WB16K10026 GE Oven Range Stove Cooktop â˘Double Burner is a replacement surface heating element assembly for GE electric ranges and ovens, designed as a dual-zone cooktop burner to provide â¤selectable heating for âcookware. The component typically includesâ the heating element(s), â˘terminal connectors and mounting hardware and is defined byâ its electrical âratingsâ (resistance and wattage) and its âŁphysical interface to the cooktop or⢠burner well⤠to ensure âproper fit and operation â¤within the appliance.
Inside the applianceâ the WB16K10026 serves as the primary âheat-generating âelement for a cooking â¤zone and interfaces directlyâ with the range’s power⤠supply, terminal block,â surface infinite-switch or electronic⢠control board, âand the wiring harness.It also âŁinteracts with ancillary systems such as hot-surface indicators, âthermal cutouts and grounding paths; the element’s electrical characteristics and â˘mechanical mounting effect control âbehavior, circuitâ loading and overall heat distribution, so correct installation and secure electrical connections are important âŁfor safe, reliable operation.
in this â˘article readers will learn â˘the component’s functional role, âŁhow to confirm compatibility âby checking model numbers, âterminalâ type and electrical specificationsand typical failure symptoms such â¤as no heat, uneven âŁheating, intermittent⢠operation or tripped breakers. The guide⢠will outline practical troubleshooting steps-visual inspection, continuity and resistance testing, isolating theâ element from control circuits-and replacement considerations including â˘matching âwattage and mounting style,â safe disconnection and reconnection procedures,â and verification steps âto confirm correct operation after service.
Table of Contents
- Function and Role: Power âRatings, Mountingand Electrical Interface â˘of theâ Cooktop Double Burner
- Internalâ Construction and⣠Operation of theâ WB16K10026 GE⤠Oven Range âŁStove Cooktop Double Burner
- Common Failure symptoms andâ step-by-Step Diagnostic Procedures âŁfor âŁthe Cooktop Double Burner
- Compatibility, Parts Interchange,â and â¤Replacement/Installation Guidelines
- Q&A
- In⣠conclusion
Function and Role: power Ratings, Mounting, â˘and Electrical Interface of⢠the Cooktop Double Burner
The WB16K10026 GEâ oven Range Stove â¤Cooktop Double Burner functions as âthe primary âŁheating element assembly for a two-ring or â¤dual-circuit surface â¤burner,â convertingâ incoming mains electrical âpower into controlled heat for cookware. In practical terms the part âhouses resistive⣠coils âand an insulating mountingâ plate and is designed to operateâ on standard â¤residential range line voltages; actual⣠wattage varies âwith element diameter and whether the inner and â¤outer circuits âare âŁused independently or together. Such âas, âa small⣠inner element may draw â˘roughly 1,000-1,500 W⤠while the outer ring âŁcan add another 1,500-2,500 W when â˘energized,â allowing combined outputs suitable for a 2,000-3,500 W burner on high settings. Understanding these power âŁranges helpsâ technicians⢠size⣠wiring,⤠protectionand controls when replacing or testing the WB16K10026 GE Oven Range Stove âŁCooktop Double burner in â¤service diagnostics.
- Nominal âvoltage: ⤠residential line voltages â(refer to appliance âŁwiring schematic before replacement).
- Connection: â¤quick-disconnectâ spade terminals or screw studs depending on model batch.
- Mounting: â drop-in or bracketed â¤mounting with insulating spacers to âŁthe cooktop âdeck.
- Behavior:⢠dual-circuit elements âcan be switched âseparately for simmer or full-power operation.
Mounting and electricalâ interface choices affect both compatibility andâ safe â˘operation: the element must sit flat against the cooktop opening with âŁcorrect clearance â¤and thermal insulation to prevent heat transfer to wiring or control assemblies. Electrical connections typically use color-coded âleads and 1/4″ spade terminals or threaded studsand replacementâ must match the original terminal⤠configuration to⢠maintain âŁproper switching and thermostat âcontrol; if â¤the original element uses two circuits,â reversing or mis-wiring those circuits can cause disproportionate heating⢠or damage⢠to the ârange control. For troubleshooting, check continuity across each âcircuit, inspect⢠terminal integrityand verify that mounting hardware and insulating pads âare intact to⢠avoid âhotspots âand ensure expected âthermal⤠behavior when the WB16K10026 GE Ovenâ Range Stove Cooktopâ Double Burner is installed.
| Item | Description |
|---|---|
| Voltage | Residential range voltages â¤(verify appliance wiringâ diagram) |
| Typical power range | Inner â1,000-1,500 W; outer 1,500-2,500 W (combined up to ~3,000-3,500 W depending on element size) |
| Connection type | Quick-disconnect spade terminals or threaded studs; match⢠original configuration |
| Mounting | Drop-in/bracketed with insulating pads and screws⢠to cooktop deck |
Internal Construction and Operation âŁof the WB16K10026 GE Oven Range Stove Cooktop Double Burner
the WB16K10026 GE Oven Range Stove Cooktop⣠Double Burner⣠is a dual-zone⢠resistive âheating assembly that combines two â¤concentric heating circuits into a single replaceable â¤module. Internally,â each circuit consists of a wound resistive element embedded on a high-temperature â¤insulating core, enclosed by a âŁstampedâ steel mounting plate and protection sheath;â theâ two circuits⤠share a common âŁterminal block and mounting flange to interface directly with the cooktop surface and the appliance wiring harness. The assembly also incorporates⤠high-temperature ceramic or mica insulation, quick-connect spade âterminalsand a thermal cutoff/insulation barrier where required to âŁprevent heat â˘transfer to adjacent wiring or control components.
- Dual concentric elements⣠for inner/outer zone control
- common terminal block with separate leads for each zone
- High-temperature insulation and metal⣠mounting flange
- Designed⣠to mate⢠with GE infinite switches or electronic controls
| Item | Description |
|---|---|
| Heating circuits | Two⢠separate resistive coils allowing independent or combined heat output |
| Terminals | Spade connectors to match factory wiring harness and â˘switch outputs |
| Mounting flange | Stamped steel plate with tabs that secure the element to the cooktop opening |
During operation, control knobs or the electronic control⣠module route mains voltage through the âinfinite switch or relay to one or both resistive coils; selecting⣠the inner zone, outer zoneor⢠both changes the effective resistance and heat distribution, providing a coarse âform⣠of powerâ modulation without additional⤠electronics. Technicians âŁcan diagnose faults by measuring continuity of each circuit, checking for insulation resistance to chassisâ groundand visually inspecting terminals and â¤the mounting âŁflange âfor heat damageâ or corrosion. For compatibility, replacement unitsâ must match the âoriginal terminal layout, mounting tab spacingand voltage rating to ensure proper electrical and mechanical âfit; when replacing the WB16K10026 GE Oven Range Stove Cooktop⤠Double Burner, âconfirm that the control switch type and harness âconnectors match⢠the oven model to avoid incorrect power âdistribution or⢠unsafe connections.
Common Failure Symptoms and Step-by-Step âDiagnostic â˘Procedures for the Cooktop Double Burner
The WB16K10026 GE⤠Oven â¤Range Stove⤠Cooktop Double Burner âis a concentric heating element⣠assembly âdesigned âto provide two selectable heating zones-inner and outer-on a GE range cooktop. Functionally, â˘the assembly â¤transfers electrical energy into heat through resistive elements and connects to theâ range’s infinite switch or electronic control via a terminal block; proper operationâ requires secure terminal âconnections, correct terminal âŁorientationand a matching voltageâ feed. In practical use, technicians will see behavior such as single-zone heating (only inner⢠or⣠outerâ ring âactive), reduced outputâ under â¤loador intermittent operation caused by open element coils,⢠degraded terminal connectionsor a failing control âswitch; for example, the outer ring may remain cold while the inner ringâ heats, which typically⢠indicates an open⣠outer coil or a wiring/terminal fault ratherâ than a control problem alone.
- No heat from âeither ring (possible âopen element or lost supply to the âburner).
- One⣠ring heats while the other does not⤠(open coil⤠or â¤poor terminal connection⤠on the affected zone).
- Intermittent âheating or cycling unrelated to control â¤settings (loose terminals⤠or â˘failingâ infinite switch).
- Visible discoloration,cracking,or arcing at terminals (insulation breakdown or terminal block damage).
- Breaker trips or short-like behavior⤠when the burner âis energized â(shortâ to ground or damaged wiring).
Diagnostic procedure should be systematic: first, isolate power at the breaker andâ perform a visual⣠inspection for cracked element insulation, â¤burned terminalsor⢠detached wiring; then verify âcontinuity across theâ element⢠leads with a multimeter-an open reading âindicates a failed coil. Next,restore power briefly and verify âthe incoming line voltage at the â˘burner terminals while exercising the âŁcontrol (use proper live-voltage safety âpractices); if voltage â˘is present but the element remains cold,the element is at fault. if both element continuityâ and supply voltage are confirmed, check the infinite switch or control module by measuring⣠for switched output continuity as the âcontrol is turned through its â˘settings or by substituting a known-good switch.⢠inspect and,if necessary,replace⤠the terminal⢠block or wiring âŁharness rather than âŁthe element â˘when evidenceâ shows⤠localized heating or arcing at connections; consultâ the⣠appliance wiring schematic and parts compatibility notesâ before replacing components to ensure correct fit and terminal⣠alignment.
| Item | Description |
|---|---|
| Common Test | Visual inspection,⤠continuity check with multimeter, voltage verification âat terminals, control switch functional test |
Compatibility, Parts Interchangeand⤠replacement/Installation Guidelines
The WB16K10026â GE Oven Range âStove Cooktop Double Burner is an OEM-style dual-ring surface element that provides two concentric heating zones controlled by the range’s infinite switch. â˘As a âŁfunctional component âit converts â¤line voltage⣠into âheat across inner and âŁouter⢠resistive spirals;⣠properâ interchange requires matching the physical âmounting, terminal configuration, âand the element’s rated voltage/wattage to the appliance. Technicians evaluate compatibility by comparing⣠element diameter, mounting clip positions, terminal spacing andâ typeand the ring â¤configurationâ (single vs. dual) to the existing part rather than⢠relying solely on model numbers.
For replacement and âinstallation, first⢠disconnect electrical power and verify⤠isolation at the breaker. Remove the cooktop or âlift the elementâ to access the⤠terminals, then confirm continuity of each ring and inspect insulators and âterminal connectors â¤for corrosion before swapping in the âWB16K10026. After seating âŁthe element in its mounting clips and reconnecting terminals, âŁtest each heatâ zone at â¤low and high⣠settings to confirm correct âcontrol interaction and that there are no hot spots or loose connections. Common practical â¤checks include:â
- Verify terminal âtype and spacing match the socket on the range.
- Confirm mounting clip⢠alignment andâ cooktop clearance to⢠prevent shorting.
- Match rated voltage/wattage to â˘the appliance service data to avoid overloading controls.
- Inspect for physical damage or âwarped elements that can cause uneven heating.
| Item | Description |
|---|---|
| Function | Dual-zone surface â¤heating element (inner and outer rings selectable by âŁcontrol) |
| Compatibility checks | Mounting geometry, terminal style/spacingand electrical rating must match the appliance |
Q&A
What is theâ WB16K10026 and â˘what type of cooktop is it⤠used⤠on?
The WB16K10026 is a â¤GE OEM âreplacement double (dual/expandable) surface heating element âassembly designed for electric ranges with smooth glass-ceramic cooktops. it is the radiant/halogen-style heating element that â˘provides bothâ an inner and⤠an âouter heating zone so theâ burner can heat different sized⤠cookware or run at âŁdifferent âpower levels.
How do I know⤠if⤠WB16K10026 is â¤the correct replacementâ for my range?
always verify compatibilityâ by matching âthe GE part number (WB16K10026) to theâ part listed for âŁyoruâ specific appliance modelâ and serial number. Also check theâ element’s physical characteristics â¤(diameter, mounting ring style, number and layout of terminals) and the connector type. If available, consult the range’s parts⤠diagram or the GE parts website to confirm a direct⢠match.
What are â˘common symptoms that this dual burner has failed?
typical failure symptoms include: one or both zonesâ of the element⢠not heating at all;⢠the burner heating âweakly or unevenly; the outer zone not switching on when selected; visible cracks or discoloration âŁin the element or glass; or the âcontrol â¤showing related error codes. Note that similar symptoms can also â¤be caused by a faulty infinite switch or damagedâ wiring, so troubleshoot the âelement and controls.
How âŁcan a technician âtest the WB16K10026 to⢠determine if âit’s faulty?
First disconnect power to the⢠range. âInspect visually for âŁcracksâ orâ breaks. Use a multimeter: check for continuity across⣠theâ element’s terminals-eachâ active section should show âlow resistance â¤(not open). âŁAlso⤠check forâ resistance from each terminal to the element chassis/ground; there should âbe no â¤continuity (infinite resistance). If an â˘inner or outer section is âopen (no continuity) or shows short-to-ground, âthe elementâ is bad. Compare readings⣠to âthe factory service manual if specific resistance values are provided.
Can Iâ replace⣠the WB16K10026 myselfand what are the basic steps?
Yes,⤠if you are pleasant working safely aroundâ electrical appliances. âŁBasic steps: 1) Disconnect power at âthe breaker; 2) allow the cooktop to cool and remove any glass topâ screws or clips per your model; 3) lift orâ remove the glass/ceramic â¤top as instructed; 4) âŁdisconnect⢠the⤠element’s spade connectors (note or photograph wiring); 5) remove âthe element mounting âhardware â˘and âswap in the new WB16K10026; 6) reconnect âterminals,⤠reseat the cooktopand restore power. Follow the service âmanual for your exact model and âtake anti-static and âŁhandling precautions for âthe glass top. If unsure, hire a qualified technician.
What wiring/terminal⣠configuration does this dual burner use?
Dual (expandable) elements typically have separate connections for â˘the inner⣠and outer heating sections plus a commonâ connection.⤠The âexact numberâ and â˘layout of âspadeâ terminals variesâ by âelement design, so match the replacement’s terminalâ layout toâ the â¤original. Always label or âphotograph the wiring â¤before disconnectingand consult the appliance wiring⢠diagramâ to ensure âproper reconnection.
Could a bad control or⤠switch be mistaken for a bad WB16K10026?
Yes. A faultyâ infinite/burner switch, relay on⤠the main control boardor damagedâ wiring can cause the same symptoms as â˘a failed⤠element (no heatâ or only one zone heating). To⢠isolate the problem: test â˘the element for continuity first; if the element tests good, then test the switch and â¤wiring⣠for proper operation and voltage when a burner is called for. âŁOnly â˘replace the necessary⣠component⣠after diagnostics.
Any maintenance or⣠care tips to extend âthe life â˘of âthe WB16K10026?
Keep the âglass-ceramic âcooktop clean and avoid dropping heavy objectsâ on it toâ prevent element âdamage. Don’t use cookware with warpedâ bottoms that âcan stress â¤the surface. clean spills promptly âwith products⢠designed for⤠glass cooktops and âavoid abrasive⢠pads that can scratch the âsurface.⣠if a â¤spill⢠boils over and contacts the element area, let everything cool before cleaning.⣠Proper use and cleaning help⤠prevent hotspots and premature element failure.
In Conclusion
The âWB16K10026 GE â¤Oven Range Stove Cooktop Double Burner serves as a âessential component inâ maintaining consistent cooking performance andâ safe operation of compatible âŁGE rangesâ and cooktops. As a primary heat-producingâ element, it⤠directly affects temperature uniformity, energy transferand âoverall user â¤experience during everyday cookingâ tasks. â˘Properly âŁfunctioningâ burnersâ help preserve the appliance’s efficiency and extend its usable life by⣠ensuring predictable heating behavior and reducing stress⤠on⤠other system⤠components.
timely and accurate âŁdiagnosis of burner issues-such as uneven⢠heating, failure to⢠heat, visibleâ damageor âelectrical faults-is essential to determine whether repair, cleaning,â or replacement is the âappropriate⢠course of action. Correct identification âof symptoms and verificationâ of compatibility with the WB16K10026⤠part numberâ prevent unneeded expense and reduce downtime. When replacement âŁis necessary,⢠using the specified component and following manufacturer-recommended procedures restores performance and maintains appliance safety and reliability.
Whether performed⢠by a qualified technician orâ aâ learned homeowner â˘following âŁthe service documentation,â replacement should beâ executed with attention to âelectrical⣠safety, proper wiring and âŁmountingand post-repair testing. Prioritizing accurate diagnosis and the use⢠of the correct â¤replacementâ part helps ensure âcontinued cooking performance, compliance with safetyâ expectationsand long-term value from the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
