297110400 Frigidaire Refrigerator āThermister isā£ a temperature-sensing thermistor āusedā in Frigidaire refrigeration appliances; it āis indeed a small, temperature-dependent resistor āthat ā¤provides the control electronics with a measure of air or evaporator temperature. The component isā typically a twoālead sensor,often in an encapsulatedā¢ bead or molded housing withā¤ a connector or pigtail,and āis ācharacterizedā by a resistanceā¢ thatā varies predictably with ā£temperature ā¢(most refrigerator thermistors areā¢ negative temperatureā¢ coefficient,or NTC,devices).
Inside the appliance the ā£thermistor serves as theā primary temperature feedback elementā forā the control board and associated ā£control algorithms. It is indeed used to regulate ācompressor on/off cycling, ācontrol evaporator and compartment fans, participate inā damper control andā¤ adaptive defrost terminationand contribute to safety/limitā functions. The thermistor interfaces electrically with the electronic controlā module and mechanically with locations such as the evaporator ā¤cover, air ductsor freshāfood compartment where accurate local temperature sensing is required; āincorrectā¤ readings from the sensor āwill affect ārefrigeration performance āand defrost behavior.
In ā£this article āyouā¢ will find aā£ technical overview of theā¤ part’s functionā and ātypical electrical characteristics, guidance on verifying compatibility with specific āFrigidaireā models, common ā¤failure symptoms and diagnostic approaches (including resistance āchecks and connector inspection)and practical ā¢replacement ā¢considerations such as connector type, mounting location,ā¢ and postāreplacement verification. āThe focus isā¤ on āenabling technicians,engineers,and appliance ownersā£ to understand how theā¢ sensor ā£integrates into the system,how to recognize sensorārelated ā¤faults,and āwhat toā checkā before āreplacing the part.
Table of contents
- Function and Role of the Refrigeratorā¢ Temperature Sensor (Thermister) in Controlā£ Logic
- how theā£ 297110400 Frigidaire āRefrigerator Thermister Works ā¢Inside the āAppliance
- Common Failure Symptoms and ā¢Diagnostic Indicators for the Thermister
- Replacement Considerations and Step-byāStep ā¤Installation for the 297110400ā¢ Thermister
- Q&A
- In Summary
Function and ā¢Role of the Refrigerator Temperature Sensor (Thermister) in Controlā¢ Logic
The 297110400ā Frigidaireā Refrigerator Thermister ā¤isā¢ theā£ temperature sensing ā¢element the controlā£ board uses toā determine compartment temperatures and sequenceā£ cooling and defrost events.ā As an analog temperature sensor, the ā¤thermister presentsā£ a temperature-dependent resistance that theā£ controllerā¢ reads through ā¢a voltage divider or ADCā input; most refrigeratorā£ thermistorsā are negative-temperature-coefficient ā£(NTC) devices, meaning resistanceā£ falls as ā£temperature rises. The board āinterpretsā the resistance against a calibration curve or lookup table to ādecide āwhen to start or stopā the compressor, control evaporator and circulation fansand terminate defrost cycles, so accurate and predictable electrical ābehavior from ātheā¢ thermister is essential for ā£stable temperature controlā and energy-efficient operation.
Replacement āand troubleshootingā¢ require matching the sensor’sā resistance-versus-temperature characteristic and connector wiring so āthe control logic receives the expected values. A āmismatched thermister or aā¢ sensor with intermittent readings canā¤ cause ā¢long run ātimes, āshort cyclingor āskipped defrostsā as ā¤the controller will misinterpretā¤ compartment temperature.ā Technicians commonly verify function by measuring resistance atā known temperatures (room air and an ice-water bath) and comparing to the expected curve; they āalsoā¤ inspect wiringā£ and the matingā£ connector for ā£corrosion or loose pins.ā£ For field replacements, confirm parts compatibility with the ā¢refrigerator’s control boardā£ and ā¢perform a simpleā£ resistance check after installation to ā¢validateā¤ correct āoperation underā£ the appliance’s control logic.
- Common symptoms ofā¤ a failing thermister: ā¢unstable temperatures, ā£frequent compressor cycling,ā£ no termination of defrost,ā or error codes onā theā control board.
- Basic test steps:ā measure resistance at ~25Ā°Cā£ andā ~0Ā°C (ice water) with ā¢a multimeter, compare to expected values, check connector and harness continuity.
- Compatibility note: replace only āwith sensors matching ā£the ā¤original resistance curve and connector pinout to avoid control logic āmiscalibration.
| Item | Description |
|---|---|
| Type | Typically an NTC thermistor (resistance decreasesā as temperature increases) |
| Function | Provides resistance-based temperature ā¤signal to the refrigerator control board for compressor, āfanand defrost decisions |
| Test method | Measure resistance atā£ known temperatures (room and ice water)ā and compareā toā expected curve |
How the 297110400 Frigidaire Refrigerator Thermister Works Inside ā¤the Appliance
The 297110400 Frigidaire Refrigerator Thermister is aā£ passive ātemperature-sensing element usedā¤ by the refrigerator’s control electronics to convertā local temperatureā intoā¢ a measurableā resistance change. Installedā£ at the evaporator or inside a ācabinet air path,ā£ the sensor is typically a NTC device āwhoseā¢ resistance decreases as ātemperature rises; the control board reads this changeā through a voltage ā£divider or āADC input and usesā£ the value to regulate ā£compressor cycling, defrost timing,ā and damper/valveā¢ commands. Because the thermistor itself āhas no moving parts or on-board logic, ā¤correctā£ operation depends ā¢on matchingā£ the electrical characteristics (resistance vs. temperature curve), connector pinoutand physical ā¢mounting orientationā¢ to the ā£OEM specification forā¢ the model in āquestion.
Forā practicalā¢ diagnosis and ā£replacement,ā¢ technicians treat the 297110400 ā¤as āa straightforward ā¤temperature resistor: confirm wiring integrity, measure resistance at aā known ambient ā¤temperature,ā¢ andā compare against theā£ service āchart or OEM datasheet. Common in-field indicators ofā a failing thermistor āincludeā¢ erratic temperatureā control, ā¢continuous or excessively long compressor ārun times, frequent short cyclingor incorrect ādefrost cycles; a wholly open or shorted sensor will typically cause fault codes or default safety behavior from the control board. Troubleshooting steps andā typical checks include:
- Isolate ā¤harness and measure resistance āat room temperature with the sensor removed; verifyā¤ continuity to theā boardā connector.
- Compare measured resistance to theā refrigerator’s service specification or a known good part; ā¤large ā¢deviations indicate drift or damage.
- Inspect āmountingā and air path-incorrect placement or insulation canā¤ produce wrongā¢ readings āevenā with ā¢aā functional sensor.
| Item | Description |
|---|---|
| Sensor type | Negative Temperatureā¤ Coefficient (NTC) thermistor used ā£asā£ a temperature-to-resistanceā£ element |
| Typical mounting | Evaporator housing or internal air return duct; ā¢small āprobe or bead with OEM pigtail connector |
Commonā£ Failure Symptoms and Diagnostic Indicators forā¢ the Thermister
Theā¢ refrigeration controlā relies on āa lowāvoltage temperature sensor to provide the control board with a āvariable resistanceā proportional to air orā evaporator temperature; the ā¢ 297110400 Frigidaire Refrigeratorā¤ Thermister is such a sensor āconfigured as āan NTC (negative temperature coefficient) device. In practiceā£ this thermistor ā¤is a passive component that sits in the ā£airflow ā¤or on the evaporator, āand the control module interprets changing resistance to decide compressor run ātime, evaporator fan staging,ā and ā¤defrost initiation. Technicians should treat ā¢it as ā¢a āmeasurement element rather āthen a āpower device: failuresā typically manifest as incorrect resistance behaviorā£ (open circuit, shortor nonāvarying resistance)ā¢ or intermittent readings caused by connector corrosion, physical damage to the probeor insulation breakdownandā compatibility should be verified against the refrigerator model āand service manual before replacement.
Common āfailure indicators areā readily observable and measurable: steady warm compartmentā£ temperatures, ācontinuous compressor operation, excessively ā¤short run ā¢cycles,ā£ or missed/extendedā defrost ācyclesā¤ can all trace back to a faulty thermistor. Usefulā diagnostic āchecksā¢ include aā visualā inspection of the probe and ā£wiring,ā verifying connector integrity āat the control boardand performingā a resistance versusā temperature test with a digital multimeter-resistanceā¢ should change smoothly ā¢as the sensor is warmed or cooled (for anā£ NTCā£ type, resistanceā falls as temperature rises). Typical practical steps are ā¤summarized below to isolate ā¤sensor faultsā versus ācontrolāboard orā harness āissues.
- Visualā¢ and āconnector check: āinspectā for corrosion, āpin damageor ā¤crushedā£ wiring.
- Resistance test:ā£ measure ohms at ambient, then āapply heat (breath orā warmā¤ air) and cold (ice) to confirm āaā£ monotonic change.
- Continuity and short ātest: infinite resistance (open) or nearāzero (short) indicates failure.
- Compare āreadings to theā£ model’s service specifications or ā¤swap with a known good sensor whenā£ feasible.
| Item | Description |
|---|---|
| sensorā¤ type | NTC thermistor; resistance decreases withā£ increasing temperature and interfaces directly to the refrigerator control board. |
| Diagnostic ā¢indicators | Open circuit,ā fixed/no variationā¢ with temperatureor erratic intermittent resistance readings; also look for connector faults ā¢before replacing theā¤ sensor. |
Replacement Considerations and Step-byāstep Installation for the ā¢297110400 Thermister
The 297110400 Frigidaire Refrigerator Thermister is an NTC-typeā temperature ā¤sensor used by the ārefrigeratorā control board to ā£monitor air or evaporator temperatures and to ā¢time compressor āand defrost events.ā£ The deviceā¤ changes resistance predictably as temperatureā changes;ā£ the control ā¢electronics read that resistance and convert it to āa temperature valueā¤ using āa specific āresistance-versus-temperature ā¤curve. For ā¢accurateā operation a ā¤replacement must match the original part’s ā¢electrical ācurve,ā¤ mounting orientationand connectorā¤ wiring so the ācontrol board interprets theā¢ sensor readingā¢ correctly.ā In practice, incorrect replacement parts or āa āsensor that has drifted canā£ cause symptoms āsuchā¢ as short-cycling, excessive run ātimes, improper ādefrost terminationor āinaccurate temperature readouts in the fresh- or freezer-compartments.
Before ā¢replacing the thermistor, ā¤perform a resistance ā¢check with the ā¤sensor āat a āknown temperatureā¢ and compare that āreading toā¤ theā¢ service manual curve; this ā¤confirms a faulty sensor versus a ā¤wiringā£ orā control fault. When installing, disconnect power,ā£ remove the accessā¤ trim that secures the sensor, note the exact ā¤location āand orientation ā£(sensors mounted in air paths or clipped to the evaporator require specific exposure),ā¤ unplug the harnessandā¤ transfer the sensor to the same mounting point so thermal contact is ā¢preserved. Afterā¢ installation, restore power and verify the ānew sensor’s resistance and the refrigerator’s ācontrol diagnostics or ā£temperature behavior;ā£ if the controlā board showsā£ unexpected values, re-check harness continuity and āthe replacement part’sā¢ resistance curve.
- Verify part compatibility: connector type and resistance-temperature curve match the original.
- Measureā sensor resistance at ambient temperatureā before removal ātoā confirm failure.
- Disconnect power, then remove trim/panels and carefully unplug the sensorā harness.
- Install replacementā inā same āorientation and secure thermal ā¤contact; avoid ā¢compressing or insulating ā£the sensor differently.
- Reassemble,ā power upand confirmā correct readings via multimeterā£ or board diagnostics.
| Item | Description |
|---|---|
| Type | NTC thermistor (negativeā temperature ā¢coefficient) usedā£ for ātemperature measurement |
| Typical resistance | Approx. 10 kĪ©ā at ā£25Ā°C for ā¤manyā¢ refrigerator sensors – verify āwith service literature forā exact curve |
| Connector | Two- or three-pin wireā harness;ā¢ ensure pinout matches controlā¤ board harness |
| Typical location | Air baffle, evaporator fan housingor clipped to the evaporator coil depending on model |
Q&A
What ā¢is the 297110400 Frigidaire refrigerator thermistor?
The 297110400 is an OEMā¤ temperature sensor (thermistor) usedā in someā£ frigidaire/Frigidare-brand refrigerators.ā It is indeed an NTC (negative ātemperature ā£coefficient) ātype sensor that reports compartment temperature to theā appliance ācontrol board so the board can regulate ā£the ā£compressor, fans āandā¤ defrost cycle.
How doā¢ I know if the thermistor is failing?
Common symptoms of a bad thermistor ā¤include incorrectā or fluctuating ātemperatures ā¤inā the ā¤refrigeratorā£ or freezer, the ā£compressorā£ running constantly or not runningā¤ atā£ all, frequent frosting or defrostā¢ failures, ā¢and temperature error codes onā£ the display if theā£ model supports diagnostics.ā¢ These symptoms can also be caused by otherā¤ components, so aā¤ sensor test is recommended before replacement.
How do āI test theā thermistor with a multimeter?
Disconnect power and unplugā the fridge. Accessā¤ and unplug ā¤the āthermistor from the harness, then measure its DCā¤ resistance with ā£an āohmmeter. āAs it is indeed an NTC thermistor, resistance āshould change as ā¤temperature changes (resistance decreases when warmed and increases when cooled). Aā simple āfunctional test ā¢is: measure at room temperature, then warm the āsensor (finger or warm air) and confirm resistance āfallsand ā¢place it against ice/wet cloth and ā¢confirm ā¢resistanceā rises.Exact resistance vs. temperature āspecs vary by model-many Frigidaire ā¢thermistors are roughly inā the ā10 kĪ© class at ~25Ā°C-but always āverifyā¤ exact values inā theā appliance service manual or OEM spec sheet for definitiveā£ numbers.
Do I ā¢need to configure or calibrate the refrigerator after replacing the thermistor?
Usually no special calibrationā is required. After installing a new thermistor, restoreā power. The control board will begin reading āthe new sensor instantly. If the refrigerator has a diagnostics or reset procedure (refer to āyour model’s manual), running it can confirm theā£ new sensor āisā¢ working. If you see ā¤temperature errors after replacement, double-check connections ā¤and sensor placement.
How ā£doā I ā¤replace āthe 297110400 thermistor safely?
Basic replacement steps: 1) Unplug the refrigerator.2) Locate the thermistor (frequently enough behind an āinterior trim panel in the fresh food orā¢ freezer section).3) Remove theā¢ panel or shelf toā£ access theā sensor. 4) āUnplug the sensor harness and unclip ā£orā pry outā¢ theā¤ sensorā from its mounting. 5) Install the new sensor in ā¤theā same orientationā and location, secure it, plug in the āharness and replace panels. 6) Restoreā power and ā¤verify proper operation. Avoid āpinching ā¤or sharply bending the sensor wireand handle connectorsā¤ gently. If you āare not agreeable working on appliances, have a qualified ā£technicianā do the replacement.
Howā can I confirm the 297110400 āis compatibleā¢ with my refrigerator model?
Confirm compatibility ā£by checking theā refrigerator model number (usually on āa sticker ā¢inside the cabinet)ā and cross-referencing it with āthe OEM parts list, the part seller’s compatibility tool,ā¢ or theā frigidaire/frigidaire service manual. Part numbers can be supersededā orā¤ shared across models, so alwaysā verifyā fit āby model number ratherā¤ than assuming based on appearance alone.
Could ā£something else cause the same temperature problems?
Yes. Identical symptoms can be caused ā£by a ā¢faultyā control board, stuck āor damaged damper, ā¤evaporator fan āfailure,ā clogged or āfrozen evaporator coils, defrost ā¢system faults,ā¤ or refrigerant issues. Use diagnostics:ā£ testā¤ theā thermistor first (resistance change with temperature), then checkā¤ fans, defrost heater ā¤and continuity of the control board circuits.ā If uncertain, āconsult a technician to ā¢isolate the rootā£ cause.
Whereā¢ should I buy a replacement and any tips toā¢ avoid bad parts?
Purchase from ā£reputable sources: authorized Frigidaire parts distributors, Appliance parts retailersor the manufacturer. Verify the āexact part numberā¢ and theā seller’s return policy. Avoid inexpensive generic sensors of unknown āorigin; OEM or OEM-equivalent parts and sellers with good āreturn support reduce the risk of receiving āan incompatible or faulty āpart.Keep theā original part number andā¢ refrigerator model on hand when ordering.
In Summary
The 297110400 Frigidaire refrigerator ā¢thermistor is a ā£small ā£but essential ā¢temperature ā¢sensorā¢ that communicates ambient and compartment temperaturesā to the control board. āby converting temperature intoā¤ a resistance signal, the thermistor ā£helps regulate compressor ā£cycles, defrost timing and fan operation-functions that directly affectā cooling consistency, energy efficiency and food preservation.
When the āthermistorā isā¤ degraded, mislocated or electrically compromised, the refrigerator can ā£experiance temperature āfluctuations, excessive run time, frequent defrost ā£cyclesā or premature component āwear. Because ā¤these symptoms can āmimic otherā faults, ā¤accurate identification of the 297110400 thermistor as the root cause is significant to avoid unnecessary parts āreplacement and to restore reliable performance.
Proper ādiagnosis-reviewing ā£error codes, visually inspecting the sensor and wiringandā£ verifying resistance with respect to temperature-should āprecede replacement. If testing indicates a fault, replacingā¤ the ā¢sensorā¤ with the correct 297110400 part and confirming correct installation and operation willā helpā¤ reestablish control accuracy and appliance efficiency. When in doubt,seek ā£qualified service to ensure safe,correct diagnosis and replacement,preserving both performance and āserviceā¢ life āof the refrigerator.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
