134156200 Frigidaire Screw is a specific fastener used in Frigidaire appliances. As a mechanical fastening component, it is intended to secure panels, brackets, assemblies, or electrical components and is characterized by its head style, thread profile, length and material selection appropriate to teh application. While individual specifications (head type, thread pitch, plating or stainless construction) vary by use, the part functions as a standard screw rather than an active electrical or electronic device.
Inside an appliance the screw’s primary role is to provide reliable mechanical retention and maintain alignment between mating parts; it can also serve secondary functions such as establishing a grounding path,compressing gaskets or maintaining thermal contact between components.The screw interacts directly with chassis sheet metal, mounting brackets, control or terminal boards, door assemblies and motors or pumps, and its performance depends on correct thread engagement, torque control, corrosion resistance and material compatibility to avoid galvanic corrosion or stripped threads.Improper fastener selection or installation can lead to vibration loosening,loss of structural integrity,electrical noise or compromised seals.
in this article readers will find a technical examination of the 134156200 Frigidaire Screw covering its intended function and where it is typically used within frigidaire product lines,how to determine compatibility (thread size,length,head type and material),common failure symptoms to watch for (looseness,stripped threads,corrosion,rattles or grounding faults),practical troubleshooting steps (visual inspection,torque verification,thread repair methods) and replacement considerations (matching specifications,OEM versus aftermarket choices,torque recommendations and options for repairing damaged threads or using appropriate locking methods). The guidance is aimed at technicians, engineers and appliance owners who need factual, service-oriented facts for diagnosis and safe replacement.
Table of Contents
- Function and Mechanical Role of the Part in Frigidaire Appliance Assemblies
- How the 134156200 Frigidaire Screw Interfaces with Mounting Points and operates Within the Chassis
- Diagnostic Indicators and Common Failure Symptoms Associated with the 134156200 Screw
- Replacement Considerations, Compatible Models, and Step‑by‑Step Installation Procedures
- Q&A
- The Way Forward
Function and Mechanical Role of the Part in Frigidaire Appliance Assemblies
The 134156200 Frigidaire Screw functions as a precision fastening element within Frigidaire appliance assemblies, providing clamping force, alignment, and in some locations a secondary grounding path to the chassis. In practice this screw secures sheet‑metal panels, bracketry for motors and compressors, hinge interfaces, and control-module mounts; its mechanical role is to maintain preload against vibration and thermal cycling so mating components retain correct position and sealing. Material selection and plating (typically a zinc or cadmium finish over steel) and appropriate thread form determine the screw’s corrosion resistance, torque range, and long‑term retention under cyclical loading in refrigerated environments.
- Head/drive type: matches assembly access (Phillips, Torx, or hex)
- Thread form: sheet‑metal or machine – must match mating thread
- Material/coating: plated steel for corrosion resistance
- Function locations: door hinges, control panels, evaporator covers, mounting brackets
| Item | Description |
|---|---|
| Part number | 134156200 – OEM fastener used in several frigidaire assemblies |
| Intended use | Panel and bracket fastening; alignment and retention under vibration |
| Material/coating | Plated steel (zinc or similar) to balance strength and corrosion resistance |
| Installation note | Drive and torque per OEM specification; avoid over‑tightening to prevent thread stripping or panel distortion |
When replacing or servicing the screw, verify thread type and length against the original part to ensure full engagement without bottoming out or interfering with internal components; mismatched length or pitch is the most common compatibility issue. Use a calibrated driver and the manufacturer’s torque guidance where available, and consider a locking washer or light threadlocker in high‑vibration locations; after reassembly, check component alignment and functional fit (for example, door sash alignment and seal compression) to confirm the screw is performing its mechanical role correctly.
How the 134156200 Frigidaire Screw Interfaces with Mounting Points and operates Within the Chassis
134156200 Frigidaire Screw serves as a dedicated chassis fastener that secures panels, brackets and internal assemblies to the appliance frame by engaging captive nuts, mating nuts, or molded threaded bosses in metal or polymer chassis sections. The mechanical interface-thread form, length, and head geometry-dictates compatibility: an overlong screw can bottom out and fail to clamp, incorrect pitch will cross-thread and damage the boss, and inappropriate head type can prevent proper seating or clearance. Materials and finishes are selected to resist corrosion and reduce galling in the appliance surroundings, while the screw’s tolerance and fit determine whether it acts primarily as a clamping device, an alignment datum, or both.
- Compatibility: match thread pitch, length and head to the original mounting point
- Function: provides clamp force and transmits shear/tensile loads between components
- Installation: seat flush and tighten to firm engagement; avoid overtightening plastic bosses
- Service: replace stripped or deformed screws and consider locking feature for high-vibration locations
When installed within the chassis, the screw establishes preload that resists vibration and thermal cycling; correct preload keeps joints stable and reduces relative motion that leads to wear or fatigue. In practice, technicians should confirm that the screw draws the mating parts together without distorting the panel or crushing a polymer boss-if parts do not align with moderate torque, stop and verify thread fit or length. For repair or replacement, choose a fastener with matching mechanical characteristics and, when necessary, add a washer, locking washer, or appropriate threadlocker to improve retention in areas subject to dynamic loads or frequent servicing.
| Item | Description |
|---|---|
| Thread engagement | Captive nut or molded boss; match pitch and length to avoid bottoming or cross-threading |
| Material/finish | Steel with corrosion-resistant plating or equivalent to prevent galling and corrosion |
| Head/drive | Head geometry affects seating and tool access; select the drive type that fits chassis clearance |
| Primary function | Clamp and align components; transmit shear and tensile loads between assemblies |
Diagnostic Indicators and Common Failure Symptoms Associated with the 134156200 Screw
The 134156200 Frigidaire Screw functions as an OEM fastener designed to provide clamp load and positional control for specific Frigidaire subassemblies. In service it performs two roles: maintaining mechanical alignment between mating parts and transmitting compressive force through the assembly to preserve seals and reduce vibration. its performance depends on correct thread engagement, head integrity, and material/coating compatibility with the surrounding components – degraded plating or mismatched replacement fasteners commonly lead to accelerated wear or corrosion in areas subject to moisture or thermal cycling.
- Audible rattling or intermittent clunking from a cabinet or door
- Visible movement or misalignment of a bracket, hinge, or panel
- Rounded or stripped screw head preventing proper torque
- corrosion at the fastener or thread galling during removal
- Leakage or loss of seal where the fastener compresses a gasket
- Intermittent electrical grounding or poor contact where the screw serves as a ground point
| Item | Description |
|---|---|
| Rattle or movement | Insufficient clamp load or losing thread engagement; inspect for backing out and check torque against service spec |
| Stripped or damaged head | Over-torquing, incorrect driver, or corrosion-induced embedment; replace screw and repair mating threads if needed |
| Leak at sealing surface | fastener length or seating incorrect, or progressive loosening; verify screw length, seating washer, and gasket compression |
Technicians should begin diagnosis with a controlled visual and mechanical inspection: verify head condition, check that the screw engages the correct number of threads, and measure whether the component is secured without excessive preload. Use a calibrated driver and follow the appliance service manual for torque specifications; if the screw is corroded or threads are damaged, replace with an identical specification part (thread pitch, length, head style, and coating). For field repairs, apply a compatible threadlocker or anti-seize only where the service manual allows, and document replaced fasteners and the corrective action to prevent recurrence – for example, a loose hinge screw often manifests as a door seal gap and can be resolved by replacing the fastener with the correct-length 134156200 Frigidaire Screw and restoring proper torque and alignment.
Replacement Considerations, Compatible Models, and Step‑by‑Step Installation Procedures
The 134156200 Frigidaire Screw is an OEM fastener designed for specific attachment points in Frigidaire appliances, typically securing trim, control panels, and hinge assemblies. It functions as a mechanical anchor and in some assemblies doubles as a grounding point; therefore thread form, head style, length, and plating matter as much as diameter. Replace this fastener only with an identical specification or a documented cross-reference to avoid stripped holes, misalignment, or compromised electrical continuity. Match the original thread pitch and head drive to prevent drive cam‑out during service and select a corrosion‑resistant finish for wet or humid compartments.
Installation requires measured steps to preserve mating parts and ensure safe operation: isolate power, use the correct driver, and confirm full thread engagement without deforming panels. If the service manual lists torque values, use a calibrated torque driver; if not available, tighten until the part seats flat and then apply a moderate additional fraction of a turn to secure the joint while avoiding strip‑out. After installation, verify alignment and any grounding path with a continuity check where applicable. Practical examples include replacing a hinge fastener – support the door while removing the old screw to prevent sagging - and installing a control‑panel screw where a threadlocker should only be used when the original assembly specified it.
- Disconnect power and secure the appliance before beginning work.
- Select the correct replacement,matching thread pitch,length,and head style.
- Support the component (door, panel, or bracket) to maintain alignment during removal and installation.
- Clean mating threads, inspect for damage, and chase threads if necessary before fitting the new screw.
- Install with the correct driver; tighten to factory torque or until the part seats, avoiding overtightening.
- Verify mechanical operation and, if relevant, electrical continuity of any grounding path.
| Item | Description |
|---|---|
| Part | 134156200 Frigidaire screw – OEM fastener used in multiple Frigidaire assemblies |
| Head/Drive | Match original head style (e.g., Phillips, Torx, or hex) to avoid cam‑out |
| Thread/length | Must match thread pitch and length to ensure proper engagement and avoid damage |
| material/Finish | Typically steel with plated finish; select corrosion‑resistant finish for humid locations |
| Typical applications | Trim, control panels, door hinges, brackets – sometimes provides grounding |
| Tightening guidance | Use manufacturer torque if available; otherwise tighten until seated and secure without strip‑out (use a calibrated torque driver where precision is required) |
Q&A
What is Frigidaire part 134156200?
Frigidaire part 134156200 is an OEM replacement screw used by Frigidaire in one or more appliance assemblies. It is a factory-specified fastener sold as a service part to replace damaged, missing, or corroded screws used in the appliance’s panels, brackets, or components.
Which Frigidaire appliances or models use this screw?
The same screw part number can be used across multiple Frigidaire models and appliance types (ranges, refrigerators, dishwashers, washers/dryers, etc.). There is no single list in this answer – to confirm whether 134156200 fits your unit, check the parts diagram for your exact appliance model number or search the part number on Frigidaire’s parts site or an authorized parts dealer.
How do I know if I need part 134156200?
Compare the screw in your appliance to the parts list or diagram for your model. if the parts diagram calls out 134156200 for the location where the screw is missing or damaged, order that part. You can also remove the screw (if still present) and compare head style,length,diameter,and thread type against the replacement listing or a photo from a parts supplier.
What are the screw’s specifications (size, head type, thread)?
Manufacturer listings for the part number typically identify it simply as a “screw” and the exact specification can vary by application. If the parts catalog does not list detailed specs,measure the original screw: diameter (mm or gauge),length (from under the head to the tip),head style (Phillips,Torx,pan,hex,etc.), and thread type (coarse sheet-metal thread vs. machine thread). If you’re unsure how to measure,supply the appliance model number to an authorized parts dealer and they can confirm the exact spec for 134156200 on your unit.
Can I replace 134156200 with a generic screw?
Yes-if the replacement matches the OEM screw’s size, length, thread form, head style, and material (or better), a compatible generic screw will usually work. Though, use caution: the wrong thread or length can strip holes or interfere with components, and using inferior materials in moist or high-heat areas can cause corrosion. For safety-critical or warranty-covered repairs, the OEM part is recommended.
How should I install the screw and what torque should I use?
Turn off and unplug the appliance (and shut off gas/water if applicable) before servicing. Use the correct driver bit that fits the screw head to avoid cam-out. Install the screw straight and snug it until the component is secure; avoid overtightening-sheet-metal and self-tapping screws typically require only light to moderate torque. If a specific torque value is required, follow the service manual. Do not use excessive power-tool torque; hand-tighten the final turns or use a torque-limiting driver if available.
where can I buy part 134156200?
Buy directly from Frigidaire’s official parts website, from authorized Frigidaire parts dealers, or reputable appliance-parts retailers online. you may also find the part on general marketplaces, but verify the seller and that the part number exactly matches. When in doubt, provide your appliance model number to the parts supplier to confirm compatibility.
What should I do if the screw is stripped, corroded, or won’t come out?
Safety first: disconnect power and any utility connections. For a stuck screw,apply penetrating oil and let it soak,use the correct-sized driver to minimize slipping,and try backing it out gently. For stripped heads,use a screw extractor or a tool designed for damaged fasteners. If the mating threads in the panel are damaged,you may need a replacement clip,nut,or a threaded insert. If you’re not comfortable with extraction or if the screw holds electrical components, consider contacting a qualified appliance technician.
The Way Forward
The 134156200 Frigidaire Screw, while small and often overlooked, performs a critical fastening role within compatible Frigidaire appliances. It secures panels, brackets and internal components, maintains alignment and grounding, and helps control vibration and sealing where applicable. because of its function, the condition and correct installation of this screw contribute directly to appliance performance, safety and long‑term reliability.
Proper diagnosis and,when necessary,timely replacement of the 134156200 Frigidaire Screw help prevent secondary damage and preserve intended operation. Inspect for corrosion, stripped threads, wear or incorrect fit, verify part identification and follow manufacturer torque and installation guidance. When there is any uncertainty about compatibility or the required procedure, consult the appliance’s service documentation or a qualified technician to ensure replacement is correct and effective.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok