316455461 frigidaire Wall Ovenâ Electronic Clock/Timer is the factory electronic clock/timer assembly used in many Frigidaire built-in and wall oven models; it is a âuser interface and timing/control module⣠that combines a display, pushbutton or touch controlsand a small⢠control PCB to provide âŁtimekeeping and âŁtimed-cook functions. The â¤component typically includes âan LED/LCD time display, input switches or capacitive sensors, a microcontroller for timekeeping and user interface logicand connectorized wiring that mates â˘to the oven harness. As a discrete replaceable âassembly, it is indeed commonly referred to as the clock/timer or control clock and is identified â˘by part number â316455461 for ordering⤠and compatibility checks.
Functionally, the⤠clock/timer acts as the human interface âfor setting the oven clock, minute timer, âdelay startand timed bake/broil cyclesand it âissues control⤠commands to the oven’s â¤main power control circuitry. It interacts electrically and logically with the line-voltage switching elements (relays or triacs) on the⣠oven control board, the user-input circuitsand the mainsâ power feed for timekeeping and display backlighting; it may also share sensor data or â¤status âsignals with the main control board depending on the oven model. From â˘a⣠technician’s outlook, the âclock/timer occupies both low-voltage logic⤠domains (microcontroller and display) and âcontrol signaling roles that influence high-voltage switching elsewhere in the appliance, â¤so its failures can manifest as user-interface faultsâ or as indirect âoperational faults in â˘heating⢠and timed sequences.
In this article readers will learn how the 316455461 clock/timer functions within the appliance architecture, which oven models⣠and control harness configurations it is compatible⢠with, common failure symptoms to recognize (for example blank âor garbled display, non-responsive timer functionsor failure to initiate timed cookâ cycles)and methodical âtroubleshooting steps toâ isolate the module from wiring and main control issues. The piece âwill also cover practical âŁreplacement considerations-matching part numbers and âconnector types, verifying power and dialog signals before âreplacement,⤠handling precautions for electronics âand⤠reassemblyand âŁverification checks after installation-so technicians, engineersand informed appliance owners âcan identify, diagnoseand address clock/timer related faults in Frigidaire wall ovens.
Table of Contents
- Function and Role of âtheâ Electronic âŁClock/Timer in Frigidaire Wall⣠Ovens
- How the 316455461 Frigidaire Wall Oven Electronic Clock/Timerâ Works Inside the Appliance
- common Failure Symptoms⢠and diagnostic Indicators for the Electronic Clock/Timer
- Compatibility, Replacement Considerationsand Step-by-step â˘Installation for the 316455461 Clock/Timer
- Q&A
- Insights and Conclusions
Function and Role of the Electronic Clock/Timer in Frigidaire Wall⣠Ovens
The 316455461 Frigidaire Wall Oven Electronic Clock/Timer functions as both the user interface clock and the timing controller âfor scheduled oven operations. It displays time, manages countdown/count-up timers, accepts and debounces keypad inputsâ for timed cook and delayed-start eventsand issues logic-level timing signals âto the â¤main control board to enable⤠heating âŁelements, fansor door lock sequences. In many installations the module also â¤sequences self-clean⢠intervals and coordinates the door-lock actuator timing; retention of âprogrammedâ events across aâ mains outage⣠depends on⢠the oven â¤model’s backup design and should be verified for each unit.
Faults in âthis module typically produce symptoms â˘such as anâ inaccurate or blank clock display, unresponsive timer â¤functions,⤠inability to initiate⤠delayed-bake âcyclesor intermittent control of timed elements. Technicians diagnose these issues by confirming correct lineâ voltage to the module, inspecting the multi-pin harness and connectors â¤for corrosion or broken wires,â and verifying that the clock/timer is issuing trigger signals to the main control when â˘commands areâ entered. The following list summarizes the module’s primaryâ functions and interfaces, useful⣠for troubleshooting and compatibility checks.
- front-panel timekeeping and LED/LCD displayâ of⤠clock and timer status
- Countdown/count-up andâ delayed-start programming with user input handling
- Timing outputs to the main control board (logic-level signals to relays/triacs)
- Sequencing for self-clean and door-lock timing where âimplemented
- Physical â˘and âelectrical compatibility requires verification of harness,mounting,and control firmware/version
| Item | Description |
|---|---|
| Part number | 316455461 |
| Function | Front-panel clock,user timer,and timing interface to âoven control |
| Typical âsupply | 120 âVAC service on North American models; verify voltage on service tag |
| Connector | multi-pin ribbon/harnessâ to main control-confirm pinout before replacement |
How the 316455461 Frigidaire Wall Oven Electronic Clock/Timer Works Inside the Appliance
The 316455461 Frigidaire Wall Oven Electronic âClock/Timer is⣠a âuser-interface and timing module that performs timekeeping,countdown/timed-cook functions,and provides the visual display and buttonâ inputs for the oven. Internally â˘it combines a small â¤microcontroller or realâtime clock circuit,a display driver (LED/7âsegment or âVFD),and an input matrix for⤠the⤠touchpad or pushbuttons. The module does not directly⤠switch the high-current bake or broil âŁelements; ratherâ it issues controlâ commands or momentary contact signals â¤to the oven’s main control board that then energizes relays or solid-state switches. For practical service work, verify the part’s connector pinout and firmwareâ family before replacement-differences â˘in wiring or signal conventions between model years can âcause a mechanically identical assembly to be incompatible with a particularâ oven controlâ board.
- Typical interfaces: multiâpin harness (Molex/ribbon), discrete start/stop contacts or logic-level signalsandâ a local⤠timebase (RTC or⤠crystal).
- common faults: blank display (power feed or⢠fuse),â unresponsive keys (membrane failure orâ MCU fault)and timers that count but do not actuate the â˘ovenâ (failed signaling or âcontrolâboard fault).
- Service checks: inspect â˘harness and connector, measure supply voltage at the module pins, âŁand observe the control board’s relay behavior when initiating timed events.
From a functional perspective the clock/timer behaves⣠as a lowâvoltage control and status device: it maintains â¤elapsed or âwall-clock time, debounces and interprets user inputsand sequences outputsâ that the âŁmaster control uses to schedule âheating cycles. âCommunication â˘to the master control is often implemented as âa small â˘set â¤of contact closures or as digital lines (openâcollector or TTL/CMOS levels) ratherâ than a highâspeed serial⤠bus, so technicians should test both the physical contact behavior and the logical signal levels⤠during diagnostics. In practice, replacing this âmodule requires âmatching the electrical interface and display format; when a timer counts correctly butâ the oven does not start on schedule, measure the outgoing control lines â˘from the clock/timer and the corresponding inputs on the âmain control to determine whether the fault liesâ in the timer module, the â¤harnessor the relay/drive stage on the main board.
| Item | Description |
|---|---|
| Power input | Derived from the âoven supply â(typically one leg of theâ 240 V âservice â â120 âVAC to the electronicsor an internal lowâvoltage regulator/transformer). |
| Control â¤output | Momentary contact closures or lowâvoltage logic lines to the main âcontrol that ârequest timed events or start/stop actions. |
| Display/input | LED/7âsegment or VFD display drivenâ by a display driver âIC; keypad is a matrix âŁor⤠membrane switch read by the module MCU. |
Common Failure Symptoms and Diagnostic âIndicators âŁfor the Electronic Clock/timer
The 316455461 Frigidaire Wall Oven âElectronic Clock/Timer is the printed circuit module that provides the user interface, timekeepingand timed control signals to the oven’s main control system. It manages the⤠visible display, key inputs for â¤setting timers and delayed startsand a timing relay or logic output that⣠commands bake/clean functions at specified times. Functionally the module is both a low-voltage logic board and a switched-power interface: it frequently enough receives line or switched line voltage for âŁits display and relay drivers⤠while also containing digital circuitry and a⢠small â¤memory/backup⢠element that retains clock settings across âbrief power â¤interruptions.
- blank or dim display – noâ power to the â¤module,⢠blown panel fuseor⣠display âŁdriver failure.
- Clock resets or loses âtime after power interruptions – failed backup capacitor or internal memory fault.
- Unresponsiveâ keypad or stuck keys – degraded membrane/keypad contacts or connector corrosion.
- Timer won’t start oven at set time – failed relay/contacts on the timer output âor logicâ output â˘not energizing.
- Intermittent operation or erratic âŁbehavior – loose wiring harness, cold solder jointor intermittent component failureâ on the board.
Diagnosing theâ clock/timer requires both visualâ inspection and electrical verification. Start with a harness and connector check for burned pins, brittle insulationor loose mating; measure the expected supply at the module connector with a multimeter â¤(verify line/switch voltage and any required low-voltage logic⣠supply per the appliance wiring diagram). If the⤠display is blank but other oven functions operate, isolate the panelâ power feed and test the panel’s internal fuse and rectifier/voltage regulator circuits. For â˘timing-outputâ failures, energize the timed function while measuring continuity âacross the⣠timer relay⣠or output contacts; a closed â¤contactâ when the â˘timer⢠calls for heat⣠indicates the module is signaling correctly and shifts the fault to downstreamâ wiring or the main control relay.
| Item | Description |
|---|---|
| Blank display | Check⢠incoming panel power, panel fuse,⤠and display driver circuitry for open circuits or failed components. |
| Clockâ resets | Inspect backup capacitor or⤠memory circuits; verify voltage retention across power interruptions. |
| Timer fails to actuate oven | Measure output contacts/relay when timer is active; âŁtrace â˘continuity to main control and heating element relay. |
compatibility,⤠Replacement Considerationsand Step-by-Step â¤Installation for the 316455461 Clock/timer
The 316455461 Frigidaire Wall Oven Electronic Clock/Timer â¤performs both⢠user interface and timing/control roles for the oven’s control system. It contains the⢠clock⤠display, keypad inputsand a âsmall control board that manages timed functions (cook âtimer, â˘delayed startand clock-driven events) âŁand forwards user commands to the main â¤oven control. Electrically it typically runs â˘from theâ oven’sâ 120 VAC supply â˘for the display and uses low-voltage signaling or relay control âto⤠communicate with â˘the oven controller; mechanical compatibility is driven by mounting bracket dimensions and the mating âwiring harness. When replacing this module, confirm the âŁpart number and connector pinout – identical-looking assemblies can have different firmware âor connector assignments that change behavior such as⤠timed cook accuracyâ or keypad response.
Replacement and⤠installation require verifying power isolation, connector⤠mappingand functional testing after reassembly. Before ordering, compare the old module’s label and harness â¤to the new unit and inspect the backing foam, bezel⣠tabsand screw locations â¤to ensure a flush fit and proper sealing â¤against heat. Basicâ replacement⢠stepsâ include:
- Disconnect power at the breaker and verify⢠no⣠voltage âŁat theâ oven control with a multimeter.
- Remove the oven trim/bezel to access âtheâ clock assembly, then unscrew the mounting screws and gently pull the module forward.
- Document or photographâ connector positions, then unplug the harnesses and transfer any ground or retaining clips to the new unit.
- Fit the replacement, reconnect harnesses in the original positions, secure the module, reassembleâ the âtrimand restore power.
- Perform functional checks: set the clock, run a timer,⢠and verify bake/broil cycles and âdisplay/keypad responsiveness; recheck âafter a short cook cycle for âthermal stability.
| Item | Description |
|---|---|
| Part number | 316455461 – verify against the original label and harness |
| Supply | Display/control poweredâ from oven 120 VAC;⤠logic signals to main control |
| Connector | Flat multi-pin harness; confirm pinout âand locking tab orientation |
| Common symptoms | Blankâ display, â˘unresponsive keypad, incorrect timer behavior âŁ- often harness or failed board |
Q&A
How do I set the clockâ on the 316455461 Frigidaire wall oven electronic clock/timer?
Most â¤Frigidaire clocks âŁuse a â¤dedicated “Clock” pad or a combinationâ of pads.Briefly press the Clock pad (or âpress and hold if required), enter the time using the +/- pads or number pads, then press clock or Start to confirm. Because button labelsâ and sequences can vary by oven model, consult your oven’s user manual⣠forâ the exact â¤keystroke sequence if the genericâ method does⤠not work.
Why is the timer not counting down even though I set it?
Common causes are not starting â˘the timer after setting it (some models require pressing Start), the control being in a different mode (e.g., bake/clock vs. timer)or âa faulty touchpad/control board. First ensure⣠you finish the sequence correctly (set âŁtime then press Start). If the timer still won’t run, try resetting the control by switching the house breaker off for 30-60 seconds and back âŁon. If the problem âpersists, the electronic clock/timer â˘or the front touchpad âmay be defective and require replacement.
The⣠display is blank on the 316455461 unit – âwhat should I check?
Start by confirming the oven has⢠power (check â¤the⣠circuit breaker and supply).⣠If the oven has power but the display is blank, an internal fuse or thermal cutout on the oven’s control âŁboard âmay have openedor⢠the clock module itself may âhave failed. Disconnect power before inspecting. If you’re pleasant, check for a blown internal fuse âor burned connector; or else contact a qualified technician. Replacing the controlâ module or repairing wiring âis often necessary when the display remains dark.
Can I replace the 316455461 electronic clock/timerâ myselfand âwhat safety⤠steps⢠should I follow?
Yes, a competentâ DIYer can replace the module, butâ you must⢠disconnect all power first by switching off the oven circuit⣠breaker and verifying power is off. Typical steps: remove the control panel bezel, unscrew the module, unplug the⣠wire harness connectors, swap in the new⤠module, reconnect â˘harnesses, âand reassemble. Use appropriate screwdrivers and keep track of screws. Ifâ you’re not comfortable working with mains voltage or accessing internal components, hire a licensed appliance technician.
How â¤do I verify⢠that part 316455461 is the correct replacement for my Frigidaire oven?
Confirm compatibility by matching â˘the oven’s full model number (found on the oven frame, door edgeor manual) with the replacement part listing. Many parts distributors⢠and Frigidaire’sâ partsâ website allow you to enterâ your oven model â˘and will show compatible parts. Do not rely solely on the oven â˘brand – several models may⣠use different â¤clock modules despite similar appearance.
After a power outage the clock/timer is wrong or unresponsive – how do I reset it?
Power outages can reset the control. Toâ restore, simply âset the correct time using the â¤Clock function. If the unit is unresponsive after power is restored, turn the oven breaker âoff for 30-60 seconds to âforce a control reboot. Persistent unresponsiveness can indicate a failing control board or shorted keypad and mayâ require replacement or professional diagnosis.
What are âŁcommon error codes related to the electronic clock/timer and what do they mean?
Error codes⣠vary by oven control firmware. Codes that appear on the display may â˘indicate keypad faults, controlâ board failures,⤠or sensor/communication problems rather than the clock itself. Because codes differâ between models, refer to your âoven’s service manual for specific code meanings. If you don’t have the manual, note the exact code âand âcontact frigidaire support or a service technician for interpretation and repair advice.
Are⣠there maintenance or âcleaning tips to extend the life of the 316455461 clock/timer?
Keep the control panel clean and dry – wipe spills promptly with a soft, damp cloth and avoid abrasive cleaners or excess moisture, whichâ can damage the âtouchpad and connectors. Avoid using spray cleaners directly on the display. If food or liquid⤠entersâ behind the panel, disconnect⤠power⢠and have a technician âcheck for damage. Proper care of the front assembly reduces corrosion and keypad failures.
Insights and Conclusions
The 316455461 Frigidaire Wall Oven Electronic Clock/Timer serves as a central interface and control element for timing, scheduling and display functions within compatible wall ovens. By managing cookâ times, delaysand âŁalerts â¤while communicating with the oven’s control circuitry, the module⤠contributes âdirectly to cooking accuracy, convenience and safe operation; when functioning properly it supports consistent results and user â˘confidence in the appliance.
Because symptoms⣠such as incorrect timekeeping, unresponsive controls or erratic âtimer behavior can stemâ from a range of causes, accurate diagnosis is essential⢠before replacing the module. âŁConfirming the fault, verifying compatibilityâ and using quality replacement parts-along with professional installation when appropriate-helps restore full functionality, avoids needless expense and preserves âŁsafety and reliability. Proper diagnosis andâ timely replacement ensure the⣠oven continues to perform as intended.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
