316112005 Frigidaire Oven Range Anti Tip Bracket Kit is a mechanical safety assembly intended to secure a freestanding or slide‑in range to the building structure to prevent forward tipping. The kit typically consists of a stamped steel bracket and fasteners designed to attach to the appliance chassis and an anchor point in the floor or wall; it is an OEM replacement part used where the manufacturer requires an anti‑tip device as part of the installation.
Within the appliance system the anti‑tip bracket provides a load path from the range chassis to the building structure, resisting the moment created when the oven door is opened or when weight is applied to the open door. It interfaces directly with the range back frame, the leveling leg/location points and the anchor substrate (wood floor, concrete or wall stud), and indirectly affects service access to electrical and gas connections by limiting allowable rearward movement. Proper mounting and alignment are therefore significant both for mechanical safety and to avoid undue stresses on adjacent connections.
In this article you will find a technical overview of the 316112005 kit including its intended function and typical installation locations, compatibility notes for common Frigidaire freestanding and slide‑in models, common failure symptoms to watch for (excessive forward movement, rocking, loose or missing hardware, corrosion), step‑by‑step troubleshooting checks (visual inspection, verification of anchor point, adjustment of leveling legs, simple load tests) and practical replacement considerations (substrate requirements, correct fastener selection, OEM part fit and installation torque guidance and safety precautions). The content is aimed at technicians, engineers and appliance owners who need to assess, install or replace the anti‑tip device in accordance with manufacturer instructions and local safety codes.
Table of Contents
- function and Role of the Anti‑Tip Bracket in Range Stability and User Safety
- How the 316112005 Frigidaire Oven Range anti Tip Bracket Kit Interfaces with range Chassis, Mounting Points, and Floor Anchors
- Diagnostic Indicators and Common Failure Symptoms of a Compromised Anti‑Tip Bracket Assembly
- Replacement Considerations, compatibility, and Step‑by‑Step Installation Procedures for the Anti‑Tip Bracket Kit
- Q&A
- The Conclusion
Function and Role of the Anti‑Tip Bracket in Range Stability and User Safety
The 316112005 Frigidaire Oven range Anti Tip Bracket Kit is a purpose‑built mechanical restraint that prevents a range from rotating forward when a horizontal overturning moment is applied. It is indeed a small steel bracket that attaches to a structural substrate (floor, subfloor, or cabinet) and engages the rear heel or leveling leg of the range; under load the bracket provides a reaction force that converts the tipping moment into shear and bearing loads on the fasteners and substrate rather than allowing the appliance to pivot. In practical terms,the bracket limits forward rotation when weight is applied to an open oven door,when cookware on an open door creates an outward moment,or if a person leans or stands on the door; correct alignment between the bracket and the range heel is required for the restraint to engage under these conditions.
- Mounting substrate: wood joist, subfloor, concrete, or cabinet framing – select fasteners appropriate to substrate.
- Engagement: bracket must contact range heel at full range placement and after any flooring changes or adjustments.
- Inspection: verify tightness and position whenever the range is moved for service.
- Limitations: bracket resists overturning moments but does not affect lateral sliding or replace proper leveling and secure installation of the appliance.
During installation and maintenance, ensure the bracket is secured with the manufacturer‑specified hardware and that the load path transfers to structural members; mounting into drywall only will significantly reduce the device’s effectiveness. For example, on a standard 30‑inch range the oven door open to 90° shifts the center of gravity forward by several inches, increasing the moment arm - the anti‑tip bracket intercepts that moment at the rear and prevents lift at the front leveling feet. Technicians should check fitment of the kit against the specific Frigidaire model being serviced, re‑engage the bracket after flooring or cabinet modifications, and document the anchor type used so future service personnel understand the bracket’s installed condition.
| Item | Description |
|---|---|
| Material | Stamped/formed steel bracket, corrosion‑resistant finish |
| Mounting location | Floor/subfloor, cabinet frame, or concrete slab using appropriate fasteners |
| Primary function | Resist forward overturning moment by engaging range heel and transferring load to structure |
| Typical check | verify bracket‑to‑heel contact and fastener torque after installation or appliance movement |
How the 316112005 Frigidaire Oven Range Anti tip Bracket Kit Interfaces with Range Chassis, Mounting Points, and floor Anchors
The 316112005 frigidaire Oven Range Anti Tip Bracket Kit is a formed-steel bracket assembly designed to mechanically link the oven frame to a secure point on the floor, preventing forward rotation of the appliance under load. The bracket interfaces directly with the appliance’s stamped or bolted rear range chassis by engaging a factory mounting tab or bolt boss; a slotted hole in the bracket provides fore/aft and small vertical adjustment so the lip of the bracket reliably captures the chassis when the range is rolled into position. Proper engagement requires that the bracket fastener passes through the bracket slot and into the chassis attachment point with the specified fastener size and thread form so that the chassis-to-bracket connection resists shear and pull-out forces created during normal use (for example, when a loaded oven door is opened).
Once attached to the chassis the bracket transfers overturning loads into a floor anchor, creating a continuous load path from oven frame → bracket → anchor → structural substrate. Compatibility depends on two things: the presence and geometry of the chassis mounting point (distance from floor, tab thickness, and hole/boss diameter) and the floor construction beneath the range. On a wood subfloor the anchor should be a lag screw into blocking or a joist; on concrete use a properly sized masonry anchor or wedge. For practical verification, center the range, install the bracket and anchor, torque fasteners to the recommended values, then pull the range forward slightly to confirm the chassis lip fully engages the bracket; if the factory mounting point is absent or deformed, option attachment (such as welding or chassis reinforcement) is required to achieve equivalent restraint.
- Key interface considerations: correct chassis engagement, appropriate fastener type and size, anchor selection for floor substrate, alignment/clearance, and verification of mechanical engagement.
| Item | Description |
|---|---|
| Bracket | formed steel piece with slotted hole and capture lip that mates to chassis mounting tab. |
| Fasteners | Machine screw or sheet-metal fastener specified for chassis boss; torque to resist shear and pull-out. |
| Mounting point | Factory-stamped tab or bolt boss on rear of range; must be present and undamaged for OEM fit. |
| Floor anchor | Lag or masonry anchor selected for substrate; provides the structural reaction point for overturning loads. |
Diagnostic Indicators and Common failure Symptoms of a compromised Anti‑Tip Bracket Assembly
The 316112005 Frigidaire Oven Range anti Tip Bracket Kit is a mechanical safety device that anchors the rear of a range to the floor or wall to prevent forward rotation when the oven door is opened or when weight is applied to the open door. In service,a functioning anti‑tip bracket transfers overturning loads into the building structure through a fixed anchor and a steel bracket; compatibility depends on the range’s rear clearance,base trim configuration,and the type of subfloor or wall construction. Technicians should confirm the appliance model and mounting geometry before installing this kit, and check that supplied fasteners and anchor types match the substrate (wood floor, concrete slab, or metal base) to ensure the bracket achieves rated pullout strength and correct mechanical engagement with the range chassis.
- Unexpected forward movement or tipping of the range when the oven door is opened.
- Visible gap or lift at the rear of the range revealing separation from the bracket or floor contact.
- Deformed,bent,or cracked bracket components or elongated mounting holes indicating shear or cyclic overload.
- Loose, missing, or corroded anchor fasteners; anchors that pull out of the substrate under manual force.
- Audible rattling or clunking from the base during normal operation, suggesting play in the bracket-to-chassis interface.
Diagnosing a compromised anti‑tip assembly requires visual inspection and simple mechanical checks: remove the toe kick or access panel to inspect bracket geometry and fastener integrity, verify that welds and bends are intact, and attempt a controlled loading test by applying a steady forward force to the upper portion of the closed door while an assistant observes for rotation or anchor movement. For mounting failures, document the substrate type and measure embedment depth and fastener length-replacement should use anchors rated for the observed substrate and restore rigid contact between bracket and range chassis. Practical examples include ranges that shift after heavy cookware is placed on an open door (indicating insufficient anchoring) and installations where shallow concrete anchors pull out because the supplied fasteners were undersized or incorrectly installed.
| Item | Description |
|---|---|
| Door-induced tipping | Bracket missing, loose mounting screws, or anchor pullout allows forward rotation under door load. |
| Deformed bracket | Bent or cracked steel indicates prior overload or impact; bracket should be replaced and substrate checked. |
| Loose fasteners | Corroded or missing hardware reduces shear capacity; replace with correct grade and length per substrate. |
Replacement Considerations, Compatibility, and Step‑by‑Step Installation Procedures for the Anti‑tip Bracket kit
The 316112005 Frigidaire Oven Range Anti Tip Bracket kit is a mechanical restraint intended to arrest forward rotation of a range when a load is applied to the open oven door or when a person stands on the door. Functionally the kit provides a fixed anchor point that mates with the range chassis or an anti‑tip tab on the rear of the appliance; mounting can be to a floor surface,wall stud,or masonry substrate depending on cabinet construction. Compatibility depends on the range base design,rear clearance,and the position of leveling legs or mounting flanges-verify that the bracket can engage the appliance at its installed height and that the included fasteners are appropriate for your substrate. in practice technicians must confirm model‑to‑kit fit by comparing the range’s rear chassis features and by measuring the distance from the back of the range to the finished wall or floor to determine whether the bracket will capture the anti‑tip tab or lip once the range is pushed into final position.
Installation is a mechanical procedure: disconnect power and gas,position the bracket at the required location,secure it with a fastener appropriate for the substrate,set the range to final height,and move the range until the factory anti‑tip engagement point seats into the bracket. Use wood screws or lag bolts into studs for timber framed walls, and use appropriate masonry anchors for concrete or tile floors; verify engagement by opening the oven door and applying a moderate horizontal force to the front center of the appliance. Practical items to check on replacement or retrofit include adjusting leg height before final mounting, replacing stripped fasteners, and ensuring the bracket does not interfere with leveling adjustments or gas lines.Typical tools and verification steps are outlined below.
- Verify model‑to‑kit compatibility and measure rear clearance before ordering or installing.
- Required tools: drill/driver,stud finder,appropriate drill bits,level,torque wrench or driver for final fasteners.
- Mount options: stud/wood floor with lag screws, concrete with expansion anchors, or supplied self‑tapping screws where applicable.
- Verification: set range to final height, engage bracket, open oven door and test for movement; re‑secure if any play is observed.
| Item | Description |
|---|---|
| Part | 316112005 Frigidaire Oven Range Anti Tip Bracket Kit |
| function | prevents forward tipping by mechanically capturing the appliance rear anti‑tip feature |
| mounting | Wall stud,wood floor,or masonry with appropriate fasteners |
| Compatibility | designed for many Frigidaire freestanding/slide‑in ranges; verify chassis engagement and clearance |
Q&A
What is the Frigidaire part 316112005 anti-tip bracket kit and why is it critically important?
The 316112005 anti-tip bracket kit is a manufacturer-supplied device designed to anchor a freestanding or slide‑in range to the floor or wall so the appliance cannot tip forward. Anti-tip brackets are a safety feature required by most building codes and appliance manufacturers to prevent the range from tipping when weight is placed on an open oven door, which can cause injury or burns.
Which Frigidaire models is part 316112005 compatible with?
This kit is intended for many Frigidaire freestanding and slide‑in electric and gas ranges, but compatibility can vary by model and production date. Always check the range’s installation instructions or the parts list for your specific model number, or contact Frigidaire customer support, to confirm that 316112005 is the correct bracket for your appliance.
What hardware is included in the kit and what tools will I need to install it?
Most anti‑tip kits, including Frigidaire’s 316112005, include a metal bracket and a selection of mounting screws/anchors appropriate for common subfloors or walls. Common tools needed are a drill with appropriate bits, screwdriver or socket set, tape measure, pencil, and possibly a hammer and masonry bits or wall anchors if fastening to concrete or masonry.Always inspect the kit contents and read the included instructions before beginning.
How do I install the anti-tip bracket?
general installation steps: 1) Move the range out from the opening and locate the recommended mounting point on the floor or wall per the instructions. 2) Fasten the bracket to the floor (or wall stud) using the appropriate screws/anchors for your substrate (wood subfloor, concrete, tile, etc.).3) Slide the range back into place so the bracket engages the rear leveling leg or the back flange on the range. 4) Verify engagement and that the range cannot tip forward. Follow the manufacturer’s step‑by‑step sheet included with the kit for model‑specific details.
Can I mount the bracket to tile or concrete floors, and which anchors should I use?
Yes, but you must use anchors appropriate for the material. For tile over concrete, use a proper masonry bit and concrete anchors or sleeve anchors sized per the instructions. For tile over wood subfloor, it’s best to fasten into the subfloor or a floor joist using wood screws; if you can’t reach structural wood, use heavy‑duty anchors rated for the load. If you are unsure which anchors to use, consult the installation guide or a professional installer.
Do I need to disconnect gas or electricity to install the anti-tip bracket?
Installation normally involves moving the appliance and attaching the bracket to the floor or wall and does not require disconnecting gas or electrical supply. however, for safety while pulling the range out and working behind it, it is recommended to shut off the gas supply and/or unplug the range or switch off the breaker so there is no risk of accidental contact with live connections or gas lines. If you are uncomfortable moving the range, hire a qualified technician.
How can I tell if my anti-tip bracket is properly installed or needs replacement?
After installation, perform a simple test: open the oven door and apply moderate downward/forward pressure at the center of the door; the range should remain stable and should not tip. Visually inspect the bracket for cracks, bent metal, loose fasteners or corroded anchors. If the bracket does not engage the range’s rear leg, is damaged, missing hardware, or the range rocks forward, replace or repair the bracket instantly. Use the OEM replacement (such as 316112005 if compatible) rather than improvised parts.
If I don’t have the original bracket, can I use a generic anti-tip bracket instead of part 316112005?
A compatible OEM bracket is preferred because it is designed for the range’s specific rear leg geometry and mounting clearances. Generic brackets may work if they securely engage the range and are installed per a professional’s guidance,but ensure they meet local code requirements and manufacturer recommendations.When possible, obtain the exact Frigidaire part 316112005 or confirm compatibility with Frigidaire or a certified technician before using an alternative.
The Conclusion
The 316112005 Frigidaire Oven Range Anti Tip Bracket Kit plays a focused but essential role in kitchen safety by securing the range to the floor or wall and reducing the risk of the appliance tipping during normal use or when weight is applied to an open door. Proper installation of this OEM bracket kit helps maintain the appliance’s designed stability, supports compliance with manufacturer guidance and common installation practices, and contributes to preventing injury and property damage associated with tip-over events.
Because the effectiveness of an anti-tip device depends on correct mounting and the condition of the hardware, routine inspection and accurate diagnosis are important. If the bracket is missing,damaged,loose,or if the range exhibits movement or instability,prompt replacement with the appropriate 316112005 kit and adherence to the manufacturer’s installation instructions-or consultation with a qualified service technician-ensures the safety function is restored and maintained.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok