the household âshutoff valve âand the⢠dishwasher inlet; verifying compatibility before replacement prevents mismatched threads, poor sealingand mechanical stress on the inlet. Confirm⤠the appliance â¤inlet thread type (compression vs.â straight pipe/NPT), the nutâ size used⢠by the dishwasher elbow, the orientation of the supply valveand available clearance behind theâ cabinet for a 6′ hose run. In practice, an installer should inspect âthe dishwasher’s âinlet elbow (some models use a âŁ90° elbow or require a⣠ferrule-style âcompression connection), confirm that âthe supply valve supplies standard household pressuresand checkâ thatâ anâ adapter⢠is available if the home plumbing uses aâ different thread standard â˘or larger âshutoff valve spacing.
- Verify inlet type and nut âŁsize on both dishwasher and shutoff valve; identify âŁcompression vs. tapered (NPT) threads.
- Shut off water, relieve pressureand⤠drain the line before disconnecting the old hose.
- Handâstart fittings, then apply measured wrench turns; avoid kinking â˘or twisting the braid during routing.
- Pressurize and perform static and operational leak checks⢠(soap test, run a fill cycle), then recheckâ after initial cycles.
| Item | Description |
|---|---|
| Thread/Seal âtype | Compression fittings seal via â¤ferrule; tapered/NPT require thread sealant or PTFE tape. Do not âuse tape onâ compression ferrules. |
| Tightening guideline | Engage â˘threads fully by hand, â¤then apply a short controlled wrench turn (typically ~1/4-1/2 turn) to seatâ the ferrule; avoid overâtorque⣠that can deform fittings. |
| Household pressure | Typical domesticâ supply pressure ~40-80 psi; verify local pressure if extremes are suspected before installation. |
Torque and sealing behavior differ by connection type: compression nuts⤠rely on a properly seatedâ ferrule and mechanical compression rather than pipe â¤tape, while tapered pipe threads â¤require a compatible thread sealant to prevent seepage. Do not overâtorque compression nuts-excessive force can crush the ferrule or crack the inlet port; if manufacturer torqueâ values areâ available, use a torque wrench to â¤those specifications. After âŁmaking connections, open the valve slowly to observe initial â˘sealing, conductâ a â˘soapâsolution bubble â˘testâ at each joint, then operate a dishwasher fill/drain cycle to verify dynamic âŁintegrity. monitor the connections for the first 24-48 hours of use and reâinspect afterâ any cabinet access or movement of the appliance to ensure no loosening or âŁchafing âŁhas occurred. â
Q&A
is the WX28X326 GE 6′ Metal Braided Dishwasher⣠Connectionâ Kit compatible with⤠my dishwasher?
WX28X326 is âaâ replacement water⤠supply (inlet) hose intended for many GE dishwashers and other â¤brands that use a âstandard supply connection. â¤Compatibility depends on the dishwasher inlet âfitting⣠size and thread type – most domestic dishwashers âuse â˘a 3/8″ compression inlet, but some use other sizes or elbow⣠fittings. Verify your dishwasher owner’s manual or remove the old hose and compare⢠fittings before purchasing.
What type âof âfittings does⣠the kit use âand do I need any adapters?
Replacement dishwasher supply hoses like this typically haveâ standard compression-style fittings designed to mate with common shutoff valves âand dishwasher inlet â¤fittings.If your shutoff âvalve or dishwasher inlet âuses a âdifferent size or thread type,â you may need a compatible adapter or a different hose. Do â˘not assume thread â˘sizes – measure âor check documentation to be certain.
Can âI installâ the WX28X326 myselfand what are the basic installation steps?
Yes – a competent DIYer or a âtechnician can install it. Basic steps: shut off the water at the home shutoff valve,⣠run the dishwasher to⣠relieve pressure, disconnect the old hose, check that threads and ferrules are âŁclean, hand-start the new hose onto the fittings âŁto avoidâ cross-threading, tighten with a wrench (do not over-tighten), turn water back on and checkâ for âleaks.Follow the manufacturer’s instructions and local plumbing codes.
Should Iâ use Teflon (thread) tape or pipe dope on the hose fittings?
Most supply hoses use⤠compression-style fittings that seal â˘with a ferrule, so âyou should not use Teflon tape on the compression seat. Tape is appropriate for tapered pipe threads âŁ(NPT) â¤but not for standard compressionâ fittings. If the hose or fitting instructions call for a specific âsealant, follow âŁthose instructions.
What areâ the temperature and pressure limits for this braided metalâ hose?
exact temperature and pressure âŁratings vary by manufacturer and batch, so check the product label or packaging for the specific ratings. In general,â stainless-steel braided household supply âhoses âare rated forâ typical domestic water pressures and hot â¤water temperatures (commonly up to around 150-180°F and âsuitable for standard household water pressure). Do not exceed âthe printed maximums onâ the⤠actual part.
What should I do if the connection leaksâ after installation?
First, tighten the fitting a little more (hand-tightâ plus a partial âwrench⤠turn).If itâ still leaks, shut the water off, disconnect and inspect the ferrule and â¤mating surfaces for damage or debris, re-seat the ferrule and re-install. Replace the hose or ferrule if damaged. If you have tapered threads, check for proper sealant. If unsure, call a plumber – do not âŁovertighten,⣠since that can damage the fitting and cause leaks.
Can this hose be used as the dishwasher drain hose or for other purposes?
No.The WX28X326â is a pressurized water supply line (inlet) and is not designed or approved for use â˘as a drain hose. Do not use it for drainage or other unintended applications. âAlways use the correct hose type for each purpose.
How long will the metal braided hose last and how often should it beâ replaced?
stainless-steel braided âŁhoses are moreâ durable⤠thanâ plain vinyl hoses and can last many years, but they are not permanent.⤠Inspect annually â˘for⤠signs of â˘wear, kinks, fraying of âthe braid, corrosionor leaks.⣠Replace the hose promptly if you see âany âŁdamage. Many technicians â¤recommend replacing supply hoses every 5-10 years or sooner if âŁlocal codes or âinsurer recommendations require it.
To Wrap It Up
The â˘WX28X326 GEâ 6′ Metal Braided Dishwasher Connectionâ Kit serves âas a critical component in the dishwasher water â˘supply âsystem, providing â˘a durable, flexibleand corrosion-resistant connectionâ between the household plumbing and the appliance. âIts metal braided constructionâ and appropriate length help minimize stress on fittings, reduce the risk of kinkingand provide a reliable pathway for water, contributing to overall appliance performance and household water-safety.
Accurate diagnosis of supply-line⢠issues is â˘essential for preventing water damage andâ ensuring safe âoperation.Homeowners and technicians should inspect connection kits â˘regularly for signs â˘of wear, fraying, corrosion, leaksor loose fittingsand âconsider replacement when these indicators are present or when the kit reaches the manufacturer-recommended service life. Prompt⣠identification and action⣠reduce the likelihood of premature failures andâ associated repair costs.
When replacement is⢠necessary, selecting a compatible kit such as the WX28X326 and following proper installation procedures-whether performed⢠by a qualified technician or a educated homeowner-helps âŁrestore⢠a secure âwater connection and maintain appliance reliability. Adheringâ to manufacturer guidelines and local plumbing codes ensures safe,long-term operation and⢠minimizes the⢠risk ofâ water-related incidents.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
