W10721967â Whirlpool Washer Cam â¤Kit is a âreplacement cam â¤assembly used in certain âWhirlpool topâload washing machines; it is a mechanical cam/shifter component that interfaces between âthe drive system and the agitator or wash basket to produce the â¤required motion profiles â˘during wash cycles.
As a cam âassembly, â˘the â¤partâ converts rotational torque from the â¤motor and gearbox into discrete mechanical positions that âselect agitation, transfer, â˘and spin modes. It typically mounts on or near the transmissionâ output shaft andâ interacts directly wiht the gearcase, drive⣠coupling/clutch and the agitator âŁor basket drive.As the cam geometry and mating features determine timing⤠and engagement forces, wear, deformationor incorrect installation can⢠produce loss of agitation, failure⢠to âspin, excessive noiseor erratic cycle behaviour; the cam thus plays a direct role in safe, repeatable cycleâ sequencing and load âhandling.
In this article you will find a âtechnical overview of theâ W10721967 cam⤠kit’s function and where it is used, âŁguidanceâ on model compatibility and parts crossâreferences, âŁcommon failureâ symptoms and inspection checks a technician can perform, troubleshooting methods to isolate camârelated issues âfrom motor, transmission or control faults, â˘and practical replacement considerations including required precautions, alignment points and â¤basic service steps. The⤠intent⣠is â¤to provide the technical context needed âto evaluate, diagnose and replace the cam assembly without marketing claims or nontechnical âassertions.
Table of Contents
- Function and Role of the Cam Assembly in the⢠Washer’s Drive System
- How the W10721967 Whirlpool Washer Cam Kit Operates Within the Transmission and Agitator Linkage
- Common Failure Symptoms and Diagnostic âTests for Cam Kit âWear and Damage
- Compatibility, Parts Identification and Step-by-Step Replacement/Installation Guidelines for W10721967 Whirlpool Washer⢠Cam Kit
- Q&A
- Final Thoughts
Function âand Role of the Cam Assembly in â˘the Washer’s drive âSystem
The cam âassembly converts the transmission’s continuous rotational output intoâ the â¤intermittent axial or indexed motions required by the agitatorâ and basket. The W10721967 Whirlpool⢠Washer Cam Kit supplies the cam profiles and mating⣠hardware that interface the⤠drive hub to the clutch/agitator mechanism; it’s lobes and ramps dictate âŁwhen âand how torque is transferred, allowâ relative movement for wash versus spin,⢠and provideâ a builtâin âŁmechanical timing function. In practical terms, the cam rides âon a follower or clutch shoes and converts ârotation into controlled â˘linear or phase-shift movement âso that theâ agitator âoscillatesâ duringâ wash cycles and the basket locks for spin cycles while⣠protecting the gearbox from shock loads.
Mechanical behaviorâ and compatibilityâ depend on cam geometry, materialand how the kit mates to the specific transmission and agitator design. Common failure modes are plasticâ wear, âcracked lobesor worn bearing surfaces thatâ cause slipping, intermittent engagement, increased noiseor loss of agitation; technicians can verify function by rotating⣠the â¤transmission output and observing âaxial movement of the follower âor âby inspecting the cam profile for deformation. Verify fit by matching âthe washer âmodel number to the part crossâreference before replacing,â ensure â˘correct orientation and retention hardware during installationand confirm that any replacement camâ maintains⣠the original ramp angles to preserve timing â¤and torque characteristics.
- Symptoms of cam failure: slipping/no agitation, loud â˘clunking on cycle change, irregular spin engagement, visible wear or cracking.
- Inspection points: cam âprofile integrity, follower contact surfaces, retaining clipsand any plastic deformation under âload.
- Installation notes: align cam ramps to transmission output marks, use specified fastenersand test through a full cycle after⤠replacement.
| Item | Description |
|---|---|
| Function | Translate rotational output into axial/indexed motion for clutch/agitator âengagement. |
| location | Mounted on the transmission output or drive hub, between⤠gearcase and agitator/clutch assembly. |
| typical failure modes | Plastic wear,â cracked lobes, loss of profile geometry causing slipping or intermittent engagement. |
| Service tip | Confirm modelâ compatibility, inspect⣠mating surfacesand verify engagement through manual⣠rotation before full reassembly. |
How the W10721967 âWhirlpool Washer Cam âKit Operates Withinâ the Transmission and Agitator Linkage
The W10721967 Whirlpool Washer Cam kit â˘contains the cam elements that physically âinterface between⤠the transmission gearcase and â¤the agitator linkage, converting the motor/transmission rotary output into the axial and radial âmovements that select agitation, drain, âand âspin. The cam’s lobed profile and matched follower â¤surfaces ride against the agitatorâ drive components or shift levers so that at specific angular positions âthe drive engages⣠or frees the agitator clutch⣠or dogs; this âŁdiscrete indexing controls âengagement depth and timing rather than providing continuousâ torque. â¤On Whirlpoolâ topâload directâdrive â¤models that use camâactuatedâ shifting,worn or deformed cam surfaces⢠reduce lift and change engagement⣠angles,wich producesâ symptoms such as partial agitation,intermittent spin engagement,early disengagement,or⢠audible ratcheting during cycle âŁtransitions.
In practical service, the cam kit operates as a mechanical timing device whose geometry â˘and⤠surface⤠condition determine⣠reliable engagement. â˘Technicians should inspect cam lobes and⢠followers for rounding, pitting,â or scoring,⣠verify correct âŁorientation and retention hardwareand ensure mating bearings and âseals â˘are not degraded; improper clearance⤠or âdamaged retention clips can allow axial âplay that prevents positive dog engagement. Replacing the cam kit isâ often necessary when inspection shows altered profiles or excessive wear,and â˘postâreplacement checks should include⣠dryârun cycle verification of shift timing and listening for consistent â˘engagement to confirm the transmission âand⣠agitator linkage respond as designed.
- Key functions:⤠convert âŁrotation to discrete shift⣠positions; control engagement depth and âtiming.
- Common failure symptoms:â partial agitation, no spin, intermittent⤠engagement, grinding or ratcheting noises.
- Service checkpoints: inspect⣠cam lobes and followers, verify orientation/retainers, check bearings and clearance.
| item | Description |
|---|---|
| Cam profile | Lobed geometry that determines axial displacement and timing for agitator engagement. |
| Follower/pawl | part â¤that contacts the⢠cam; wear here changes âengagement angles and timing. |
| Compatibility | Designed⤠for Whirlpool topâload directâdrive transmissions that use camâactuated shifting; confirm âmodel fit before replacement. |
| Typical symptom | Washer agitatesâ but does â¤not advance to spinor produces excessive noise during transitions. |
Common Failure Symptoms and Diagnostic Tests for Cam âKit âWear and Damage
The W10721967 Whirlpool Washer Cam Kit⣠replaces âthe plasticâ cam that interfaces between the transmission output âŁand the agitator or basket in âmany⤠Whirlpool topâload machines. Functionally, âŁthe cam provides â¤indexed engagement â˘surfaces andâ a bearing interface âto convert theâ motor/transmission âŁtorque into controlled âagitation and âspin; when the â¤cam tolerances degrade âor individual teeth crack, the mechanical coupling slips or disengages rather than transmitting full torque. Techniciansâ should verify⤠fit⢠by crossâreferencing the âpart number to the âappliance â¤model â˘before âŁreplacing the assembly, âsince misâmatched cams can cause improper alignment, accelerated â¤wearand secondary damage⣠to the â¤transmission or agitatorâ spline.
Diagnosing cam wear⤠requires both static inspection and dynamic functional âchecks. start withâ a visual check for⢠shredded plastic, ârounded or missing teethand excessive radial play at theâ cam⤠bore; follow with a manual engagement test by removing the agitator âandâ rotating the transmission output to feel for â˘consistent indexedâ stops. If the motor runsâ but the tub does not agitate or achieveâ high speedor if loud âgrinding and intermittent engagement âŁoccurâ under load, those behaviors point toward cam failureâ rather than â¤electrical faults. Practical tests include running⢠an empty spin to isolate balance issues, observing engagement under noâload andâ loaded conditions, âand measuring axial/radial play; replace âthe cam if any teeth âare damaged or â¤if play exceeds â¤manufacturer service limits.
- Slipping/agitation loss: â˘motor runsâ but tub fails â˘to agitate-indicative of worn â¤or broken camâ teeth.
- Grinding/noise: audible plastic-on-plastic âor clicking under âŁload from fractured⤠cam lobes.
- Intermittent spin: engagement only at certain positions due to collapsed indexing surfaces.
- Visible debris: plastic shavings âin theâ transmission well signaling âŁcam disintegration.
| Item | Description |
|---|---|
| Static inspection | Remove â˘agitator and inspectâ cam teeth, bore, âand mating surfaces⣠for cracking, roundingor plastic debris. |
| Functional test | Rotate â¤transmissionâ output manually and⤠run selective spin/agitate cycles underâ noâload and lightâload⢠to reproduce symptoms. |
Compatibility, Partsâ Identification and Step-by-Step Replacement/Installation Guidelines for W10721967 âWhirlpool Washer Cam Kit
The W10721967 whirlpool âWasher Camâ Kit is a small plastic/nylon⣠cam assembly used⤠on many Whirlpool topâload transmissions âŁto translate theâ transmission output into agitator and spin modes. Technicians identify this kit âby the molded part number, the shape and count of splines, âand the bolt/clip retention pattern; worn cams typically exhibit âvisible â˘groove wear,â cracked âlobes,⣠or broken retaining⤠tabs that âproduce symptoms such as incomplete agitation, intermittent shifting between wash and spinor abnormal knocking noises during cycles. Compatibility is âŁdetermined byâ matching the cam profile and spline dimensions âto the machine’s transmission output shaft and⢠service âliterature ratherâ than⣠relying solely on model family; replacing⣠the cam with one that has different spline geometry or retention⣠features will⤠not restore correct timing and can accelerate transmission wear.
- Safety and prep: disconnect powerâ and water, remove the agitator and âfabric softenerâ dispenser⤠to expose theâ cam and âtransmission âoutput.
- Inspect âŁmating âsurfaces and â˘the transmission output shaft â˘splines;⢠clean debris and compare spline count/diameter to the replacement â˘cam before installation.
- Lubricate âonly the splines â¤with a â¤thin coat of white lithium grease; avoid greasing brake orâ clutch surfaces⤠inside the⣠transmission.
- Seat the cam âwith â¤the indexed orientation that⢠alignsâ the cam lobes to the agitator drive features, secure with the original retainer/bolt toâ the specified fitand verify free but guided rotation through the cycle by hand.
- Reassemble⤠the agitator,reconnect power,and run a diagnostic or⢠short cycle to confirm correct shift timing and absence of abnormal noises.
| Item | Description |
|---|---|
| Part marking | W10721967 molded âon cam body identifies OEM⣠kit and its intended spline/retention geometry |
| Common symptoms | Intermittent agitation, failure to shift to spin, knocking âsounds, visible cam lobe wear |
| Installation ânotes | match spline count/diameter, thin greaseâ on splines only, ensure correct orientation⤠and retainer⤠seating |
| Tools | Socket set, snapâring pliers (if applicable), light grease, nonâmarring pry tool |
During installationâ verify that the cam engages the â˘transmission output without âlateralâ playâ and that⤠the retaining hardware â˘secures the cam flush â˘to the shaft⤠face; measurable axial movement or sideways play indicates an incorrect â¤part or damagedâ shaft that will transfer abnormal loads to the transmission. After reassembly,â validate operation under load by running a rinse/spinâ and observing the transition⢠points; if⤠shifting is delayed âor the agitator stalls, recheck spline engagement, the condition of⤠the retaining clip/bolt torqueand the presence of any fragmented plastic from the old cam that may âhave lodged in the gearcase.
Q&A
What is the⣠W10721967 cam kit and⣠what does it do?
The W10721967 â¤is an OEM⣠replacement âcam kit used on certain⤠Whirlpool (and some related-brand) âŁtopâload washers.â The cam assembly guides and supports the inner tub during agitation and spin cycles, absorbing shocks âand controlling how the âŁtub moves. When worn or broken it can allow excessive â˘tubâ movement, bangingand improper âŁspin performance.
How do I know if the⢠W10721967 cam kit is the correct part for my washer?
Confirm compatibility byâ checking your washer’s model number (usually on a tag inside the cabinet behind theâ lidâ or on the âback of the machine) and crossâreferencing itâ with the part number in the manufacturer parts list or an â˘official Whirlpool parts distributor.â Do not rely on visual similarity â¤alone-use the model/parts lookup âŁto ensure fit and proper function.
What are common symptomsâ that indicate the cam kit â¤is failing?
Typical signs include loud banging or knocking during âagitation or âspin,â the tub shifting or sitting⢠offâcenter, excessive âŁvibration or rocking, unusual wear on the bottom of the outer tub or cam â¤areaand inâ severe cases the washer failing⤠to enterâ or maintain theâ spin cycle âproperly.Visual inspection⣠may â¤reveal cracked âor âmissing cam⣠teeth, distorted plasticor â¤aâ broken spring/retaining components.
Can I replace the W10721967 cam kit â¤myselfand what tools are required?
Yes-technically a âcompetent DIYer can replaceâ it, but it requires moderate applianceâ repair skills. Typical tools: socket set, nut drivers, pliers, screwdrivers, possiblyâ an agitator â˘puller (depending on model)and a work surface. Always disconnect power and water before starting. âIf you don’t have experience with disassembling washers or the problem appears more extensive (gearcase damage, seal failure), â¤consider a professional.
Do âI need â˘to replace the gearcase or other partsâ when⤠installing the cam kit?
Not always. The cam kit is âa replaceable component seperate from theâ gearcase/drive assembly.Though, if the gearcase or drive components are damaged â(metal shavings, leaking gearcase oil, stripped splines,⢠orâ abnormal noise from the gearcase), you should replace or service those parts as well.Inspect the gearcase, drive âshaft, tub sealsand suspension âduring⢠the repair and â˘replace any worn items⢠to prevent⤠repeat âŁfailures.
What are the⣠basicâ steps to install the W10721967 cam kit?
General highâlevel steps: disconnect power and water, remove the agitator and any âfabric softener/diffuser, â¤remove theâ washer top or cabinet panels to access the cam area, remove âretainingâ clips/boltsâ and the old cam assembly (watch for âŁsprings or retainers), install the new cam kit in the correct orientation and replace anyâ included springs âor seals, reassemble in reverse order, restore power âŁand waterandâ run a test cycle. follow⤠the â¤service manual or⣠manufacturer instructions for⣠modelâspecific details and⢠torque specifications.
How long does replacing theâ cam kitâ usually takeand do you have any tips⤠to avoid mistakes?
An experiencedâ technician âcan often complete the job in about 45-90 âŁminutes; âa DIYer may take 1-3 hours depending â¤on familiarity and whether any âŁcomplications arise.Tips: âŁtake pictures during disassembly to help reassembly,keep fasteners organized,replace any worn clamps or seals â¤you find,avoid âforcing parts⤠(inspect for hidden retaining clips),and doubleâcheck⢠that springs âand cams are oriented exactly as â¤the âŁnew part requires. Always test⣠with⢠an empty load first to confirm proper operation.
Will⤠replacing the âW10721967 âcam âkit âŁfix noisy spins⣠and excessive vibration?
If the cam kit is âthe cause-worn â˘camâ surfaces, broken springs,⢠or missing cam⤠pieces-replacing it will usually resolve⣠banging, offâcenter tub behaviorand many vibration/noise issues. However, excessive vibration can also be caused by unbalanced⣠loads, worn suspension/shock â¤absorbers, âdamaged bearingsorâ a damaged gearcase. Inspect âŁand address all related suspension and âdrive components if symptoms persist â˘after installing the new âcam kit.
Final Thoughts
The W10721967 Whirlpool Washer cam â¤Kit is a small âbut critical âcomponent that â¤helps control the mechanical engagement â¤and movement within a topâload washer. By facilitating the proper interaction âŁbetween the transmission/drive assembly⤠and the agitator or basket, the cam kit âcontributes directlyâ to consistent agitation and spin performance, smooth operation, â¤and overall⣠cycle reliability. When functioning correctly, it helps the washer complete â˘wash, rinseand spin cycles as âdesigned⣠and reduces â˘strain on adjacent mechanical parts.
As symptoms of cam⤠kit wear-such as unusual ânoises, irregular⤠agitation or â¤spinning, slippingor âvisible wear on mating parts-can signal developing mechanical failure, accurate diagnosis is vital. Identifying the cam âŁkit âas the source of a problem early helps avoid secondary damage to the transmission, drive couplings, âor tub assembly âand â˘can âreduce repair costs and downtime. Diagnosis should follow manufacturer⤠guidance and âincludeâ inspection of ârelated components to confirm the cam kit is the root cause.
When âreplacement⤠is necessary, usingâ the correct W10721967 part and ensuring âproper installation restore intended function â¤and help âmaintain the appliance’s longevity. Whether performed by â˘a qualified technician or a knowledgeable doâitâyourselfer, replacement should â¤follow safety precautions and service instructions. Appropriate diagnosis and timely, correct replacement⣠preserve performance, â¤prevent further damage, â˘and support reliable operation over the washer’s remaining service âlife.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
