316272000 Frigidaire Igniter and orifice Holder is a combined ignition and fuel‑delivery component used in gas cooking appliances; it typically consists of an electrode or hot‑surface igniter assembly coaxially mounted with a threaded orifice holder that locates the gas jet for a burner. The assembly is a mechanical and electrical subcomponent-frequently enough constructed from metal with insulating ceramics and electrical connectors-that secures the orifice in the burner box, positions the igniter relative to the burner ports, and provides the interface to the appliance’s gas manifold and ignition wiring harness.
Within the appliance, the igniter and orifice holder work at the intersection of the ignition and fuel metering systems: the orifice determines the volumetric gas flow (and thus nominal Btu input) by presenting a calibrated orifice to the manifold pressure, while the igniter provides the energy to initiate combustion at the burner ports. The assembly interacts directly with the gas valve/manifold, burner head, flame sensing/ignition control circuits, and the chassis mounting points; correct alignment, orifice sizing, and electrical continuity are essential for proper flame stability, combustion characteristics, and safe shutoff behaviour.
This article will explain the component’s function in detail, describe how to verify model compatibility and correct orifice sizing, and outline common failure symptoms such as no ignition, delayed ignition, weak or yellow flames, or intermittent burning. It will also cover diagnostic considerations-what measurements and observations to take when isolating ignition versus fuel‑delivery faults-and practical replacement considerations including matching part numbers, mechanical mounting, sealing, and safety checks to perform after installation.The focus is technical and diagnostic rather than promotional, to support technicians, engineers, and informed appliance owners in assessing and servicing the component.
Table of Contents
- Function and Role of the Igniter and Orifice Holder in Frigidaire Gas Appliances
- How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance
- Common Failure Symptoms and Diagnostic Indicators for the Igniter and orifice Holder
- Replacement, Compatibility, and installation Procedures for the 316272000 Frigidaire Igniter and Orifice Holder
- Q&A
- concluding Remarks
Function and Role of the Igniter and Orifice Holder in Frigidaire Gas Appliances
The 316272000 Frigidaire Igniter and Orifice Holder is an integrated ignition assembly that both locates the spark electrode relative to the burner and secures the gas orifice that meters flow to the burner. The igniter provides the required spark at a controlled electrode gap while the orifice holder positions a precisely sized orifice and seals it against the manifold; correct mechanical alignment and sealing ensure reliable spark transfer and prevent gas leakage. The assembly typically consists of a ceramic-insulated electrode, a metal mounting bracket, and a threaded orifice holder that accepts the OEM orifice, so dimensional accuracy and orientation are critical for consistent ignition and flame geometry across compatible Frigidaire range and oven models.
Functionally, the igniter must receive the appliance ignition voltage and create a repeatable spark at the intended gap while the orifice maintains the designed pressure drop and volumetric flow for proper air-fuel ratio. Symptoms of a failing or misinstalled assembly include repeated sparking without ignition,delayed ignition,a weak or sooty (yellow) flame,or intermittent burner operation; these indicate issues such as electrode misalignment,a fouled or obstructed orifice,or a mismatched orifice size. For troubleshooting, technicians check electrode position, verify igniter continuity, inspect and clean the orifice passage, and replace the assembly with the correct OEM part to maintain specified orifice diameter and mounting orientation-small deviations in orifice size or holder position change combustion characteristics and can degrade performance or increase incomplete combustion.
- Common symptoms: repeated spark with no flame, delayed ignition, weak/yellow flame.
- Quick checks: electrode gap/position,igniter continuity,orifice cleanliness,secure seating.
- Installation note: use the correct OEM orifice size and orientation for the model to preserve combustion balance.
| Item | Description |
|---|---|
| Component | Electrode, ceramic insulator, bracket and threaded orifice holder |
| Primary function | Position spark electrode and secure the gas orifice for metered flow |
How the 316272000 frigidaire Igniter and Orifice Holder Works Inside the Appliance
The 316272000 Frigidaire Igniter and Orifice Holder is a combined electrode-and-jet assembly that secures the fuel orifice and positions the spark electrode relative to the burner flame. In operation the electrode receives high-voltage pulses from the ignition module to create a spark at a controlled gap while the orifice holder aligns and seals the gas jet into the burner tube. The assembly typically mounts directly to the burner carriage with mechanical fasteners that also provide the chassis ground; the ceramic or glass insulator isolates the live electrode from the metal holder to maintain reliable spark energy under repeated thermal cycling.
During a normal ignition cycle the control board energizes the ignition transformer, the electrode produces repeated sparks at the tip, and the orifice holder maintains consistent gas flow and jet geometry so the flame will light promptly and stably. Faults manifest as delayed ignition,continuous clicking without flame,or a weak/sooty flame caused by a blocked orifice,misaligned electrode gap,or cracked insulator. The part is specific to certain Frigidaire gas ranges and ovens, so fitment must match the mounting points, orifice size, and electrical connector of the appliance; technicians typically verify continuity of the electrode lead, inspect the spark gap visually, and confirm unobstructed gas flow when diagnosing ignition problems.
- Ceramic/glass insulator: isolates electrode and maintains spark integrity
- Orifice seat: secures the jet and preserves correct gas jet geometry
- Mounting tabs/ground path: provide mechanical registration and chassis grounding
- Common failure symptoms: repeated clicking, delayed ignition, weak or sooty flame
| Item | Description |
|---|---|
| Ignition method | Intermittent high-voltage spark provided to electrode tip |
| Materials | Ceramic/glass insulator, plated steel or stainless holder |
| Mounting | Secures to burner assembly; must match appliance mounting points |
| Diagnostic checks | Visual gap inspection, continuity test, verify unobstructed orifice |
Common Failure Symptoms and Diagnostic Indicators for the Igniter and Orifice Holder
The 316272000 Frigidaire Igniter and Orifice Holder is a combined mechanical and electrical subassembly that positions the spark electrode relative to the burner orifice while securing the orifice in the burner bowl.It’s function is twofold: to maintain a precise electrode-to-orifice geometry for repeatable spark location, and to hold the gas orifice in correct alignment so the jet produces the intended flame shape. Compatibility is determined by the thread size and mounting flange, the electrode lead/connector style, and the orifice sizing; replacements must match the original mounting and connector types to preserve ignition timing and flame characteristics.
Common diagnostic indicators combine visual, electrical, and functional checks. Physically inspect the ceramic insulator and electrode tip for cracks, erosion, or carbon tracking; inspect the orifice for particulates or deformation. Electrically, verify the connector is secure and test continuity back to the control; observe the spark while actuating the control to confirm timing and gap behavior. Practical examples: persistent sparking with gas flowing typically indicates a grounded electrode or damaged insulation, while delayed ignition with a strong gas odor suggests a weakened spark or partial orifice obstruction; intermittent ignition often tracks to loose mounting or a cracked insulator that conducts only under certain thermal or moisture conditions.
- no spark at electrode: open wiring, broken electrode, or connector mismatch.
- Weak or delayed ignition: electrode gap error, fouled orifice, or degraded spark energy.
- Continuous sparking with gas present: grounded electrode or damaged insulator.
- Irregular flame shape or lift: incorrect orifice sizing or misalignment in the holder.
| Item | Description |
|---|---|
| Visible damage | Cracked ceramic, bent electrode, or clogged orifice affecting spark and flow. |
| Electrical indicator | Loss of continuity or erratic connector contact to control module; intermittent behavior under vibration. |
| Functional symptom | No ignition, delayed ignition, or continuous sparking correlating to electrode position and insulation condition. |
Replacement, compatibility, and Installation Procedures for the 316272000 Frigidaire Igniter and Orifice Holder
The 316272000 Frigidaire Igniter and Orifice Holder integrates the ignition electrode mounting with the gas orifice retention, maintaining the precise spatial relationship between spark source and burner port required for consistent ignition. In operation, the metal bracket and ceramic insulator hold the igniter electrode at a controlled distance and angle from the burner face while the orifice body secures the gas jet; any axial or radial misalignment alters flame shape, ignition timing, and combustion stability. Common failure modes are cracked ceramic insulators, loosened orifice threads, or electrode erosion that increases ignition delay or produces a weak, lifting flame. For technicians, visual inspection of electrode tip condition, emitter-to-orifice clearance, and orifice cleanliness usually identifies whether the assembly itself needs replacement or if upstream fuel pressure/valve issues are present.
- Safety first: shut off gas supply and electrical power before disassembly.
- Document connector locations and orientation; most Frigidaire connectors are single spade terminals or insulated quick-disconnects.
- Remove burner cap and retaining screws; inspect the orifice for carbon buildup and the mounting holes for stripped threads.
- Replace the assembly if ceramic is cracked, electrode is severely worn, or the orifice threads are damaged; confirm replacement part matches physical mounting pattern and orifice diameter.
- Reassembly: hand-start screws, tighten evenly to seat the holder, restore gas and power, then verify ignition quality and perform a leak check at the gas connection.
| Item | Description |
|---|---|
| Orifice diameter | Stamped orifice size should match appliance specification; verify against service data or original part to maintain correct fuel flow. |
| Electrical connector | Typically insulated spade/quick-disconnect; confirm polarity and secure connection to prevent intermittent sparks. |
| Mounting and alignment | Bracket orientation controls electrode-to-port clearance; ensure stable seating and no lateral play after tightening. |
Q&A
What is the Frigidaire part 316272000 (igniter and orifice holder) and what does it do?
Part 316272000 is a combined igniter electrode assembly and orifice holder used on many frigidaire gas ranges and cooktops. The igniter provides the spark (or in some designs the ignition electrode) that lights the burner,while the orifice holder secures the gas orifice/nozzle in front of the valve and positions the flame opening. Together they control and initiate the burner flame.
What are common symptoms that this part has failed and needs replacement?
Common signs include one or more burners failing to light, intermittent sparking without ignition, continuous clicking when the control is turned off, a weak or irregular flame, visible cracking or carbon tracking on the ceramic insulator, or a corroded/clogged orifice holder.If cleaning wiring and the ignition module does not restore operation, the igniter/orifice holder assembly is a likely cause.
How can I diagnose whether the igniter/orifice holder is the problem?
Start with a visual inspection: look for cracked ceramic, carbon tracking, corrosion, or a clogged orifice. Listen for the spark when you turn the burner on-if you see or hear spark at the electrode but gas does not ignite, the orifice may be clogged or the gas valve may not open. If there is no spark, confirm power to the cooktop and check wiring connections and the ignition module. A multimeter continuity check of the igniter wiring can help find open circuits, and measuring for proper voltage from the ignition module (by a qualified person) can confirm module operation. Because gas and high-voltage circuits are involved, follow safety precautions or call a technician.
Is this part user-replaceable? What are the basic replacement steps?
many experienced DIYers can replace 316272000, but gas work carries safety risks. Basic steps: 1) Disconnect electrical power to the appliance and turn off the gas supply. 2) Remove the cooktop or range top to access the burner assembly. 3) Unplug or disconnect the igniter wiring and remove the fasteners holding the orifice holder/igniter. 4) Remove the old orifice or nozzle if transferring or changing fuel type, and install the new assembly in reverse order. 5) Reconnect gas and power, check for leaks and proper ignition. If you are not comfortable or licensed to work on gas appliances, hire a qualified technician.
Do I need a different orifice for natural gas versus LP (propane), and how does that affect this part?
Yes. Orifice size determines gas flow and must match the fuel type and burner design. The orifice holder accepts the orifice/nozzle sized for either natural gas or LP. When converting fuel types you must install the correct orifice(s) and, if required by the manufacturer, change other components and adjust valves. Always follow the appliance manufacturer’s conversion instructions and local codes; conversions are best performed by a qualified service technician.
How do I safely test the igniter without damaging the appliance or risking injury?
Safety first: shut off gas and power before doing any disassembly. For non-invasive checks you can: visually inspect the electrode and wiring, turn on a burner and observe whether the electrode sparks (do this only with power on and without touching internal parts), and listen for clicks.Use a multimeter to check continuity of wiring with power off. Do not probe high-voltage ignition leads with ordinary test equipment while the unit is energized unless you are trained and use proper equipment.For voltage or spark-system diagnostics, consider hiring a trained technician.
How long does the igniter/orifice holder typically last, and can it be cleaned instead of replaced?
Longevity varies with use and habitat; electrodes and orifice holders can last many years but will eventually fail from cracking, carbon tracking, corrosion, or clogging.In some cases you can clean carbon deposits and minor debris from the orifice and electrode to restore operation, but damaged ceramic, severe corrosion, or worn electrodes require replacement. Cleaning should be done carefully with the gas off and following manufacturer guidance.
How do I confirm that part 316272000 is the correct replacement for my Frigidaire model?
Check your appliance model number (usually on a tag behind the oven door, under the cooktop, or on the control panel) and cross‑reference it with the Frigidaire parts list or the part seller’s compatibility chart. You can also contact frigidaire customer support or an authorized parts dealer with the model number to confirm fitment. Using the exact OEM part ensures proper fit, orifice size options, and safe operation.
Concluding Remarks
The 316272000 Frigidaire Igniter and Orifice Holder serves a critical role in gas-fired cooking appliances by initiating reliable ignition and maintaining correct gas flow to the burner. As integral components of the ignition system,they directly affect burner performance,fuel efficiency,and safe operation; when functioning properly,they help ensure consistent lighting,stable flames,and predictable appliance behavior.
Accurate diagnosis and timely replacement of a worn or faulty 316272000 Frigidaire Igniter and Orifice Holder are critically important to restore optimal performance and reduce the risk of secondary issues.Proper identification of symptoms, use of the correct OEM part, and adherence to manufacturer service procedures-or engagement of a qualified technician-minimize the likelihood of misdiagnosis, improper installation, or safety concerns that can arise from incorrect repairs.
Maintaining or replacing the igniter and orifice holder as required supports appliance longevity, energy efficiency, and occupant safety. Where questions or concerns arise, following manufacturer guidance or consulting a trained service professional is the most reliable way to ensure the appliance is returned to safe and effective operation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok