WB17X5113 GE Oven Oven Cooktop Burner Receptacle kit is a replacement receptacle assembly intended to provide the electrical and mechanical connection between removable heating elements and the appliance wiring harness on GE ranges and ovens.The kit typically comprises insulated terminal housings, crimp or spade terminals, and mounting hardware designed for high-temperature exposure and repeated connection cycles.
Inside the appliance the receptacle kit serves as the interface between the heating element terminals and the range’s power distribution and control circuitry. It interacts directly with the element terminals, the internal wiring harness or terminal block, and indirectly with control switches, thermal cutouts and grounding paths; its materials and construction must therefore resist elevated temperatures, vibration and electrical arcing while maintaining secure contact and appropriate insulation to prevent faults or nuisance trips.
In this article you will find a technical review of the WB17X5113 receptacle kit’s function and construction, guidance on model and compatibility considerations, common failure modes and diagnostic symptoms to watch for, practical troubleshooting steps (visual inspection, continuity and voltage checks), and key replacement considerations including safety precautions, correct installation orientation and connector integrity to ensure reliable operation after service.
Table of Contents
- Function and Role of the Cooktop Burner Receptacle in Oven Operation
- How the WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit Works Inside the Appliance
- Common Failure Symptoms of the Cooktop Burner receptacle: Ignition Failure, Intermittent Heating, and Arcing
- Compatibility and Applicable GE Oven Models, Cross‑Reference Numbers, and Mounting Variants
- Replacement Considerations and Step‑by‑Step Installation Procedures for the receptacle Kit
- troubleshooting and Diagnostic Procedures: Continuity, Voltage Tests, and Wiring/Connector Inspection
- Q&A
- Wrapping Up
Function and Role of the Cooktop Burner Receptacle in Oven Operation
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is the OEM connector assembly that provides the electrical and mechanical interface between a cooktop surface burner element and the appliance wiring harness. Functionally it serves as a high-current junction: insulated terminals and a heat-resistant body transmit the element feed while maintaining separation from chassis and adjacent low-voltage components. the receptacle’s material choices (thermoset insulator, plated terminals) and terminal geometry determine its thermal performance and contact resistance under sustained load, which directly affects element output and repeatability of temperature control.
In practice the receptacle both secures the element lead and preserves safe,low-resistance electrical contact; degraded contacts raise resistance,generate heat,and can produce arcing or intermittent burner operation. Common service actions include visual inspection for discoloration or melting, verifying terminal tightness, and replacing the part with a matched kit to preserve current rating and mounting alignment. For technician safety,disconnect power before testing or removal and document wire positions so replacement maintains correct phase and ground continuity. Using the correct receptacle maintains predictable element heating, reliable control interactions, and reduces risk of nuisance trips or damage to control electronics.
- Key features: high-temperature insulator, matched terminal spacing, mounting holes for OEM alignment.
- Failure symptoms: burned or blackened terminals, intermittent heating, visible melting, or arcing noise.
- Service guidance: verify model fit, confirm terminal count and spacing, replace like-for-like to preserve ratings.
| Item | Description |
|---|---|
| terminal count | typically 2-3 conductive contacts; must match element lead configuration and harness. |
| Materials | Thermoset/ceramic insulator with tin- or nickel-plated copper terminals for conductivity and heat resistance. |
| Typical failure signs | Discoloration, increased contact resistance, intermittent element operation, or visible deformation. |
How the WB17X5113 GE oven Oven Cooktop Burner Receptacle Kit Works Inside the Appliance
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is a passive connector assembly that joins the appliance wiring harness to a cooktop heating element or surface burner. Inside the appliance it provides heat-resistant insulation, reinforced retention around spade terminals, and a stable conductive path so line voltage is delivered with minimal contact resistance. The part does not regulate current; its role is purely mechanical and conductive – maintain correct contact pressure and insulation so the element or igniter sees the intended mains voltage without arcing or excessive temperature rise.
In operation the receptacle must withstand cyclical thermal stress and mechanical vibration while preserving low-resistance connections.Technicians commonly verify proper function by inspecting for discoloration or melted housing, measuring continuity across the element and receptacle with a multimeter, and measuring expected voltage at the terminals with the circuit energized (observe safety procedures). Typical compatibility requires matching the replacement receptacle to the element terminal spacing and terminal type; an incorrect fit can cause loose contact, localized heating, or intermittent operation. Practical examples: a cooktop element that flashes or heats intermittently often traces to increased contact resistance at this receptacle, while a visibly arced connector should be replaced rather than repaired.
- Features: heat-resistant housing, insulated spade terminals, mechanical retention clips
- Common symptoms of failure: intermittent heating, arcing at terminal, visible melting or carbon tracking
- Service actions: inspect, measure continuity/voltage, replace with identical spec part
| Item | Description |
|---|---|
| Terminal type | Male spade pads (designed to accept corresponding female element terminals) |
| Function | Provide low-resistance, insulated connection between mains wiring and element/igniter |
| Typical operating environment | Elevated ambient temperatures near cooktop, electrical cycling, occasional vibration |
| Common failure signature | High contact resistance, discoloration, arcing, intermittent power to element |
Common Failure Symptoms of the Cooktop Burner Receptacle: Ignition Failure, Intermittent Heating, and Arcing
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit serves as the electrical interface between a range’s spark ignition system and each surface burner igniter. It provides mechanical retention and an insulated electrical path for the igniter lead, so the high-voltage pulse from the spark module is delivered reliably to the electrode.Typical component failures are cracked or deformed insulation, corroded or broken terminal contacts, and heat-induced deformation that raises contact resistance; these issues disrupt ignition, create intermittent operation, or permit unintended arcing between the terminal and nearby metal surfaces. Match replacement receptacles to the original terminal spacing, wire gauge, and insulating material to ensure compatibility and safe operation.
- No ignition: spark module pulses but no visible spark at the burner-often caused by an open circuit or broken terminal at the receptacle.
- Intermittent heating: burner lights inconsistently or cycles off-commonly due to loose or high-resistance contacts that fail under vibration or heat.
- arcing or visible sparks at the connector: cracked insulator or carbon tracking allows leakage paths and localized heating.
- Discolored or melted connector: poor contact or adjacent heat sources causing thermal damage and increased resistance.
Diagnosing these symptoms combines visual inspection and electrical checks: confirm low-ohm continuity from the igniter lead to the receptacle terminal, observe for spark module voltage pulses during an ignition attempt, and inspect for physical damage or carbon deposits that indicate arcing. If continuity is unstable or the receptacle shows thermal damage, replacing the damaged part with the correct receptacle kit restores proper insulation and contact geometry; technicians should also examine the igniter tip and wiring harness for contributing faults and secure connections with correct crimps and routing to prevent recurrence.
| Item | description |
|---|---|
| Function | provides insulated electrical and mechanical connection between spark module/igniter lead and burner electrode. |
| Typical failure modes | Open/high-resistance contacts, cracked insulator, thermal deformation, carbon tracking and arcing. |
| Diagnostic checks | Visual inspection, continuity (low-ohm) test, observe ignition-cycle voltage and look for burn marks/arcing. |
| Replacement note | Use a receptacle matching terminal spacing and insulation properties; replace if physical damage or unstable continuity is found. |
Compatibility and applicable GE Oven Models, Cross‑Reference Numbers, and Mounting Variants
WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit functions as the electrical and mechanical interface between the burner terminal and the appliance wiring harness. The kit provides an insulated housing and conductive terminals designed to maintain low-resistance contact at elevated temperatures; proper selection of the receptacle geometry, terminal material, and insulation limits heat transfer to the wiring and prevents arcing. Typical failures include thermal degradation of the insulating boot, corrosion or deformation of terminals, and loose crimps, which show up as intermittent burner operation, increased connector temperature, or visible sparking. Replacing a degraded receptacle with the correct WB17X5113 variant restores continuity and consistent thermal and electrical behavior when installed with the matching harness and mounting hardware.
Compatibility is verified by matching the OEM part number and the physical characteristics of the connector rather than by appliance model name alone. Cross-reference numbers used by OEMs, distributors, and aftermarket vendors may list equivalents to WB17X5113, but technicians should confirm terminal count and spacing, tab orientation, mounting style, boot length, and the wire gauge rating before installation.Mounting variants include screw-tab, snap-fit, and panel-mounted styles and also straight and right-angle terminal orientations; selecting the wrong variant can leave terminals exposed or place the harness in an area of excessive heat. For field replacement, remove or photograph the existing receptacle, note the terminal arrangement and mounting method, and compare those details to the part drawing or service parts list before ordering.
- Key compatibility checks: terminal count/spacing, tab orientation, mounting style, insulation length, and wire gauge/temperature rating.
| Item | Description |
|---|---|
| WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit | Replacement receptacle housing and terminals; verify fit by matching terminal geometry, mounting tabs, and OEM part references. |
| Compatibility check | Confirm appliance parts list,photograph or measure existing connector,and compare to supplier cross-reference and technical drawing. |
Replacement Considerations and step‑by‑Step Installation Procedures for the Receptacle Kit
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit replaces the electrical interface between a cooktop burner element and the oven wiring harness, restoring mechanical retention and electrical continuity at the element terminals. The receptacle assembly serves to insulate exposed conductors, maintain low-resistance contact under vibration and thermal cycling, and match the OEM terminal spacing and mounting clip geometry; technicians should confirm terminal count and orientation against the existing element before installation. Functionally, the kit is intended to mitigate intermittent heating, arcing, or visible connector degradation by providing a secure female terminal connection that resists heat and mechanical deformation common around cooktop elements.
When replacing the receptacle, follow safe electrical work practices and verify that the replacement matches the original in terminal count, contact type, and insulation style. Typical installation considerations include routing wires clear of high‑temperature surfaces,confirming the wire gauge and insulation are suitable for the circuit,and performing a low-resistance continuity check after assembly; a properly installed receptacle will show stable contact resistance and no visible arcing during the first heat cycle. For field troubleshooting, inspect for loose crimps, melted insulation, or corrosion at the connection – these symptoms often explain uneven burner output and can be resolved by replacing the receptacle and re‑seating the terminals.
- Disconnect power and lock out the cooker before beginning.
- Remove access panels and label wires to preserve terminal orientation.
- Remove the old receptacle, compare terminal count and spacing to the new kit, and transfer or re‑terminate wires as required.
- Crimp or secure terminals to the correct wire gauge,mount the receptacle,then verify continuity and perform an operational heat test.
| Item | Description |
|---|---|
| Connector type | Insulated female terminal(s) designed to accept element spade(s) and mate with OEM terminal spacing. |
| Wire gauge compatibility | Intended for typical cooktop element leads (confirm with service manual; re‑terminate if incompatible). |
| Terminal count | Two or three terminals depending on element configuration-verify before installation. |
| Mounting method | Clip or screw mounting to element bracket to maintain mechanical retention and alignment. |
| Symptoms addressed | Intermittent heating, arcing at terminal, melted insulation, or loose connections at the element. |
Troubleshooting and Diagnostic Procedures: Continuity, Voltage Tests, and Wiring/Connector Inspection
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit provides the electrical interface between a cooktop heating element and the oven wiring harness; its role is to make a low‑resistance, mechanically secure contact so the element receives full line voltage without arcing or heat build‑up at the connection. When the receptacle contact is degraded by corrosion, overheating, or deformation the burner may heat weakly, cycle, or fail entirely; technicians should verify that the connector pin geometry and wire colour/terminal arrangement match the appliance wiring harness before replacement to ensure compatibility and correct phasing of L1/L2 and neutral conductors.
Diagnostic checks combine visual inspection with multimeter continuity and voltage tests. Disconnect power before any continuity checks or connector removal; perform continuity (ohms) tests on the disconnected receptacle and element to confirm low contact resistance (<1 Ω expected across mating contacts) while an element itself will typically present tens of ohms. with the range energized and safe access procedures in place,measure AC voltage at the receptacle: L1-L2 should read approximately 240 VAC in typical U.S.ranges, and each line to neutral should read approximately 120 VAC. Inspect for symptomatic evidence – melting, pitting, black carbon tracks, or loose pins – and perform a gentle wiggle test during measurement to reveal intermittent contacts caused by mechanical play or spring‑pressure loss.
- Common symptoms: intermittent heating, one burner cold, visible burn marks or melted plastic at the connector, arcing sounds.
- Quick checks: with power off, verify continuity across receptacle contacts and element resistance; with power on and safe precautions, verify L1-L2 and line‑to‑neutral voltages at the connector.
- When replacing, transfer wires to the same terminals and confirm secure crimp or screw retention to prevent future high‑resistance joints.
| Item | Description |
|---|---|
| Continuity (receptacle) | With circuit de‑energized, low resistance (<1 Ω) across mating contact points indicates good contact; higher values suggest corrosion or partial contact. |
| Voltage (powered) | L1-L2 ≈ 240 VAC; L1-N or L2-N ≈ 120 VAC depending on configuration – verify under load to detect voltage drop from poor contacts. |
| Visual signs | Discoloration, melted plastic, pitted terminals, or loose pins are indicators for replacement of the receptacle kit. |
Q&A
What is the WB17X5113 cooktop burner receptacle kit and what does it do?
The WB17X5113 is a replacement receptacle/terminal block used on electric cooktops to provide the electrical connection between the internal wiring of the range and a radiant or coil surface element. It holds the element’s terminal and provides the spade/quick‑disconnect connection points so the element can be powered from the oven/cooktop wiring.
How do I know if I need to replace the receptacle kit?
Common symptoms of a failing receptacle include a burner that won’t heat,intermittent heating,visible arcing or sparking at the element connection,a burned or melted receptacle,or a strong burning smell from the cooktop area. If you see physical damage or discoloration at the terminal,or a loose/poor connection,replace the receptacle.
Is WB17X5113 compatible with my GE cooktop/range?
Compatibility varies by model. The safest way to confirm compatibility is to check your appliance model number and cross‑reference it with the GE parts list or the retailer’s compatibility tool.You can also compare the old part’s shape and terminal layout to the new part-make sure the spade terminal size, mounting holes, and overall dimensions match before installing.
Can I replace the receptacle myself, and what safety precautions should I take?
Yes, a competent DIYer or appliance technician can replace it, but you must first disconnect all power to the appliance at the circuit breaker (do not rely on the control panel’s OFF). Allow the cooktop to be cool, and use insulated tools.If you’re not experienced with line‑voltage wiring, hire a qualified technician. After installation, verify secure connections and test with a multimeter if you’re agreeable doing so.
What tools and parts do I need for the replacement, and how long does it take?
Typical tools: flathead and Phillips screwdrivers, nut driver set (often 1/4″-5/16″), needle‑nose pliers, and a multimeter for testing. You may also need a putty knife or trim tool to lift the cooktop glass if applicable.the replacement itself typically takes 20-40 minutes depending on model and access, longer if you’re unfamiliar with disassembling the cooktop.
Do I need to replace the entire surface element or just the receptacle?
Not necessarily. If the element’s terminal post is intact and undamaged, replacing the receptacle alone is usually sufficient.Though, if the element’s terminal is corroded, bent, or burned, replace the element as well. always inspect both mating surfaces and replace any part showing damage to ensure a safe, reliable connection.
How should I test the new receptacle after installation?
After restoring power, visually inspect the connection for secure seating and absence of arcing or unusual smells. Use a multimeter to verify line voltage is present at the receptacle with the burner switch ON (onyl if you are experienced and cautious around live circuits). Then place an element in the receptacle and verify it heats normally. If you observe sparking,overheating,or failure to heat,turn power off and recheck wiring and seating.
Are there any common pitfalls or tips to avoid problems after replacing the kit?
Make sure all spade/quick‑disconnect terminals are fully seated and that mounting screws are tightened but not over‑torqued.Don’t mix different style receptacles and elements-match the terminal size and orientation. Clean any carbonized debris from the element/socket area before reassembly. always confirm the replacement part number matches the OEM suggestion for your appliance model to avoid fitment and safety issues.
Wrapping Up
The WB17X5113 GE oven cooktop burner receptacle kit serves as a critical interface between the appliance wiring and the heating elements, providing a secure electrical connection that supports reliable burner operation and helps prevent arcing, intermittent contact, and related performance issues. As an OEM replacement component, it is designed to match the original specifications for fit, function, and safety, making it an crucial part for maintaining cooktop performance and longevity.
Accurate diagnosis is essential when cooktop burners exhibit symptoms such as inconsistent heating,failure to energize,or visible damage at the receptacle. Confirming the root cause-weather the receptacle, element, wiring, or control-ensures the correct component is replaced and avoids unnecessary repairs. When replacement is warranted, using the appropriate WB17X5113 kit and following manufacturer‑recommended procedures preserves appliance safety and functionality.
Timely and proper replacement of a damaged or degraded burner receptacle can restore normal operation, reduce the risk of further component damage, and maintain safe cooking conditions. For those unfamiliar with appliance electrical work, engaging a qualified technician to perform diagnosis and installation is the most reliable way to ensure the repair is done correctly and in compliance with safety standards.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok