316272000 frigidaire â¤Igniter â˘and â¤Orifice holder is âa combined ignition and gas metering component used on â˘Frigidaire gasâ appliances. It consists of a mechanical holder that secures the burner orifice in place and âan ignition elementâ thatâ provides the initial energy⣠toâ light âthe gas; together the⣠assembly positions the orificeâ relative toâ the burner ports and â¤locates⣠the igniterâ where it can reliably ignite theâ fuel-air mixture.⢠As a hardware assembly it is a serviceable part âdesigned for repeatable installation andâ alignment within the burner chamber.
Inside the appliance the igniter and orifice â¤holder interfaces â¤directly with â˘the gas â˘delivery âand ignition âsubsystems: the orifice controls the flow rate andâ initial jet â¤geometry from the manifold âŁor valve, âŁwhile the igniter provides â˘either aâ spark or a hot surface â˘to initiate combustion.â The assembly must align⢠with⤠the burner head,sealâ against the manifold or valve to âprevent leaks,and function in âconcert with control⣠modules,gas valves,flame⤠sensing⣠devices,and â˘the burnerâ ports âto achieveâ stable⣠combustion.Proper sizing, positioningand âelectrical connection are therefore critical to achieve correct flame âcharacteristics, safe operationand reliable ignition â¤cycles.
This article will explainâ theâ component’s function and â˘construction, cover compatibility and identification (how to confirm 316272000 is theâ correct âreplacement for a given model), â˘describe common failure symptoms, â¤and â¤provide a troubleshooting âchecklist for âignition⢠and⣠fuel-delivery â¤issues. It will alsoâ discuss practical replacement considerations such as verification of orifice size, alignmentâ and sealing practices,â basic electrical tests for the igniterandâ safety precautions⣠to observe when âworking on gas appliances.
Table of Contents
- Function andâ Role of âthe Igniter âand Orifice holder âin Frigidaire Gas Appliances
- How the⢠316272000 âŁFrigidaire⢠Igniter âand Orifice Holder Works Inside âŁthe Appliance
- Common Failureâ Symptoms andâ Diagnostic â¤Indicators for⢠the Igniter⢠and Orifice âHolder
- replacement â¤Considerations, Installation Procedures âand Model Compatibility for the 316272000⢠Frigidaire Igniter and Orifice Holder
- Q&A
- The â˘Way Forward
Function and Role of the Igniterâ and Orifice⢠Holder in Frigidaire Gas âŁAppliances
The â316272000 Frigidaire⢠Igniter and⣠Orifice âŁHolder is âan integrated assembly that secures⢠the gas âorifice âwhile positioning â˘the â˘ignition â¤elementâ so flame creation is repeatable and consistent. in⤠service, the part maintains âthe precise⤠spacing and orientation between the orifice⣠and the igniter (spark electrode or hot-surface element), which directly âŁaffects âignition timing, flame patternand combustion⢠stability. Proper âmechanical seating of the orifice within the âholder ensures⣠the designed flow characteristics; the igniter element âthen⢠provides the electricalâ spark or heat necessaryâ to ignite the âmetered gasâ as it â¤exits the orifice.
Technicians should treat this âcomponent as both âa mechanical âalignment âŁdevice and⣠an electrical ignition interface: âpoor mounting,â a cracked âceramic insulatoror a â˘shifted electrode⢠will produceâ symptoms that mimic⣠valve or supply problems. Practical âŁchecks include visual inspection for⢠secure âmounting and correct gap, verification of the igniter’s electrical â¤continuity or proper spark behavior,⤠and confirming âthe orifice size andâ thread â¤match the⢠appliance specification.Common practical âŁconsiderations for repair â¤or replacement âinclude matching the holder’s mounting âtabs and connector type to the appliance and ensuring⢠the â˘orifice size corresponds to the fuel âpressure⢠and burner design.
- Keyâ functions:⢠secure orifice alignment, stable ignition location,⢠and electrical connection for the igniter.
- Common âsymptoms âof failure: delayed ignition, continuousâ clicking, weak or yellow â˘flame, âor â˘uneven burner performance.
- Compatibility âŁchecks: confirm â¤orifice size, thread/mounting pattern,â and electrical connector before replacement.
| item | Description |
|---|---|
| Function | Holds the orifice and⤠positions âtheâ ignition element for consistent⤠combustion |
| Typical failure signs | Misfires, continuous sparkingorâ erratic flame behavior |
How the 316272000 Frigidaire⣠Igniter and Orifice Holder Worksâ Inside the Appliance
The âŁ316272000â Frigidaire Igniter and Orifice âHolder is a combined âmechanical and electrical subassembly that bothâ positions the âgas orifice â¤and provides âŁthe ignition â˘sourceâ for a burner. In typical installations⣠the orifice â¤holder secures the calibrated gas jet at the correct distance and orientation to the burner ports while theâ igniter element-eitherâ a spark electrode or a âhot surface/glow element dependingâ on model-provides the â¤energy⤠needed to initiate â¤combustion. Together âŁthe two âparts control initial flame establishment â˘and influence flame shape, âŁstabilityand safetyâ interlocks;â a misaligned orifice holder, a clogged⢠jetor a weakened igniter âŁwill change⢠combustion behavior even when the valve and âmanifold pressures are correct.
- Function: aligns and âŁsecures gas jet; places igniter⤠at the correctâ ignition gap âor proximity to âburner ports.
- Behavior: initiates ignition⢠when control supplies power; â˘orifice meters flow â¤to produce the designed flame size⤠and pattern.
- Compatibility: fitsâ specific âFrigidaire range/oven models-confirm manifold⤠threadsorifice size⢠(NG vs LP)and electrical âconnector before replacement.
| Item | Description |
|---|---|
| Igniter | Electrodeâ or glow âelement that produces the⤠spark or heat âto â˘ignite the â˘gas; interfaces with the control circuit. |
| Orifice Holder | mechanical holder for the calibrated orifice that metersâ gas flowâ and maintains alignment âŁwith burner ports. |
| Common âsymptoms | Delayed â¤ignition, â˘inconsistent â˘flame, yellow tippingorâ gas smell usually indicate a degraded igniter, clogged orifice,â or misalignment. |
During a normal ignition â¤sequence the range control⢠energizes âthe igniter⢠while together âŁopening the â˘gas valve; the igniter’s â¤location and the orifice’s âdiameter determine how ârapidly â¤a stableâ flame is established and whether âthe flame envelopsâ any flame sensor. Technicians âdiagnosing performance problems⣠should inspect the âorifice for carbon or debris, verify mechanical â¤seating and orientation of the⤠holderand confirm the â˘igniter receives the correct âcontrol voltage and â¤shows expected⢠continuity. Practicalâ examples⤠include a slow-glowing igniter that allows gas to flow too long before âŁignition (risking delayedâ light âor valve cycling) orâ an orifice⤠with the wrong â¤bore â¤size forâ LP conversion,⣠bothâ of which produce â˘reduced heat⤠output âand unstable flames ratherâ than â¤an electrical fault⢠in the controller itself.
Common Failure Symptoms and Diagnostic â¤Indicators â¤forâ the Igniter and â˘Orifice Holder
The 316272000⢠Frigidaire Igniter and Orifice Holder is a combinedâ ignition electrode and gas-orifice mounting assembly that âestablishes the physical gap and âalignment for reliable âŁignition while âholding the orifice in âthe correct⢠position⤠relative to the burner.In normal âoperation the electrode⤠must present anâ intact ceramicâ insulator and a clean conductive tip forâ the â¤ignition module âto produce a consistent spark, while the orifice âholder must remain free of â˘carbon deposits and securely seated âto maintain correct gas flow and flame geometry. âŁThis assembly is engineered to matchâ OEM mounting points and orifice sizing for compatible Frigidaire âŁranges,⤠but technicians should âverify model-specific fit and⣠orificeâ typeâ (natural gas vs LP) before replacement or âconversion⤠work.
Diagnosing⣠failures ârequires â¤both⢠visual â¤and⣠electrical checks: inspect the ceramic for cracks or ⢠carbon tracking, confirm âthe orifice bore is unobstructedand verifyâ the electrode tip is not eroded or âbent. Measure continuity of the igniter circuit âand observe whether âŁthe ignition module produces a visible⤠spark⤠at⣠the electrode during a call for heat;⢠lack of sparkâ with âcorrect control voltage typicallyâ points âto a âŁfaulty electrode/insulator or poor âground,while â˘presence of âspark but âno flame often indicates a clogged or mis-sized⤠orifice or supply⤠issue. For safe testing use âcorrect tools (insulated probes, appropriate high-voltage measurement equipment)â and compare observedâ symptoms to the list below toâ narrow â˘down whether the igniter, the orifice holderor an upstream control/supply problem isâ the root cause.
- Continuous clicking⤠with⢠no ignition – possible cracked insulator, âŁshorted electrodeor insufficient gas flow
- Delayed ignition or repeated â¤ignition⤠cycles – partial âŁobstruction â¤ofâ orifice⢠or degraded electrode tip
- Weak âor⢠lifting flame – âincorrect orifice sizing, misalignment â˘of holderor pressure â¤issues
- Visible⤠carbon tracking or⣠soot⤠onâ ceramic – electrical leakage and imminent electrodeâ failure
- Open circuitâ or â¤very high resistance on multimeter – broken internal â¤conductor in the igniter
| Item | Description |
|---|---|
| Basic diagnostic | Visual inspection for cracks/carbon, check continuity of igniter circuitand verify visible spark or â¤gas⢠flow during âdemand |
Replacement⤠Considerations, Installation Procedures âand Model âŁCompatibility⢠for the â¤316272000 Frigidaire Igniter and orifice Holder
The 316272000 Frigidaire â¤Igniter and âOrifice Holder is an integrated assembly that accurately positions the gas orifice relativeâ to the ignition⣠electrode âand secures â¤the orifice to âŁthe burner manifold. Its⢠mechanical function is to maintain precise â¤alignment andâ electrical⢠isolation so⣠the â¤ignition sparkâ consistently reaches â˘the âŁgas jet; failures typically present as continuous clicking,delayed ignition,a weak or absent⢠spark,or soot buildup on the â¤burner.In practical âservice, âinspect the ceramic insulator, mounting boss, â˘and orifice seating – a hairline crack âŁor bent electrode will disrupt the⢠ignition path and often mimics valve orâ module faults.
Replacement requires basic mechanical âandâ gas-safety âprecautions: âŁisolate gas and electrical supply, preserve orientation marks, transfer any gaskets⤠orâ spacersand â˘verifyâ the orifice⤠size and thread âfit before final assembly. After âinstallation, perform⢠an ignition âsequence check âand a low-pressure leakâ test at â˘the manifold; confirm that the electrode-to-orifice geometry matchesâ the manufacturer’s specification âandâ that the⣠ignition âŁlead has continuity. Forâ model compatibility, cross-referenceâ the part number against the appliance’s service⢠manual orâ OEMâ parts list, since visual âsimilarity does not guarantee correct orifice size, thread pitch, âor mounting tab location.
- Shut off gas and power ⤠before starting work.
- Remove⣠burner⤠cap andâ access manifold to âunfastenâ the old⢠assembly.
- Transfer or replace gaskets and mating hardware; orient⤠the⤠electrode â¤correctly.
- Reassemble, perform ignition âtestsand âconduct a leakâ check at the manifold connection.
| Item | Description |
|---|---|
| Function | Positions the gas â¤orifice and ignition electrode; provides⢠electrical insulation⣠and⤠secure mounting to⢠the manifold. |
| Common â˘failure âmodes | Cracked ceramic, â¤bent âor⣠fouled electrode, stripped⢠threads, âor clogged orifice causing intermittentâ ignition âor⣠poor flame. |
| Installation notes | Verify orifice size and orientation, retain or replace gaskets, âtorque screws toâ secure⢠alignment,⢠and perform âleak and ignitionâ testsâ after â˘assembly. |
Q&A
What is the 316272000⣠Frigidaire igniter âand âorifice holder?
The 316272000 is an âOEM replacement assembly for certain Frigidaire gas ranges and ovens that includes the hot surface igniter (the⣠glowing element⢠that lights the burner)â and âŁthe âorifice holder (the bracket â˘that⣠positions the gas â¤orifice/nozzle). It replacesâ the original parts âthat⣠control ignition and gasâ flow at the âoven burner.
How do I⤠know if the â˘316272000â is compatible âwith my range model?
Confirm compatibility by checking your appliance model number (usually âŁon aâ tag inside the oven⣠door or on⢠the frame) and cross-referencing it⤠with âfrigidaire parts lists or a trusted parts supplier. You canâ also search the â316272000 part number on the âFrigidaire âparts website or call customer support-never assume fitment âbased on â˘appearance âalone.
What symptoms indicate â˘the igniter â˘or orifice holder needs replacement?
Common signsâ include the oven not âlighting, delayed ignition (long glow before flame âor multiple ignition clicks), weak or âintermittent flame, âor visibleâ damage/corrosion to the orifice holder. if you âsmell gas âand theâ burner doesn’t â˘light,stop use immediately and inspect the igniter/orifice assembly as one possible cause (but treat all gas issues with caution).
How can a technician test whetherâ the igniter is bad?
Safe tests include âa visual âcheck (should glow luminousâ orange when calling â˘for âheat)and an⣠electrical test. With power and gas turned onâ and the oven set to ignite,verify the⣠igniter receives the correct control voltage (typically 110-120 âVAC on most residential ranges)â using â˘a multimeter. â˘If voltage is present and the igniter âdoes not glow, the âigniter is âbad. Continuity/ohm readings can show a broken element⣠butâ are less definitive-an igniter can have â¤continuity yet âŁbe too âweakâ to open âthe gas valve,â so observing âglow or measuring âcurrent draw (perâ manufacturer spec) isâ the best functional â˘check.
What â˘tools and safetyâ steps are required âŁto replace the 316272000?
Tools: screwdriver/nut driver âŁset, socket set, âmultimeter, adjustable wrench/pliersand a small brush â˘or cloth. Safety âsteps: turn off electrical power to the appliance, â˘shut off the âŁgas supply, work in a well-ventilated area, avoid open flames,⣠and⣠check for gasâ leaks after⣠reassembly (soap solution or âapproved â¤leak detector).⢠If⤠you’reâ not agreeable working with gas and mains voltage, hire a qualifiedâ technician.
What is the general procedure to â¤replace the âigniter and orifice holder?
Typical steps: 1) Disconnect power and gas. 2) Remove oven racks and access panel toâ reach the burner area. 3) Disconnect the igniterâ wiring harness âand remove mounting screws/fasteners holdingâ the igniter and orifice⢠holder.4) Removeâ the old⣠orifice/nozzle from âthe holder if⤠necessary and install the new⢠orifice âin the correct orientation. 5) Mount the new⣠assembly, reattach wiring, restoreâ gas and â˘powerand test â˘ignition. Tighten fittings and check for leaks. Followâ the â˘appliance⤠service⤠manual â˘for model-specific â¤details.
Does the orifice holder matterâ for âŁnatural â˘gas vs âLP (propane) conversion?
Yes. Orifices/nozzles are sized differently forâ natural gas and LP; â˘the correct âorifice size is critical for safe and âproper âcombustion. If you⤠are⤠converting âfuelâ types,use the correct orifice supplied⣠or specified for yourâ fuel and update any pressure â¤regulator âsettings per manufacturerâ instructions.Never operate an LPâ appliance with natural gas or vice versa without the correctâ orifice and conversion procedure.
Should I buy the OEM 316272000 or an⣠aftermarket⤠replacement?
OEM parts ensureâ fit,⤠compatibilityand original specifications⤠(including correct orifice size andâ mounting).â Many⤠aftermarketâ parts⤠are lower cost âand can work, âbut verify theyâ include the correct orifice and match âmounting/wiring exactly.â For safety-critical components â¤involvingâ gas and â˘ignition, using the OEM part or⢠a reputable aftermarketâ part that explicitly listsâ compatibility is recommended.
The Wayâ Forward
the 316272000 â˘Frigidaireâ igniter and orifice holder serve as criticalâ components⢠in gas appliance âignition systems, providing reliableâ spark generation and âprecise gas flow â˘control to ensure consistent burner âoperation.⢠By⢠combining durable materials â˘and engineered tolerances,this assembly helps maintain efficient⤠heating performance,safe ignition,and overall â˘appliance⤠reliability throughout normal use.
Proper âŁdiagnosis and timely replacement of âthe â316272000 unit âŁare critically âimportant to preserve safety, performanceand energy â˘efficiency. Accurate fault identification-preferably through systematic testing or by a qualified service technician-avoids needlessâ parts replacement andâ ensures â˘compatibility âŁwith the appliance.â Whenâ replacement is required,⢠usingâ the correct part andâ following⣠manufacturer âŁspecifications supports âlong-term functionality and⣠reduces the risk of recurring â˘issues.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
