316272000 Frigidaire Igniter and Orifice Holder is an OEM replacement assembly used on gas ranges and ovens; it combines the ignition electrode/mounting hardware with the gas orifice retention and alignment feature that positions the orifice relative to the burner. As a discrete mechanical and electrical component, the assembly typically consists of a metal orifice holder that secures the metering orifice to the burner throat, a ceramic or insulated electrode that provides the spark source, and a mounting interface that locates the assembly on the burner box or manifold.
Inside the appliance, the igniter and orifice holder performs two closely related functions: it establishes the correct gas path and orifice location for consistent gas flow to the burner, and it provides the spark electrode that initiates combustion when the control calls for heat. The part interfaces directly with the oven or cooktop gas manifold and the valve outlet, and it effectively works in concert with the ignition module or control board, burner cap, and flame sensing circuitry. Proper positioning and insulation of the electrode, correct orifice sizing and seating, and a secure mechanical mount are all critical to reliable ignition, safe combustion, and accurate burner performance.
In this article you will learn how the 316272000 Frigidaire Igniter and Orifice Holder functions, how to confirm compatibility with specific Frigidaire models, common failure symptoms (such as, no spark, intermittent ignition, delayed ignition, or gas odor), and systematic troubleshooting steps to isolate electrical, mechanical, and gas-flow issues. The guide will also cover practical replacement considerations - correct orientation, torquing and sealing of the orifice holder, verifying electrode gap and insulation condition, and post-repair leak and ignition testing - while emphasizing safety practices and reference to manufacturer service documentation.
Table of Contents
- Function and Role of the igniter and Orifice Holder in Frigidaire Gas Burner Systems
- How the 316272000 Frigidaire Igniter and Orifice Holder Operates Within the Burner Assembly and gas Delivery Path
- Common Failure Symptoms and Diagnostic Indicators for Igniter and Orifice Holder malfunctions
- Replacement Considerations, Model Compatibility and Step‑by‑Step Installation for the 316272000 Unit
- Q&A
- The Way Forward
function and Role of the Igniter and orifice Holder in Frigidaire Gas Burner Systems
The 316272000 Frigidaire Igniter and Orifice Holder is a combined electrode-and-jet assembly that locates and secures the burner orifice while supporting the ignition electrode and it’s insulating ceramic. In operation the ignition module applies a high-voltage pulse to the spark electrode mounted in the orifice holder so the spark forms at a controlled gap promptly adjacent to the gas jet; the holder establishes the geometric relationship between gas flow and spark location that yields reliable ignition. The assembly also provides mechanical mounting, a gas seal for the orifice, and thermal/chemical resistance where the burner flame is present, so material choice and fit are critical for proper behavior and longevity.
- Primary functions: position orifice, hold spark electrode, provide seal and mounting
- Common failure modes: cracked ceramic insulation, carbon tracking, clogged orifice, loose mounting
- Service checks: visual inspection for cracks/tracking, confirm electrode gap and alignment, verify orifice cleanliness
| Item | Description |
|---|---|
| Function | Aligns the gas jet and spark electrode to enable consistent ignition |
| Materials | Heat-resistant insulator (ceramic), corrosion-resistant metal holder |
| Compatibility | OEM replacement must match part geometry and orifice size for specific Frigidaire models |
Technicians should match the part number and inspect the assembly for mechanical wear or contamination when diagnosing ignition problems; a weak or intermittent spark is often caused by electrode misalignment, an eroded tip, or conductive carbon deposits rather than an electronic module fault. when replacing the 316272000 Frigidaire Igniter and orifice Holder, ensure the orifice thread, sealing surface, and electrode mounting orientation match the original because small differences in jet position or gap can change flame shape, burn quality, and emissions; after replacement, a brief burner test under normal operating conditions confirms correct ignition and stable flame.
How the 316272000 Frigidaire Igniter and Orifice Holder Operates Within the Burner Assembly and Gas Delivery Path
The 316272000 Frigidaire igniter and Orifice Holder functions as a combined mechanical and electrical subassembly that locates the igniter electrode precisely in relation to the burner orifice and secures the metering jet to the burner manifold. The igniter element (ceramic-insulated electrode or glow element depending on model) produces the spark or heat necessary to ignite the gas, while the orifice holder positions and seals the gas jet so that the correct fuel flow reaches the burner head. Correct alignment and insulation are critical: electrode tip position, the spark-to-orifice gap, and a stable mechanical mount determine ignition reliability and prevent flashback or repeated valve cycling.
Compatibility and practical service considerations focus on gas type, orifice size, and mounting geometry. Installing an assembly with an incorrect orifice or misaligned electrode changes flame shape and ignition timing-examples include delayed ignition with a partially obstructed jet or a sooty, yellow flame when the orifice is oversized or air mixture is incorrect. Technicians should verify electrical continuity and insulation integrity, inspect the orifice for corrosion or blockage, and confirm secure sealing to the manifold during replacement; when the ceramic insulator is cracked or the orifice shows wear, replacing the unit as a matched assembly restores factory alignment and minimizes trial-and-error adjustments.
- Absent or intermittent spark/ignition
- Delayed flame establishment or repeated clicking
- Yellow, lifting, or sooty flame indicating air/fuel imbalance
- Visible ceramic cracks or corroded/blocked orifice
- Mismatched orifice size relative to appliance gas type
| Item | description |
|---|---|
| Primary function | Positions igniter and secures/meters the gas jet for reliable ignition |
| Service check | Inspect electrode gap, continuity, orifice condition, and manifold seal |
Common failure Symptoms and Diagnostic Indicators for Igniter and Orifice Holder Malfunctions
The 316272000 Frigidaire Igniter and Orifice Holder integrates the hot-surface igniter with the orifice mounting assembly used on manny Frigidaire gas ranges. The igniter’s role is to heat to a visible glow, which draws enough current through the gas safety valve to allow the valve to open; the orifice holder positions and seals the gas orifice to deliver a consistent jet for combustion.Technically, failures present as changes in igniter behavior (no glow, weak or intermittent glow, or physical cracking of the ceramic) or orifice problems (blockage, improper seating, or mismatched orifice size for natural gas vs LPG). Compatibility checks should include verifying the electrical connector style,mounting flange,and correct orifice size for the appliance - substitution of a unit with the wrong orifice can cause weak flames or unsafe combustion characteristics.
Technicians can distinguish igniter faults from orifice-holder issues through visual inspection and simple electrical checks: a visibly cracked or heavily spalled igniter element or soot accumulation around the orifice typically points to replacement of the igniter and cleaning or replacement of the orifice holder. Use a multimeter to confirm continuity – an open circuit on the igniter indicates element failure; intermittent continuity suggests a cracked element that heats inconsistently. For orifice-holder diagnostics, remove and inspect the orifice for debris, confirm the orifice seat and threads are undamaged, and verify that flame shape and lift are consistent across burners after reassembly. When troubleshooting, isolate the problem by observing the igniter glow behavior under normal supply conditions and by testing flame response immediately after the valve opens to determine whether the fault is electrical, mechanical, or fuel delivery related.
- No glow / no ignition - igniter open circuit or failed element.
- Weak or delayed glow – aging igniter or poor electrical connection.
- Sooty, yellow, or lifting flame – blocked or incorrect orifice or improper seating.
- Intermittent flame cutout – loose mount, damaged wiring, or partial orifice blockage.
| Item | Description |
|---|---|
| No ignition | Igniter shows no visible glow and multimeter indicates open circuit; replace igniter assembly. |
| Weak glow / slow ignition | Poor contact, aging element, or incorrect supply; check connectors and measure continuity before replacing. |
| Poor flame shape | Orifice holder misaligned or clogged; remove, clean, and confirm correct orifice size for the fuel type. |
Replacement Considerations, Model Compatibility and step‑by‑Step Installation for the 316272000 unit
The 316272000 Frigidaire Igniter and Orifice Holder combines the ignition electrode and the gas orifice mounting into a single assembly that locates the orifice relative to the burner venturi and positions the igniter tip for reliable spark delivery. In normal operation the ceramic-mounted electrode must maintain a stable air gap and correct axial alignment to the orifice so the spark bridges consistently into the gas stream; common failure modes include ceramic cracks, electrode erosion, loose mounting that shifts gap or orientation, and blockage or deformation of the orifice seat that alters flow or flame shape. Compatibility is resolute by mechanical mounting pattern, electrical connector type (usually two-pin harness), and orifice orientation relative to the burner-verify that the 316272000 Frigidaire Igniter and Orifice Holder matches the OEM part number and the appliance’s parts diagram rather than relying on visual similarity alone.
When replacing the assembly,prepare by shutting off gas and electricity and documenting the relative position of the burner components so the orifice and igniter tip are reinstalled to the original orientation; loosening the mounting screws and extracting the old unit will often reveal the cause of failure (debris,carbon deposits,or misalignment). After installation confirm the igniter spark location and gap, torque mounting hardware to avoid deformation of the holder, and perform a leak and function check at low flame before full operation; technicians commonly verify spark continuity with a multimeter and confirm flame stability across the burner span during a timed safety test.
- Pre-install checks: part number match, harness connector type, and mounting hole spacing.
- Removal notes: document orientation, disconnect harness, avoid bending electrode.
- Post-install tests: spark gap/continuity, flame shape/stability, and gas-leak test.
| Item | Description |
|---|---|
| Function | Positions orifice and provides ignition electrode for controlled spark to the gas stream |
| Compatibility checks | OEM part number match, mounting pattern, connector type, and orifice orientation |
Q&A
What exactly is the 316272000 Frigidaire Igniter and Orifice Holder?
The 316272000 is a replacement assembly used on certain Frigidaire gas ranges/ovens that combines the ignition electrode (igniter) and the orifice holder/jet mounting. The igniter is the electrode that creates the spark to ignite gas, and the orifice holder positions the gas orifice (jet) that meters the gas flow to the burner.
What symptoms indicate this part might be failing?
Common signs include a burner that won’t light, intermittent ignition, weak or irregular flames at one burner, visible cracks or corrosion on the electrode, or continuous sparking without ignition. If only one burner is affected while others work normally, the igniter/orifice holder for that burner is a likely suspect.
How can I tell if the problem is the igniter/orifice holder or another component (valve, wiring, control)?
Start with a visual inspection: look for cracked/sooted electrode tips, corrosion, or a clogged orifice.If you hear the gas valve click and smell gas but there’s no ignition, the electrode/igniter may be at fault.If there’s no gas flow at all, the gas valve or supply is more likely. As multiple components interact, if basic visual checks are inconclusive it’s best to have a technician perform live diagnostics to avoid unsafe tests.
Can I clean the igniter and orifice holder, or do I need to replace them?
Light deposits and soot can sometiems be removed gently (soft brush, compressed air) from the orifice holder; do not enlarge the orifice or scrape the electrode tip. If the electrode is cracked, severely corroded, or the orifice is clogged internally, replacement is usually the safer and more reliable option. Always follow safety precautions – turn off gas and power – and consider professional service for gas appliance work.
Is the 316272000 part compatible with all Frigidaire models, and how do I confirm fitment?
Fitment varies by model and year. Confirm compatibility by checking your appliance’s model number (usually on a label inside the oven door or behind the drawer) and cross-referencing with the OEM parts list or the part seller’s compatibility chart. When in doubt, use the official Frigidaire parts diagram or contact Frigidaire customer support or an authorized parts distributor.
Can I safely replace this part myself?
Replacing the part is mechanically straightforward for a skilled DIYer, but it involves shutting off the gas and electrical power to the appliance and ensuring correct reassembly and leak-free connections. Because of the fire and gas-safety risk, manufacturers and many technicians recommend a qualified service technician perform the work unless you are experienced with gas appliance repair.
How should a clogged orifice be cleaned, and are there any precautions?
Use compressed air to blow out loose debris; avoid inserting needles or drill bits that can enlarge or damage the orifice and alter flow characteristics. if the orifice remains restricted, replacement is preferred. Never test or light a burner with a partially disassembled orifice holder, and always check for gas leaks after reassembly.
should I buy an OEM 316272000 or an aftermarket replacement?
OEM parts (Frigidaire/Whirlpool-branded) are built to the original specifications and are recommended for correct fit, performance, and safety. Some aftermarket parts might potentially be cheaper but can vary in quality and orifice sizing. If you choose aftermarket, buy from a reputable supplier and verify stated compatibility and warranty.
The Way Forward
The 316272000 Frigidaire igniter and orifice holder perform a central role in gas cooking appliances by providing the ignition source and correctly positioning the orifice that regulates gas flow to the burner. Together these components contribute to reliable ignition,stable and properly sized flames,efficient combustion and consistent cooking performance,all of which support safe and predictable appliance operation.
Accurate diagnosis is essential to determine whether performance issues stem from the igniter and orifice holder or from related systems (electrical controls,gas supply,sensors). Proper diagnosis avoids unnecessary parts replacement, ensures the correct part and specification are selected, and helps identify whether repair or replacement is the appropriate course of action. Because these components directly affect ignition and safety, evaluation and corrective work should follow manufacturer guidance and, when appropriate, involve qualified service personnel.
When inspection or testing indicates the 316272000 is worn, damaged or incompatible, timely replacement restores reliable ignition, helps maintain energy efficiency and reduces the risk of ignition failure or uneven heating. Selecting the correct replacement part and ensuring proper installation support continued appliance performance and safety. Routine maintenance and professional assessment when issues arise are the best ways to preserve functionality and extend the service life of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok