WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is a replacement receptacle adn connector assembly designed for use in GE ovens and cooktops. The kit is a small electrical/mechanical component that provides the interface between the appliance wiring harness and the burner ignition/igniter electrodes; it typically includes the mating terminals, insulated body, and mounting provisions necessary to secure the electrical connection at the burner location.
Inside the appliance the receptacle kit’s role is to maintain a reliable, insulated electrical connection between the ignition system (igniter electrodes or spark module) and the control wiring. It interacts directly with the ignition module, the burner electrode or igniter, and the appliance wiring harness, and must withstand elevated temperatures and occasional voltage transients generated during spark events. Proper function of the receptacle preserves continuity, prevents intermittent connections and arcing, and helps maintain safe operation of the ignition circuit.
In this article readers will find a technical overview of the WB17X5113 part: how it functions in the ignition subsystem, typical locations and compatible appliance families, common failure symptoms to recognize (for example loss of spark, intermittent ignitions, visible terminal damage or melting), diagnostic considerations for testing continuity and visual inspection, and practical replacement considerations such as matching terminal types, heat resistance, secure mounting, and wiring orientation. The details is presented to assist technicians, engineers, and appliance owners in understanding compatibility and service implications without prescribing specific step‑by‑step repair procedures.
Table of Contents
- Function and Electrical Role of the Cooktop Burner Receptacle Kit
- How the WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit Interfaces with Ignition, Switch, and Control Circuits
- Common Failure Symptoms and Diagnostic Tests for Cooktop Burner Receptacle Failures
- Compatibility Matrix, Replacement Part Selection, and Installation Considerations for the WB17X5113 Receptacle Kit
- Q&A
- Final Thoughts
Function and Electrical Role of the Cooktop Burner Receptacle Kit
WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is a receptacle assembly that provides the mechanical and electrical interface between the appliance wiring harness and the cooktop heating element. The kit consists of terminal contacts, a high-temperature insulating body, and mounting features that retain the element lead while isolating live conductors from the surrounding chassis. In service the receptacle establishes the required low-resistance contact for line-voltage delivery to the element or igniter and ensures consistent mechanical retention under thermal cycling and vibration; a worn or deformed contact will increase resistance, produce heat at the joint, and produce the symptoms described below.
- High-temperature insulator and molded body that resists heat degradation.
- Spade or female terminal contacts that accept element studs or harness pins.
- Mounting ear or flange for secure attachment to the cooktop frame.
- Common failure symptoms: intermittent element operation, visible arcing or burn marks, loose or melted plastic, and elevated contact resistance.
Electrically, the receptacle functions as a passive conductor designed for full line-voltage and the cyclic currents of cooktop operation; it must maintain stable contact resistance to avoid localized heating and voltage drop. technicians commonly verify receptacle condition with a continuity check and by measuring voltage at the terminal under load; any notable voltage drop or increased resistance indicates replacement. For compatibility, match the physical terminal type, stud spacing, and insulation geometry to the appliance harness and element; replacing with the correct OEM part number ensures proper fit, safe current capacity, and reliable thermal performance during normal cooking cycles.
| Item | Description |
|---|---|
| Terminals | Conductive contacts that transfer line voltage to the element |
| Insulator | High-temp material that prevents shorting and withstands thermal cycling |
| Mounting | Flange or bracket to secure receptacle to the cooktop frame |
| Diagnostic | Continuity, load voltage measurement, and visual inspection for arcing or melting |
How the WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit Interfaces with Ignition, Switch, and Control Circuits
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit is a passive but critical wiring interface that ties individual surface elements to the cooktop’s ignition, manual switch, and control circuits.It provides dedicated terminals for the spark/ignition lead,the switched hot feed from the infinite (or rotary) control switch,and the neutral/ground connections needed for a complete circuit. In practice, the receptacle routes line voltage to the element onyl when the associated switch closes, and it routes ignition pulses from the spark module to the electrode lead so the burner will light when the control calls for ignition; the part itself does not generate ignition, it only secures and isolates the electrical paths required for correct sequencing and safe operation.
From a service perspective the receptacle’s terminal layout and insulation determine compatibility and safe operation: the switched hot terminal must sustain the element current rating and the ignition terminal must preserve the high-voltage path from the spark module to the electrode without shorting to ground or adjacent pins. Technicians replacing this kit should note wire colour and terminal position, then verify continuity between the switch and element and continuity/no-short between the ignition terminal and chassis ground before reassembly. Practical examples include diagnosing a dead burner (confirming the switched hot continuity through the receptacle) or intermittent sparking (inspecting the ignition terminal seating and insulation). The receptacle’s function is primarily mechanical and electrical routing, so matching the pin arrangement and current/voltage ratings is essential to avoid miswiring or premature failure.
- Ignition terminal - connection for spark module/electrode
- Switched hot – feed from infinite/manual switch to element
- Neutral/common – return path for element current
- Ground/insulation – chassis safety and electrical separation
| Item | description |
|---|---|
| Ignition terminal | Pass-through for spark module high-voltage lead to electrode; must remain isolated from other terminals |
| Switched hot terminal | Receives line voltage from the control switch and supplies the element when closed |
| Neutral/return | Completes the circuit for the heating element and ties to the appliance common |
| housing & mounting | Provides mechanical retention, insulation, and correct pin spacing to prevent cross-contact |
Common Failure Symptoms and Diagnostic Tests for Cooktop Burner Receptacle Failures
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit provides the electrical interface between the appliance wiring harness and a removable surface heating element. This receptacle holds the element terminals, maintains insulation from the cooktop body, and must carry full line voltage while operating at elevated local temperatures; confirm terminal spacing and connector shape for compatibility with the specific GE cooktop model before installation.Typical failure modes are thermal degradation of the housing, corrosion or loosening of the terminal contacts, and deformation that increases contact resistance-each of which can produce intermittent heating, slow heat-up, or visible arcing at the connection.
- Visible symptoms: melted or discolored housing, carbonized terminals, burn marks, or brittle plastic around the receptacle.
- Operational symptoms: one burner not heating, reduced output, intermittent operation, or sparks when an element is moved or touched.
- Basic diagnostic steps: visually inspect with power removed, measure continuity/resistance across the receptacle contacts with the element removed, and measure line voltage at the harness with the control calling for heat.
| Item | Description |
|---|---|
| Continuity / Resistance | Low resistance (near 0 Ω) across mating terminals indicates a good contact; a high or infinite reading indicates an open or high-resistance connection and warrants replacement. |
| Line Voltage | With the control calling for heat expect approximately 240 VAC across the two hot terminals on U.S. split‑phase systems; ~120 VAC from each hot to ground. Absence of expected voltage points to upstream wiring or switch issues rather than the receptacle itself. |
| Visual | Discoloration, pitting, or melted housing are reliable indicators that the receptacle no longer provides safe, low-resistance contact and should be replaced. |
Use a multimeter and follow safe work practices: disconnect power before removing the element or receptacle, verify continuity with the element detached, then verify voltage only with the element disconnected and the control calling for heat if needed. Replace the receptacle if tests show high resistance,visible damage,or if arcing occurred; when replacing,fit the WB17X5113 kit that matches the original terminal layout to restore reliable contact and reduce the risk of repeat failures.
Compatibility Matrix,Replacement Part Selection,and Installation Considerations for the WB17X5113 Receptacle Kit
The WB17X5113 GE Oven Oven Cooktop Burner Receptacle Kit functions as the mechanical and electrical interface between a cooktop heating element and the oven’s wiring harness. It provides insulated terminal connections, a heat-resistant mounting surface, and the correct alignment for the element spade terminals so that element resistance and power delivery remain stable under thermal cycling. Compatibility is governed by the number and spacing of terminals, the mounting footprint, and the element type (such as, sealed radiant elements versus open coil burners), so technicians must match the kit’s physical and electrical characteristics to the oven model and element being replaced.
When selecting a replacement, consult the appliance’s compatibility matrix or parts list to confirm terminal layout and voltage rating; a mismatch in terminal count or orientation can prevent the element from seating properly or create intermittent connections. For installation, first de-energize the appliance and verify wiring with a multimeter, then confirm wire gauge and terminal crimp style are compatible with the receptacle contacts. After mechanical installation, check for secure mounting, correct clearance from adjacent components, and continuity under cold conditions before first heat cycle; if any contacts show high resistance or excessive movement, replace the kit or terminals rather than attempting field modification.
- Verify model number and element type against the parts compatibility list before ordering.
- Inspect terminal count, spacing, and mounting holes on the existing receptacle and the replacement.
- De-energize and measure continuity and insulation before and after installation.
| Item | Description |
|---|---|
| Terminal configuration | Match number,spacing,and orientation of spade terminals to the existing element harness. |
| mounting footprint | Ensure screw hole pattern and clearance align with cooktop sheetmetal and element flange. |
| Voltage and current | Confirm receptacle is used with the cooktop’s rated voltage and element current to avoid overheating. |
| Wire compatibility | Use the correct wire gauge and crimp style for terminals to maintain low contact resistance. |
Q&A
What is the WB17X5113 cooktop burner receptacle kit and what does it do?
The WB17X5113 is a replacement receptacle kit used on GE electric cooktops/ranges. It provides the electrical connection (rapid-disconnect terminals) between the surface heating element and the cooktop wiring/infinite switch assembly. The kit replaces a worn, melted or corroded receptacle housing so the burner element can make a reliable electrical connection.
How can I tell if the receptacle is the problem versus the burner element or switch?
Common signs of a bad receptacle include a single burner that is intermittent or dead while other burners work, visible melting, burn marks or discoloration around the receptacle, arcing or a loose-fitting plug on the element. to isolate the problem: with power off remove the element and inspect the receptacle visually, test the element resistance with a multimeter, and test for continuity through the receptacle. If the element and switch test good but the receptacle shows poor continuity or visible damage, the receptacle is likely at fault.
Is the WB17X5113 compatible with my GE range or cooktop model?
Compatibility depends on your appliance model and the exact receptacle design.The safest method is to confirm by checking your appliance model number and cross-referencing parts lists on the GE Parts website or in the range’s parts diagram. You can also remove the old receptacle and compare part numbers or physical appearance (terminal layout and mounting) to ensure a match before ordering.
Can I replace the receptacle kit myself, and what are the basic steps?
Yes, a competent DIYer can typically replace the kit, but you must follow safety precautions. Basic steps: 1) Disconnect power at the breaker (do not just turn the cooktop off). 2) Pull the cooktop or access panel per your model instructions to reach the receptacle. 3) Note and/or photograph wire and terminal positions.4) Disconnect the element and the wires from the old receptacle (pull off quick-disconnect terminals). 5) Install the new receptacle, reconnect wires to the correct terminals, remount panels, and restore power to test. If you are uncomfortable or unsure at any step, hire a qualified appliance technician.
what tools and safety precautions do I need for replacing WB17X5113?
Tools: screwdriver set,needle-nose pliers,electrical multimeter,and possibly nut drivers. Safety: turn off and lock out the circuit breaker for the range,verify absence of voltage with a metre before touching wiring,wear safety gloves and eye protection,avoid contact with sharp sheet-metal edges,and follow the appliance manufacturer’s service instructions. Never work on live circuits unless you are a trained electrician.
How do I test the new receptacle after installation?
After installing the new receptacle and reassembling the cooktop, first visually confirm proper seating of the element and secure wire connections. With the breaker restored,turn the specific burner on briefly to confirm it heats evenly and consistently. If you prefer electrical verification: with power off you can check continuity across the receptacle terminals; with power on (only if you are trained and pleasant) you can verify expected voltage at the receptacle terminals when the switch is on. Always follow safe testing procedures.
Will replacing the receptacle kit resolve all burner problems, or might other parts also be needed?
Replacing a faulty receptacle will fix problems caused by a bad connection or damaged housing, but not issues caused by a failed surface element, defective infinite/control switch, wiring faults, or control board problems. If the burner still does not work after replacing the receptacle, perform or arrange further diagnostics on the element and switch, or consult an appliance technician.
Final Thoughts
the WB17X5113 GE Oven Oven cooktop Burner Receptacle Kit serves as the electrical interface between the cooktop burner and the oven’s wiring harness, providing a secure, heat-resistant connection that supports reliable ignition and consistent heating performance. As a small but critical component, it helps prevent loose connections, arcing and premature failure of burners, and therefore plays an crucial role in the overall safety and functionality of the appliance.
Proper diagnosis and timely replacement of the WB17X5113 kit are essential to restore safe operation and to avoid collateral damage to other components. Accurate troubleshooting-using the manufacturer’s service information, basic electrical checks, and visual inspection-limits unnecessary repairs, and replacing the receptacle with the correct OEM part and correct installation ensures long-term reliability. When there is any uncertainty about diagnosis or safe installation, engaging a qualified service technician is the professional course of action.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok